Used Pmh for sale (34)

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Model: PMH DS25-32LD twin-screw extruder Year of manufacture: 2022 Condition: very good Category ID: 452 Type: PMH twin screw extruder PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with several kneading zones and a decompression zone (atmospheric degassing). A blind cover for the decompression zone is included in the scope of delivery. Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. The head plate is equipped with a mass pressure sensor. Bjdpfeznkx Dox Aa Eolp The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. tool adapter with 4-hole nozzle plate Options: Vacuum pump for the degassing zone (only atmospheric degassing offered) 3 metre water bath Air-Knife Used strand granulator If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, Our compact extruder model EX20-25d Manufacturer: PMH GmbH Screw diameter [mm] 20 Blodsq R Tkwjpfx Aa Eep Screw length [L/D] 25 Screw speed [min-1] 10-192 Screw nitrided Torque 55Nm Drive Three-phase drive with frequency converter Drive power [kW] 1.1kW Barrel material: nitrided Electrical connection values 3 / N / PE Supply voltage [V] 400V at 50 Hz Control voltage [V] 24V Ceramic heating tapes [W] 1200W Number of heating tapes 3 Max. Output approx. 5kg/h Max. Processing temperature [°C] 300

Year of construction: 2026, condition: new, functionality: fully functional, Conical laboratory single-screw extruder EX 60/30 The extruder is designed for processing light, free-flowing granular materials. Due to its screw size, the extruder is suitable for laboratory and testing applications. The nitrided screw with a conical inlet section is fed with materials via a hopper, which then flow through the large inlet opening into the cylinder. Subsequently, the raw materials are compressed in the cylindrical screw section and discharged through a die. A direct drive with an upstream thrust bearing forms the drive train. Ceramic heating bands also allow for high processing temperatures. A shielding cooling system is installed between the material hopper and the first heating zone. Optionally, we also offer the following machines: The strands are passed through a water bath with a stainless steel tank to the strand granulator. Blsdpfx Aezhamwea Esp A screen changer can also be offered as an option between the extruder and the die. Screw speed 150 Current 29.5A CEE-63A

Year of construction: 2024, condition: new, Adhesive water blow-off for a plastic strand (filament) up to 4 mm in diameter Blodpjq H Sqhsfx Aa Ejp Other dimensions up to 20 mm on request

Condition: used, Year of construction: 2005, The machine is dosing ClO2 into water to use it in a Rinser. Blodpfj Ahladjx Aa Eep

Condition: used, Year of construction: 2006, Suitable for regrinding and making new wood and metalworking tools of all kinds. Accessories: Pallet loader, Quinto software, version 4.3b, Software for cylindrical cutters, Software for conical cutters, Software for hemispherical conical cutters, Software for two-flute cutters, Software for three-flute cutters, Software for hob cutters, Software for up-and-down cutters, Software for wood drills, Software for tools with an axial angle, Software for taps, Software for step drills, Software for drills, types H and S, ISO axial software, ISO spiral software, Elbaron electrostatic mist extractor, Hydraulic workpiece clamping, Renishaw measuring probe, Automatic fire-extinguishing system, Automatic centralized lubrication system, Glass scales on the linear axes, 1 loading pallet, 16 grinding wheel flanges, 4 collets, 1 collet chuck, 1 automatic 5-jaw chuck, PMH. X-axis longitudinal movement: 380mm Y-axis transverse movement: 280 mm Z-axis vertical movement: 280 mm C-axis swivel range: 340° A-axis rotation range: 360 ° Center height: 210 mm Workpiece holder: ISO 50 Grinding wheel diameter: Max. 200 mm Drive power grinding lockers: 7,5 kW Grinding spindle speed: stepless 0 - 9000 rpm Connected load: 29 kW (400 V / 50 Hz) Bjdjz Rpnhspfx Aa Ejlp Dimensions W x D x H: 1590 x 1930 x 2550 mm mass: approx. 4800 kg colour: turquoise / grey

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: SG10, PMH Filament strand pelletizer, Type SG10 compact machine with two drives for feeding and cutting rotor designed for one strand with max. 3.5 mm diameter The speeds of both drives are infinitely variable. This allows for a wide range of pellet lengths Bedokyt T Sjpfx Aa Eslp

Year of construction: 2026, condition: new, Extruder 30 mm - 28 l/d Bsdpfxoi Tu U Uj Aa Eolp with die for weldingwire extrusion or profilextrusion with cooling bath with adhesive water blow-off with haul-off with winder and guiding device

Year of construction: 2026, condition: new, functionality: fully functional, The laboratory extruder model EX20-25d is designed for small-scale material development, small batches, or filament extrusion. It has a plasticising capacity of 5kg/h. Our extruder model is designed with a bimetallic barrel and through-hardened screw, allowing for high-temperature processing (up to 400 degrees). Bjdpsiv H Ekjfx Aa Eolp This enables the processing of abrasive raw materials, engineering plastics, PEEK, metal compounds, ceramics, and fibre-reinforced materials. Inspect available machines at our factory in Königswinter. We can also provide machines in other dimensions.

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 2.22-00005, used belt puller from the manufacturer Bellaform/Pütz TYPE: A400-40 Year of manufacture: 2013 Contact length: 400 mm Belt width: 40 mm Bljdpfx Asuixhzoa Ejp Speed: 386 m/min fully functional

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 7 / 8939 / 05 / 21, Used Reifenhäuser extruder Bedpfxew Np Tks Aa Eolp Type: RH-241-1-50-30 WE DC-motor with 37 kW capacity screw dimensions : diameter 50 mm – 30 L/D Grooved feeding zone With manual screen changer Fully functional You are welcome for inspection this (and further) extruders in our warehouse Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Year of construction: 1993, condition: good (used), functionality: fully functional, machine/vehicle number: RH 241-1-50-30v, used REIFENHÄUSER single-screw extruder with screw size : diameter 50 mm x 33v grooved feed zone and degassing zone type RH 241-1-50-30v with DC-drive 30,2 kW year 1993 with installed switch cabinet Fully functional You are welcome to view this (and other) extruders Bodpfx Aaspy Eygo Eslp at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Year of construction: 2001, condition: excellent (used), functionality: fully functional, machine/vehicle number: 3063, used Leistritz Micro27/GL-32D laboratory twin-screw extruder, machine no. 3063 Year of manufacture: 2001 Motor power: 10.5 kW Screw speed up to 500 rpm Screw diameter: 27 mm Cylinder material: 1.8550 nitrided Nitriding layer 0.5-0.6 mm Screw material: 1.2379 Volumetric dosing Brabender mounted on the gearbox and included in the scope of delivery. Single temperature control unit included in the scope of delivery. Atmospheric degassing, without blind plug Documentation in German available in paper form. tool with nozzle 1 hole approx. 3 mm Condition: used, functionally tested, as is, without warranty You are welcome to view this (and other) extruders Bjdpfx Aaoyc Sfpj Eelp at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Condition: excellent (used), Band sawmill consisting of: - Tension carriage EWD EW 1000 - Band saw EWD EBB 1400 - Roller conveyor for transporting the sawn goods (manufacturer SPRINGER) - Raised cabin - Tracks - Control cabinets - Accessories Optionally with complete sharpening room equipment: - Sharpening machine Vollmer CAL 200 - Upsetting machine Vollmer PMH - Flanking (leveling) machine Vollmer EMS Log band saw EWD Esterer EBB1400 Vertical band saw for round wood Roll diameter: 1400 mm Roll width: 200 mm Saw blade width: 206 mm Saw blade thickness max. 1.47 mm Blade speed max. 55 m/s (winter & summer drive pulley available) Main motor: 55 kW The roller crowning was reground in 2009 Band saw carriage EWD Esterer EW1000 hydraulic tensioning carriage Year of manufacture 1991 4 tensioning blocks with 3 log turners tensioning block opening max. 1000 mm hook opening max. 930 mm total length: 6000 mm total width: 2450 mm total height: 1750 mm track width 1300 mm The band sawmill was bought second-hand in 2004/2005, reinstalled by Esterer, but never put into full operation as cutting is almost exclusively done with the gang saw. The band saw has only run for 500 operating hours since 2004! very good condition - available immediately - can be demonstrated by appointment Sharpening room equipment: 01. Vollmer CAL 200 sharpening machine Year of manufacture 2000 Blodjvtwzmopfx Aa Eep Tooth feed from the left CNC machine for grinding cutting and block band saw blades with straight grinding and wet grinding Full enclosure with extraction for CBN and corundum grinding wheels Incl. 2 Borazon grinding wheels 10mm 02. Vollmer PMH upsetting machine Saw upsetting machine for band saw blades Max. blade thickness 3.5 mm 03. Vollmer EMS flank/leveling machine Leveling machine for upset band saw blades converted to self-drive in combination with CAL 200 incl. limit switch on the saw clamping! Further details: The sharpening machines were purchased second-hand in 2007 and stored covered on pallets or wooden structures in a dry, heated garage. Because the band saw was never put into full operation, the sharpening room equipment was repeatedly postponed, so that today the machines are in the same condition as when they were delivered. All operating instructions, descriptions and circuit diagrams are neatly enclosed in a box. In 2018 and 2023 the machines were cleaned of surface dust outside, lightly oiled with graphite spray and stored in the garage again! immediately available - fully functional - very good condition Location: Austria, near St. Pölten

Condition: used, Year of construction: 1984, functionality: fully functional, Used granulate classifier Fully functional Year of manufacture: 1984 Bodpfxjw Nfizo Aa Ejlp

Condition: used, Vollmer hydraulic press Type PMH 10 U Blodpfxeci Dfhj Aa Esp with support blocks in very good condition

Year of construction: 1990, condition: excellent (used), functionality: fully functional, Reifenhäuser extruder Type: RH 51-1-35-25 Bjdowxvadopfx Aa Eolp 5.6 kW DC motor 103 rpm 500 bar melt pressure sensor 3 zone screw 35-25d fully functional You are welcome to view this (and other) extruders at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Year of construction: 1987, condition: used, Vollmer hydraulic press Type PMH 10 U Blodpfx Aajcbrq Tj Ejp with fixture for band saw blades.

Year of construction: 2026, condition: new, 30 mm extruder with cross-head for smallest coating object´s, Bodpfxjf Uc Urs Aa Ejlp with cooling bath, puller and winder with guiding device

Condition: new, Year of construction: 2026, Our belt haul-off can be built in different sizes. 40-80 m/min Contact length 170mm to 800mm MADE in GERMANY Bsdpohd Ndxsfx Aa Eslp

Year of construction: 2026, condition: new, extruder 30 mm with die-face pelletizer, the housing, made from stainless steel, is swivelling. Bledpfx Ajf Uc Ugsa Eep the lenght of the granules is adjustable by means of the cutting speed. optionally, we offer a transport belt for cooling the granules.

Year of construction: 2026, condition: new, functionality: fully functional, Winder with traverse guide, for different bobbin sizes, Blsdpfx Ajdv N Egoa Ejp traverse width and speed are adjustable, plug in and play Ideal for small tubes, welding wire and filaments MADE in GERMANY

Year of construction: 1999, condition: good (used), gravimetric dosing unit with 2 hopper stations Bodpfx Aasd D Nmxj Ejlp and total 4 components with origin control cabinet, touch panel and docu

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: EX30, We have designed our compact extruder model EX30-28d so that it can be used in all extrusion processes. We offer this extruder as co-extruder or laboratory extruder, as well as for the extrusion of welding wire, filament, solid rods, hoses, or for pelletizing with hot die or strand pelletizer. We also realize other machine dimensions, please contact us. Our standard extruder with nitrided screw and barrel covers most polymer raw materials. Optionally, we also offer this extruder with wear-resistant screw and barrel, for example: for PEEK, titanium, ceramics, etc. Bsdoby Rfpopfx Aa Ejlp

Year of construction: 2026, condition: new, functionality: fully functional, new PMH filament line extruder 30 mm - 28 l/d with noozle for 3D-filament with cooling tank with blow-up system for adhesive water with Laser control system (option) with puller with filament accumulator (option) Blsdpfx Aech Sfqsa Esp with winder and traverse guide MADE in GERMANY