Wolff Steuerungstechnik GmbH

Condition: good (used), Double Mitre Saw DG79 - 2 x 2 kW - 380 Volt - Year of manufacture: 1988 - 2100 / 3800 rpm - Saw blade Ø 330 mm - Cutting range at 90°: 195 x 90 mm; at 45°: 135 x 90 mm - Minimum cutting length 500 mm, maximum approx. 3300 mm Redsygm Akjpfx Aazen - Compressed air 6-8 bar / 250 l/min - Weight: approx. 500 kg - Pneumatic clamping system

Year of construction: 2001, condition: used, Saw blade diameter vertical: 600 mm Saw blade diameter (horizontal): 500 mm Ejecting width: processing of profiles up to 300 mm at 90°, mitre tips up to 30° Profile height max. 280 mm Engagement depth: at 90° horizontal up to 185 mm / at 90° vertical up to 230 mm Rsdpfx Aaeygkn Djzen Material stop: swiveling 30° - 90° - 45° Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Year of construction: 2001, condition: used, Max. saw blade diameter: 350 mm Rjdpfx Aajygin Nezen Pneumatic material clamps Table rotateable left and right Manual feed

Year of construction: 2019, operating hours: 4,225 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: G122782, Fully functional EMMEGI saw ready for collection, well-maintained with low operating hours, like new. Rjdpfx Aajygh Axjzon

Condition: new, HSK 63 angle head NEW Redpfjygc Trox Aazsn for Emmegi machine

Condition: not inspected (used), Year of construction: 1996, functionality: unexamined, FOM double-head saw for aluminum, plastic, and wood - one head electic drive - saw diameter 400mm - total length 4800mm - maximum saw approximately 4000mm Rodpfx Ajycv Nxoazjn The machine worked until the end. After unplugging, it was tested and working. It may require minor repairs (air leaks). You can inspect it on-site at our company in Poland. We can send a video of the machine in operation. We can assist with transport.

Year of construction: 2001, condition: like new (used), functionality: fully functional, machine/vehicle number: 694-6367, For sale is a SCHÜCO KSM 235 clipping machine, year 2001, article no. 296757, S/N 694-6367, 230 V, approx. 150 kg, roller conveyor approx. 200 cm. The machine can be inspected at our company premises and, if desired, also tested. Redpfx Aasycqq Djzsn

Condition: good (used), saw blade diameter: 360 mm, Sliding saw / Mitre saw / Chop saw / Radial saw Redpfxeyckbio Aazen Wegoma zs 135 Mitre saw type ZS135 -Motor power: 2.2 kW -Saw blade: Ø 360 mm, swiveling

Year of construction: 2014, condition: like new (used), functionality: fully functional, Double mitre saw with 5 NC axes suitable for aluminium and light metal alloys, featuring automatic movable head adjustment and electronic control of all angles from 22°30' (internal) to 45° (external), with a fine-resolution of 280 positions per degree. The 600 mm saw blades offer two different feed modes. The standard feed optimises the cutting chart vertically for profiles taller than 450 mm. The radial mode utilises an extended stroke beyond the vertical reference plate, producing a large cutting chart horizontally for profiles up to 240 mm wide. Accessories: - Pro software package: Overlength / Shortcut / Cross-cut / Wedge cut - Pneumatic profile supports - Data import from external software (LogiKal / Schücal / MAP / TXT / Excel, etc.) - Additional clamps - Additional material support - Short part clamp for automatic and semi-automatic cutting - Additional clamp on roller conveyor - Motorised feed - Safety hood with adjustable opening width for improved noise and dust protection Redpfxeycht Nj Aazsn The saw has extremely low operating hours and cutting cycles! It is in excellent condition. Only 13,000 cuts and 900 operating hours! Twin-head cutting-off machine with 5 NC axes for aluminium and lightweight alloys, with automatic mobile head movement and electronic management of all angles from 22°30’ (internal) to 45° (external) with a resolution of 280 positions per degree. The 600 mm saw blades have two distinct feed modes. Standard feed optimises the cutting chart in the vertical direction for cutting profiles over 450 mm in height. The radial mode utilises a large stroke beyond the vertical reference plate, generating a large cutting diagram horizontally for profiles up to 240 mm wide.

Year of construction: 2014, condition: used, functionality: fully functional, Mobile chip extractor MG4, sound-insulated and equipped with automatic start. Features an antistatic filter, suitable for extracting aluminum, PVC, and steel chips. Automatic filter cleaning and easy chip container emptying thanks to castors. The VP version is fitted with a control unit featuring a potential-free contact for external activation by the connected machine. The front extraction system comprises two cast aluminium suction ports, each with a 100 mm diameter. These allow for multiple connections via plastic hoses with metal reinforcement to dust extraction devices mounted on cutting machines, sawing centers, machining centers, and PVC machinery. Rodjycgtbjpfx Aazen Accessories include adapters reducing to 70 mm, a Y-connector, and approximately 14 meters of extraction hose. (Perfectly set up for use with an Emmegi double mitre saw)

Year of construction: 2020, condition: as good as new (ex-display), functionality: fully functional, ZAX12372 Single-head saw machine with pneumatic tilting of the heads • Head tilt up to 22.5° right / left (Automatic positioning at fixed angles 22.5° - 45° - 90°) • Head tilt at intermediate degrees, with manual positioning (mechanical stop) • Full guarding • Three-phase motor 400V 50Hz 4kW (inverter-driven) • Saw blade rotation speed 1900 rpm • Provision for chip and fume extraction • Simultaneous start of the vacuum with the start of the saw blade • Saw cut lubrication by spray mist • Widia saw blade Ø 700 mm • 2 pneumatic horizontal clamps Rjdpfoya H Dzsx Aazen • 2 pneumatic vertical clamps • Set of service tools -> optional FOM length stop

Year of construction: 2002, condition: used, Max. cutting length: 3000 mm Max. saw blade diameter: 380 mm Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spray device Pneumatic material clamps Rjdpeyabzuofx Aazjn Miter cuts possible on both sides 2-Hand-Bedienung

Condition: excellent (used), functionality: fully functional, Pantograph with 2 controlled axes, ideal for machining aluminum, PVC, and steel profiles up to 2 mm, with the option to process stainless steel (optional). The work cycle is managed through intuitive software that guides the operator with simple instructions on the touchscreen display. The USB connection allows for easy linking to a PC. The four-sided rotating worktable ensures very high precision by using shorter tools, thus avoiding through machining and the resulting issues of vibration and noise. It is equipped with a quick tool change system with ISO 30 taper. A retractable, pneumatically operated guard protects the operator during machining. Rsdpfxjx U Dg Dj Aazsn

Year of construction: 2022, condition: like new (used), functionality: fully functional, For sale: Emmegi Five 300CS glazing and inspection press, ideal for precise glazing and final inspection of window and frame elements. The machine features a self-centering clamping system and robust, scratch-resistant contact surfaces. Reliable technology, user-friendly operation, and compact design. Technical specifications: - Contact surfaces coated with hard, scratch-resistant PVC - Adjustable working surface height: 875–925 mm - Working surface tilt: 0° (horizontal) to 85° - Adjustable clamping force (max.): 660 N - Clamping device opening: 425–2,425 mm - Clamping jaw height (max.): 65 mm - Clamping device with 2 beams, each with 5 adjustable jaws - Beam height: H = 2,060 mm - Self-centering clamping system with retractable clamping beams - Pneumatic tilting of the roller conveyor in horizontal position - Infeed/outfeed roller conveyor, floor height adjustable: 305–355 mm - Machine length: 3,000 mm Redpfx Ajx U Daqeazjn - Air consumption: 150 Nl/cycle - Maximum load capacity: 200 kg - Machine weight: 330 kg

Condition: used, Year of construction: 2015, 2-head cutting machine blades 450 mm Rodpfxjx Syxwe Aazon usefull lengyt 5000 mm

Condition: excellent (used), Year of construction: 2010, Electronic 2-head cutting machine diameter blades 550 mm cutting angles -15° +45° Redsx Syufjpfx Aazsn usefull lenght 6000 mm

Year of construction: 2004, condition: good (used), Machine frame DG 104 M made of steel sheet (cutting length 6,000 mm) Profiled lifting bars Movable or automatically retractable workpiece supports Material clamping units Cross stop and head stop Exhaust connections, extraction system Timer system Roller conveyors Saw blades High-performance cutting fluid Rodpfsx Rinrsx Aazon

Year of construction: 2008, condition: used, functionality: unexamined, Auction: Plant Closure Roschmann, Gersthofen (Augsburg) Place your bid now – Sale to the highest bidder. Lot 2910009: Rsdpsx N Niasfx Aazen Complete industrial-grade double miter saw system for precise cutting of aluminium or PVC profiles, featuring integrated dust extraction. This robust and reliable setup is ideally suited for use in window, façade, or profile fabrication, where accurate angle cuts and clean operation are essential. Technical Specifications: Double Miter Saw - Manufacturer: Elumatec - Model: DG 244/10 - Power supply: 3~PEN / 400 V / 50 Hz - Motor output: 3.5 kW - Compressed air requirement: 7 bar - Speed: 2,800 rpm - Year of manufacture: 2008 Dust Extraction Unit - Manufacturer: Schuko (H. Schulte-Sudhoff GmbH & Co. KG) - Model: DG 244 - Airflow rate: 1,870 m³/h - Motor output: 2.2 kW - Suction pressure: 1,050 Pa - Power supply: 230/400 V, 50 Hz

Condition: ready for operation (used), functionality: fully functional, For sale: Complete production line for aluminium frames & insect screens Ideal for window manufacturers, craft businesses & producers Available for sale is a fully coordinated set of machinery and workshop equipment for the production of: - Aluminium frames for timber-aluminium windows - Renovation aluminium frames - Fixed insect screen frames The equipment is suitable both for existing companies looking to increase their manufacturing depth as well as for start-ups or newcomers wanting to take over a ready-to-use production line immediately. Special features: - Preferred sale as a complete package - Partial sale of individual machines possible - Field-proven, functionally matched machines - Independent in-house production possible - Significant cost savings compared to purchasing new equipment Instruction, training & knowledge transfer: Upon request, I offer buyers personal instruction and job training. The goal is to pass on the specialist knowledge built up over decades. The training can include: - Introduction to the complete production process - Optimal machine settings - Cost-effective production - Avoidance of common mistakes Redpfxex Nbnho Aazsn - Assistance with commissioning Benefits for the buyer: - Immediate start of production - Reduced dependence on suppliers - Expansion of offering portfolio - High value creation - Know-how transfer included Reason for sale: The sale is due to age and a change of profession. Further information: - List of machines and details available on request - Scope of training negotiable - Collection by arrangement If interested, please get in touch. Open to all options and arrangements. Double mitre saw Elumatec DG 79: Comes with blades for aluminium cutting. Year of construction 1996. Cutting length 4.5m. Digital length display. Overhauled in 2024 for 6,500. New feed units, belts and bearings. Fully operational. Set up and ready for demonstration. Machine available due to business closure at the end of March. Sale with invoice. VAT can be shown separately. Cut-off and mitre saw Graule ZS 170N: With 420 mm saw blades for aluminium cutting. Fully equipped. Year of construction 2004. Saw height 170 mm. Left roller track 6 m with manual stop. Right roller track 5.2 m with digitally adjustable stop from the saw stand, adjustable and swivelling! Pneumatic material clamping and mist spray unit. The machine can be tilted on both sides via handwheel. Compound cuts no problem! Digital electronic angle display for both axes. Laser guide on saw blade. Cross fence for acute angle cuts. With machine stand. Please note: The blue tool drawer cabinet and wall-mounted extraction system are not included in the offer. Set up and ready for demonstration. Machine available due to business closure at the end of March. Sale with invoice. VAT can be shown separately. Notching mill Graule AKF1: With 8 mm high-performance cutter for aluminium. I have used this machine to notch aluminium profiles. It also works equally well on wood or plastic profiles. With machine stand made of aluminium profile system. Manual workpiece clamping. Set up and ready for demonstration. Machine available due to business closure at the end of March.

Condition: used, Year of construction: 2013, CNC profile processing center by Stegherr, model GLS-2, year of manufacture approx. 2013, Beckhoff control system type CP3919, serial no. 143/0613-1. Free sale. Please send us your offer. Rodpfjx Natcex Aazsn

Year of construction: 1996, condition: used, Max. saw blade diameter: 280 mm Pneumatic material feed via two-hand operation minimum quantity spraying Bevel cuts possible on both sides with detent points Roller conveyor and length stops on request Rsdpfxex Ivqze Aazsn

Condition: excellent (used), functionality: fully functional, Usable cutting length: 4000 mm Blade diameter: 500 mm Rodjx Ifimepfx Aazon Electronic tilting of the heads Internal/external tilting from 22°30′ to 135° Feeler probe Chip conveyor belt

Condition: new, Fully automatic sawing and punching or drilling in a single machine! Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Compatible with Ø 500 or 550 mm saw blades, reversible mechanism for cut lengths up to a maximum of 4000 mm. Saw-Punching Automation System Profilma 502 ST-V • For aluminium and plastic profiles • For cutting to length and punching based on the Profilma 502 model • Fully automatic operation Redpfx Ajx Hafteazon and Saw-Drilling Automation System Profilma 502 BG • For aluminium and plastic profiles • Cutting to length, drilling, and thread cutting of up to 4 profiles simultaneously • Fully automatic operation

Condition: new, Year of construction: 2025, functionality: fully functional, saw blade diameter: 520 mm, CNC-controlled double-head mitre circular saw with electronic saw head tilting A high-performance circular saw designed for precise and efficient cutting of profiles made from aluminium, non-ferrous metals, and various plastics. The machine can be used for individual cuts—sawing the profile simultaneously with two saw heads—or in automatic mode, where the double-head saw operates as a single-head saw automation system. Rjdpox Eycpjfx Aazjn Electronic mitre adjustment of the saw heads. Mitre angles are infinitely programmable between 20° and 135°. Saw blade drive power: 2 x 2.2 kW Saw blade diameter: Ø 520 mm Maximum cut length with both saw heads operating simultaneously: 4,000 mm or 5,000 mm Maximum / minimum cut length in automatic mode: unlimited (the profile is pushed and pulled) Roller conveyor travel length: 2,300 mm Maximum space requirement: approx. 7.2/8.2 m (saw unit fully to the right) x 1.25 m x H 1.6 m Weight: approx. 1,500 kg / 1,700 kg - CNC control with a touchscreen and color graphics on a mobile operator’s panel - Import and export of CSV / LTE files (for loading cutting lists from external design software) - Graphical profile display Optionally equipped with a label printer.

Year of construction: 1997, condition: used, Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. notch width: 300 mm Max. latch height: 185 mm Redpfx Aaox Ecg Uezsn Max. latch depth: 185 mm Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication