Used Pm Trac for sale (6,007)

Condition: excellent (used), Year of construction: 2000, 2 static spreading plate separators for the extraction of filler sand 1 x type: CC1180 ST and 1 x type: CC1180R Pick-up size: 4-5 mm End product: up to 150 µm Electric drive 7.5 and 11 kW Ncsdpfxjqi Hcgo Adwol in addition a cyclone - model: Hurriclone from PM-Technologies

Condition: good (used), Year of construction: 2004, only approx. 45 million impressions, Plus Version, CPC control with integrated register, Alcolor, Autoplate, Baldwin dampening circulation and cooling, blanket washing device, pull mark control, ultrasonic double sheet control, sheet decurler, Mediprint powder unit Ncodsx R Tgrjpfx Adwol

Condition: excellent (used), Year of construction: 1979, operating hours: 7,200 h, fuel type: diesel, first registration: 09/1979, color: green, total height: 2,850 mm, total length: 5,200 mm, total width: 2,200 mm, = Additional Options and Accessories = - Brake booster - High beam - Toolbox - Power take-off (PTO) Ncodpfx Asx Na Uasdwjl = Additional Information = Model year: 1979 Front axle: Articulated; Tire tread left: 80%; Tire tread right: 80% Rear axle: Tire tread left: 80%; Tire tread right: 80% Unladen weight: 3,980 kg Payload capacity: 2,520 kg Gross vehicle weight (GVW): 6,500 kg Technical condition: very good Visual condition: very good

Condition: ready for operation (used), functionality: fully functional, power: 51 kW (69.34 HP), fuel type: diesel, empty load weight: 5,500 kg, maximum load weight: 500 kg, axle configuration: 4x4, Year of construction: 1983, operating hours: 13,859 h, Truck/Tractor Unit MB-Trac 700K with hydraulic arm, registered as a tractor unit. We would be happy to demonstrate the vehicle for you. It is in good overall condition, fully operational, and immediately available. Technical specifications: Hydraulic arm: Tirre 9001 loading crane Max. outreach: 7.4 m Max. lifting capacity at max. outreach: 1,100 kg Max. lifting capacity at min. outreach: 1,100 kg Ncodexvyv Uopfx Adwol Permissible total weight: 3,500 kg Transmission: 4-speed (split range/hare/tortoise gear) Engine: MB Daimler, 51 kW Displacement: 4 l Year of manufacture: 1983 Axle configuration: 4x4 Operating hours: 13,859 km Unladen weight: 5.5 t Gross weight: 6 t Gross weight with trailer: 40 t Body length x width: 104 cm x 220 cm Hydraulic connections for additional equipment at the front and rear + PTO shaft connection. The vehicle is equipped with four new tires plus a spare wheel.

Condition: good (used), functionality: fully functional, Year of construction: 1980, operating hours: 6,000 h, power: 92 kW (125.09 HP), motor manufacturer: Mercedes, gearing type: mechanical, fuel type: diesel, maximum speed: 40 km/h, first registration: 11/1980, next inspection (TÜV): 11/2026, color: light green, machine/vehicle number: 44316100011477, Equipment: additional headlights, cabin, front-end loader, hydraulics, Selling MB Trac in top condition. Brakes, oils, everything freshly serviced. Drives great. Ncodev U Nxtepfx Adwjl

Condition: used, Year of construction: 2007, Truck loading crane / loading crane / crane PM series 12.5 Year of construction: 2007 2x hydraulically extendable Equipped with remote control. With 5th function and rotator. Capacities: 2710 kg at 4.2 meters 1800 kg at 6.1 meters 1310 kg over 8.1 meters Njdpowx Etasfx Adwscl Cevoman bvba. Lenskendijk 5 2200 Herentals Belgium

Condition: excellent (used), Catalogue number 7248 TECHNICAL DATA - max. workpiece height: 160 mm - spindle working length: 250 mm - spindle diameter: 40 mm - max. tool diameter: 220 mm - worktable (length/width): 420x1010 mm - motor: 11 kW - 2 pneumatic workpiece clamps - extraction port diameter: 180 mm - dimensions (L/W/H): 1500x1010x1560 mm - weight: 689 kg Ncsdpfxsrf Tahe Adwel ADVANTAGES – German manufacture – Used milling machine, in very good condition Net price: 31,900 PLN Net price: 7,590 EUR depending on exchange rate of 4.2 EUR (Prices may change in case of significant exchange rate fluctuations)

Condition: used, mileage: 2,13,000 km, power: 103 kW (140.04 HP), first registration: 02/2016, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 3, loading space length: 4,300 mm, loading space width: 2,000 mm, loading space height: 400 mm, Year of construction: 2016, Equipment: ABS, air conditioning, RENAULT MAXITY 140 DXI / 4x2 Perfect condition ? YEAR OF PRODUCTION: 2016 ? MILAGE: 230 000 km AIRCONDITION PLATFORM: 430 x 200 x 40 cm (L x W x H) CAPACITY: 800 kg Total weight: 3 500 kg WHEELBASE: 290 cm TIRE SIZE: 185/75R16C CRANE: PM SERIE 3.6 3623 TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? Nsdpfsyc A Nlsx Adwjcl LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 83722

Condition: new, Year of construction: 2026, CORMAK LUFT 1500 VSD+PM Compact screw compressor with dryer – compact set for demanding applications – ENERGY SAVER SET INCLUDES: LUFT 1500 VSD+PM COMPACT screw compressor with dryer. Horizontal compressed air receiver 500 L. Key features that distinguish these models: 1. Permanent Magnet (PM) Motor Technology Most Energy Saver compressors use Permanent Magnet motors. Unlike standard induction motors: They achieve efficiency levels compliant with IE4 or even IE5 standards. They maintain high efficiency even at very low speeds, where standard motors lose performance. They are smaller, lighter and generate less heat. 2. Advanced Inverter Control (VSD) The core of the Energy Saver line is a frequency converter (inverter). Demand matching: The compressor does not operate on an “all-or-nothing” basis. If your system requires only 30% capacity, it reduces speed accordingly, consuming proportionally less energy. Elimination of idle operation: Conventional compressors often run unloaded for several minutes after filling the tank, consuming around 25–30% of rated power without producing air. Energy Saver models virtually eliminate this loss. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz, eliminating current surges at start-up, which: Protects the plant’s electrical installation. Allows frequent start-stops without overheating the windings. 4. Real Savings In practice, Energy Saver technology reduces electricity bills by 30% to 50% compared with fixed-speed compressors. It also maintains very stable network pressure (within 0.1 bar), essential for precision equipment such as laser cutters. Extended service life: Smooth pressure and temperature changes prolong screw element life. Technical Parameters Motor power 11 kW / 15 HP Voltage 400V / 50Hz Output 0–6 bar 1620 L/min Output at 6 bar 1580 L/min Output at 8 bar 1350 L/min Ncsdjychbajpfx Adwol Output at 10 bar 1230 L/min Outlet connection (G) 1" Dimensions 1600 × 740 × 1750 mm Weight 500 kg

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK LUFT 1000 VSD+PM Compact Screw Compressor with Dryer – Compact Set for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 1000 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 500 L Key Features That Distinguish These Models 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels compliant with IE4 or even IE5 standards Maintain high efficiency even at very low rotational speeds (standard motors lose efficiency outside their nominal range) Ncsdpfx Aoycg Ufodwjl Are smaller, lighter, and generate less heat 2. Advanced Variable Speed Drive (VSD) Control The core of the Energy Saver line is the frequency inverter (VSD). Demand-based operation: The compressor does not operate in an “all-or-nothing” (load/unload) mode. If your system requires only 30% capacity, the compressor reduces its speed and consumes proportionally less energy. Elimination of idle running: Traditional compressors often continue running for several minutes after the tank is filled, consuming approx. 25–30% of nominal power without producing air. Energy Saver models almost completely eliminate this energy loss. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Protects the electrical installation in the facility Allows frequent start/stop cycles without the risk of winding overheating 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the air network (with accuracy up to 0.1 bar), which is crucial for precision equipment such as laser cutting machines. Extended service life: The absence of sudden pressure and temperature spikes significantly extends the lifespan of the screw element. Technical Specifications Motor power: 7.5 kW / 11 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 990 L/min Air delivery at 6 bar: 990 L/min Air delivery at 8 bar: 950 L/min Air delivery at 10 bar: 950 L/min Outlet connection (G): 3/4" Dimensions: 1495 × 600 × 1600 mm Weight: 350 kg

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK LUFT 1000 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 1000 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 270 L Key Features of the Energy Saver Series 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Ncsdpfsycg Tnex Adwsl Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Motor power: 7.5 kW / 11 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 990 L/min Air delivery at 6 bar: 990 L/min Air delivery at 8 bar: 950 L/min Air delivery at 10 bar: 950 L/min Outlet connection (G): 3/4" Dimensions: 1495 × 600 × 1440 mm Weight: 290 kg

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 500 L Key Features of the Energy Saver Series 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Ncjdpfxeycg Rys Adwol Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 1840 × 640 × 1470 mm Weight: 320 kg

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 270 L Key Features of the Energy Saver Series 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Ncodpfx Adoycg I Sewel Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 1495 × 520 × 1340 mm Weight: 250 kg

Condition: used, Electric chain hoist crane DEMAG Type PM 8 - Manulift Serial No. 5319450 Year of manufacture: 1979 Load capacity: 80 kg Hook travel: 2.9 meters Distance from suspension to load hook: 700 mm Main lifting speed: 12 m/min Precise lifting speed: 2 m/min 1 fall = 80 kg Nsdjxcbnlopfx Adwjcl Manulift hand control directly on the crane hook Mains connection: 380 Volt, 50 Hz Weight: 20 kg in good condition

Condition: new, Year of construction: 2026, CORMAK LUFT 1000 VSD+PM Screw Compressor – Compact Power for Your Business – ENERGY SAVER Ncedpfxoycc Egj Adwjl Are you looking for a professional solution to power pneumatic tools in a workshop, paint shop, or a small production line? The CORMAK LUFT 1000 VSD+PM screw compressor is the perfect solution. With a power output of 7.5 kW and an impressive actual air delivery of up to 990 l/min, it provides a constant supply of compressed air, essential for the efficient operation of impact wrenches, blow guns, and spray painting equipment. This 400V-powered model is designed for continuous operation, making it ideal for demanding applications such as small workshops, tire service centers, and craft businesses. Investing in a CORMAK screw compressor is a step toward significantly improved working comfort—say goodbye to noisy piston compressors and enjoy quieter, more stable performance. The LUFT 1000 VSD+PM features a reliable and robust direct drive system that eliminates vibrations and the need for belt transmission adjustments. This proven solution ensures stable operation and long service life by providing direct power transfer from the motor to the screw module. The maximum pressure generated by this screw compressor is 10 bar. Full control over operating parameters is provided by an intuitive MAM-series electronic control panel, giving you access to key compressor data and enhancing flexibility and process control. Technical Specifications Motor power: 7.5 kW / 11 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 990 l/min Air delivery at 6 bar: 990 l/min Air delivery at 8 bar: 950 l/min Air delivery at 10 bar: 950 l/min Outlet connection (G): 1/2" Dimensions: 900 × 600 × 840 mm Weight: 120 kg

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Screw Compressor – Compact Power for Your Business – ENERGY SAVER Are you looking for a professional solution to power pneumatic tools in a workshop, paint shop, or a small production line? The CORMAK LUFT 700 VSD+PM screw compressor is the perfect choice. With a power output of 5.5 kW and an impressive actual air delivery of up to 690 l/min, it ensures a constant supply of compressed air, essential for the efficient operation of impact wrenches, blow guns, and spray painting tools. This model, powered by 400V, is designed for continuous operation, making it ideal for demanding applications such as small workshops, tire service centers, and craft businesses. Investing in a CORMAK screw compressor is a step toward significantly improved working comfort—say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The LUFT 700 VSD+PM features a reliable and robust direct drive system that eliminates vibrations and the need for belt transmission adjustments. This proven solution guarantees stable performance and long service life by ensuring direct power transfer from the motor to the screw module. The maximum pressure generated by this screw compressor is 10 bar. Full control over the operating parameters is provided by an intuitive MAM-series electronic control panel, giving you access to key compressor information and increasing flexibility and control over your processes. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 l/min Air delivery at 6 bar: 690 l/min Air delivery at 8 bar: 650 l/min Ncedpfx Adjycctqewjl Air delivery at 10 bar: 650 l/min Outlet connection (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 100 kg

Condition: new, Year of construction: 2026, The LUFT 1500 VSD+PM COMPACT screw compressor with a refrigerated compressed air dryer. The LUFT series screw compressors from the Polish brand CORMAK combine state-of-the-art pneumatic solutions with the use of high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Technical parameters Motor power: 11 kW / 15 HP Voltage: 400 V / 50 Hz Ncedoyb Dmispfx Adwel Air delivery at 0–6 bar: average 1650 L/min Air delivery at 6 bar: 1580 L/min Air delivery at 8 bar: 1320 L/min Air delivery at 10 bar: 1230 L/min Outlet connection diameter (G): 1" Dimensions: 1600 × 740 × 1050 mm Weight: 380 kg

Condition: new, Year of construction: 2026, The LUFT 1000 VSD+PM COMPACT screw compressor with a refrigerated compressed air dryer. The LUFT series screw compressors from the Polish brand CORMAK represent the most advanced solutions used in pneumatics, combined with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high efficiency guarantee effective and trouble-free operation. Ncjdpoybz Spefx Adwjl Technical parameters Motor power: 7.5 kW / 11 HP Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: average 990 L/min Air delivery at 6 bar: 990 L/min Air delivery at 8 bar: 950 L/min Air delivery at 10 bar: 950 L/min Outlet connection diameter (G): 1/2" Dimensions: 1470 × 620 × 900 mm Weight: 130 kg

Condition: new, Year of construction: 2026, English translation: The LUFT 700 VSD+PM COMPACT oil-lubricated compressor with dryer features a traditional belt-driven transmission, which results in significantly easier maintenance and lower service costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and when worn, the belt can be easily replaced with a new one. This design also ensures longer service life of components. The absence of a rigid connection between the motor and the compressor’s working elements reduces wear and mechanical stress. The maximum pressure generated by this screw compressor is 10 bar. Full control over the operating parameters is provided by an intuitive MAM-series electronic control panel, which gives access to key device information, increasing flexibility and control over processes. Technical parameters Motor power: 5.5 kW / 7.5 HP Voltage: 400 V / 50 Hz Nodsybvkajpfx Adwocl Air delivery at 0–6 bar: average 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection diameter (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 95 kg

Condition: ready for operation (used), Year of construction: 2025, pressing force: 122 t, This ITALPRESSE XL/6 30-13 PM BO veneer press was manufactured in 2025. Consider the opportunity to buy this ITALPRESSE XL/6 30-13 PM BO veneer press. Contact us for more information. Additional equipment • Mylar Foil Attached to Upper and Lower Press Plates Ncjdpfx Aoyan Sgodwsl • Electronic Flatness Control (EFC) for Incorrect Loading Protection Machine Benefits Technical Machine Benefits • Dimensions of heating plates: 3000 x 1300 mm • Number of heating plates: 2 pcs • Number of levels: 1 • Level opening: 370 mm • Max temperature of heating medium: 120°c • Working temperature: 70-90°c • Installed electrical heating power: 18 kw • Operating voltage: 400 v- 50hz- 3 ph Extra Information Features: Touch Screen SIEMENS 4.3 Inch TFT Digital Press Timer Digital Temperature Controller Digital Working Pressure Controller Day/Week Timer for Heating Switch-On Time Automatic Hydraulic Pressure Calculation Error Display and PLC Control Save and Recall up to 200 Work Programs Pre-Press Pressure and Time Settings Safety Devices: Two-Hand Release with Safety Circuit Safety Rip Cord around the Machine Safety Support for Lower Press Table Protective Plate for Rack/Gear Safety Instructions Sticker CE Standard Compliance CE Declaration of Conformity Special Processing of Solid Steel Heating Plate Surface Switching Off Left Cylinder Row

Year of construction: 1999, condition: used, Membrane press Orma PM/AIR Year of construction 1999 Serial number 52850199 Dimensions 2300*900mm Max panel size 2200x800mm Max panel thickness 40mm 8 cylinders diameter 100mm Stroke 150mm Pressure 160T Pressure pressure 6 kg/cm² Heating 13kW Total power 17.3kW 380V, 35Amp Ncodjwnhicjpfx Adwjl Dimensions: 3900x1800xH2100mm, weight 5900kg - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 52850199 - Main motor power [kW]: 17.3 - Max. workpiece length [mm]: 2200 - Max. workpiece width [mm]: 800 - Max. workpiece height [mm]: 40 - Number of cylinders [pcs.]: 8 - Cylinder diameter [mm]: 100 - Total working pressure [Ton]: 160 - Working pressure [kg/cm²]: 6 - Heating boiler present: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Imprinting Unit Numbering- & Perforation Unit Heidelberg PM / SM 52 N&P Eindruckwerk mit Nummerier- & Perforiereinrichtung / Imprinting Unit Numbering- & Perforation Unit Heidelberg PM / SM 52 N&P Year 2001 - SN. 361748 Eindruckwerk / Imprinting Unit Nsdpfxjx Uz Tzj Adwocl Nummerierwelle mit 4 Sitzringen / Numbering shaft with 4 mounting rings 2 Perforierarme / 2 Perforating arm 2 Nummerierwerke / 2 Numbering boxes 1 Schaltkurve links und rechts / 1 cam left and right Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Membrane Press - ORMA PM, CE Working dimensions: 2400 x 1000 mm Nedpfxjxvzaho Adwjcl Pressing force: 200 t Heating plates: Yes Double membrane: 1 Principle: Overpressure system Total power: 52 kW Overall dimensions: 3800 x 2000 mm

Condition: excellent (used), Year of construction: 1965, table load: 60,000 kg, table width: 3,250 mm, total width: 3,250 mm, Indexing dividing setting: 1e stage full rotation setting 5 Gr 2e stage full rotation (fine) 30 " Turning rotation setting: 1e stage 1 - 48 Rpm 2e stage 0,27 - 11 Rpm   V-Axis movement setting: 1e stage 10 mm 2e stage (fine) 0,02 mm Scraped guide way 1 size: 300 x 85 mm  Scraped guide way 2 size: 225 x 85 mm Scraped guideway 3 size: 250 x 85 mm Table Ø: 3250mm Table load: 60 T Movement V-axis: 1800mm Ncsdpfex S Ihaex Adwel Rotation B-Axis: 360000° Rotation speed B-Axis:48Omw/min. Movement speed V-axis:1600mm/min. Length: 6900mm Width: 3500mm Height: 1400mm Weight: 25000kg

Condition: not inspected (used), functionality: unexamined, The pad printing machine of the PM-268 ES series is distinguished by its simple operation and precise mechanics, delivering brilliant print results – from single-color to multi-color printing. Nodpfx Adjyc Nn Uowocl Clear display _Contact pressure adjustable via magnetic adjustment Specifications Number of colors: 1 Maximum print area: 110 mm × 160 mm Maximum print diameter: ⌀50 mm Printing plate dimensions: 100 mm × 150 mm