Used Heat treatment equipment for sale (5)

Condition: excellent (used), Year of construction: 2014, operating hours: 2,731 h, Functionality: fully functional, machine/vehicle number: 60501401, type of input current: three-phase, total width: 2,000 mm, total length: 4,100 mm, total height: 2,800 mm, protection type (IP code): IP54, power: 30 kW (40.79 HP), Mechanical vapour recompression vacuum evaporator with forced circulation for water treatment. Nominal production of distillate: 15000 l/24h Iaelhetuklhoccqkou Comissioned in 2014 and hardly used, fully functional.

Condition: new, Functionality: fully functional, total width: 2,000 mm, total length: 8,000 mm, total height: 4,000 mm, For sale MVR evaporator for liquids, evaporation capacity 1T/h. Iaelhcswrm Sqjcqkju The machine is brand new and has never been used. - Evaporation/distillation based wastewater treatment. Purified process water, in the amount of 90%, is recycled back into the technological production process, while the wet sludge (10%) is disposed of according to the applicable Laws and Regulations on Waste. - Mechanical vapor recovery (MVR) - an energy-efficient process that reduces energy consumption and emissions. - Secondary vapor generated during evaporation is compressed and reused in the system. - Ideal for industries: food processing, wastewater treatment, chemical and pharmaceutical industries. Technical data: • Evaporation capacity: 1 ton/hour • Electrical connection: 380 V, 10 kV, 50 Hz • Dimensions (L x W x H): 10,000 x 2,200 x 5,000 mm • Condition: brand new, unused FREE WITH PURCHASE TERMINDUS industrial (fast) steam generator - 1500kg/h (picture 2.) Industrial fast steam generator of the Termindus brand, manufactured in 2013. The device is in good condition, ready to operate, used in an industrial plant.

Condition: new, Year of construction: 2018, Unused and installed De Lema type DLST/L dry heat steriliser / depyrogenation unit with Hosokawa Micron dispensing isolator. De Lema unit designed at 250 deg.c. for the depyrogenation of dry aluminium canisters with cycle time of approximately 7 hours. Tray capacity between 15 & 35 canisters per tray depending on size. The Hosokawa unit designed for filling canisters with powder including closure and bagging of canisters. Dispensing time is approximately 1.33kgs/min depending on product, number of operators, distribution of canister size and filling volume. Total makespan between 22.9 minutes to 29 minutes depending on product and canister size. Iajlhsuafg Soccqksu The system was designed to handle the following size canisters: - 2.5 litre with neck diameter 116mm, body diameter 175mm, height (w/o closure) 144mm - 6.25 litre with neck diameter 116mm, body diameter 175mm, height (w/o closure) 309mm - 12.5 litre with neck diameter 116mm, body diameter 175mm, height (w/o closure) 383mm - 32 litre with neck diameter 116mm, body diameter 300mm, height (w/o closure) 539mm System installed and commissioned but has never been operated on any products. Further technical specifications, additional information and site inspections are available upon request.

Condition: excellent (used), Year of construction: 2011, Bosch HTST (High Temperature Short Time) Pilot Pasteurizer (2011) Continuous-flow plant for thermal pasteurization of liquids, ideal for R&D and small productions. This system can be used in the food and beverage sector (dairy, plant-based drinks, juices, sauces, beer, kombucha, etc), biotechnology, life science, and chemical manufacturing. Process capability • Product mass flow: 30 - 600 kg/h • Pasteurisation temperature range: 70 - 135 °C • Holding time (two tubes included): 10 s (tube 1) or 15 s (tube 2) / can be modified or reduced by using a shorter holding tube (not included) • Max. product outlet temperature after cooling: 25 °C Highlights • Fully automated recipe sequence with alarm and interlock management • Automated CIP, rinse and sterilisation-in-place (steam); blow-out function for drain & drying • All product-contact parts 1.4404 (AISI 316L) Ioljwm Nyyshccqkjau • Less than five production cycles since installation – practically as-new • This unit comes from a GMP site and has been exceptionally well maintained • Complete original Bosch Pharmatec documentation (German) • Supplied with two stainless-steel holding tubes for 10 s and 15 s residence time • Dimensions LxWxH: 2 × 1 × 1.96 m Main assemblies • Feed pump (sanitary, frequency-controlled) • Plate heat-exchanger H110 (heating) • Plate heat-exchanger H120 (cooling) • 2 × holding tube modules (10 s & 15 s) • Sanitary piping, hygienic valves, clamp connections, air regulator • Field instrumentation (PT, TT, FC, QT, conductive sensors) • Electrical control cabinet with PLC/HMI, pneumatic manifold Utility interfaces • Product, purified water, compressed air, CIP solution • Steam, cooling water, waste drain Condition & scope of delivery Machine is de-installed, stored dry, and can be inspected in Liestal (CH). Shipment includes everything pictured, including two holding tubes, control cabinet and the full paper documentation set. HTST vs. UHT The HTST technology heats products to 72–135 °C for ~ 10–30 seconds to ensure pasteurisation while preserving quality, freshness and flavor. UHT uses temperatures of 135 °C or higher for just 2–5 seconds to achieve commercial sterility, enabling long shelf life without refrigeration. This system is primarily an HTST unit but can also be configured to replicate entry-level UHT conditions. The product’s heating duration (residence time at temperature) is determined by the length of the holding tube and the pumping speed. By fitting a shorter holding tube (not included) and/or increasing the flow rate, the residence time can be reduced to approach the short durations typical of UHT processing. We ship worldwide. If you are interested or have any questions, please feel free to get in touch!

Condition: used, Year of construction: 2011, Technical details: Ijlhju Nw E Ujccqksau temperature min.: 1 ° temperature max.: 199 ° electrics - voltage/frequency: 380 / 50 V/Hz heating capacity: 1,8 (1800 Watt) kW protection class: IP 54 total power requirement: 16,2 kW weight of the machine ca.: 0,93 t dimensions L x W x H: 2,85 x 2,0 x 1,4 m Pre-polymerization tunnel - Heat treatment tunnel Application: drying for washing and painting lines - pass through Sold as is and described! other features: -recommended temperature according to manufacturer max. 80°C; safety setting 90°C; heating 230V -with chain conveyor/feed line made of Teflon -chain width 200mm -max. workpiece width 150mm passage W: 150 x H: 110mm, running height 600mm; operation motor SEW Eurodrive (gear motor) power 0,18kW loading W x H: 500 x 800mm unloading door W x H: 600 x 1200mm access door W x H: 800 x 980mm with safety locking system room height 1400mm *