TechnoKompetenz Cramer

Year of construction: 1988, condition: used, Offered is a high-frequency welding press with film feed. Equipped with: press unit, hydraulic power unit with electric motor, control panel with switches and indicator lights, worktable with film guide, side-mounted roll holders, film unwinding unit and separate electrical cabinet. Inspection possible by appointment. Blsdpfj Adt Eiox Anyjp

Year of construction: 2007, operating hours: 500 h, condition: refurbished (used), functionality: fully functional, length of welding knife: 1,000 mm, welding current at 100% duty cycle: 32 A, welding power (max.): 21 kVA, width of welding knife: 10 mm, machine/vehicle number: 1400, Equipment: type plate available, High frequency suspended welding machine, 12KW, double adjustable electrode 10x1000mm. Revised according to current EC legislation, plexiglass protection, 12 months warranty Blsdpfx Ane Abcmqeyjp

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 14061094-02, workpiece weight (max.): 2,200 kg, total width: 4,480 mm, total length: 4,450 mm, total height: 1,600 mm, air pressure: 6 bar, We offer this used KMW Engineering A4PH-3228-0,2 4-head welding machine of PVC window frames. Used in single/morning-shift production only. First owner. In 2022 main mechanical parts were replaced by KMW. Cost 22000€ Machine is disconnected and stored in fabrication hall. I can send video of operation when it was part of fabrication process. Year of construction: 2006 (2022 reconstructuction) Supply voltage: 400 V Operating power: 11 kW Frequency: 50 Hz If you have any questions or need more information, feel free to send us a message or give us a call. Blodpe Aa Rm Aofx Anyjp

Condition: excellent (used), For sale: Professional KLN Ultraschall / MECASONIC OMEGA 3 MCA ultrasonic welding machine – an industrial system for precision joining of plastics. The device is designed for use in: - Serial production - Automotive industry - Electronics and medical sectors - Welding plastic components (e.g. housings, blisters) ⚙️ Specification: Manufacturer: KLN Ultraschall (Crest Group) / MECASONIC Model: OMEGA 3 MCA Bedpfsz Smn Nox Anyolp Type: Ultrasonic welding system Year of tooling production: 2011 Control: MCA digital control panel Cycle counter: approx. 23,000 Two-hand safety start system (operator safety) Industrial power supply 📦 Included in the set: - Complete welding unit - MECASONIC MCA controller - Work table with tooling (mould / fixture – "Blister") - Pneumatic installation (visible in the photos) - Cabling 📊 Condition: - Used device - Visually in very good condition - Normal signs of use (as seen in the photos) - Machine powers up – control panel operates - No complete production testing performed 📄 Additional information: - Cycle counter visible on display - Safety instructions (DE) on the housing - Robust industrial construction ✅ Advantages: - High welding precision - Fast process (ultrasonic) - Reliable industrial technology - Ready for integration or standalone operation - Reputable manufacturers (KLN / MECASONIC) 🚚 Shipping: - Pallet shipping - Personal collection possible - International shipping available

Year of construction: 2013, operating hours: 2,000 h, condition: used, functionality: fully functional, The Branson 2000XDT Ultrasonic Welder is a unit providing up to 2500W of power. It is designed for precision and efficiency in various plastic processing industries. With the reputable Branson brand backing it, this ultrasonic welder is perfect for sealing and welding plastic products with ease. This equipment offers reliable and high-quality results for a wide range of plastic materials. Trust in the Branson 2000XDT Ultrasonic Welder for all your plastic welding needs. We have added sound sound proof housing (white box on photos with internal sound absorbing foam), so workers are not exposed to high frequencies and high sound levels. They can work without hearing protection. Access to work area is possible through transparent Plexiglass door. Bljdsz Rm Tzspfx Anyop Dimensions of sonotrode are 200 x 125 x 115 mm L x W x H and allow for large product welding. Sonotrode is flat on the bottom. Number of nests are also part of the offer. Included sound proof housing for quiet operation. No need for additional hearing protection.

Year of construction: 2013, condition: good (used), Machine type: M-512Hi Overall Dimensions (H x W x D): 2200 x 2330 x 1600 mm Upper Fixture (oscillating Head, W x D): 762 x 356 mm Lifting table / lower fixture (W x D): 1020 x 540 mm Cut Out in the Table (W x D): 660 x 250 mm Clearance between the Lift Table and the VIB Head: 710 mm (alternative: 610 mm) Table Stroke: 485 mm Bledjz E R Rfepfx Anysp Min. Tooling Height: 235 mm (alternative: 135 mm) Upper fixture weight: 25 - 35 kg Max. Welding area: 200 cm² Clamp force (max): 18 kN Drive of Lift table: Hydraulic unit Weight of the machine (approx., depends on options): 4000 kg Frequency: 240 Hz Max. upper tool weight: 35kg Max. weld area: 200 cm² (PP)

Year of construction: 2017, condition: excellent (used), functionality: fully functional, MACHINE FOR THE PRODUCTION OF ROLL BAGS, AMUTEC TSA ROLLER 1380 Bsdpfszzd S Rox Anyjlp Minimum/maximum material width: 300/1360 mm Minimum bag length: 50 mm Minimum/maximum thickness: 2×10 / 4×75 μm Minimum/maximum width of finished rolls: 100/420 mm Maximum diameter of finished rolls: 120 mm Folding triangles Conveyor belt Photocell for printed materials Control panel with touchscreen Labeling machine Year: 2017

Year of construction: 2015, condition: used, Welding System Manufacturer: TRUMPF Type: TruHeat HF 5010 Year of manufacture: 2015 Technical details: Input power: 12.5 kVA Power factor: 0.95 Rated power: 10 kW Output current: 560 A (RMS) Output voltage: 1500 V (RMS) Additional information: In our assessment, the machine is in mint condition and can be inspected under power by appointment. - incl. various accessories Accessories, tools, and clamping devices shown are included in the scope of delivery Bjdpfxezq Hkns Anyslp only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, Omega 130 folder-gluer - 4- 6- corner - ALLPRO 130 (2016 model) - Camera at the feeder to monitor the entry to the delivery section - Vacuum feeder - Servo-driven feeder - Left and right side-register sections - Remote control - Motorized transport belts Bledpfezlqwzjx Anyop - Motorized upper carriers for heavy materials - Electronic servo system for 4- and 6-corner boxes - Pneumatic aligner for micro-flute crash-lock bottom boxes - eWON Flexy for OPC UA data sharing - Safety pull-cords - LAMBERTONI hot-melt gluing system (2 guns) + side disc with cold glue pot - Option to install a ZATOR cold-glue system (4 guns) without pump and encoder

Year of construction: 2020, condition: ready for operation (used), A Schirmacher high-frequency sliding-table welding machine is available. Table dimensions X/Y: 750mm/550mm, max. pressing force: 20kN, generator output: 10kW, operating frequency: 27.12MHz, control system: Siemens. Documentation available. An on-site inspection is possible. Bledpjzh Niusfx Anyjp

Year of construction: 2009, condition: excellent (used), functionality: fully functional, machine/vehicle number: 579-130-09, Printed with 1S1C by Meca Tecno srl, Italy. Bsdpjzfgigefx Anyjlp The machine can be tested. In very good condition. Regularly maintained. Please contact us for more information.

Year of construction: 2007, condition: used, Welding Unit Manufacturer: KLN Ultraschall Model: HE-ANLAGE ADVANCE Year of manufacture: 2007 dimensions 1.900 x 2.131 x 3.023 ,, weight of the machine ca. ca. 2.200 kg In our assessment, the heating element welding machine is in good used Bsdezbvnxjpfx Anyjlp condition. Technical Specifications: Compressed Air: - Max. operating pressure: 6 bar - Compressed air consumption: 0.2 Nm³/cycle at 5 bar Heating Mirror: - 2x12 WALTOW heating cartridges, Ø12.5 x 400 mm, 1000 Watts, 230 Volts - 2x PT100 thermocouples - Heat-up time to 350°C: approx. 50 min Vacuum Pump: - BECKER vacuum pump, Model VT 4.16, 550 Watts Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Blodpfx Ansyqr Sxeyop

Condition: good (used), functionality: fully functional, Ultrasonic welding unit BRANSON, model 8.200 Blsdsylpqbjpfx Anysp

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) Bedpfsykvdlox Anyelp - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Year of construction: 2025, condition: new, functionality: fully functional, High frequency generator Schirmacher HS25000 The HF generator is used to generate a high-frequency electromagnetic field, which in a connected HF production device can be used to - Heat and weld thermoplastic plastics, - Dry paper products, textiles, wood and similar materials, - Heat plastic granulates, rubber and other materials. Technical data Operating frequency: 27,12 MHz Output power: 25 kW Power supply: 3 x 400V, 50Hz, Rated power 46 kVA Control: Generator: SPS Siemens S7 / Control electronics: SE68 Triode: RS3026 CL, alternatively ITL 12-1 Anode voltage: Full load 9,1kV, no load 10,4 kV Anode current: Full load 3.800 mA, no load 800 mA dimensions (WxDxH): 1.200 x 1.200 x 2.000mm Commerical infromation Condition: new machine, from delivery stock – zero operating hours Manufacturer: Heinz Schirmacher GmbH, Trittau Availability: Available from stock, more than one unit in inventory Warranty: Available upon request Blsdpfxjx U Trps Anysp Machine highlights Fast commissioning through modular design – flexible integration into various production processes and adaptation to different tools. Highly precise control – exact power delivery and consistently high welding quality. Highly dynamic HF regulation prevents extremely rapid flashovers in the welding process. Electrode protection – integrated into the generator to safeguard both machine and tool. Automation-ready – suitable for use in automated manufacturing processes with the capability to integrate into existing systems. Visits possible by arrangement.

Condition: as good as new (ex-display), PFAFF 8320 - 111/101 long-arm version with table Bsdpfx Aoxa D Hrjnyslp

Condition: used, Year of construction: 2013, Ulltraschall stanz + Siegelsystem Hermann MPW BT1200 35 KHZ 1200 W Bj.2013 Price: 9.900 € contact: Mr. Rainer Eckerle Bledpfxswv T H As Anysp

Year of construction: 2013, condition: excellent (used), Ultrasonic welding system Manufacturer: KLN Stock number: Year of manufacture: 2013 or 2009 Type: PXO number P600031440 MXO number M60413293 Equipment: the system consists of two stations, Individual sale possible Price: EUR 5,000 per station Price including 19% VAT: EUR 5,950 per station Blsdpfx Aevxppajnyop

Year of construction: 2015, condition: excellent (used), Mecasonic MCS2 CAB ultrasonic welding system - Very good condition Bsdpfxovvw Eko Anyolp - Year of manufacture: 2015 - 3 units available - CE declaration of conformity given - Condition: Incoterms EXW CH-4528 Zuchwil - Loading options available

Year of construction: 2010, condition: good (used), functionality: fully functional, The Branson ultrasonic welder is used for joining plastic parts without the use of joining material. Frequency 20 kHz, power 1000-2000W, voltage 230 V AC, stroke 100 mm LxWxH: 400 x 500 x 1200 mm Bsdpfx Aovt Sc Ejnyslp

Year of construction: 2018, condition: ready for operation (used), Three almost identical CNC plastic pipe butt welding machines (mirror welding machines) Hürner are available. Years of construction: 2x 2016 and 1x 2018, working range OD: 40mm-160mm, power: 2.85kW, reduction inserts: 40/50/63/75/90/110/125/140, weight: approx. 80kg. Documentation available. On-site inspection is possible. Bedpfx Ajviv Azjnyelp

Year of construction: 2009, condition: ready for operation (used), Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Telsonic MPS-4, connected load: 4000W, length: 459mm, width: 854mm, height: 1315mm, weight: 130kg. With SICK C4000 safety light curtains, cabin and documentation. On-site inspection is possible. Bedpsuy T I Hefx Anyolp

Year of construction: 2010, condition: ready for operation (used), An ultrasonic welding system with two Telsonic TSP-3000-1P, cabin, generators and documentation is available. Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Siemens SIMATIC PANEL, length: 762mm, width: 854mm, height: 1316mm, weight: 130kg. On-site inspection is possible. Bodpfx Aouy T Ndsnyolp

Year of construction: 2014, condition: ready for operation (used), An ultrasonic welding system with nine Telsonic Ultrasonic, cabin, nine generators and documentation is available. Control system: Siemens SIMATIC PANEL. On-site inspection is possible. Blodpfx Ansuy T Nqjysp