Used Plum for sale (118)

Condition: ready for operation (used), functionality: fully functional, total height: 1,200 mm, total width: 580 mm, total length: 820 mm, input voltage: 230 V, The machine is designed for pitting plums, leaving the plums whole. Electrical connection: 230 V. Machine dimensions mm: 820 x 580 x h1200. Originally, the machine is equipped with 10 blades, but 2 blades were already lost when it was purchased, but this does not interfere with the operation process at all. Only the yield is slightly lower. Productivity with 8 blades: 100 fruits / 1 minute Csdpfx Abew H I Trjcsgn Hole diameter: 30 mm. Machine weight: 100 kg.

Year of construction: 2015, condition: excellent (used), Reportedly very little used Plümat model BFL 851 automatic machine to fill and close flexible pre-sterilized IV-Bags under pharmaceutical conditions. Cgodpfolhqndjx Abcjn Made in 2015, the line consists of frame with safety guard, manual bag feeding, printing station, automatic bag infeed, tube cutting station, filling station, tube welding station, tube cooling station, bag outfeed, control cabinet. The filler is a linear single lane system. The system is in compliance with GMP and FDA standards. - processable bag formats (2 tubes = free tube length 30 mm presealed with Vial stopper & 40 mm sealed by welding or open tube): 100 ml, 250 ml and 500 ml - capacity: 100 ml / 250 ml / 500 ml = 600 bags/hour - filling accuracy: 100 ml = ± 2.0 %, 250 ml = ±  1.0 % and 500 ml = ±  0.7 % - dosage range: 100 ml - 1000 ml - welding method used: heat contact welding - filling system: SIEMENS S7 including counter card with mass-flow measuring system and pneumatic filling valves - controller: SIEMENS S7 Microbox with Profibus DP and TP 1500 touch terminal - power supply: 5.5 kW, 230/380 V, 50 Hz - compressed air supply: approximately 700 l/min, min 6 - max 8 bar - cooling water supply: approximately 4 l/min, temperature 18-21°C - weight: approximately 1350 kg (net) and 1750 kg (gross) - dimensions: 4263 (length) x 1050 (width) x 2140 (height) mm

Condition: used, hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: MW Markisches Werk, hydraulic unit with container -Type: 1324 -Shaft: 12 x 8 mm, see photo techn. drawing Cgsdpfx Abohv S Ezecen -Individual components: see photos -Dimensions: 280/270/H450 mm -Total weight: 9.8 kg

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump Csdpfx Asb Uht Ajbcegn -Hydraulic unit comes from a Jungheinrich electric forklift -2x drives -Filter Control valve -Hydraulic tank: 930/400 / H360 mm -Dimensions: 1000/400 / H800 mm -Weight: 288 kg

Condition: good (used), Plummer Block Housings, Plummer Block Housings, Bearing Block Plummer Block Housing, Plummer Block Housing Unit, Plummer Block Housing Units, SKF Plummer Block Housing, Plummer Block Unit -Manufacturer: FAG, plummer block housing type TVN 312 -Bore diameter: 70 mm -Number: 4x bearing housings available -Price: per piece -Dimensions: 295/120/H163 mm Cgsdpjv Ulaajfx Abcen -Weight: 10.8 kg/piece

Condition: good (used), Plummer Block Housings, Plummer Block Housings, Bearing Block Plummer Block Housing, Plummer Block Housing Unit, Plummer Block Housing Units, SKF Plummer Block Housing, Plummer Block Unit -Manufacturer: SKF, plummer block housing type SN 212 -Bore diameter: 72 mm -Quantity: 1x bearing housing available Cedpfx Abov Ulf Necsgn -Dimensions: 255/105/H135 mm -Weight: 4.2 kg

Condition: good (used), Plummer Block Housings, Plummer Block Housings, Bearing Block Plummer Block Housing, Plummer Block Housing Unit, Plummer Block Housing Units, SKF Plummer Block Housing, Plummer Block Unit -Manufacturer: FAG, plummer block housing type SN511 -Bore diameter: 50 mm -Number: 2x bearing housings available Cgedpfov Uld Sex Abcon -Price: per piece -Dimensions: 255/95/H135 mm -Weight: 4.6 kg/piece

Condition: used, Plummer block housings, plummer block housings, bearing block plummer block housings, plummer block housing units, plummer block housing units, plummer block bearings SKF, plummer block housing units Cjdpfxefk Afce Abcogn -SKF: Plummer block housing type SNH 509 -Inside diameter: 57 mm -Price: per piece -Number: 2 pieces -Dimensions: 204/86/H110 mm -Weight: 2.9 kg/piece

Condition: good (used), Plummer block housings, plummer block housings, bearing block plummer block housings, plummer block housing units, plummer block housing units, plummer block bearings SKF, plummer block housing units -FAG: Plummer block housing type SNV 140 -Price: per piece -Number: 4 pieces -Dimensions: 315/140/H185 mm -Weight: 9.4 kg/piece Csdpfx Abofk Ad Socegn

Condition: used, Plummer block housings, plummer block housings, bearing block plummer block housings, plummer block housing units, plummer block housing units, plummer block bearings SKF, plummer block housing units -SKF: Plummer block housing type SNA 516-613 -Price: per piece Cgsdpfofk Afiex Abcjn -Number: 2 pieces -Dimensions: 315/120/H170 mm -Weight: 9 kg/piece

Condition: good (used), Plummer Block Housings, Plummer Block Housings, Bearing Block Plummer Block Housing, Plummer Block Housing Unit, Plummer Block Housing Units, SKF Plummer Block Housing, Plummer Block Unit -Manufacturer: SKF, plummer block housing type SNH 513-611 -Bore diameter: 77 mm Cgjdjv Ulhkopfx Abcsn -Quantity: 1x bearing housing available -Dimensions: 275/110/H150 mm -Weight: 6.6 kg

Condition: good (used), Year of construction: 1999, saw blade diameter 450 mm Cedpsxqrdmjfx Abcegn cutting diameter 150 mm saw blade diameter möglich: 400 + 370 mm Saw blade 50 mm saw blade feed stepless ca. 0 - 1000 mm/min rapid return speed 3300 mm/min table rotating + / - 90 Grad cutting speed 7 - 43 m/min total power requirement 4 kW weight of the machine ca. 1050 kg Overall size 1020 x 1350 x 2000 mm Semi-automatic cold circular saw, made by Kaltenbach, type KKS450H, with Siemens S7 PLC control for cutting speed and sawing height, feed roller conveyor, discharge roller conveyors with hand crank, remote control and digital display. Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Year of construction: 2006, max. wheel diameter 150 mm gear width 100 mm max. module 3 min. module 1 ical angle +/- 45 ° slide stroke 100 mm number of teeth 5 - 150 Cedpfx Ajygm Rusbcjgn clamping length max. 350 mm control Siemens 840 D rated capacity 38 kVA dimensions of machine 2,45 x 2 x H = 2,5 m weight of the machine ca. 8 t

Condition: used, chamfer lenght 1370 mm Various tooling: 65 x 40 mm with 4 openings: 8, 10, 10, 35 mm. Cjdpoul Ew Ajfx Abcogn 6 pieces: 1370 mm Prices excl. VAT Machine dealer with own stock of 1600 m².

Condition: used, chamfer lenght 3050 - 4020 mm 4 pieces of upper tools for press brake: Deer foot upper tool No.1, picture. No. 2: Dimensions: 3000 x 75 mm, price = 670,-- Deer foot upper tool No.2, picture. No. 3: Dimensions: 3000 x 120 mm, price = Cjdpfx Abeva I Spscsgn 670,-- Deer foot upper tool No.2 length: 4020 mm, dimensions see sketch, price = 780.-- (Image 5 & 6) Deer foot upper tool No.4 length: 3050 mm, dimensions see sketch, price = 650.-- Prices plus VAT (Image 7 & 8) Machine dealer with own stock of 1600 m².

Condition: used, stamp capacity 2 - 63 mm throat 110 / 200 mm Cgjdpfx Abeuu S Dnscon Various Destaco punching iron, some with accessories: No. 3: Type 102-200, accessories: approx. 12 sets of punches and dies, technical data: see picture, price per piece incl. accessories: 350,- No. 6 & 7: Type 103-200, accessories: approx. 12 sets of punches and dies, technical data: see picture, price per piece incl. accessories 500,- 1 Raskin punching iron type 10 JL 200, throat 210 mm, install height 238 mm, material thickness 3 mm in max. 40 kg/mm². pice 175,-- EUR 1 Raskin punching iron type 15 BL 100, throat 110 mm, install height 149 mm, material thickness 3 mm in max. 40 kg/mm². pice 120,-- EUR Diverse punching dies. We can also sell each of them. Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Year of construction: 1995, x-travel 300 mm y-travel 200 mm z-travel 350 mm table surface area 700 x 270 mm taper in main spindle ISO 40 turning speeds 8: 150 - 1660 U/min turning speed range - horizontal 8. 110 - 1230 U/min feeds 8: 25 - 285 mm/min weight 900 kg quill stroke 60 mm total power requirement 3,7 kW range L-W-H 1,3 x 1,38 x 1,65 m Universal tool milling machine with 2 axis digital display and swiveling vertical milling head with quill, fixed + swiveling table, slotting head, automatic feeds and rapid traverse in all three directions. Machine from a repair shop. It has only a few working hours, the accuracy is very good. Machine with a just low special price. Price new about € 24000,--. Cgsdjvxllkspfx Abcen Machine dealer with own stock of 1600 m².

Condition: used, faceplate diameter 315 mm Cgsdpfxeycxf Nj Abcon bore 75 / 95 mm Wedge bar chuck with flange short cone / Gr. 6, + 2 sets of base jaws included top jaws. Machine dealer with own stock of 1600 m².

Condition: used, diameter 315 mm Cedoycxfvjpfx Abcsgn bore 89 mm Wedge bar chuck with short taper DIN 55027 / Gr. 8, for 4 studs, 1 set Baking, studs not available. Machine dealer with own stock of 1600 m².

Condition: used, Price for one piece! Cgedoxwp E Iopfx Abcen

Condition: used, pressure ca. 5 t dayligth 110 mm throat 40 mm weight of the machine ca. ca. 50 kg dimensions of the machine ca. 1,2 x 0,5 x 1,3 m Codpfx Abexr Ravecogn 6 t (estimaeted) hand-operated spindle press. The machine is professionally and durably lashed. Machine dealer with own stock of 1600 m².

Condition: used, chamfer lenght 480 - 4045 mm 4 pieces less used of upper tools: tool No 5 length: 3050 mm, dimensions see sketch, price = 710,- Cgodpfx Absuh E Ryscsn tool Nr 6 Length: 3073 mm, dimensions see sketch, price = 970,- tool No 9 L = 1925 mm divided, dimensions see sketch, price = 850,- tool Nr.10 length: 1520 mm, dimensions see sketch, price = 850,- Prices excl. VAT Machine dealer with own stock of 1600 m².

Condition: used, tool clamping area 1 - 32 mm Csdpfx Aett Eauobcjgn weight 8 - 12 kg Driven toolholders 1: Eppinger, Mod. 6035-3: 270 Euro 2: Eppinger, Mod. 6052: 360 Euro 3: Eppinger, Mod. 6049-2: 360 Euro 4: Wendel, Mod. A 3930: 720 Euro 5: Eppinger, Mod. 10809-1-3: 720 Euro Machine dealer with own stock of 1600 m².

Condition: as good as new (ex-display), centre height 130 mm spindle bore 18 mm ratio 40:1 swivellable - 10° bis 90° ° groove width 16 / 18 mm weight 35 kg Cgodpfxjuvd Axe Abcen dimensions of the machine ca. 0,5 x 0,25 x 0,25 m Unused semi-universal dividing set: - Spindle in precision tapered roller bearings - Phosphor bronze worm wheel, helix Cr-NI steel, hardened and ground - Translation disengageable for direct sharing - each division 2 to 50 and many divisions to 380 accessories: Tailstock, 2 part washers, centering point, driver and chuck flange Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1975, turning diameter over bed 380 mm turning diameter over slide rest 215 mm turning length 1250 mm spindle bore 41 mm bed width 340 mm number of spindle speeds 12 spindle turning speed range 14-2800 U/min Cjdpfxoycxf Ao Abcsgn total power requirement 6 kW weight of the machine ca. 1,85 t dimensions of the machine ca. 3 x 1 x 1,35 m Special price sale directly from the factory! Machine dealer with own stock of 1600 m².