Sc Nova Grup Srl

Condition: new,

Condition: good (used), Clamping device extension, workpiece clamping device, extension, guide stop -Manufacturer: IROX, clamping device increase -Type: Level 2 -Number: 3x tensioners available -Dimensions: 105/45/H160 mm -Weight: 1.2 kg Kneds Aayvaspfx Anujc

Condition: not inspected (used), Steering rollers, various designs, unused, approximately 400 pieces, 2 pallets. Knodpez R N Ngefx Anuoc

Condition: not inspected (used), Steering rollers, various designs, unused, approximately 650 pieces, 3 pallets. Kodsz R N Icspfx Anuenc

Condition: not inspected (used), Steering rollers, various designs, unused, approximately 600 pieces, 4 grid boxes. Kedpfxjz R N E Io Anusnc

Condition: not inspected (used), Current assets and work-in-progress consist of: installed parts, devices, control boxes, chassis, axle supports, cable pulleys, protective bars, retaining plates, base supports, transport units, deflection rollers, splash guards, axles, chains, cables, drum supports, struts, and other similar items. Knodpfxjz R Nxhs Anujc

Condition: not inspected (used), Aluminum profiles, rail profiles, length up to 1,545 mm, in stock on pallets, unused, approximately 20 tons. Knedpfx Anez R Nxbouec

Condition: used, Approx. 24 Tonnes of Invar Grade Ni36 Assorted Sizes (Specialised Nickel-Iron Alloy) Knsdpfxjz Rw S Is Anuec Grade Ni36 Invar of varying sizes.

Condition: new, Goetze 618tGFO DN15 Overflow Valve, Control Valve, NBR, Red Brass New spring-loaded overflow and control valve from Goetze in an angular design for protecting pumps from overload and for pressure regulation in industrial plants. Manufacturer: Goetze Series: 618 Type: 618tGFO-15-f/f-15/15 NBR Valve type: Overflow and control valve Design: Angular Spring cover: Gas-tight design Back pressure compensation: No Ventilation: Without Nominal size: DN 15 Connection inlet: G 1/2 inch internal thread Connection outlet: G 1/2 inch internal thread Connection standard: DIN EN ISO 228-1 Housing material: Red brass CC499K Internal parts: Brass / Red brass Spring material: Stainless steel 1.4310 Seal material: NBR Seal type: Elastomer flat seal Temperature range NBR: -30 to +130 °C Media: Gaseous and liquid media Installation dimension L: 29 mm Overall height H: 74 mm Wrench size SW: 28 mm Weight according to manufacturer: approx. 0.4 kg Condition: New Knodpsz Rv Ibofx Anujc Quantity: 2

Condition: new, Corona DP 405 multi-jet contact water meter with pulse transmitter New multi-jet turbine water meter in a fully dry-running design with an integrated contact transmitter for remote transmission of flow rates and for proportional control of pumps and motors. Manufacturer: Corona Knsdpjz Rv Hwsfx Anujc Type: DP 405 Device type: Multi-jet contact water meter Measuring principle: Multi-jet turbine meter Design: Fully dry-running with magnetic coupling Pulse transmitter: Encapsulated reed contact (normally open) Contact transmitter: Waterproof encapsulated, replaceable Cable length of contact transmitter: 2 m Maximum contact voltage: 24 V Maximum contact current: 0.2 A Nominal pressure: PN 16 Medium temperature range: +1 to +30 °C Temperature resistance: +1 to +90 °C Storage temperature: +1 to +55 °C Degree of protection: IP65 Totalizer: Rotatable Condition: New Quantity: 1

Condition: new, Bürkert Type 5282 A 20 NBR servo-controlled 2/2-way solenoid valve New servo-controlled diaphragm solenoid valve from Bürkert for controlling neutral gaseous and liquid media. Knjdpfxez Rv Hks Anuoc Manufacturer: Bürkert Type: 5282 Valve type: Servo-controlled 2/2-way diaphragm solenoid valve Mode of operation: A, closed in the rest position Nominal size: DN 20 Seal material: NBR (nitrile butadiene rubber) Suitable media: Neutral gases and liquids, for example, compressed air, water and hydraulic oil Medium temperature: 0 to +80 °C Actuation: Electromagnetic Duty cycle of solenoid coil: 100% Solenoid coil insulation class: H Voltage tolerance: ±10% Maximum ambient temperature: +55 °C Installation position: Any, preferably with the actuator facing upwards Condition: New Quantity: 1

Condition: used, Siemens MOBY I Read Head 6GT2003-1CA00 for Handheld Terminal STG I, used Used Siemens MOBY I read head for the mobile handheld terminal STG I, designed for industrial identification. Manufacturer: Siemens Model Series: MOBY I Article Number: 6GT2003-1CA00 Device Type: RFID Read Head Application: Handheld Terminal STG I Kjdoz N Hniepfx Anuonc Frequencies: 134 kHz / 1.81 MHz

Condition: used, Manufacturer: Siemens Model series: SITOP PSU300S Article number: 6EP1437-2BA20 Device type: Regulated power supply Input voltage: 3 AC 400–500 V Output voltage: DC 24 V Knedjz N Hmxepfx Anusc Output current: 40 A Rated output power: 960 W Condition: Used

Condition: used, Siemens SIMATIC OP 170B Operator Panel 6AV6542-0BB15-2AX0, used Used Siemens SIMATIC OP 170B operator panel with Blue-Mode STN display and button-based operation for visualizing and controlling industrial machines. Manufacturer: Siemens Series: SIMATIC HMI Knodpfx Aoz N Hlnsnujc Model: OP 170B Article number: 6AV6542-0BB15-2AX0 Device type: Operator Panel Display: Blue-Mode STN Operation: Buttons Communication interface: MPI / PROFIBUS DP Additional interface: Printer interface Memory card slot: CompactFlash Programming software: ProTool/Lite from V5.2 SP2 Condition: Used Quantity: 1

Condition: used, Siemens MOBY ASM 450 PROFIBUS DP Connection Module 6GT2002-0EB00, used Used Siemens MOBY connection module ASM 450 for connecting industrial identification systems to PROFIBUS DP. Manufacturer: Siemens Series: MOBY Model: ASM 450 Kodpfx Aoz N Hlbonusnc Article number: 6GT2002-0EB00 Device type: Connection module / Interface module Communication interface: PROFIBUS DP Supply voltage: 24 V DC Digital inputs: 2 Digital outputs: 2 Dimensions: 134 × 110 × 55 mm Condition: Used Quantity: 2

Condition: used, Used Siemens SIMATIC pneumatic interface EM 148-P for controlling a Festo CPV-14 valve manifold within the decentralized peripheral system ET 200X. Manufacturer: Siemens Series: SIMATIC DP / ET 200X Model: EM 148-P Article number: 6ES7148-1EH11-0XA0 Device type: Pneumatic interface Digital outputs: 16 DO Pneumatic Valve manifold connection: Festo CPV-14 Kedoz N Hk Repfx Anuenc Power dissipation: Typical 9 W Operating pressure: 3–8 bar Condition: Used Quantity: 1

Condition: used, Used HBM CLIP AE501 carrier frequency measuring amplifier, 4.8 kHz. Used HBM CLIP AE501 carrier frequency measuring amplifier for processing measurement signals from inductive half-bridge and full-bridge sensors. Manufacturer: Hottinger Baldwin Messtechnik (HBM) Series: CLIP Type: AE501 Device type: Carrier frequency measuring amplifier Carrier frequency: 4.8 kHz Measurement range: 8–400 mV/V Sensor connection: Inductive half-bridge and full-bridge Connection technology: 5-wire technology for half-bridges, 6-wire technology for full-bridges Output signal: ±10 V Knodpfxez N Hkwe Anusc Supply voltage: 15–30 V DC Power consumption: Max. 4 W Mounting: DIN rail Condition: Used Quantity: 12

Condition: used, Kracht ASR 20 B&R 4P3040.01-K17 Power Panel, operator panel, used Used Kracht ASR 20 operator and control panel based on a B&R Power Panel for industrial machine and system control. System manufacturer: Kracht Panel manufacturer: B&R Bernecker & Rainer System designation: ASR 20 Panel type: 4P3040.01-K17 Device type: Operator and control panel / Power Panel Knodpfx Ajz N Hkdjnuoc Supply voltage: 24 V DC Application area: Industrial machine operation and control Condition: Used Quantity: 1

Condition: used, D+P FLC300.3-D+P Industrial Electronics, Used Used industrial component from Dosier- und Prüftechnik GmbH, model FLC300.3-D+P. Manufacturer: Dosier- und Prüftechnik GmbH Model: FLC300.3-D+P Condition: Used Knedjz N Hhpspfx Anuoc Operating voltage: 24 V DC Function: Control, monitoring, and testing technology for industrial applications Quantity: 2

Condition: used, D+P Dosing and Testing Technology 05-755-011, used industrial spare part Knjdpfxez N Hgxs Anusc Used industrial spare part from Dosing and Testing Technology GmbH. Manufacturer: Dosing and Testing Technology GmbH Part number: 05-755-011 Condition: Used Quantity: 3

Condition: used, Used Siemens SIMATIC MP 277 Multi Panel with a 10.4-inch TFT color display and a foil keypad for operating and visualizing industrial plants. Manufacturer: Siemens Series: SIMATIC HMI Model: MP 277 10" Key Knjdpfx Anez N Hgfeuoc Article number: 6AV6643-0DD01-1AX1 Display: 10.4" TFT color display Resolution: 640 × 480 pixels Colors: 65,536 Operation: Foil keypad Project memory: 6 MB Supply voltage: 24 V DC Interfaces: RS422/RS485, Ethernet, USB Projecting software: WinCC flexible 2005 Standard SP1 Condition: Used

Condition: used, Used Siemens SITOP modular power supply unit for regulated 24 V DC power supply of industrial equipment. Manufacturer: Siemens Series: SITOP modular Article number: 6EP1436-3BA00 Device type: Regulated power supply Input voltage: 3 AC 400–500 V Output voltage: DC 24 V Output current: 20 A Nominal output power: 480 W Condition: Used Kjdpfoz N Hf Iox Anusnc

Year of construction: 2020, condition: new, functionality: fully functional, Available in multiple units. Kedpfx Aez I S Econujnc

Condition: new, functionality: fully functional, Equipment: documentation/manual, FOLIE DEKORACYJNE PVC 3D DO FRONTÓW MEBLOWYCH I MDF – 50 ROLEK Na sprzedaż zapas magazynowy folii dekoracyjnych PVC 3D producentów RENOLIT, BONLEX, ALKOREN i EUROVINYL. Oferta obejmuje 50 rolek o szacunkowej łącznej powierzchni około 14 000–15 000 m². Folie przeznaczone do oklejania frontów meblowych i kuchennych, płyt MDF oraz elementów profilowanych, z wykorzystaniem technologii prasowania membranowego lub próżniowego. Przydatność konkretnego dekoru do danego procesu należy potwierdzić na podstawie jego specyfikacji. W zestawie znajdują się różne kolory i dekory, w wykończeniu matowym, supermatowym oraz w wysokim połysku. Oferta skierowana do producentów mebli i frontów MDF, zakładów stolarskich oraz dystrybutorów materiałów meblowych. ZESTAWIENIE DOSTĘPNYCH FOLII • RENOLIT Graphite Supermatt Classic 16 rolek – szacunkowa powierzchnia 5 301 m². • RENOLIT Conifer Green Supermatt PF (V1238) 10 rolek – szacunkowa powierzchnia 3 278 m². • BONLEX Grigio Scuro HG 8 rolek – szacunkowa powierzchnia 2 160 m². • BONLEX Canadian Ivory 2 rolki – szacunkowa powierzchnia 576 m². • RENOLIT Reed Green Premier Matt Protected 1 rolka – szacunkowa powierzchnia 256 m². • RENOLIT Tobacco Ash SC Premier 1 rolka – powierzchnia do potwierdzenia. • ALKOREN Peperoncino Rosso HG 1 rolka – szacunkowa powierzchnia 270 m². • EUROVINYL HFL 4090 1 rolka – szacunkowa powierzchnia 227 m². • Pozostałe folie – różne niezidentyfikowane dekory 10 rolek – szacunkowa powierzchnia około 2 300–2 800 m². Trzy największe partie: Graphite Supermatt Classic, Conifer Green Supermatt PF oraz Grigio Scuro HG obejmują łącznie 34 rolki. CENA I WARUNKI SPRZEDAŻY Cena ofertowa całego zapasu: 34 000 EUR netto. Preferowana sprzedaż wszystkich 50 rolek jednemu nabywcy. Zakup wybranych większych partii możliwy po indywidualnym uzgodnieniu. Cena pakietowa dotyczy wyłącznie zakupu i odbioru całości; ceny poszczególnych dekorów ustalane są oddzielnie. Zapas dostępny do szybkiego odbioru. Podane powierzchnie są orientacyjne. Dokładne ilości oraz dostępność poszczególnych dekorów wymagają potwierdzenia przed zakupem. Na życzenie udostępnimy dodatkowe zdjęcia rolek i etykiet oraz szczegółowe zestawienie dostępnych folii. Kodsz I Rmropfx Anusnc Numer referencyjny oferty: PVC-3D-50.

Condition: new, 40 leather cases, each containing 10 knives 10-piece professional knife set – stainless steel – new/unused For sale is a high-quality 10-piece knife set including a sturdy storage and transport case. The knives are new and unused, some still in their original protective wrapping. Ideal for the catering industry, hotels, butcher shops, catering services, commercial kitchens, or private households. Set consists of: * Salmon/ham knife 25 cm * Slicing knife 24 cm * Chef’s knife 23.5 cm * Bread knife 22.5 cm * Boning knife 16.5 cm * Cleaver 17.5 cm * Paring knife 9 cm * Meat fork 18.5 cm * Sharpening steel 23 cm * High-quality transport case Stainless steel blades with robust metal handles. According to the manufacturer, the knives are individually sharpened and quality-checked by hand. Several sets available. Therefore, also of interest to dealers. Ksdez Iv Tkepfx Anuonc The goods come from a bankruptcy; we are certain that the knives were not manufactured in Switzerland, hence the future price.