Müsse Maschinen

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 300-2000 CX Injection Molding Machine Year of manufacture: 2010 Control system: MC5 Type: Hydraulic injection molding machine Equipment Fully hydraulic clamping unit MC5 control system with a color monitor Integrated operator panel 3 USB ports Plasticizing unit for thermoplastic materials 70 mm screw with abrasion protection Check valve Open nozzle Clamping Unit Clamping force: 3000 kN Dcsdpjzkaflsfx Anqei Platen dimensions: 995 × 1050 mm Tie bar spacing: 630 × 630 mm Opening stroke: 820 mm Maximum opening: 1150 mm Minimum mold height: 330 mm Ejector stroke: 200 mm Ejector force: 57.7 / 28.3 kN Injection Unit Screw diameter: 70 mm Injection pressure: 1877 bar Injection volume: 1078 cm³ Injection weight (PS): 981 g Injection rate: 385 cm³/s Injection rate with accumulator: 1155 cm³/s Screw speed: 220 / 310 rpm Plasticizing Unit For thermoplastic materials Abrasion protection Check valve Open nozzle Electro-hydraulic System Pump motor power: 55 kW Heater power: 29.2 kW Number of heating zones: 6 Number of dry cycles: 1350 cycles/h Oil tank capacity: 720 l Dimensions and Weight Dimensions: 6500 × 2200 × 2300 mm Weight: 14.5 t

Condition: excellent (used), Year of construction: 2004, Krauss Maffei KM 350–2700 C2+ injection molding machine Year of manufacture: 2004 Control system: MC4 Technical data Clamping unit * Clamping force: 3500 kN (350 tons) * Platen dimensions: 1060 × 1095 mm * Tie bar spacing: 710 × 710 mm * Opening stroke: 920 mm * Maximum opening: 1300 mm * Minimum mold height: 380 mm * Ejector stroke: 250 mm * Ejector force: 95 / 48 kN Injection unit * Screw diameter: 80 mm * Injection pressure: 1829 bar * Injection volume: 1433 cm³ * Injection shot weight (PS): 1304 g * Screw speed: 218 / 284 rpm * Maximum injection capacity: 1508 cm³/s Plasticizing system * Version for thermoplastic materials * Abrasion protection * Check valve * Open nozzle Drive system * Pump motor power: 75 kW * Heater power: 36 kW * Number of heating zones: 7 * Oil tank capacity: 720 l * Dry cycle time (Euromap): 1550 cycles/h Dimensions and weight * Dimensions (L × W × H): 6910 × 2040 × 2410 mm * Machine weight: 16.7 t Additional information Dedpszkadbsfx Anqoci * MC4 control system with color monitor * Machine prepared for modernization with the ESS system (energy saving of 30–60%)

Condition: excellent (used), Year of construction: 2016, KRAUSS MAFFEI KM 160-180 EX incl. LRX 100 (35.000 h) (S&P 3800) Manufacture year: 2016 Operating hours: 35,000 Stunden Screw: 25 mm Injection pressure: 2500 bar Dsdpfjzi Dakox Anqjci Stroke volume: 59 cm³ Clamping Force: 160 t Tie bar distance: 630 x 520 mm Mould installation height min.: 300 mm Plate distance max.: 1000 mm Dimensions: 5400 x 1600 x 2100 mm Eeight: 13200 kg Connected load: 28 kW All electric, 2 x Airvalve, 12 x Hoterunner, MC 6 in german, english, polnish and chinese, Interface Robot, Interface Temperatur device, Robot System LRX 100 (10 kg) X = 550mm / Y = 120mm / Z = 1500 mm / C = 90°, price when new approx. 205.000,- Euro Price: on request contact: Mr. Ralf Schulz

Condition: like new (used), Year of construction: 2022, operating hours: 12,000 h, We are offering this machine for sale due to a cancelled order. Screw: 40mm / HC version! Core pulls: 2x Blow-out: 2x Selective extraction unit Tool heating: 12x Includes Multilift Select 4x vacuum 4x pressure Djdpfx Anezi A Ugeqeci

Condition: excellent (used), Year of construction: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Manufacture year: 2015 Operating hours: 25,008 Stunden Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 950 mm Dimensions: 4800 x 1700 x 2400 mm Eeight: 6000 kg Connected load: 29 kW Dcsdpfx Anjzi A S Seqoi Robot interface EM67, Accumulator, Airvale etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2015, ARBURG A 1500 T 2000-400 Drehtisch (29.844 h) (S&P 3792) Manufacture year: 2015 Operating hours: 29,844 Stunden Screw: 40 mm Injection pressure: 2000 bar Stroke volume: 201 cm³ Clamping Force: 200 t Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4700 x 2100 x 2600 mm Eeight: 11500 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 2 x Corepuller, Airvalve, Interface Colorizing, Hotrunner, price when new approx. 250.000,- € etc... Price: on request Dedpfx Anozi A S Eeqsci contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Manufacture year: 2015 Operating hours: 25,109 Stunden Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Tie bar distance: 740 x 680 mm Dodezi A Sxopfx Anqoci Mould installation height min.: 300 mm Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2015, operating hours: 7,500 h, clamping force: 1,600 kN, screw diameter: 45 mm, clearance between the columns: 520 mm, displacement volume: 318 cm³, injection pressure: 2,336 bar, Injection molding machine KRAUSS MAFFEI KM 160-750 CX Stock No.: 503699 Manufacturer: KRAUSS MAFFEI Type: KM 160-750 CX Control: MC6 Year of manufacture: 2015 Operating hours: 7500 h Technical data, clamping unit Clamping force: 1600 kN Tie bar spacing h x v: 520 x 520 mm Platen size h x v: 820 x 845 mm Minimum mold height: 300 mm Maximum mold opening: 950 mm Opening stroke: 650 mm Ejector stroke: 150 mm Ejector force: 43 kN Mold weight: 1850 kg Technical data, injection unit Screw diameter: 45 mm Injection volume: 318 ccm Injection pressure: 2336 bar Screw length: 22 l/d Screw speed: 265 rpm Plasticizing rate: 29 g/s PS Free injection rate: 14 g/s PS Number of heating zones: 6 Dimensions & weight Machine dimensions L x W x H: 4.3m x 1.6m x 2m Total weight: 8200 KG Equipment Screen text: German Screen text: English Screen text: Polish CEE socket 16A CEE socket 32A Hydraulic core puller 2x Leveling elements Schuko socket 10A Dedjzi A Itepfx Anqoci Technical data, handling Machine type: Linear Manufacturer: Krauss Maffei Control: LRX 50 Year of manufacture: 2015 Handling weight: 5 kg X-axis: 620 mm Y-axis: 1200 mm Z-axis: 1500 mm Rotation axis C: 90° Screen text: German and English

Condition: excellent (used), Year of construction: 2019, operating hours: 9,000 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 35 mm, clearance between the columns: 420 mm, displacement volume: 154 cm³, injection pressure: 2,429 bar, Injection molding machine KRAUSS MAFFEI KM 80-380 CX Stock No.: 503701 Manufacturer: KRAUSS MAFFEI Type: KM 80-380 CX Control: MC6 Year of manufacture: 2019 Operating hours: 9000 h Technical data, clamping unit side Clamping force: 800 kN Tie bar spacing h x v: 420 x 420 mm Platen size h x v: 670 x 670 mm Minimum mold height: 250 mm Opening stroke: 750 mm Ejector stroke: 150 mm Ejector force: 23 kN Mold weight: 1000 kg Technical data, injection side Screw diameter: 35 mm Injection volume: 154 cc Injection pressure: 2429 bar Screw length: 23 l/d Screw speed: 295 min Free injection rate: 96 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions L x W x H: 4.1m x 1.5m x 2m Total weight: 3800KG Equipment Screen text in German Screen text in Polish CEE socket 16A Dcjdpfxjzizz Eo Anqji CEE socket 32A Hydraulic core pull 1x Air valve 1x Leveling elements Schuko socket 10A

Condition: excellent (used), Year of construction: 2021, operating hours: 6,000 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, Injection molding machines KRAUSS MAFFEI KM 80-380 CX Stock No.: 503703 Manufacturer: KRAUSS MAFFEI Type: KM 80-380 CX Control: MC6 Year of manufacture: 2021 Operating hours: 6000 h Technical data, clamping unit Clamping force: 800 kN Tie bar spacing h x v: 420 x 420 mm Dcodpfx Anjziy Udsqei Platen size h x v: 670 x 670 mm Minimum mold height: 250 mm Maximum mold thickness: 750 mm Opening stroke: 500 mm Ejector stroke: 150 mm Ejector force: 43 kN Technical data, injection unit Screw diameter: 40 mm Injection volume: 201 ccm Injection pressure: 1860 bar Screw length: 20 l/d Injection rate: 295 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions L x W x H: 4.1m x 1.4m x 2m Total weight: 3900 KG Equipment Screen text in German Screen text in Polish CEE socket 16A CEE socket 32A Hydraulic core pull, 1x Air valve, 1x Machine with water manifold Leveling elements High wear-resistant and corrosion-resistant plasticizing unit Interface for color dosing unit Schuko socket 10A

Condition: good (used), Year of construction: 2011, operating hours: 39,000 h, clamping force: 4,000 kN, Vertical injection molding machine, type Engel elast 1500/400 V compact, for sale. The machine is in good condition and was in operation until recently. Dcjdpfx Aozix I Ajnqei - Year of manufacture: 2011 - Operating hours: 39,458 - Control system: CC200 - Clamping force: 400 tons Further information will follow. Loading will be done with a crane. Available at an additional cost: Busch vacuum pump, Piovan temperature control unit (controlled via CC200) Please contact us if you have any questions.

Condition: good (used), Year of construction: 2004, clamping force: 300 kN, screw diameter: 60 mm, clearance between the columns: 630 mm, displacement volume: 679 cm³, injection pressure: 2,000 bar, injection weight: 618 g, mold height (min.): 330 mm, opening stroke: 1,150 mm, plate width: 995 mm, plate height: 1,050 mm, overall weight: 14,300 kg, Robot W 621-ß077 Hot runner control unit IMM 8 Control system MC 4 Dodpfx Anszixbvjqjci

Condition: excellent (used), Battenfeld TM Xpress 350/2250 injection molding machine Control system: B6P Year of manufacture: 2014 Operating hours: 47,000 hours We offer a Battenfeld TM Xpress 350/2250 injection molding machine in very good technical condition. The machine is regularly serviced, fully functional, and ready for immediate operation. Technical specifications Clamping unit Clamping force: 3500 kN (350 t) Platen dimensions: 1030 × 1140 mm Distance between columns: 710 × 710 mm Dodpfx Ansziulwjqoci Minimum mold height: 300 mm Maximum mold height: 710 mm Maximum opening: 1380 mm Centering ring diameter: 160 mm Ejector stroke: 200 mm Injection unit Screw diameter: 65 mm Injection volume: 1171 cm³ Injection shot weight (PS): 1078 g Maximum injection pressure: 2070 bar Maximum injection speed: 600 mm/s Equipment 4 × pneumatic valve 1 × hydraulic core Dimensions and weight Length: approx. 6.9 m Width: approx. 1.9 m Height: approx. 2.4 m Weight: approx. 13,000 kg

Condition: excellent (used), Year of construction: 2014, BATTENFELD TM XPRESS 350/2250 INJECTION MOLDING MACHINE Control system: B6P Year of manufacture: 2014 Operating hours: 49,462 h Clamping unit Clamping force: 3500 kN Platen dimensions: 1030 × 1140 mm Tie bar spacing: 710 × 710 mm Minimum mold height: 300 mm Maximum mold height: 710 mm Maximum mold opening: 1380 mm Core centering ring diameter: 160 mm Dcodpjziukgefx Anqoi Maximum ejector stroke: 200 mm Injection unit Screw diameter: 65 mm Injection volume: 1171 cm³ Injection weight (PS): 1078 g Injection pressure: 2070 bar Maximum injection speed: 600 mm/s Additional equipment 4 × pneumatic valve 2 × hydraulic core Kneeling system after professional refurbishment Dimensions and weight Machine length: approx. 7,100 mm Machine width: approx. 2,000 mm Machine height: approx. 2,500 mm Machine weight: approx. 17,000 kg The machine is available for inspection and testing after prior arrangement of a date.

Condition: excellent (used), Year of construction: 2005, BATTENFELD HM 270/1330 INJECTION MOLDING MACHINE Year of manufacture: 2005 Clamping unit Clamping force: 2700 kN Dimensions of mounting plates: 1030 × 1020 mm Distance between columns: 710 × 630 mm Minimum mold height: 350 mm Maximum mold opening: 1150 mm Diameter of centering ring: 160 mm Maximum ejector stroke: 200 mm Injection unit Screw diameter: 55 mm Injection volume: 650 cm³ Injection weight (PS): 565 g Dedpfsziuguox Anqsci Injection pressure: 2040 bar Maximum injection speed: 144 mm/s Additional equipment 1 × pneumatic valve 3 × hydraulic cores Dimensions and weight Machine length: approx. 6,200 mm Machine width: approx. 1,800 mm Machine height: approx. 2,300 mm Machine weight: approx. 12,500 kg The machine is available for inspection by prior appointment. PIMM Machinery

Condition: excellent (used), Year of construction: 2014, clamping force: 1,000 kN, Equipment: documentation/manual, Clamping force: 100 t Opening stroke: 500 mm Distance between platten:(b x h) 570x570 mm Clear column spacing: 420x420 mm Ejector stroke: 175 mm Ejector force: 40 kN Dsdpfjzilqkox Anqjci Hydraulic pump: 23,9 kW Screw: 35 mm, screw: L/D 20, 30 % glass Max wept volume 144 cm3 Mth: 35047 pump L x W x H: 3700 x 1650 x 2600mm Weight 3650 kg Language: CZ, English, German Condition: machine is excellent condition working untill 30 CW 2024, now not under power

Condition: excellent (used), Tederic D680 Injection Molding Machine Model: D680 Year of manufacture: 2019 Robot: SW7315DS Robot year of manufacture: 2019 Technical data Parameter Value Clamping force 6,800 kN (680 tons) Column spacing 1010 × 1010 mm Diameter of centering ring (injection side) 250 mm Diameter of centering ring (ejector side) None Minimum mold height 450 mm Maximum mold height 1100 mm Distance between platens 2250 mm Maximum opening stroke 1800 mm Injection volume 2531 cm³ Hydraulic ejector Yes Number of hydraulic circuits 3 Core pulling capability Yes Short cooling circuit Yes Euromap / robot preparation Yes Screw diameter 85 mm Ejector stroke 300 mm Screw type Standard Motor power 53 kW Heater power 37 kW Equipment • SW7315DS linear robot • Hydraulic ejector • 3 hydraulic circuits • Euromap interface • Automation preparation • Short cooling circuit Operating history • Machine year of manufacture: 2019 • Total operating time: 31,272.6 h • Operating time in automatic mode: 9,990.2 h Dcjdpjzilfbjfx Anqoi

Condition: used, Year of construction: 2018, TEDERIC D450/3200 injection molding machine with SW7315DS robot Manufacturer: TEDERIC Model: D450/3200 Year of manufacture: 2020 Serial number: T3045-0141 Robot: SW7315DS Robot year of manufacture: 2018 Technical data Clamping force: 4,500 kN Screw diameter: 75 mm Centering diameter: injection side: 200 mm moving side: 100 mm Column spacing: 780 × 780 mm Minimum mold height: 300 mm Maximum mold height: 780 mm Maximum platen spacing: 1,580 mm Maximum opening stroke: 800 mm Injection volume: 1,741 cm³ Hydraulic ejector: YES Number of hydraulic cores: 2 Cores: on the nozzle side – YES on the closing side – YES programmable – YES Motor power: 56 kW Heater power: 39.1 kW Screw diameter: 75 mm Ejector stroke: 200 mm Screw: bimetallic Machine condition Total operating hours: 42,864 h Automatic operating hours: 16,386 h SW7315DS robot (2018) included. Dcedpjzii Efofx Anqji

Condition: excellent (used), TEDERIC DT500 injection molding machine with RB200CN robot Manufacturer: TEDERIC Model: DT500 Year of manufacture: 2021 Serial number: T05000654 Robot: RB200CN Robot year of manufacture: 2015 Dcedpfjzii D Usx Anqoi Technical data Clamping force: 5,000 kN Screw diameter: 80 mm Centering diameter: injection side: 200 mm moving side: 100 mm Column spacing: 820 × 820 mm Minimum mold height: 320 mm Maximum mold height: 800 mm Maximum plate spacing: 1,650 mm Injection volume: 2,031 cm³ Hydraulic ejector: YES Number of hydraulic cores: 2 Cores: on the nozzle side – YES on the closing side – YES programmable – YES Motor power: 68 kW Heater power: 46 kW Screw diameter: 80 mm Ejector stroke: 200 mm Screw: bimetallic Machine condition Operating hours: 17,437 h Automatic operating time: 4,009 h RB200CN robot (2015) included.

Condition: excellent (used), TEDERIC DT400 injection molding machine with FCW05-1000P robot Manufacturer: TEDERIC Model: DT400 Year of manufacture: 2021 Serial number: T04000648 Robot: FCW05-1000P Robot year of manufacture: 2019 Technical data Clamping force: 4,000 kN Screw diameter: 70 mm Centering diameter: Dcsdpfxszii Ads Anqji injection side: 160 mm moving side: 100 mm Column spacing: 730 × 730 mm Minimum mold height: 280 mm Maximum mold height: 750 mm Maximum platen distance: 1,500 mm Injection volume: 1,347 cm³ Hydraulic ejector: YES Number of hydraulic cores: 2 Cores: on the nozzle side – YES on the closing side – YES programmable – YES Motor power: 40 kW Heater power: 33 kW Screw diameter: 70 mm Ejector stroke: 200 mm Screw: bimetallic Machine condition Operating hours: 21,518 h Automatic operating time: 8,912 h FCW05-1000P robot (2019) included.

Condition: excellent (used), Year of construction: 2015, TEDERIC D250/1100 injection molding machine with SW6310S robot Manufacturer: TEDERIC Model: D250/1100 Dsdpfx Asziiyvsnqsci Year of manufacture: 2015 Serial number: D1025/0747 Robot: SW6310S Robot year of manufacture: 2019 Technical specifications Clamping force: 2,500 kN Screw diameter: 55 mm Centering diameter: injection side: 160 mm moving side: 100 mm Column spacing: 580 × 580 mm Minimum mold height: 250 mm Maximum mold height: 600 mm Maximum platen spacing: 1,150 mm Maximum opening stroke: 550 mm Injection volume: 601 cm³ Hydraulic ejector: YES Number of hydraulic cores: 2 Cores: on the nozzle side – YES on the closing side – YES programmable – YES Motor power: 31 kW Heater power: 19.7 kW Screw diameter: 55 mm Ejector stroke: 160 mm Screw: bimetallic Machine condition Total operating hours: 79,526 h Automatic operating hours: 40,612 h TEDERIC SW6310S robot (2019) included.

Condition: excellent (used), Year of construction: 2007, Engel VC 1350/200 Tech Djdpfx Aszibcijnqeci Clamping force: 200 tons Year of manufacture: 2007 Weight: 14,200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Injection unit: .../1350 Screw diameter: 55 mm Injection volume: 618 cm³ Shot weight (for PS): 562 g Specific injection pressure: 2,183 bar Mould clamping system: 200/... Mould platen dimensions: 860 x 570 mm Mould installation height: 400 mm Opening stroke: 750 mm Maximum platen distance: 1,150 mm Ejector stroke: 180 mm Ejector force: 80 kN Equipment: - 2 × hydraulic core on moving platen - Pneumatic valve - 8 hot runner zones - 8-section rotameter

Condition: used, Year of construction: 2004, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) Dcjdpfezh N Tyox Anqei delivery time: on request terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2022, Krauss Maffei KM 50-55 CX hydraulic injection molding machine Year of manufacture: 2022 STAR picker Fully hydraulic clamping system. MC 6 control system based on an industrial computer with real-time Ethernet technology, equipped with an integrated 21.5" control panel with a color touch screen. Plasticizing unit Complete plasticizing unit for thermoplastics with a screw diameter of 18 mm, with a backflow valve and an open nozzle Nozzle radius 10mm, nozzle opening 4mm TECHNICAL DATA OF THE MACHINE IN STANDARD EXECUTION Clamping unit - Clamping force: kN 500 - Opening force: kN 40 - Dimensions of the mounting plate (h x v): mm 600 x 600 - Distance between columns (h x v): mm 370 x 370 - Mold opening stroke: mm 400 - Minimum mold height: mm 200 - Opening width: mm 600 - Ejector stroke: mm 100 - Ejector force forward/backward: kN 23 / 10 Injection unit - Screw diameter: mm 18 - Ls/D ratio: - 22.2 - Injection pressure: bar 2500 - Injection volume: cm3 20 Dcjdjzhwl Ropfx Anqoi - Injection shot weight 1): g 19 - Injection speed: mm/s 150 - Injection rate standard: cm3/s 38 - Screw speed, standard: rpm 450 - Plasticizing capacity 1): - at standard screw speed: g/s 4.0 Electrical and hydraulic equipment - Rated power of the pump motor: kW 11 - Installed power of the heaters: kW 3.8 - Number of cylinder heating zones: - 4 - Dry cycle time / stroke according to Euromap 6 2): s/mm 1.2 / 259 - Oil tank capacity: dm3 180 Dimensions and weight - Net weight with control cabinet: t 2.55 - Machine dimensions (l x w x h) 3): m 3.53 x 1.41 x 1.96

Condition: used, Year of construction: 2023, 2 x Engel VC 2460/180 injection molding machines, technical version, manufactured in 2023. Dodpfx Anozhudkjqjci