Schuster Betriebsverwertung GmbH

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: 230655, control type: NC control, actuation type: hydraulic, roller (top) diameter: 320 mm, side roll diameter: 240 mm, sheet thickness (max.): 25 mm, overall weight: 10,500 kg, total length: 4,350 mm, total width: 1,800 mm, total height: 1,950 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, Key Technical SpecificationsWorking Length: 2050 mm Upper Roll Diameter: 320 mm Lower/Side Roll Diameter: 240 mm Bending/Rolling Capacity: Designed to handle steel plates up to 25 mm (rolling) and pre-bend up to 20 mm. Working Speed: 1.5 to 5 meters per minute. Djdpfx Ajzzn A Tsptjwb Main Features 4-Roll Design: Allows full circle and varying radius rolling with precise edge pre-bending in a single pass. Linear Guide System: Directs hydraulic piston power straight to the material for higher bending accuracy. Application Suitability: Ideal for medium to heavy metal fabrication, cylindrical ferrules, and stainless steel processing. Optional: NC-control, Hydraulic Overhead Crane (Lift) 2,5m

Condition: excellent (used), Year of construction: 1988, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 370 mm, roller (top) diameter: 370 mm, side roll diameter: 280 mm, sheet thickness (max.): 20 mm, overall weight: 13,500 kg, total length: 6,900 mm, total width: 2,100 mm, total height: 2,100 mm, New ( 2026) Digital read out position side rolls Hydraulic drop end Minimum bending diameter 420 mm Full hydraulic machine Roll quality C60 900N/mm2 Djdpfx Apszxxgwotewb Rolling width: 3100mm Rolling thickness 3x toproll Ø:15mm Rolling thickness 5x toproll Ø:20mm Rolling thickness prebending: 12mm Top Roll Ø: 370mm Bottom Roll Ø: 370mm Side roll Ø: 280mm Number of rolls: 4 Rolling speed: 0 - 4 Adjustiment lower roll: 0 - 700mm/min. Adjustment side rolls: 0 - 200mm/min. Number of driven rolls: 2 Power: 15kW Length: 6900mm Width: 2100mm Height: 2100mm Weight: 13500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2002, Max. bending length 3000 mm Max. prebending 65 mm Max. rolling capacity 77 mm Top & bottom rolls dia. 700 mm Side rolls dia. 570 mm 4-roll Fully hydraulic machine Hydraulic drop end Motor power 163 Kw CNC-control (upgraded in 2121) Equipped with: 1 hydr. top support (9000 mm diameter) installed in 2014 NOTE !!! Djdpfxjzxc Dys Aptewb The hydraulic side table shown on photos - is NOT included !!!

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 10056 196, number of rollers: 3, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, overall weight: 34,000 kg, Haeusler hydraulic roller, type RMA 2500/30. Dedszutixspfx Aptowb Machine in good working condition. Capacity: 30 mm steel x 2500 mm.

Condition: excellent (used), Year of construction: 2007, Technical data: Working length: 2550 mm Max. bending capacity for small diameters: 12.0 mm Bending capacity from diameter 900 mm: 18 mm Bending allowance: 10 / 12.0 mm Roller diameter: 310 mm Dwodpfx Aoztckisptob Hydraulic folding bearing Drive power: 11 kW Lateral bending support Sheet metal holding device Digital display Dimensions (length x width x height): approx. 4200 x 1500 x 1650 mm Weight: approx. 10 tons Condition: Overall in very good condition, used only sparingly. The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2000, control type: NC control, controller manufacturer: Davi Smart, number of rollers: 4, roller (bottom) diameter: 340 mm, roller (top) diameter: 370 mm, side roll diameter: 320 mm, roller length: 3,100 mm, sheet thickness (max.): 25 mm, overall weight: 18,500 kg, total length: 5,900 mm, total width: 2,200 mm, total height: 2,300 mm, power: 30 kW (40.79 HP), Equipment: cone bending device, 4 roll plate bender Davi Promau - MCB-3037 MACH-ID 9751 Make: Davi Promau Type: MCB-3037 Control: Davi Smart Year: 2000 Conical bending attachment Extended roll end for section bending jobs Digital read out position side rolls Central lubrication CE-Declaration Rolling width: 3100mm Rolling thickness 3x toproll Ø:20mm Dwjdpozi Ra Rsfx Aptsb Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending: 22mm Top Roll Ø: 370mm Bottom Roll Ø: 340mm Side roll Ø: 320mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 30kW Length: 5900mm Width: 2200mm Height: 2300mm Weight: 18500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1980, machine/vehicle number: 4350, roller (bottom) diameter: 280 mm, roller (top) diameter: 300 mm, sheet thickness (max.): 20 mm, overall weight: 14,200 kg, working length: 2,000 mm, TECHNICAL DETAILS Bending length: 2,000 mm Max. sheet thickness: 20 mm Bending capacity: 15/11 mm Bottom roller diameter: 280 mm Top roller diameter: 300 mm MACHINE DETAILS Drive power, main drive: 16.2 kW Drive power, top roller drive: 4.8 kW Drive power, bottom roller drive: 3.7 kW Dodezi D Saepfx Aptswb Weight: 14,200 kg

Condition: used, functionality: unexamined, Year of construction: 1963, machine/vehicle number: 971W01002, control type: manual, degree of automation: manual, actuation type: electric, number of rollers: 3, roller (top) diameter: 400 mm, side roll diameter: 400 mm, roller length: 3,000 mm, sheet thickness (max.): 15 mm, Used HAEUSLER KRMA 3000 x 15 rolling machine for sale. Manufacturer: CHR. HAEUSLER AG, Switzerland. Working width 3000 mm, nominal thickness 15 mm, 380 V. Serial number 971W01002. The nameplate indicates the year 1963, as well as a revision/CE marking from 2003. The machine is designed for rolling and bending sheet steel. It is sold in its current condition, and on-site inspection is recommended. Dwjdpfx Ajzil Hfjptob The machine is also equipped for bending profiles.

Condition: good (used), Year of construction: 2000, machine/vehicle number: 21977-1964, Offer 26165 Technical Data - Two driven rollers, each hydraulically adjustable - For edging and conical rolling - Operation via a separate control panel, with digital actual value display - and manual operation Dodpfx Apozf Hkdetewb - Max. working width 1300 mm - Max. sheet thickness at 400 N/mm² without edging - at bending diameter 370 mm, inside 30 mm - with edging at bending diameter 370 mm, inside 25 mm - without edging at bending diameter 380 mm, inside and - width of 370 mm 45 mm - Upper roller diameter each 300 mm - Side roller diameter each 310 mm - Working speed 4.5 m/min - Drive 400 V / 30 kW - Space requirement W 5800 x H 1900 x D 2200 mm - Weight 8500 kg

Condition: good (used), functionality: fully functional, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 350 mm, side roll diameter: 325 mm, roller diameter: 350 mm, roller length: 3,050 mm, working width: 3,000 mm, working height: 1,500 mm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, overall weight: 13,000 kg, total length: 5,400 mm, total width: 1,950 mm, total height: 2,350 mm, power: 25 kW (33.99 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, PLATE BENDING ROLL PINCH PYRAMID ON LINEAR GUIDEWAYS Bending capacity -Plate width 2500 mm -Rolling plate thickness 25 mm -Prebend thickness 20 mm -Rolls useful length 2550 mm -top roll D 350 mm -side rolls D 325 mm Dwodpfx Apozdk Tyjteb Hardened high strength surface of the 3 rolls Roll rotation driven hydraulic motor with gear unit Conical bending hydraulic tilt angle set of siderolls Re-rolling system welded shells rounding. Opening hydraulic front drop-end top roll tiltup Electric motors 25 Hp on hydraulic unit Vac 380/50 Digital position readouts of the bending rolls Manuals with the machine Dimension mm5400x1950 x H 2350 mm -weight 13 ton

Condition: ready for operation (used), functionality: fully functional, We are selling this 4-roller sheet metal bending machine. Sheet width: 3150 mm Djdpfezcp Axjx Aptowb Sheet thickness: 40 mm Machine weight: 93,000 kg Upper roller diameter: 600 mm Minimum bending radius: 480 mm Bending speed: 6.8 m/min

Condition: good (used), Year of construction: 1998, control type: NC control, number of rollers: 4, roller (bottom) diameter: 540 mm, roller (top) diameter: 560 mm, side roll diameter: 420 mm, roller diameter: 440 mm, roller length: 3,100 mm, overall weight: 45,000 kg, total length: 8,700 mm, total width: 2,900 mm, total height: 3,075 mm, power: 81 kW (110.13 HP), 4 roll plate bender HAEUSLER - VRM-hy Dwjdpfjzbqqusx Aptjb MACH-ID 9638 Make: HAEUSLER Type: VRM-hy Year: 1998 Smallest bending diameter 640 mm Pressing force against upper roll 5800 kN Conical bending attachment Central lubrication Equipped for change rolls Rolling width: 3100mm Rolling thickness 3x toproll Ø:50mm Rolling thickness 5x toproll Ø:60mm Rolling thickness prebending: 40mm Top Roll Ø: 560+440mm Bottom Roll Ø: 540mm Side roll Ø: 420mm Number of rolls: 4 Rolling speed: 0-6 Adjustiment lower roll: 0 - 200mm/min. Adjustment side rolls: 0 - 500mm/min. Number of driven rolls: 2 Power: 81kW Length: 8700mm Width: 2900mm Height: 3075mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2001, Technical data: Working width: 2050 mm Max. bending capacity for normal steel St40: 4.0 mm Max. edge bending for normal steel St40: 2.0 mm CNC control: MG Diameter of top roller: 140 mm Diameter of side bottom rollers: 105 mm Diameter of central bottom roller: 130 mm Conical bending device Working height: 800 mm Mobile control panel Hydraulic folding bearings CE marking Motor power: 3 kW Dodeza D U Dopfx Aptjwb Dimensions (length x width x height): approx. 3400 x 1200 x 1200 mm Weight: approx. 2.5 tons Condition: Very good condition, very little use The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, machine/vehicle number: 11/10575, working width: 3,000 mm, sheet thickness (max.): 16 mm, TECHNICAL DETAILS Sheet metal width: 3,000 mm Sheet metal thickness: 16 mm Control system: conventional Dsdpfxezapqws Aptowb MACHINE DETAILS Rated current: 63 A Voltage: 380 V

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: EVO, controller model: EVO 4 AXIS 15", number of rollers: 4, roller (top) diameter: 300 mm, roller diameter: 300 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 1,250 mm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 25 mm, overall weight: 17,000 kg, total length: 5,500 mm, total width: 2,000 mm, total height: 2,100 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4roll hydraulic plate bending machine rated capacity 3000x35 mm MODEL MG M3035 , used year 2024 machine as new with warranty included Planetary dual pre-pinch Performance Capacity: Plate width 3000 mm plate thickness rolling 30 mm pre-bend 25 mm minimum rolling diameter ID 350 mm max open width plate feed 3100 mm special top roll reduced size 300 mm to achieve rolling ID 350 mm Power electric motor 18.5kw on hydraulic unit Vac 400/50 -480/60 Installed configuration Hardened rolls high surface strength Conical plate rolling, cone bending Electric console remoted on wheels with joysticks and readout Dwjdpoy Tbf Iefx Apteb CNC programmable 4 axis controller touch screen 15” Setup virtual infinite rolling programs with teach-in mode and cad/cam operator interface --- Hydraulic motorized driven the central rolls Pre-pinch load adjustable for pre-bend Drop-end top roll front open unloading closed shells Re-rolling system for welded shells calibration. Safety and emergency stop Manuals and schematics machine dimension 5500x2000x2100 mm -weight 17ton --- Additional accessories available with the machine See layout drawing in enclosed nr.1 central support hydraulic 2.2 ton capacity to support large shell dia up to 4,5 meters id nr.1 side support hydraulic left side 2.2 ton double arm nr. 1 side support hydraulic right side 2.2ton double arm

Condition: good (used), functionality: fully functional, Year of construction: 1980, 2500 mm x 340 Ømm top roller Rolling capacity: 2500 x 23 mm (5 x top roller diameter) Max. sheet thickness: 2500 x 15 mm Equipped with top crane and side support Dwsdpfxjyz Acwe Aptjb

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 3roll 3500x140 mm prepinch, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: MG, controller model: MG, number of rollers: 3, roller (bottom) diameter: 880 mm, roller (top) diameter: 950 mm, side roll diameter: 880 mm, roller length: 3,550 mm, working width: 3,500 mm, working height: 3,950 mm, sheet thickness (max.): 140 mm, sheet thickness steel (max.): 175 mm, overall weight: 2,00,000 kg, total length: 8,800 mm, total width: 5,100 mm, total height: 5,775 mm, power: 200 kW (271.92 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Hydraulic Plate Bending machine planetary pinch pyramid with prebend. model MG35140V 3 roll capacity 3500x140 mm Dwjdpsyzim Ajfx Aptob The machine was overhauled in 2024, Capacity : Plate width mm. 3500 Plate thickness mm. 140 Capacity chart in enclosed Tech data: -3 rolls driven hydraulic motorized with axial gear unit on each roll independent -Synchronized hydraulic rotation of the 3 rolls with variable speed. -Planetary design with pre-pinch fully hydraulic -Conical plate bending with hardened contrast pad -Digital position readouts of the bending rolls -Rolls installed on bearings double crown heavy duty -Overload safety hydraulic operation protection of the 3 rolls -High pressure hydraulic power pack with multi-pumps oil feed -Centralized control panel electric on wheels with joysticks and digital readouts -Emergency stop with safety system around the machine working area Rolls surface length mm. 3550 Top roll mm. 950 Side rolls mm. 880 Electric power on hydraulic unit Hp 100 + Hp 100 Voltage 380 Vac / 50 Hz Configuration & accessories installed with the machine -Hardened surface of the 3 rolls -Conical plate bending attachment , rolls tilt with contrast roller type. -Centralized operator panel with directional joysticks electric. -Digital position readout of the bending rolls. -Emergency and safety installations, certified CE -User manuals and instruction books in English -Dimension see layout drw in enclosed

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, machine/vehicle number: 10659, roller (bottom) diameter: 300 mm, roller (top) diameter: 350 mm, working width: 3,000 mm, sheet thickness (max.): 25 mm, empty load weight: 24,000 kg, TECHNICAL DETAILS Number of rollers: 4 pcs Max. sheet thickness: 25 mm Max. working width: 3,000 mm Upper roller diameter: 350 mm Lower roller diameter: 300 mm MACHINE DETAILS Dedpfsyua Ezex Aptjwb Control: Conventional Dimensions & Weight Dimensions (L x W x H): 6,300 x 2,000 x 1,800 mm Unladen weight: 24,000 kg Transport packages: 1 pc.

Condition: new, bending length: 2100sheet thickness: 45prebending: 35Upper Roll Diameter: 430Side Roll: 390motor: 30messurements (LxWxH): 5200 x 2200 x 2500weight approx.: 19000 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine Dwjdpeytyy Nofx Aptob - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 98600 € 1863.54 € 3100 mm 16 mm 16 mm 13 mm 16 mm 14 mm 12 mm 300 mm 300 mm 240 mm 50 mm 1140 mm 18.5 kW 5310 mm 1660 mm 1140 mm 11100 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity Dwjdpfsynm Hfjx Aptsb

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 103100 € 1948.59 € 2550 mm 25 mm 25 mm 20 mm 20 mm 16 mm 350 mm 350 mm 260 mm 1,5-5 m/min 22 kW 5500 mm 2000 mm 1900 mm 13000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls Dwedeynm Euopfx Aptob hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 97400 € 1840.86 € 2050 mm 30 mm 30 mm 25 mm 25 mm 20 mm 350 mm 350 mm 260 mm 1,5-5 m/min 22 kW 5000 mm Dedpfx Apoynm Enjtjwb 2000 mm 1900 mm 11000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 53700 € 1014.93 € 2050 mm 16 mm 16 mm 13 mm Dwsdoynm Ehepfx Aptob 13 mm 10 mm 260 mm 260 mm 200 mm 1,5 / 6 m/min 7.5 kW 4300 mm 1600 mm 1550 mm 6100 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 111500 € 2107.35 € 3100 mm 20 mm 20 mm 16 mm 16 mm 12 mm 350 mm 350 mm 260 mm 1,5-5 m/min 22 kW Dsdpjynm Ebofx Aptswb 6000 mm 2200 mm 1900 mm 15000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 73200 € 1383.48 € 2050 mm 20 mm 20 mm 16 mm 16 mm 12 mm Dwodpfx Apsynmyljtjb 280 mm 280 mm 220 mm 1,5 / 5 m/min 16.5 kW 4350 mm 1700 mm 1850 mm 8550 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT (PRICES ON REQUEST): infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended