Songlim Machinery

Year of construction: 2016, condition: good (used), • Piston diameter: 1 m • Maximum pressing force: 2,000 tons • Manufacturer: Tecnindustria srl (Italy) Dujdpfjytc Shjx Adasp • Dimensions (approx.): Length: 3 m in pressing/driving direction Width: 4 m Height: 6 m

Condition: good (used), Used hose crimping machine from Finn Power Lillbackan Konepaja Dodpfx Adjytb D Aoaoup Type: P 32 RAE Including various dies up to 52 mm diameter Capacity up to 78 mm (excluding dies)

Condition: excellent (used), selection of AMADA PROMECAM press brakes for sale ranging from 50 tonne plus call or email for inquiries Duodpfxeyryqlo Adasp

Year of construction: 1973, condition: ready for operation (used), A single-column eccentric press Edelhoff including transfer unit is available. Press force: 130t, stroke adjustment: 30mm-130mm, ram adjustment: 75mm, stroke rate: 45/min, table dimensions X/Y: 1000mm/700mm, weight: approx. 5000kg. An on-site inspection is possible. Duedpfx Adsyq R D Tjaep

Condition: ready for operation (used), Press force: 250kN, ram stroke: 8mm-80mm, stroke rate: 180/min, installation height: 310mm, table dimensions X/Y: 550mm/400mm, ram dimensions X/Y: 355mm/220mm, machine dimensions X/Y/Z: approx. 1100mm/1400mm/2300mm, weight: approx. 2500kg. An on-site inspection is possible. Dsdpjyq R Edofx Adasup

Year of construction: 1981, condition: ready for operation (used), Press force: 650kN, Stroke: 150mm, Pressure piston diameter: 190mm, Column spacing X/Y: 950mm/460mm, Installation height: 500mm, Table dimensions X/Y: 900mm/870mm, max. stroke: 150mm, Operating pressure: 200bar, Machine dimensions X/Y/Z: approx. 1500mm/1750mm/2400mm, Weight: approx. 3000kg. Documentation available. An on site inspection is possible. Dusdsyq R D Hjpfx Adaep

Year of construction: 1977, condition: ready for operation (used), An old eccentric press Elmerding with defective foot switch is available. Press capacity 30°: 25t, stroke adjustment range: 12mm-80mm, ram adjustment: 60mm, stroke rate: 120rpm, table adjustment: 150mm, safety distance: 144mm, weight: approx. 1450kg. Only 2-hand operation is possible. Documentation available. An on-site inspection is possible. Dedpfx Adjypr Spjaoup

Condition: used, functionality: fully functional, Knuckle joint / coining presses CINCINNATI HME K-360 tons (3 units) K-600 tons (1 unit) Cincinnati HME K360 360 Tons capacity Djdpfx Aoypathjdaoup Stroke 2.125" Speed 90-200 SPM Main Motor 22 kW Maximum Coin Diameter 34 mm Maximum Coin Thickness 3.5 mm Cincinnati HME K600 600 Ton Capacity, 4.5'' Stroke, 25 Strokes per min, 17.5'' Shut Height (SDAU), 9/16'' Top Tool Adjustment

Year of construction: 2023, condition: used, machine/vehicle number: B1703I0727, Press force: 500 kN, stroke: max. 215 mm, overrun time: max. 117 ms, overrun distance: max. 15 mm, machine weight: 5,500 kg Djdoyn Nh Sopfx Adajup

Year of construction: 1991, condition: ready for operation (used), Press force: 250kN, Operating pressure: 280bar, Stroke: 300mm, Installation height: 500mm, Reach: 250mm, Oil filling: 280l, Ram speed: 105mm/s, Weight: approx. 2550kg. Documentation available. An on-site inspection is possible. Duodpfx Asynlubodajp

Condition: excellent (used), functionality: fully functional, pressing force: 1,000 t, stroke length: 170 mm, The press is designed for carrying out various cold pressing operations that require high specific pressures with short strokes: embossing, sizing, finishing, die forging and the like. In addition it can be used for carrying out cold extrusion of steel parts. Press is in good condition. Manufactured by Barnaul Capacity, ton 1000 Strokes per minute 32 Table size, mm 800 x 800 Slider stroke, mm 170 Max distance between table and slider, mm 470 Bolster plate thickness, mm 140 Lower knockout: -Stroke, mm 11; -force, ton 320 Upper knockout: -Stroke, mm 10; -force, ton 10 Motor capacity, kW 40 Press dimensions, mm 3060 x 1730 x 3830 Press weight, kg 26000 Dusdpfsynkr Sex Adasp

Condition: not inspected (used), functionality: unexamined, overall weight: 4,250 kg, total length: 1,500 mm, total height: 2,900 mm, table length: 750 mm, table width: 620 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Pressing force: 100 kg Table dimensions: 750 x 620 mm Capacity: 180 l MACHINE DETAILS Operating voltage: 380 V Connected load: 7.5 kW Dimensions & Weight Dimensions (L x W x H): 1,500 x 1,200 x 2,900 mm Weight: 4,250 kg Dsdpfx Aeym Rtajdaeup External reference: Lot 136 / Lotec

Condition: excellent (used), Year of construction: 1987, The CDR press is designed for pressing and compressing railway wheelsets with guide bushings in a cold state. The device allows both assembly and disassembly of wheelsets for locomotives and railway cars, with simultaneous recording of the pressing force progression depending on the pressing length. After the pressing is completed, a report is printed for archiving the process. The press is a horizontal, three-column construction that prevents the press from skewing under eccentric force application and ensures precise perpendicularity between the pressed wheel and the axle journal. The pressing cylinder rests on a support traverse that moves on wheels along two beams. The pressing force, depending on the type of wheelset, is captured by the support traverse at predetermined locked positions. Pressing force kN 5 000 Stroke mm 700 Duodpfx Aoympr Isdaop Max. working speed mm/s–1 0,5÷3 Distance between columns mm 2 450 Max. wheelset length mm 2 500 Max. wheelset weight kg 1 200 Machine dimesnions mm 6 350 x 4 350 mm 4 290

Year of construction: 2024, condition: ready for operation (used), Max. pressing force: 400kN, max. retraction force: 30kN, piston stroke: 400mm, pressing speed low pressure/high pressure: 9mm/s, return speed: 13mm/s, max. installation height: 600mm, throat depth: 300mm, front support: 150mm, table height: 900mm, frame width: 250mm, drive power: 4kW, length: 1200mm, width: 695mm, height: 2300mm, weight: approx. 1t. The press is still in its original packaging and unused, with accessories. An on-site inspection is possible, not under power. Dedoylbr Rspfx Adaeup

Year of construction: 1988, condition: used, functionality: unexamined, machine/vehicle number: Maschinen-Nr. 9371, Moros press, 30 kW connection, bale size 40x40 cm. Rexroth hydraulics, hydraulic cylinder – new, seals – new, hydraulic oil/filter – new, electrics – new. Dodpfxjyknzps Adaeup

Year of construction: 1988, condition: ready for operation (used), Press force: 400kN, max. stroke: 300mm, max. tool dimensions X/Y: 280mm/550mm, min. tool dimensions X/Y: 90mm/90mm, max. total tool weight: 750kg, max. upper tool weight: 500kg, operating pressure: 260bar, weight: approx. 4500kg. An on-site inspection is possible. Dodsyi E Dxjpfx Adaoup

Year of construction: 2001, condition: ready for operation (used), number of axes: 10, Hydraulic press manufactured in 2001. This AMADA's SCHIAVI HFB 220-40 features a robust 4000 x 220 Tons capacity and includes advanced safety features such as side and rear guards, and photocells that comply with regulations. With a use and maintenance manual provided, this refurbished machine is CE compliant. Consider the opportunity to buy this AMADA's SCHIAVI HFB 220-40 hydraulic press. Contact us for further details. • Capacity: 220 tons Dusdoyitfdspfx Adasp • Axes: 10-axis (Y1, Y2, X1, X2, R1, R2, Z1, Z2, Z3, Z4) • Crowning: Automatic, Schiavi-patented • CNC: Task 84 • Safety: Side and rear guards; photocells; CE compliant • Condition: Refurbished • Documentation: Use and maintenance manual Technical Specification Bending Length 4000 mm

Year of construction: 1990, condition: ready for operation (used), Press force: 100t, throat depth: 320mm, table dimensions X/Y: 850mm/610mm, ram dimensions X/Y: 600mm/355mm, stroke range: 10mm-130mm, ram adjustment: 80mm, stroke rate: 56rpm, installation height: 300mm, machine dimensions X/Y/Z: approx. 1900mm/1900mm/3150mm, weight: approx. 9000kg. On-site inspection is possible. Djdsyiflmepfx Adaoup

Condition: like new (used), Type: PX 30530 Serial number: 12932 Year of manufacture: 2021 Dodpeyhdrrofx Adasup Bending length: 3050 mm Pressing force: 320 t Maximum pressure: 280 bar Motor power: 18.5 kW Oil tank capacity: 400 l Weight: 14,700 kg

Year of construction: 2012, condition: excellent (used), Technical details: Pressing force: 50 tonnes Table size: 800 x 1630 mm Duedpfx Adjygxtheajp Stroke: 350 mm Bending capacity (flat steel): 150 x 25 mm Bending speed: 2 – 10 mm/sec. Motor power: 5.5 kW CE marking Control panel with digital display Dimensions (L x W x H): approx. 900 x 1850 x 1050 mm Weight: approx. 2000 kg Accessories: Support table 2000 mm The seller accepts no liability for typing or data transmission errors. The machine's appearance, technology and wear and tear are consistent with its age; used machines are sold without any warranty.

Condition: ready for operation (used), Two mechanical large-format double-column eccentric punching presses Rhodes (UK) are available. Press force: 350t, table dimensions X/Y: 1750mm/920mm, ram dimensions X/Y: 1550mm/615mm, ram stroke: 101mm, ram adjustment: 100mm, stroke rate: 50 strokes/min, max. installation height: 483mm, side opening X/Y: 630mm/380mm, table height: 933mm, weight: approx. 43000kg. Documentation available. On-site inspection is possible. Dodpfx Aeyfv I Tedaeup

Year of construction: 1990, condition: used, Hbret press with 120-ton pressing force, currently disconnected and drained, ready for transport Djdpfx Aoyctnxedajup

Year of construction: 2018, condition: ready for operation (used), travel distance X-axis: 500 mm, overall weight: 4,050 kg, total height: 2,100 mm, product length (max.): 2,950 mm, This Inanlar CNC HAP 70 25/21 was manufactured in 2018. It features a bending length of 2,550 mm and a bending force of 70 tons. The machine includes a finger protection system and supports for safety and efficiency. With a main motor power of 5.5 kW and a stroke of 185 mm, it's ideal for precise bending operations. Contact us for more information about this machine. • Bending force: 70 tons Duedpfxoya D U Rj Adajp • Bending capacity (steel 400 N/mm² over full length): 3 mm • Distance between uprights: 2,100 mmSpeeds • Down speed: 90 mm/s • Working speed (bending): 8 mm/s • Return speed: 70 mm/sAxes • X-axis speed: 250 mm/sSafety & equipment • Finger protection system (spaced pads): 2 units • Table supports: 2 unitsHydraulics & power • Oil tank capacity: 180 liters • Main motor power: 5.5 kWTooling / geometry • Ram stroke: 185 mm • Distance between prism table and ram: 380 mm • Throat depth: 310 mm • Table height: 800 mm • Table width: 110 mm Technical Specification Bending Length 2550 mm

Condition: good (used), Year of construction: 2010, Press force: max. 1200 kN; Stroke: max. 52 mm; Dimensions (W x L x H): 4610 x 3910 x 2665 mm; Total weight (net): approx. 7000 kg Dodpfx Ajyaqgajdajup

Year of construction: 2007, condition: used, max. wheel diameter 500 mm dayligth 200 mm Dsdpfx Adeyan N Seasup Maximum workpiece outer diameter: 500 mm Maximum workpiece height: 200 mm Minimum workpiece inner diameter: 60 mm Hold-down force of inner pressure ring: 120 kN Hold-down force of outer pressure ring: 240 kN Spreading force of the spreading mandrel: 60 kN Extrusion force: 800 kN Pump capacity for hardening oil flow, basic device: 750 l/min Hardening oil tank capacity of the hardening machine: approx. 2000 liters Hydraulic oil tank capacity: 400 liters Operating pressure, pneumatics: 6 bar