PMH Handels GmbH

Condition: like new (used), Year of construction: 2019, I sell the edge banding machine Biesse JADE 240 Year 2019. Special offer: Machine almost NEW !! Configuration: Entry fence manual adjustable Premilling pneumatic adjustable Edge banding manual adjustable / 2 glue tanks for EVA glue Pressure zone manual adjustable End cutting saw pneumatic adjustable Tilting radius milling manual adjustable Corner rounding unit 2-motor manual adjustable Godpfxsxncrve Aabsbu Radius scrapers manual adjustable Glue scrapers pneumatic adjustable Polishing brushes Separation fluid spraying front Central lubrication system Top feeding rolls Height adjustment manual Material height 10-60 mm Edge thickness 0,4-8,0 mm Feeding speed 12 m/min. Only 9250 meters edgebanded. Machine almost NEW !! CE Mark. Including full documentation and CDs. Very good condition ! Available immediately !

Condition: excellent (used), Year of construction: 2015, I sell the fully equipped edge banding machine HOMAG KAL370 AMBITION 2474, year 2015: Configuration: Entry fence servomotorical adjustable Premilling manual adjustable Edge banding with preheating tank + AirTec System Material pressure zone servomotorical adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 4-motor pneumatic adjustable Radius R2 scrapers servomotorical adjustable / Second set for R1 included Glue scrapers servomotorical adjustable Polishing brushes Separation fluid spraying in the front Cleaning fluid spraying in the back Gbsdpsxnb Uvefx Aabeu Entry magazine for two bands in rolls automatic Working thickness adjustment servomotorical driven Material height 8-60mm Edge thickness 0,4-20mm Feeding speed up to 20m/min. Total length including feeding plate 8365mm Kilometerstatus 1.166.000 Meters edgebanded. Including full documentation and CE. Very good condition, fully working!

Condition: excellent (used), Year of construction: 2015, I sell the fully equipped edge banding machine HOMAG KAL370 AMBITION 2280, year 2015: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding with preheating tank Gbedpfoxnbx Iox Aabou Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 4-motor manual adjustable Radius R2 scrapers pneumatic adjustable / Second set for R1 included Glue scrapers manual adjustable Polishing brushes Separation fluid spraying in the front Cleaning fluid spraying in the back Working thickness adjustment manual driven Material height 8-60mm Edge thickness 0,4-20mm Feeding speed up to 20m/min. Total length including feeding plate 9365mm Kilometerstatus 2.926.000 Meters edgebanded. Including full documentation and CE. Very good condition, fully working!

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 0-261-06-1218, Machine available from end of November 2025 Very good condition (located in a training workshop) Panel thickness: 8 - 40 mm Minimum workpiece width: 60 mm Minimum workpiece length: 160 mm Edge thickness (fixed length): max 5 mm Edge thickness (coil): 0.4 - 3 mm Feed speed: 9 m/min Gjdpfxoxm Ug Nj Aabobu Total machine length: 3,075 m Weight: approx. 860 kg Gluing unit with bottom-mounted glue pot Glue roller with synchronous and counter rotation Electronic temperature control Automatic edge magazine with guillotine knife for up to 3 mm edge thickness Pressure zone with powered pressure roller and finishing roller Trimming unit with 2 motors Flush/radius milling with 2 motors Radius scraper (currently R=2 mm) Buffing unit with 2 motors Central upper pressure adjustment

Condition: used, Holz Her Triathlon 1488 FÜ + PU Heavy-duty design – edge thickness 0.4 – 25 mm SPS screen control Edge-Control Motorized, position-controlled height adjustment – belt bridge automatic feed fence Godpfxexm Spbe Aabsbu Pre-milling unit for jointing before the gluing section Fully automatic edge magazine for rolls and strips Glue application station for cartridge and PU bonding Glue application using nozzle technology automatic glue height adjustment Workpiece height 6–60 mm Pressure unit MOT End trimming unit for rolls and strips up to 15 mm edge thickness, with pneumatic adjustment for 0-15° mitering of the trimming saws Milling units – flush milling for rolls and strips from 0.4 – 20 mm edge thickness Contour milling unit for longitudinal and end processing of the edges, working height 45 mm Scraper unit for bevels and radii with 2 scraper holders, pneumatically engageable/disengageable Surface scraper unit Process-controlled buffing unit Automatic central lubrication for chain Electronically controlled spray unit at infeed and outfeed Machine is FULLY FUNCTIONAL The machine is in use and can be inspected and demonstrated at any time at the seller’s location Sale on behalf of a customer Ex site as inspected, without any warranty, NET €9,000.00

Condition: good (used), Code: 0222 Brand: FRAVOL Model: A 16-S - CE Standard Edge bander with trimmer for curved and straight panels, with glue tank for wood, pvc, abs, veneer edges, for furniture, kitchens, panels, carpentry, custom-made furniture - CE Standard Technical data: Min-max panel height mm 10-60 Edge thickness mm 0,4-3 Min edging radius mm 20 Motorized conveyor belt Variable feed speed mt/min 25/12 Tilting table Air pressure 6 bar Overall dimensions mm 1150 x 950 x 1300 h Weight kg 300 Upper and lower trimmer unit POLYMAC BIESSE SPEEDY 90 2 high-frequency motors adjustable in height Gbsdpfexmg N Nox Aabou Trimming height mm 12-60 Operating pressure bar 6 Suction mouth diameter mm 60 Overall dimensions mm 1000 x 950 x 1300 h Weight kg 110

Condition: refurbished (used), Year of construction: 2020, Condition: fully cleaned, refurbished, and overhauled – directly from Hebrock! 🧰 Technical Specifications & Highlights Model: Edge Bander Hebrock K36 Control: PLC with touchscreen Hotmelt glue application: for edge material up to 3 mm Workpiece thickness: up to 60 mm Jointing cutter: with DIA tool, cutting depth up to 3 mm Glue pot: coated, maintenance-free, with quick-change pre-fitting and glue draining system ⚙️ Equipment Packages & Stations HF milling station with pneumatic cutter adjustment Corner rounding unit (radius R = 2 mm) Radius scraper & flat scraper with pneumatic lift-off device Buffing station for perfect surfaces Whispercut jointer head Second milling station incl. pneumatic lift-off and quick-change system Exchangeable motor for corner rounding unit (radius R1) Multi-radius scraper (R1/R2) Multifunctional cutter (R2/R1/chamfer) 🪶 Additional Equipment Release agent and cleaning agent spraying system Protective spraying for edges / nesting function Gsdpfexmgzlsx Aabjbu Pneumatic 3-point adjustment LED lighting Airtronic up to 40 mm Hot air unit for optical zero-joint, also for short workpieces and corner rounding up to 60 mm

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, Single-sided edge banding machine Manufacturer: Brandt Model: KDF 660 Year of manufacture: 2005 Max. edge thickness: approx. 12 mm Max. workpiece thickness: 60 mm Max. coil material thickness: 3 mm Equipped with: - Pre-milling unit - Coil magazine - Glue application unit - End trimming unit - Top/bottom flush and radius milling - Top/bottom radius milling with front/rear edge copying - Radius scraper - Buffing station Gbjdoxl Ufvjpfx Aabou Feed speed max. approx. 16 m/min. Connection: 400 V, 50 Hz, 3 Ph Total connected load: approx. 15 kW

Condition: used, Lange B90 KFE Edge thickness: 0.4 - 3 / 5 mm Control panel: PLC touch panel Pre-milling unit for pre-milling before the gluing section Automatic edge magazine for roll materials Teflon-coated quick-change glue pot for hot melt adhesive granules Workpiece height: 8 - 50 mm Finely adjustable glue roller Guillotine up to 3 mm for pre-cutting roll materials Gbjdoxl Aw Tepfx Aabsu Pressure unit End trimming unit Multi-function milling unit for flush, radius and chamfer milling Corner copying unit for end edges up to 2 mm, switchable from the control panel Radius scraper blade Flat scraper blade Buffing unit Spraying device at infeed and outfeed Year of manufacture: 2018 The machine is FUNCTIONAL and in GOOD CONDITION Ex works NET €17,000.00

Condition: used, Holz Her UNO 1303 + PU Edge thickness 0.4 - 3 mm (6 mm) Control panel with selector switches for aggregate setting Fully automatic edge magazine for both rolls and strips Glue application station: Cartridge + PU gluing Workpiece height 6-55 mm Pneumatic pressure unit End trimming unit for rolls and strips up to 3 mm (6 mm) edge thickness With adjustable mitering of trimming saws from 0-10° Milling unit for flush milling, radius milling, and chamfer milling - 15° Scraper unit for chamfers and radii Godpoxlz Nzofx Aabobu Surface scraper unit - finishing Machine is TESTED and in TOP CONDITION from a very well-maintained craft shop Available ex-stock Lieboch at INVENTORY CLEARANCE FIXED NET PRICE €8,900.00

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, FELDER G330 Edge Bander Used edge bander, post-service inspection. - Machine in excellent technical condition. - Year of manufacture: 2013. - One-owner machine. - Recently serviced. EQUIPMENT: Electrical equipment: - Supply voltage: 3x 400 V - Power frequency: 50 Hz Workpiece dimensions: - Edge thickness: 0.4 – 3.0 mm - Workpiece thickness: 10 – 45 mm - Minimum workpiece width: 70 mm - Minimum workpiece length: 210 mm Units: - Edge feeding from coil via feed plate - Edge feeding for thicknesses 0.4–3 mm, manual feed for individual edging strips - Guillotine shear for trimming coil edges up to 3 mm thick - Gluing unit for hot-melt granulate adhesive, Teflon-coated glue pot - Spring-loaded pressure unit, 1 straight pressure roller and 1 pressing roller - Saw trimming unit: 9,000 rpm, 0.18 kW, HW saw blades Z=16, Ø 80 mm - Multifunctional milling unit: 12,000 rpm, 0.22 kW, for rounding, straight milling, and chamfering Gbedpfx Aoxly I Aeabju - Mechanically-activated corner scraper unit for R=2 mm - Mechanically-activated flat scraper unit Operation: - Control panel with LCD display and keypad - Quick, tool-free unit adjustment system Feed: - Workpiece feed with chain-type conveyor - Feed speed: 8 m/min - Extendable support General data: - Extraction port Ø 120 mm Overall dimensions: - Length: 2,000 mm - Width: 800 mm - Height: 1,500 mm - Weight: 360 kg Machine financing available via leasing or installments. Just visit our website: jbsmaszyny.pl We invite you to test the machine. Where to see our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE, Poland Nationwide machine transport! Phone: 663 495 647 (German) Phone: 664 335 475 (English) Phone: 530 632 386 (English)

Condition: ready for operation (used), Year of construction: 2024, Additional Equipment Application unit with Teflon coating for 1.5 kg EVA granulate Upper and lower polishing unit This FORMAT4 TEMPORA 60.06 glueBox x-motion edgebander was manufactured in 2024. It features a turntable magazine with a diameter of 750 mm for edging material ranging from 0.4-3 mm, a GlueBox application unit, and upper and lower polishing units. The machine includes advanced x-motion Plus control with a 15' SmartTouch screen and a multifunctional milling unit for precise plastic edge machining. Contact us for more information about this machine. Application Types Gbodoxlu Ukepfx Aabeu Edge Banding

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 3074, feed rate Y-axis: 10 m/min, total length: 4,984 mm, workpiece height (max.): 60 mm, total width: 1,425 mm, edge thickness (max.): 3 mm, total height: 1,618 mm, overall weight: 1,400 kg, type of input current: three-phase, height adjustment type: mechanical, input voltage: 400 V, extraction nozzle diameter: 140 mm, working height: 888 mm, input current: 32 A, input frequency: 50 Hz, extraction connection diameter: 140 mm, year of last overhaul: 2025, Due to the acquisition of a new machine, our reliable edge banding machine, purchased new in 2016, is now for sale. The machine has operated in a joinery workshop with 8 employees. It underwent a complete overhaul in January 2025. New radius scrapers, new milling tools, and new polishing wheels were installed. The pre-milling unit has been re-sharpened. The glue roller’s clutch has been replaced. The glue pot was completely refurbished and cleaned. The machine is suitable for both EVA granulate (e.g., Henkel Dorus KS351) and PUR adhesives. The degree of pre-milling, the edge material thickness, and the position of the lower and upper milling tools can be conveniently adjusted from outside the machine housing via manual handwheels. The control system allows custom edge banding programs to be saved. The machine automatically and pneumatically switches between 0.4 mm and 2.0 mm edge banding via program. Main specifications: - Power: 13.8 kW / 32 A / 400 V - Compressed air: 7 bar (100–150 l/min) - Touchscreen - Saved edge banding programs - Feed speed: 10 m/min - Edge material thickness, in rolls: 0.5–3.0 mm - Workpiece thickness: 8–60 mm (banding 60 mm thick materials possible) - Minimum workpiece width: 70 mm - Minimum workpiece length: 180 mm (for end trimming saw) / 220 mm (for corner rounding) - Processing units: - Diamond pre-milling (12,000 rpm) - Release agent tank/nozzle - Gluing station - End trimming saw - Milling unit R2 - Radius scraper R2 - Corner rounding unit - Cleaning agent tank/nozzle Gbedoxlr S Hspfx Aabsu - Flat scraper - Polishing wheel Price does not include VAT.

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 8 (12)* Panels thickness (min/max) mm 8 / 60 Numerical Control "StarTouch" + "Touch 7" Feeding speed m/min 12-18 Top pressure system with rubber belt (C.N.) Spraying unit (Anti-sticking liquid) AAR In-feed fence, adjustable by N.C. "EASY SIZE PLUS" Pre-milling Unit (vertical joint trimmers) 2 x Kw Lamps to heat the workpieces side Glueing Unit (P.U.R. Glue + Quick Melt system) "VC/800" - "VC/6" + "AirFusion AF15" Band Pressure zone (N.C. adjustment) Edge coils supporting unit - 1 Snipping (end-cutting) K/SEL Rough Trimming unit RS/K Fine Trimming unit RI / 800 (3 pos.) Multi Function Unit (Profile contour Trimming Unit) “4 EDGE” KIT Spraying Unit (for sliding liquid) Profile edge scraping unit RAS/1000 Glue scraper RCA / 2C Gjdpfx Ajxlqntsabsbu Milling grooving unit K-100 (1 x Kw 1,8) 90° Hot Air Heater (to reactivate the color of plastic tape) Panels Return System "SAG" Mod. SPINNER 47 / 63

Condition: used, Year of construction: 2009, Condition: Very good | *Machine description:* I am offering an industrial, single-sided edge banding machine from the renowned brand Homag, model Optimat KAL 210/6/A3/S2, year of manufacture 2009. The machine is fully operational, regularly serviced, and ready for immediate operation. *Technical parameters and equipment:* Year of manufacture: 2009 Model: KAL 210/6/A3/S2 Godpfx Aasxlpa Iobobu Type: Single-sided edge banding machine for furniture panels Edging thickness: up to 3 mm Panel thickness: adjustable from 10 mm *Units:* - End trimming - Milling - Corner rounding - Scraping - Buffing/Polishing Control: Electronic / automatic Technical condition: Very good – all functions operate correctly *Additional information:* - Machine in continuous operation - Regularly serviced - Ready for immediate use Inspection possible on site by prior arrangement. Location: Jasin / Wielkopolskie region

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Equipment and technical data: - Base machine with manual pressure bridge adjustment - Extendable workpiece support - Joint milling unit FG 201 with 2 milling heads - Edge feeding with single infeed, automatic transport of roll and strip material - Glue application system Glu Jet GJ 301, automatic glue height adjustment (sensing nozzle) - Pressing unit 1912-3 pneumatic - Pneumatic trimming unit 1918 (60 mm) - Extraction hoods for trimming unit - Multifunction milling unit FR 201 - Corner copying unit 1832 for up to 3 mm edge thickness - Scraper unit 1929 - Chip collection box - Flat scraper 1964 - Buffing unit 1940 - Complete spray device 1856 Gbodpfexllvrex Aabju Minimum workpiece length: 160 mm Workpiece thickness: 60 mm Edge thickness: 0.4-6 mm Feed rate: 10 m / min Overall length: 4630 mm Weight: 1250 kg The extraction bridge shown in the pictures is not included in the scope of delivery! Location: Hesse Availability: approx. December 2025

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Single-sided automatic edge banding machine with jointing unit, hot-melt adhesive application on straight workpieces (EVA/PUR glue pot with draining function optional), HF cross-cut saw unit, HF milling unit, corner copying unit, chain feed, double roller top pressure, extendable workpiece support rail, signal lamp for workpiece sequence and integrated line control for non-contact operation of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer rolls, as well as fixed lengths from 0.4–3.0 / 6.0 mm and workpiece heights from 8–60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. 3 free slots for finishing units. 10" color touch screen. Machine length: 4030 mm Workpiece thickness: 8–60 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm (min. approx. 200 mm with corner copying) Edge thickness: 0.4–3.0 mm Jointing unit cutting depth: 0–2.0 mm, stepless Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1050 kg Gsdpfx Aaexllvfobjbu Options: - Surcharge for radius scraping unit with air blast device + extraction - Surcharge for surface scraping unit + extraction - Surcharge for buffing unit - EVA/PUR glue pot with draining function - Surcharge for diamond tools height=65 mm for jointing unit - Riepe spray device (anti-adhesive) on jointing unit - Riepe spray device (cleaning spray before buffing unit) - Piping system with 90° bend + manual slide valve mounted on the machine, D=200 mm Availability: short notice Storage location: Hochheim

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Gbodpfx Aaexllvlsbsu Condition: Function tested Equipment and technical data: Glue pot with roller End trim shears Pressure zone End trimming saw Combination milling unit Surface scraper Chassis Edge material thickness: 0.5-3 mm Min. workpiece width: 90 mm Min. workpiece thickness: 10 mm Max. workpiece thickness: 45 mm Min. workpiece length: 50 mm Edge material overhang top and bottom: 2.5 mm Edge material overhang front and rear: 10 mm Location: Hesse Availability: End of November/beginning of December 2025

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Available now: a high-performance Holz-Her 1308XL Edge Bander, manufactured in 2020 and maintained to a very high standard. This compact, powerful machine is perfect for shops looking for professional edgebanding results with maximum efficiency and precision. Machine Details: Make/Model: Holz-Her 1308XL Year: 2020 Condition: Excellent – low hours, clean, and well-maintained Usage: Light commercial – ideal for joinery and cabinetry work Location: [Insert location] Availability: Immediate Key Features: Glu Jet system for PUR & EVA application Pre-milling unit for perfect edge prep Corner rounding for seamless finishes Touchscreen control panel with intuitive interface Fast heat-up time and energy-efficient operation Godpfoxlcfqsx Aabebu Compact footprint with high-end capabilities This model offers professional-grade edge quality, ideal for kitchens, furniture, and interior fit-out production. Holz-Her’s build quality and user-friendly controls make this a standout choice for serious workshops.

Condition: used, Year of construction: 2020, Used machine Year of manufacture: 2020 Equipment and technical data: Working dimensions Workpiece thickness: 8–60 mm Gbodpfexizuljx Aabsu Workpiece width: from 70 mm Edge height: up to 8 mm Edge thickness for roll material: up to 3 mm Feed Speed adjustable from 8 to 14 m/min, stepless regulation Gluing technology Glue system for granulate Glue pot located above the feed Interchangeable pot HOMAG QA 65 N Designed for EVA and PUR processing Quick-change function Units Jointing milling unit Pre-heating zone Pressure station, NC-controlled Front and end trimming with two motors Station for flush, radius, and bevel processing Corner rounding unit with two motors Scraper blades: profile and flat scraper Buffing unit Additional equipment and operator features Integrated spraying device Air cushion table for workpiece support PU pressure rollers Mechanical infeed barrier HOMAG powerTouch operator interface Right-hand machine version CE-compliant Dimensions: approx. 6,060 x 950 x 1,150 mm Weight: approx. 2,200 kg Availability: approx. December 2025 Location: North Rhine-Westphalia (NRW)

Condition: excellent (used), Year of construction: 2019, Edgebanding machine Manufacturer: Felder Model: Tempora 60.06, F600 Year of manufacture: 2019 Gsdpsxix Hxefx Aabebu Fully automatic operation from the control panel. Jointing unit: Yes End trimming unit: Yes Radius milling unit: Yes Radius scraper: Yes

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Edgebanding Machine HolzHer 1321, in very good and fully functional condition, regularly in operation, edging programs available, solid industrial machine. - Pre-milling unit/jointing with spare DIA cutter - Glue application unit upgraded approx. 2-3 years ago to continuous slot nozzle pressure track - Glue height and edge thickness fully controllable via display, supports cartridges or granulate, PU glue possible - Panel preheating - Top and bottom pre-milling with separate units - Motorized rounding milling up to 2 mm - End trimming unit, straight/angled - Radius scraper Gbsdpfjxiv Efox Aabou - Corner copying unit - Surface scraper - Buffing unit Machine is in ready-to-use condition. Still regularly in use until approx. CW42/43, can be tested on site.

Condition: as good as new (ex-display), Year of construction: 2023, 0,4 - 5 mm Workingpiece thickness from to 10 - 60 mm Gjdsxh Spkjpfx Aabebu Feed speed 12 m/min.

Condition: new, Year of construction: 2023, 0,4 - 5 mm Workingpiece thickness from to 10 - 60 mm Feed speed 12 m/min. Gbodpfxexh Spde Aabsu

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: C-261-04-2523, feed rate X-axis: 9,000 m/min, saw blade diameter: 100 mm, rotational speed (max.): 12,000 rpm, Submitting a bid obliges you to collect the item by the deadline of 14.10.2025! TECHNICAL DETAILS Edge Processing Edge type: Straight edges Edge material: Cut-to-size strips, lip cuts, coil material Feed speed: 9 m/min Edge material thickness: 0.4–3.0 mm Lip thickness: 0.4–3.0 mm Edge material height: 55 mm Coil diameter: 800 mm Rotation speed: 12,000 rpm Max. tool dimensions: 100 × 62 × 30 mm Extraction port Ø: 120 mm Workpiece Data Workpiece thickness: 8–50 mm Positioning accuracy: 0.1 mm Edge Banding Edge type: Straight edges Edge material: Coil material Max. tape cut: 3 × 30 mm or 0.8 × 45 mm Operating pressure: 6 bar Edge Glue Applicator Rotation speed: up to 1,800 rpm End Trimming Unit Motor speed: 12,000 rpm Saw blade diameter: 100 mm Cutting width: 2.6 mm Bore diameter: 32 mm Workpiece thickness: 45 mm Max. edge material height: 3 mm Edge material angle: 0–15° Godoxhgk Aepfx Aabjbu Edge material cross-section: 135 mm² Flush Trim Unit Rotation speed: 12,000 rpm Max. workpiece thickness: 8–50 mm Max. edge thickness: 3 mm Straight tools: 2 × WPL milling cutter Ø 50 × 12 × 16 mm, z = 4 Combination tools r = 3 mm: 2 × Trimmer Ø 56 × 50 × 12 × 16 mm, z = 4 MACHINE DETAILS Electrical Data Voltage: 400 V Frequency: 50 Hz Fuse protection: 16 A Control voltage: 24 V