Bole Ltd.

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our designated sales area in Germany (Rhine-Main region and North Rhine-Westphalia). Such enquiries will not be answered. Equipment and technical specifications: In intermediate lacquer sanding (Cd-L) configuration Robust, space-saving single wide-belt sander for demanding calibration and fine sanding tasks • Constant working height due to upper part adjustment • Working width: 1350 mm • Over-belt sanding with combination unit • Entire sanding unit inclinable up to 10° • Serrated rubber contact roller of proven hardness • Infinitely adjustable contact roller height according to a grain scale • Pneumatic lifting/lowering of the contact roller according to aggregate selection • Sanding pad with quick-release sliding insert • Parallel spring-loaded, ground steel pressure roller at the infeed • Rubberized pressure roller at the outfeed • Belt drive motor: 11 kW (1100 mm), 15 kW (1350 mm), 18.5 kW (1600 mm), 400 V/50 Hz, soft start for low current draw at startup • Electrically controlled, precisely adjustable height positioning with digital readout • Belt tensioning, control, and oscillation: pneumatic, compressed air usage approx. 2 l/min • Optimum safety thanks to automatic immediate stop with disc brake in case of belt break, belt drift, pressure drop, or opening of belt access door • Workpiece feed: 1.1 or 1.5 kW with fabric-reinforced rubber conveyor belt • Vacuum device for worktable with small parts section, fan integrated in machine frame • Complete electrical system with contactor control; automatic star-delta start of main motor, motor protection, and ammeter for chip removal monitoring • Pass-through height: 200 mm • Sanding belt dimensions: 1350 x 2000 mm • Automatic thickness adjustment across the full working width • Workpiece overthickness protection with immediate feed stop and automatic lifting of machine upper structure • Stepless regulation of material removal Dkjdpfx Akozi Hwfezep • Electronic feed regulation on the control panel, stepless from 3 – 15 m/min • PLC control/programming with color touchscreen and TEACH-IN memory (one-touch based on sanding result, no input required) • Pneumatic conveyor belt tracking control • Workpiece support tables at infeed and outfeed • ENORMATIC: Fully automated rapid setup and feed activation (very useful for large workpieces) • eco* energy-saving mode • Error diagnostics • Order and operating hour counters - Electronic segmented sanding pad, segment width 22 mm (swiveling special version) - Steplessly adjustable sanding belt speed (with program memory) - Ejector nozzles for sanding belt cleaning, demand-controlled, with additional extraction nozzle - Additional sanding shoe insert for lacquer sanding Including swiveling air knife, complete Availability: short notice Location: Flörsheim

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: C03/136, The machine is available immediately. Dkedpfozi Avwsx Akzep

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Working width: 1,350 mm Constant workpiece inlet height: 900 mm Dsdpezix Szsfx Akzskp 1 cross-sanding unit 1 combined sanding unit 1 unit with sanding shoe 1 brush unit with Scotch-Brite brush 1 rotating finishing brush on the machine's outlet side Belt feed with continuously adjustable speed Vacuum workpiece clamping system Automatic control of extraction shutters (shutters not included) Protected support for the sanding shoe installed on the machine Abrasive belt drive Safety stop device Control: Colour touch-screen Dimensions: 2520 × 2050 × 2180 mm Weight: 4700 kg Only 3228 operating hours Available mid-September 2026

Condition: like new (used), Year of construction: 2019, functionality: fully functional, SCM sd60 135 Dkjdpfx Akeziqm Rezsp

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Industrial cross-sanding machine for high-quality surface finishing of wood, veneer, and painted workpieces. The combination of a cross-sanding and longitudinal-sanding unit enables efficient and precise processing in a continuous flow. Processing units: 1 × Cross-sanding unit with pressure pad belt 1 × Longitudinal-sanding unit 1 × Brushing unit Technical data Technical data: Sanding width: 1,300 mm Maximum workpiece thickness: 140 mm Working height: 780–920 mm Feed rate: 4.5–22 m/min Cross-sanding belt: 4,900 × 150 mm Pressure pad belt: 4,650 × 140 mm Longitudinal-sanding belt: 2,620 × 1,350 mm Dkedpfx Aezinviokzop Brush roller: Ø 150 mm Workpiece vacuum clamping system: 7.5 kW Total connected load: 44 kW Machine weight: approx. 3,850 kg

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: MODEL: Excel 2NRKRT 2-BELT MACHINE 1ST BELT ROLLER, 2ND BELT COMBINATION UNIT ROLLER/SHOE FOR SOLID WOOD, VENEER AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm: 1350 - SANDING BELT LENGTH mm: 1370 x 2150 - MAX. WORKPIECE THICKNESS mm: 160 - STEEL CALIBRATION ROLLER mm: 180 - Rubber-coated SANDING ROLLER mm: 180 - SANDING SHOE WIDTH mm: 50 Dkjdpfx Akszh Rufjzjp - MAIN BELT MOTOR POWER kW: 14.7 - BELT SPEED m/s: 18/16 - FEED MOTOR POWER hp: 0.75 - Infinitely variable feed belt gearbox, speed adjustable m/min: 4/20 - HEIGHT ADJUSTMENT MOTOR hp: 0.33 - Mechanical BELT OSCILLATION "ECO GEAR PATENT SYSTEM" - 1 pc. DRUM BRAKE for belt braking - Pivoting ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS with rubber coating - EMERGENCY STOP BAR at infeed Availability: short notice Location: Flörsheim

Condition: used, functionality: fully functional, Stemac COMET-1 combination wide belt sanding machine with sanding belts, working width max. 1300mm, workpiece thickness max. 160mm, workpiece thickness min. 3mm, as per images and inspection, self-dismantling Color: green Condition: used Payment method: prepayment by bank transfer Location of goods: carpentry workshop/hall 2 Shipping: Self-collection only - No shipping is offered for this item! Dkodpfezh Naajx Akzep

Condition: used, Year of construction: 2020, functionality: fully functional, Equipment: CE marking, Hello, I am selling a Felder Findustry 1353 wide belt sanding machine. Year of manufacture: 2020. Commissioned: March 2021. Specifications: 1. Spiral roller planing unit (22 kW) 2. Calibrating roller unit (18 kW) 3. Combination unit with backing pad (15 kW) Steel pressure pads between the units Dust extraction on units 2 and 3 Dkodpfjzg Etyox Akzjp Motor overload protection Price: €40,000 We are selling the entire machinery park. I will send the detailed machine specifications by email.

Condition: used, Bütfering wide belt press, model 1350, with roller combination, manufactured in 1992, 3500 operating hours. Dkjdpezgvxmsfx Akzjp

Condition: used, Technical specifications: Working width: 1150 mm 1 Combined unit with a shoe Shaft diameter: 140 mm Height of material being processed: 160 mm Feed belt speed: Variable Diameter of the extraction nozzle: 160 mm Electric lifting Analog display Dksdpfx Aszguy Nokzjp Safety switch Main motor power: 12.5 kW Voltage: 380 V Overall dimensions: Length: 2300 mm Width: 2000 mm Height: 2250 mm

Condition: excellent (used), Year of construction: 2019, operating hours: 614 h, functionality: fully functional, machine/vehicle number: LB828023A, grinding width: 1,350 mm, power: 46 kW (62.54 HP), COSTA S6 CTT 1350 wide belt sanding machine Professional wide belt sanding machine COSTA S6 CTT 1350, equipped with 3 working units in configuration C25 + T + T. The machine is designed for high-quality calibration and sanding of wood-based panels and similar materials. Main technical data: * Working width: 1350 mm * Sanding belt length: 2620 mm * Working thickness: 3–160 mm * Feed speed: 4–20 m/min * 1st unit: C25 roller unit, 18.5 kW * 2nd unit: sanding pad unit, 11 kW * 3rd unit: superfinishing unit, 11 kW * External cleaning brush: 1.1 kW Dkedpfezgbxfjx Akzop * Approx. installed motor power: 46 kW * Power supply: 400 V / 50 Hz * Pneumatic pressure: 6 bar * HMI Vision control panel * CE compliant Machine suitable for professional woodworking and panel processing applications.

Condition: used, Year of construction: 2016, functionality: fully functional, feed length X-axis: 1,350 mm, total width: 2,260 mm, total height: 2,350 mm, total length: 4,195 mm, working width: 1,350 mm, workpiece weight (max.): 150 kg, overall weight: 10,000 kg, working height: 880 mm, power: 86 kW (116.93 HP), compressed air connection: 7 bar, air demand: 186 m³/h, Machine is working. Planned dismantling DEC-2026 Dedpfszgaa Uox Akzekp

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 128 9 7000 3043, feed length X-axis: 1,350 mm, total width: 1,975 mm, total height: 2,350 mm, total length: 2,260 mm, overall weight: 4,500 kg, working height: 880 mm, power: 93 kW (126.44 HP), workpiece height (max.): 150 mm, air demand: 151 m³/h, Good condition. Dodpozf U T Hefx Akzjkp Planned dismantle DEC-2026

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, working width: 1,300 mm, overall weight: 4,700 kg, height adjustment type: electric, Wide-belt sanding machine Manufacturer: Viet Type: S3 223 TM Year of manufacture: 2006 (CE) Well-maintained calibrating and fine-sanding machine from a small carpentry/manufacturing workshop, suitable for sanding solid wood, veneer, and lacquered surfaces. Working width: 1300 mm Constant table height, motorized height adjustment of the machine’s upper part (the machine is also suitable for inline operation). Automatic workpiece detection, thickness measurement, and infeed protection. 1x cross-sanding unit, sanding belt dimensions: 150 x 5520 mm 1x combination unit with calibrating roller and electronic segmented sanding shoe, segment pitch: 25 mm 1x cleaning brush for removing dust from workpieces 1x ionizer to prevent static charging Feed rate infinitely adjustable Vacuum transport for small, short, or slippery workpieces (e.g., lacquered parts) Dedszd Aylepfx Akzokp Operating voltage: 400 V, 50 Hz, 3 phases Dimensions: approx. 2500 x 2850 x 2280 mm (L x W x H) Weight: approx. 4700 kg

Condition: like new (used), Year of construction: 2021, operating hours: 30 h, functionality: fully functional, machine/vehicle number: AE00002612, grinding width: 1,350 mm, overall weight: 6,250 kg, grinding height: 170 mm, working height: 170 mm, table height: 900 mm, workpiece height (max.): 170 mm, The machine has only been in use for a few hours and is practically brand new. It is in perfect working order. See below for the full specifications: DMC system T5C 1350 PF170-4M Lifting unit for a fixed work table, 900 mm from the ground * Working thickness: 3 to 170 mm BL 16 Infeed panel with reading bar for 'epics' sectioned pads, pitch 16 mm, or with PWM3 POSITION 01 TIE-5000 Working unit for an extractable internal cross pad PE 16T 'EPICS' sectioned electronic sanding pad, pitch 16 mm Working pressure control of the sectioned pad via the Pro-Sand control system Motor driven by an inverter, power up to 15 kW POSITION 02 DO 19 Oscillating unit fitted with 19 rotating 125 mm disc brushes 1.1 kW main motor driven by an inverter Independent motor for controlling the oscillating movement Electronic auto-set for the unit Sliding movement with motor driven by an inverter POSITION 03 BF 300 Working unit for a brush roller, diameter 300 mm 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 04 BF 300 Working unit for a brush roller, diameter 300 mm Dodpfx Akszcmcvozskp 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 05 SC-2620 Operating unit for a superfinishing pad Sanding belt rotation against the conveyor feed direction Electronic sanding belt swing control Disc brake ◦ Chevron belt dimensions: 1370 x 2186 mm ◦ Sanding belt dimensions: 1370 x 2620 mm PE 16/C 'EPICS' sectioned electronic sanding pad, pitch 16 mm 16 mm center-to-center distance of sectors Double-action pneumatic cylinders with adjustable push/counter-push Graphite cloth with quick extraction device Total management of its functionality by the "Pro-Sand" electronic control Working pressure management of sectioned pad via the Pro-Sand control system Timed oscillating clearing blowers 15 kW motor driven by an inverter OUTSIDE THE MACHINE SB/U 200 Outfeed working unit for abrasive cloth-coated rollers, diameter 200 mm Roller rotation against the conveyor feed direction / Manual adjustment of the roller working position / Abrasive cloth-coated roller, diameter 200 mm, 'Ultra Fine' type with silicon carbide fibers / 2.2 kW motor / Side oscillation of the brush roller OTHER DEVICES Perforated worktop and conveyor belt with a vacuum motor powered by an inverter up to 7.5 kW, integrated into the machine frame Front supporting worktop equipped with five idler rollers Rear supporting worktop equipped with five idler rollers 4 kW feed belt motor driven by an inverter Console with integrated PC "eye-M" and "Maestro Pro-Sand" electronic control with Tele Service system 1999 working programs / Virtual keyboard for fast settings of the machine / Production report / Interactive trouble-shooting program and self-diagnosis of the electronic cards / Display of electric and pneumatic diagrams / Display of the user manual, spare parts catalog, electric and pneumatic diagrams Vision panel door positioned on the service side Internal LED lighting for the machine

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: A50729/RC1, working width: 1,350 mm, Equipment: documentation/manual, SECOND-HAND WIDE BELT SANDER COSTA MOD. AK-CCCT 1350 - CE RULES - Working width 1350 mm - S/N A50729/RC1 Dsdpfszcl Taex Akzekp - Year 2005

Condition: like new (used), Year of construction: 2013, operating hours: 250 h, Wide-belt sanding machine Bütfering Type: SWT 315/C Optimat Year of manufacture: 2013 Working width: 1350 mm Feed rate: 2.5 – 13 m/min, adjustable via frequency converter 1 combination unit with steel contact roller, with three options: - infinitely variable, frequency-controlled cutting speed 2-18 m/s, - calibration sanding with profiled contact roller - veneer and lacquer sanding - one electro-pneumatic segmented pressure bar with 25 mm segmentation - protected storage area on the machine for storing additional sanding pads - adjustable sanding belt blowing device, 5-stage adjustable, application-optimized cleaning results with low compressed air consumption Technical data: Working width: 1350 mm Sanding belt width: 1350 mm – 1380 mm Belt change side: left Workpiece thickness: 3 – 160 mm Operating voltage: 400 V / 50 Hz Drive motors: Unit: 20 kW Total connected load: approx. 23 kW Extraction nozzle: 1 x Dm 180 mm (unit) Extraction volume: approx. 1,830 m³/h BL 1 (1350 MM) BELT LENGTH 2150 MM Sanding belt length: 2150 mm Dodszb Ikxspfx Akzjkp UPGRADE TO MPS 1 Design of the segmented pressure bar as an electromagnetic segmented pressure bar MPS with program-controlled, current-controlled adjustment of the sanding pressure of each individual sanding segment, with 2 buttons per actuator in a 25 mm grid VAKIX 1/2 (1350 MM) VACUUM INTEGRATED (T3) High-performance fan for connection to a prepared vacuum clamping device with a 3 kW fan, nozzle diameter: 160 mm Extraction volume: 940 m³/h FBM (1350 MM) FINISHING BRUSH Driven finishing brush on the outfeed side of the machine Nozzle diameter: 140 mm Extraction volume: 1100 m³/h ATA 2 (1350 MM) SUPPORT TABLE, FOLDABLE Support table approx. 900 mm long with an integrated roller at the outfeed (foldable) Machine weight: 2800 kg

Condition: excellent (used), Year of construction: 1995, 3-HEAD WIDE BELT CALIBRATING/SANDING machine with 3 upper wide abrasive belts and calibrating/sanding rollers for sanding MDF, plywood, chipboard, and wood panels. Main technical data: * Maximum working width mm 1180 * Maximum sanding height mm 160 * Minimum sanding height mm 3 * Height of working table: 900 * 1st unit: Rubberized sanding roller, 90 Shore – Motor HP 15, ROLLER DIAMETER: 250 MM * 2nd unit: Rubberized sanding roller, 60 Shore – Motor HP 15 (together with the 3rd roller), ROLLER DIAMETER: 250 MM Dksdezbk U Hepfx Akzep * 3rd unit: Rubberized sanding roller, 30 Shore – (together with the 2nd roller), ROLLER DIAMETER: 250 MM * Brushing unit HP 2.2 * Variable feed speed from 5 to 25 m/min. * Feed motor HP 7.5 * Size of abrasive belts: 2620 x 1180 mm. * Oscillating blowers for belt cleaning. * Vacuum pump for working table HP 7.5 * Lifting motor HP 0.33 * Weight 3000 kg. Approximately 20 new sanding belts – various grits Used machine in very good condition, tested in our workshop before delivery.

Condition: good (used), Year of construction: 1992, functionality: fully functional, working width: 1,300 mm, grinding width: 1,300 mm, overall weight: 5,355 kg, power: 68 kW (92.45 HP), workpiece height (max.): 120 mm, input voltage: 380 V, Wide belt sanding machine, model 1300, with steel rollers, rubber rollers, and shoes, 30/18.5/18.5 kW. Includes dust extraction nozzles above the machine. The feed table is in good condition but does not have a vacuum system. Dkjdpfx Akjzbalzszop

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, total width: 2,000 mm, total height: 2,020 mm, total length: 3,800 mm, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 3,400 kg, working height: 900 mm, height adjustment type: electric, input voltage: 400 V, warranty duration: 3 months, passage width: 1,350 mm, sheet thickness (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness brass (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness steel (max.): 100 mm, Equipment: 1 contact roller unit, Ø 210 mm, rubberized 40 Shore, grooved Drive: 15 kW/87 Hz/29 A (11/19 kW motor) with frequency control / ECO-Drive, constant speed, with electric roller adjustment (SKF) and positioning prepared for the use of Scotch-Brite strips 1 sanding brush station with 3 vertical rotating units equipped with 2 horizontal rotating brushes each Tool: grit 150, No. 068087 Drive: 2.6 kW per unit Speed of the rotating units: 30-150 rpm, frequency-controlled. Cutting speed of the brushes: 5-20 m/sec, frequency-controlled. With electric height adjustment and positioning Installed options: Automatic workpiece thickness adjustment (AWDM), automatic tool length correction, machine interior lighting (LED version), stepless feed rate 0.5-10 m/min, conveyor belt cleaning brush, conveyor belt control, conveyor table in vacuum version, vacuum control with vacuum sensor Dksdpjzav Dqefx Akzop Touch screen: 9" Siemens TP900 Comfort Year of manufacture: 2017 Weight [kg]: 3400 kg Previous owner: 1 Availability: Short-term, by arrangement Optionally, the matching piping and extraction system (total CE) are available for the machine.

Condition: used, Year of construction: 1985, overall weight: 3,000 kg, grinding height: 150 mm, extraction nozzle diameter: 250 mm, power of feed motor: 1,500 W, transport length: 2,650 mm, transport height: 2,400 mm, workpiece width (max.): 1,100 mm, transport width: 1,860 mm, I am offering for sale a two-belt wide belt sander from the Italian manufacturer VERBOOM. Model: BBV 1100/2 - Maximum width of the workpiece: 1100mm - Maximum height of the workpiece: 150mm - Maximum feed rate: 16m/min - 2 sanding units: 1) ribbed rubber roller for calibrating 2) metal roller + backing pad + metal roller - Power of the sanding units: 15kW - Feed motor: 1.5kW Dkodpsy Uh E Rofx Akzep - Lifting motor: 0.75kW - Pneumatic belt oscillation with photocells - Stepless feed rate adjustment - Working pressure: 6-8 bar - Diameter of the dust extraction nozzle: 250mm - Overall dimensions (L/W/H): 2650x1860x2400mm - Weight: 3000kg The wide belt sander is designed for precise calibrating and finishing sanding of solid wood components used in building joinery, veneered panels, plywood, and similar materials. The machine is equipped with two sanding units. Depending on the grit of the abrasive belts used, it can be used for rough, calibrating, or smoothing sanding.

Condition: good (used), Year of construction: 1998, working width: 1,350 mm, power: 209 kW (284.16 HP), Costa line with 3 lower and 3 upper rollers, one steel, one rubber, and one shoe roller. Dedpfsy Uahwox Akzskp The machine is in good condition and was removed from a clock manufacturing company that produces pine wood furniture.

Condition: excellent (used), CATALOG NUMBER 7910 TECHNICAL DATA - Max. working width: 1350mm - Max. working height: 150mm – From above: - Rubber pressure roller I unit (metal grooved roller for calibration) II unit (two smooth metal rollers + sequential sanding pad) - Rubber pressure roller - Cleaning brush – From below: - Infeed roller, metal - Feed belt - Outfeed roller, metal, slip type - Pneumatic belt oscillation with photocell control - Electric table lifting - 2 feed speeds: 2–14m/min - Main motor: 5.5/15 kW - Brake - Grinding height potentiometer - Feed motor: 0.75kW - Working pressure: 8 bar - Extraction nozzle diameter: 200mm, 120mm - Dimensions (L/W/H): 1860x2200x1980mm - Weight: 1995kg ADVANTAGES Dkjdpoy T Ip Tsfx Akzjp – German-made – Unpainted – DTR technical documentation included – Used sander, in very good condition Net price: 38,900 PLN Net price: 9,260 EUR based on 4.2 EUR rate (Prices may change with significant rate fluctuations)

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, COSTA wide belt grinder, two-roller model, 1350 mm roller width. The machine features a contact roller and a finishing polishing platen. Dsdpfx Aey Tx Exokzokp

Condition: ready for operation (used), Year of construction: 1996, Bütfering Classic 213 CE Wide Belt Sander Sanding width 1300 mm Tolerance-accurate calibration with the contact roller Sanding of solid wood Sanding of veneered workpieces with both articulated pressure beams Sanding belt width mm 1370 Sanding belt length mm 1900 Extraction capacity m³/h 3650/4500 min./max. mm 3-150 Compressed air connection bar 6-8 Total connected load kW 24 Air consumption l/min 20 Weight kg 3300 1. Unit Type C, combined contact roller sanding head with: - Steel contact roller, profiled. - Electronically controlled articulated sanding shoe, element width 50 mm - Motor power 11 kW 2. Unit Type E - Sanding shoe unit - Electronically controlled articulated pressure beam, element width 25 mm - Motor power 11 kW - Infinitely variable sanding belt speed from 2 to 18 m/s via frequency inverter - Forward and reverse operation - Belt blowing device Dodpjy Tu Suefx Akzskp Transport carpet with infinitely variable feed rate 2.5 - 13 m/min Control of the extraction slides Roller tables at the infeed and outfeed Workpiece cleaning: Rotating cleaning brush 0.75 kW Machine tested for functionality Price 12,500.- Year of manufacture 1996