Anton Ritter Industriedienstleistungen

Year of construction: 2018, condition: ready for operation (used), travel distance X-axis: 950 mm, travel distance Y-axis: 440 mm, overall weight: 3,900 kg, number of axes: 3, This 3-axis OKAMOTO ACC84 DX surface grinding machine was manufactured in 2018. It features a table size of 850 × 400 mm and a maximum workpiece weight of 700 kg. The grinding wheel dimensions are Ø355 × 38 × Ø127 mm, with a grinding wheel speed of 1,800 rpm. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO ACC84 DX machine we have for sale. Contact us for further details. • Working area: • Table size: 850 × 400 mm • Maximum workpiece weight: 700 kg Lsdpfx Aezn N E Njn Ijhi • Distance from table surface to spindle centre: 47.5–547.5 mm • Grinding unit: • Grinding wheel: Ø355 × 38 × Ø127 mm • Grinding wheel speed: 1,800 rpm • Automatic vertical feed: 0.001–0.03 mm per pass • Feeds and cycles: • Hydraulic longitudinal table feed • Hydraulic cross table feed • Automatic grinding cycles • Automatic vertical downfeed Additional equipment • Magnetic chuck, 800 × 400 mm • Coolant system (depending on machine configuration)

Year of construction: 2015, operating hours: 2,286 h, condition: ready for operation (used), travel distance X-axis: 780 mm, travel distance Y-axis: 450 mm, controller manufacturer: FANUC, controller model: Series 32i-MODEL B, overall weight: 5,000 kg, spindle motor power: 7,500 W, table length: 700 mm, table width: 400 mm, number of axes: 3, This 3-axis AMADA Techster 84 surface grinding machine was manufactured in 2015. It features an X-axis travel of approximately 780 mm and a Y-axis travel of approximately 450 mm. The machine is equipped with a powerful 7.5 kW spindle motor and a magnetic chuck size of 700 × 400 mm. If you are looking to get high-quality grinding capabilities, consider the AMADA Techster 84 machine we have for sale. Contact us for further details. • Control: FANUC Series 32i-Model B • Power Supply: 200 V • Power Supply Type: 3-Phase Ljdpfxezk I Afs An Ijhi • Frequency: 50 Hz • Power Consumption: 23 kVA • Full Load Current: 50 A • Spindle Motor: 7.5 kW (Reinforced) • Grinding Wheel Dimensions: Ø 355 × 38–50 × 127 mm • Distance from Spindle Center to Table: Approx. 500 mm • Magnetic Chuck Size: 700 × 400 mm • Magnetic Chuck Pole Pitch: 4 mm • LED Working Area Lighting • Oil-Cooled Grinding Spindle • Compressor Air-Cooled Spindle Cooling • Temperature Control Accuracy: Approx. ±0.1 K • Automatic Touch Probe • Highskip Feed / High Speed Skip • Ethernet (LAN) Interface • Extended Memory Control Module • FANUC Macro B • Programmable Timer for Automatic Start/Stop and Warm-Up • CE Declaration of Conformity • Band Filter System 450 (E3.1) • Coolant Tank Capacity: Approx. 450 L • Filter Fineness: Approx. 20 µm • Emulsion Mist Extraction System 1100 • IFMC Oil Mist Separator • Machine Demonstration Possible • Grinding Spindle Hours: Approx. 2,286 h • General overhaul including geometric overhaul. The machine has only operated for approximately 504 hours since the overhaul Additional Equipment • WinWop Programming Software for Windows • CGS (Complete Grinding Solutions) CAM Software • Profile Dressing Unit with TPA 100 R • Pre-Dressing Unit VPA 100 R with Motorized Diamond Wheel • Table-Mounted Straight Dresser • Diamond Dressing Arbor R100-40-0.15 CVD • Regrinding Package for Diamond Wheel (Techster 84–104) • 100 mm Diamond Wheel for Pre-Dressing Unit • 700 mm Stop Bar with Prism • MPM Automatic Wheel Balancing System • Grinding Wheel Flange for Techster 64/84 (Ø 355 mm) • Modified Grinding Wheel Guard • Operating Tool Kit (Keys and Extraction Arbor)

Year of construction: 2002, condition: ready for operation (used), travel distance X-axis: 250 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 60,000 rpm, number of axes: 5, This 5-axis KUGLER Micromaster MG2 was manufactured in 2002. It features an X-axis travel of 250 mm, Y-axis travel of 305 mm, and Z-axis travel of 200 mm. The machine is equipped with a high-speed Fischer Precise spindle, capable of speeds between 60,000 and 160,000 rpm, and a SERCOS real-time motion control interface. If you are looking to get high-quality grinding capabilities, consider the KUGLER Micromaster MG2 ultra-precision micro-grinder we have for sale. Contact us for further details. • Spindle speed range: 60,000-160,000 rpm • B-Axis: ±90° Lhodpfszk Eipjx An Iji • C-Axis: Integrated • 5-AXIS: 5-axis kinematics (X, Y, Z, B, C) • Oil tank: Approx. 450 l • Ultra-Precision Micro-Grinder • Year of manufacture: 2002 • Condition: Used • Spindle: Fischer Precise • Spindle controller: PCF310 • Coolant system: RumA oil-cartridge system • Fischer Precise high-speed spindle • PCF310 spindle controller • RumA oil-cartridge coolant system • SERCOS real-time motion control interface • Spindle overhauled in 2019 • Vacuum table / fixtures available on request

Year of construction: 2007, condition: ready for operation (used), travel distance X-axis: 1,120 mm, number of axes: 3, This 3-axis FAVRETTO MB100 surface grinding machine was manufactured in 2007. It features a work plane of 500 x 1000 mm, providing ample space for various grinding applications. If you are looking to get high-quality grinding capabilities, consider the FAVRETTO MB100 machine we have for sale. Contact us for further details. Lhjdpfezk D Tmjx An Iei

Condition: good (used), machine/vehicle number: 64 DX, Okamoto 64 DX surface grinder. Lodpfx Aezkwudjn Ishi

Year of construction: 2006, operating hours: 45,852 h, condition: ready for operation (used), travel distance X-axis: 380 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 280 mm, controller manufacturer: FANUC, controller model: Series 160i-MB, overall weight: 8,000 kg, total width: 1,765 mm, total height: 2,200 mm, spindle motor power: 9,000 W, product length (max.): 2,500 mm, spindle speed (max.): 6,000 rpm, number of axes: 5, This 5-axis Schneeberger Sirius HPM was manufactured in 2006. It features a powerful control unit, GE Fanuc Series 160i-MB, and operates with grinding oil. The machine is equipped with an Absolent A5 oil mist extraction system for enhanced performance. If you are looking to get high-quality grinding capabilities, consider the Schneeberger Sirius HPM surface grinding machine we have for sale. Contact us for further details. Lhodpfxozdt H Ns An Iji - Control Unit: GE Fanuc Series 160i-MB / Quinto 4- Operating Medium: Grinding oil- Automation: None / Without loader- Working Voltage: 3 x 400 VAC- Kind of Current: 3L + PE- Frequency: 50 Hz- Control Voltage: 230 VAC / 24 VDC- Rating: 48 kW / 41 kW- Rated Current: 83 A- Optional Equipment: Absolent A5 oil mist extraction system (visible mounted on top of the machine)- The spindle is present but needs to be repaired and is not currently running.- The frequency converter for the spindle is also not working.

Year of construction: 1989, condition: ready for operation (used), travel distance X-axis: 1,500 mm, number of axes: 3, This 3-axis ELB Surface Grinder was manufactured in 1989. It features a working area of 1,500 mm x 500 mm, ensuring ample space for various grinding tasks. If you are looking to get high-quality surface grinding capabilities, consider the ELB Surface Grinder we have for sale. Contact us for further details. Ljdpfszb Et Dox An Ijhi - Manufacturer: ELB- Working Area: 1,500 mm x 500 mm- Year of Manufacture: 1989- Condition: Very good / Fully functional

Year of construction: 1989, condition: ready for operation (used), travel distance X-axis: 1,200 mm, number of axes: 3, This 3-axis Reform Surface Grinder was manufactured in 1989. It features a working area of 1,200 mm x 500 mm, ensuring ample space for various grinding tasks. The machine is in very good condition and fully functional. If you are looking to get high-quality surface grinding capabilities, consider the Reform Surface Grinder we have for sale. Contact us for further details. Ledpfx Aszb Erajn Iehi - Manufacturer: Reform- Working Area: 1,200mm x 500mm- Year of Manufacture: 1989- Condition: Very good / Fully functional

Year of construction: 2008, condition: used, overall weight: 5,600 kg, total length: 3,500 mm, total width: 2,500 mm, total height: 2,000 mm, Machine Number: 209311Control System: LC Control with Touch PanelTravel Paths:X: 1000 mmY: 600 mmZ: approx. 700 mm distance table–spindle centerMagnetic Clamping Plate:1000 x 500 mm - Electro-PermanentTable Load Capacity: approx. 1000 kgSpindle: Power: 7.5 kW (optional 18 kW) - Speed ControlGrinding Wheel:400 x 60 (100) x 127 mmTable Speed: 2 – 60 m/minCross Feed: 2 – 60 mm/pulse - continuous up to 5 m/minEquipment:Belt Filter System Coolant SystemPartial Enclosure Dressing UnitElectrical Connection:400 V / 50 Hz approx. 100 A Lhjdpfsy S Niljx An Ioi Dimensions (LxWxH) approx.: 3500 x 2500 x 2000 mm Grinding length: 1,000 mm Grinding width: 700 - mm Weight approx.: 5,600 kg Grinding height: 600 - mm Year of construction: 2,008 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Year of construction: 2010, condition: ready for operation (used), travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK, overall weight: 7,700 kg, spindle speed (max.): 2,600 rpm, table load: 1,500 kg, number of axes: 3, This 3-axis ABA ECOLINE 1507 surface grinding machine was manufactured in 2010. It features a maximum grinding length of 1500 mm and a grinding width of 800 mm, with a robust table load capacity of 1500 kg. The machine is equipped with a Siemens SINUMERIK control unit and offers impressive feed speeds of up to 60,000 mm/min for the worktable. If you are looking to get high-quality grinding capabilities, consider the ABA ECOLINE 1507 machine we have for sale. Contact us for further details. • Max. grinding length: 1500 mm • Max. grinding width: 800 mm • Distance table–spindle center: 700 mm • Tool holder: 1x grinding wheel holder • Max. feed speed grinding spindle: 2600 mm/min • Max. feed speed worktable: 60,000 mm/min • Voltage: 3 x 400 V • Total power: 90 kVA Additional equipment • Magnetic table (included) • Paper band filter BF200 (not included) • Mechanical extraction LTA (not included) Ljdpfx Aney N Uprj Ishi • Note: As stated, no accessories are included except for the magnetic table.

Year of construction: 2003, condition: ready for operation (used), travel distance X-axis: 600 mm, travel distance Y-axis: 300 mm, overall weight: 2,000 kg, table load: 300 kg, number of axes: 2, Surface grinding machine manufactured in 2003. This DEGEN FS-S3060 features an X-axis travel of 600 mm and a Y-axis travel of 300 mm. It has a table size of 600 × 300 mm and a maximum load capacity of 300 kg. If you are looking to get high-quality grinding capabilities, consider the DEGEN FS-S3060 machine we have for sale. Contact us for further details. Lsdpfxjy I U Hbe An Ijhi • Table size: 600 × 300 mm

Year of construction: 2013, condition: ready for operation (used), travel distance X-axis: 550 mm, overall weight: 11,000 kg, total height: 2,500 mm, table load: 1,200 kg, number of axes: 2, This AMADA MEISTER G3 surface grinding machine was manufactured in 2013 and is a robust solution for precision surface grinding applications. The machine is currently not in working condition due to an electronic/control issue. The FANUC controller was replaced; however, the machine did not return to operation after the replacement. A repair was proposed by the manufacturer’s service at an estimated cost of €15,000–€20,000, which was not carried out. As a result, the machine has been out of service and switched off for several years. Please contact us for further information. Machine Benefits Technical Machine Benefits • Suitable for heavy-duty operations. Extra Information The machine is currently not under power Lsdpsyz Scgefx An Ijhi Dimensions Machine Depth 6400 mm

Condition: used, Year of construction: 1995, functionality: fully functional, Drum Grinding and Polishing Unit Manufacturer: UHLIG, Type UB 22 Year: 1995 Technical Data: Make: Werner Uhlig Model: UB 22 Year of manufacture: 1995 Drive: Worm gear with motor Rotational speed: 5.6 – 54 l/min Shaft diameter: 25 mm, max. torque: 34 Nm Motor power: 0.25 kW Dimensions: approx. 1.00 x 0.90 x 1.20 m Lodoyw Rhmopfx An Iohi Weight: approx. kg (not specified) Equipment: - Control with frequency inverter - 2 single-chamber drums, approx. 200 mm wide, diameter 260 mm - Infinitely variable drum speed - Fresh water rubber hose - Waste water drain connection All details are subject to change without notice. A demonstration under power is possible at any time in our exhibition hall.

Year of construction: 2001, condition: ready for operation (used), travel distance X-axis: 530 mm, travel distance Y-axis: 175 mm, overall weight: 1,250 kg, total height: 2,129 mm, spindle motor power: 1,500 W, product length (max.): 1,940 mm, table load: 120 kg, table width: 1,317 mm, number of axes: 3, This 3s OKAMOTO ACC 450 DXA was manufactured in 2001. It features a grindable surface of 450 × 150 mm and a longitudinal travel of 530 mm, making it suitable for various grinding applications. With a maximum load capacity of 120 kg on the table, this machine offers robust performance. Consider the opportunity to buy this OKAMOTO ACC 450 DXA surface grinding machine. Contact us for further details. Ledpeyiffgefx An Iehi • Grinding table • Grindable surface: 450 × 150 mm • Distance spindle–table: 60–510 mm • Max load on table: 120 kg • Wheel and spindle • Wheel diameter: 205 mm • Wheel peripheral speed: 2,400 m/min • Spindle motor power: 1.5 kW / 2P • Motors • Hydraulic pump motor: 0.75 kW / 4P • Cross feed motor: 0.75 kW / 3P • Headstock up/down motor: 0.4 kW

Year of construction: 2000, condition: ready for operation (used), overall weight: 8,100 kg, number of axes: 3, This 3-axis ROSA ERMANDO STEEL 11.7 CN was manufactured in 2000. It features an ECS 2401 control system, a grindable size of 1,000 x 750 mm, and a grinding height of 600 mm. The machine can handle a table load up to 1,400 Kg and offers a longitudinal speed of 1–38 m/min. Consider the opportunity to buy this ROSA ERMANDO STEEL 11.7 CN surface grinding machine. Contact us for more information about this machine. • Grindable size: 1,000 x 750 mm • Cross travel: 750 mm • Longitudinal travel: 1,000 mm • Grinding height: 600 mm • Longitudinal speed: 1–38 m/min • Usable table surface: 1,100 x 500 mm • Permissible table load: 1,400 kg • Wheel dimensions: Ø 400 x 30 mm Lhjdpfoygl Hzjx An Ioi • Rotation speed: 1,450 rpm

Year of construction: 2018, condition: ready for operation (used), overall weight: 1,900 kg, total height: 1,900 mm, spindle motor power: 3,700 W, product length (max.): 1,950 mm, number of axes: 3, This 3-axis Proth PSGS 3060 BH / S1 surface grinding machine was manufactured in 2018. It features a table size of 300 × 600 mm and an electromagnetic chuck of the same dimensions. The grinding wheel measures 355 × 38 × 127 mm. Powered by a 3.7 kW spindle motor, this robust machine weighs approximately 1,900 kg. Consider the opportunity to buy this Proth PSGS 3060 BH / S1 surface grinding machine. Contact us for more information. • Table size (L × W): 300 × 600 mm Lhodpfx Aoydpn Rsn Iji • Electromagnetic chuck size (L × W × H): 300 × 600 × 74 mm • Grinding wheel size (Ø × width × bore): 355 × 38 × 127 mm Additional equipment • Optional: Tools • Optional: Clamping devices

Year of construction: 2008, condition: ready for operation (used), overall weight: 8,500 kg, total height: 2,470 mm, This Kent KGS 615 WMA1 surface grinding machine was manufactured in 2008. It features a robust table clamping area of 1500 x 600 mm, supporting a maximum load of 1300 kg. The machine is equipped with a powerful grinding spindle motor of 7.5 kW and a standard grinding wheel size of 355 x 50.8 x 127 mm. Consider the opportunity to buy this Kent KGS 615 WMA1 surface grinding machine. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits Lhedox D H Rhspfx An Iei • Table clamping area: 1500 x 600 mm / max. Table load (with magnet): 1300 kg longitudinal table travel: 1600 mm / table slots, number/width: 3/16 pcs/mm / table feed: 7-25 m/min • Vertical y distance from table to spindle center: 600 mm / vertical handwheel pitch: 0. 002 mm / feed per handwheel revolution: 0. 5 mm / automatic grinding feed ahd: 0. 005-0. 04 mm / automatic grinding feed wm1: 0. 002-0. 2 mm / vertical rapid traverse: 230 mm/min / transverse z travel: 660 mm / transverse feed per stroke: 0. 1-12 mm / transverse rapid traverse: 1250 mm/min / handwheel pitch: 0. 02 mm / feed per handwheel revolution: 5 mm • Grinding spindle motor: 7. 5 kw / grinding spindle speed: 1450 rpm • Grinding spindle motor: 7. 5 kw / grinding spindle speed: 1450 rpm Dimensions Machine Depth 6200 mm

Year of construction: 2020, condition: ready for operation (used), This 5-axis TGT V2 Maxima was manufactured in 2020 and is in mint condition. It features an ELBARON grinding mist extraction system and includes collets for diameters up to 20 mm. Extras include robot pallets, spare spindle, and sanding wheel packs. Consider the opportunity to buy this TGT V2 Maxima. Contact us for more information. Additional equipment • ELBARON grinding mist extraction system / Robot pallets / Collets for all common diameters up to 20 mm / Spare spindle / Sanding wheel packs and associated sanding wheels (Approx. 25 pieces) Machine Benefits Technical Machine Benefits • Operating time: 42000 minutes • Machine in mint condition / original spare spindle available, eliminating waiting times for spindle maintenance / full description and installation manual included Extra Information Spindle bearing: Front/rear: 7010 CTYN DU L P4 (NACHI)/ Lubricating grease: Kluberisoflex Super LDS 18 or NBU 25 (2.75 cc per bearing)/ Tightening torque: 58 Nm (front/rear)/ Concentricity: ≤ 0.002 mm/ Motor: LENZE 7.5 kW (10 hp), 4-pole/ Speed: 0-4500 rpm (frequency converter)/ Belt: PJ-12-1143L (GATES/FENNER)/ 2 Feed drive unit - X- and Z-axis/ Lsdex D Hi Rspfx An Ijhi Stroke: X-axis: 300 mm/ Z-axis: 680 mm/ Ball screw: Type: Fixed - Supported/ Bearing: 25TAB06DBFLP4 (NACHI, 62 Nm tightening torque)/ Ball screw spindle: BIF 3210A-5 (THK, Ø32 mm, pitch 10 mm)/ Motor: BECKHOFF AM8053-0G20 (11.4 Nm)/ Clutch: SFC 050 DA2-24B-20B (MIKI PULLEY)/ 3 Feed drive unit - Y-axis Stroke: 300 mm/ Ball screw: Bearing: 25TAB06DBFLP4 (NACHI, 62 Nm)/ Ball nut specification: BIF 3210-5 (THK)/ Motor: BECKHOFF AM8061-0GB1 (12.8 Nm)/ Coupling: SFC 060 DA2-20B-32B (MIKI PULLEY)/ / Rotatable table - axis A/ Bearing: 7014 CTYN DUL P4 (NACHI)/ Tightening torque: 255 Nm (front), 62 Nm (rear)/ Radial runout: ≤ 0.002 mm/ Grease: Kluberisoflex Super LDS 18 (3.6 cc per bearing)/ 5th Rotary Table Assembly - C Axis/ Bearing: YRT 100 (GOLDBULL)/ Assembly torque: 14 Nm (3-stage: 40% → 70% → 100%)/ Motor: ORION_230/140 (NIMBLE/UCAM), 238 Nm/ Encoder: RENISHAW/ main coolant system/ Flow rate: 85 L/min/ Tank volume: 400 liters/ Pump: RKM206 (Rajamane, 1.5 kW, 6-stage)/ Filtration: Paper filter Para mol N 334/150 (0.01 mm)/ lubrication layout/ Oil pump: ELU-2700 (Cenlub, 3 liters, 415V AC)/ Metering Cartridge: 320410-3 (LUBE)/ steady rest (manual)/ Vertical stroke: 3 mm/ Diameter range: Ø3-Ø22 mm/ Carriage travel: 120 mm

Year of construction: 1990, condition: excellent (used), O F F E R Subject to prior sale and errors excepted, we can offer you, without obligation, the following ex-stock: D E G E N Manual Cutting, Pointing, and Cylindrical Grinding Machine for Ejector Pins Model: T Year of manufacture: 1990 _____ Grinding carriage center height: approx. 200 mm Grinding wheel Ø x bore: 200 x 30 mm Grinding wheel speed: approx. rpm Grinding wheel drive power: approx. kW Workpiece headstock center height: 160 mm Workpiece headstock longitudinal adjustment: approx. 100 mm Workpiece headstock transverse adjustment: approx. 200 mm Workpiece headstock swiveling either side: approx. 2 x 30° Collet chuck capacity: 0.5 – 20 mm Weight: approx. 500 kg Accessories / Special equipment: • Workpiece headstock swiveling for pointing and deburring • Collet chuck with approx. 10 different collets Ledpfexzuuvox An Ijhi • Plexiglass safety guard for grinding wheel • Compact, free-standing on sturdy base • Optional cross-slide feed unit Condition: good to very good – under power, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further tool grinding machines available from stock – please enquire!

Condition: good (used), We are selling a used robotic grinding and polishing system. The system is in good used condition. The system includes: Lhsdpfx Anexby Sgo Isi - 1x YASKAWA MH20 industrial robot with NX100 controller - 2x belt grinding machines for grinding belts with a circumference of 3,500 mm - 2x polishing machines with oscillation and feed for polishing discs with a maximum diameter of 500 mm - 1x loading table for pallets with dimensions (LxW): 1,200 x 600 mm - 1x control cabinet If you have any questions, please do not hesitate to contact us!

Condition: good (used), Year of construction: 2019, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: RSPL 19, We are selling a robotic long grinding and polishing system. With this system, parts can be ground and polished. - 1 x tool changer on the robot side - 1 x servo-driven table for holding 9 parts, 360-degree rotation, 9 meters in length - 1 x polishing unit 450mm x 600mm, with liquid polishing compound feed Lsdpjwdnb Rofx An Iohi - 1 x brushing unit for brushes 400mm x 600mm, with liquid polishing compound feed - 1 x grinding unit for abrasive belts, length 1,000mm and 150mm width, with oil mist device consisting of three low-pressure spray guns - 3 x racks for tools - 1 x truing device for polishing wheels - 1 x measuring plate for polishing unit - 1 x control cabinet with PLC The robot and the linear axis have already been sold. If you have any further questions, please feel free to contact us!

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20250108, total height: 2,200 mm, overall weight: 700 kg, total length: 1,700 mm, total width: 1,300 mm, type of input current: three-phase, workpiece weight (max.): 75 kg, tank capacity: 120 l, usable tank capacity: 60 l, input voltage: 400 V, rotational speed (min.): 50 rpm, rotational speed (max.): 180 rpm, power: 4 kW (5.44 HP), input current: 16 A, warranty duration: 12 months, Equipment: rotational speed infinitely variable, The Turbo-Line 120 “S” model has a stainless steel ejection box mounted directly on the deburring machine. When the bowl lowers, the chips fall through a grid while the parts to be deburred remain on top. This Turbo-Line machine includes a 120-litre drum with vertical, straight sides and a separate base that rotates at an adjustable speed, normally between 115 and 135 rpm, but adjustable from 50 to 180 rpm. During operation, the grinding bodies inside the bowl create a uniform, spiral movement reminiscent of a twisted sausage. All areas of the machine that come into contact with the product, including the drum and the base, are coated with at least 26 mm of yellow polyurethane (PU) to ensure a long service life. The 120 liter work bowl can process up to 50-60 liters of product per batch, depending on the shape and size of the parts. The deburring parameters such as time and speed are individually controlled via a manual touch screen. Lhsdpfjvvu Snsx An Isi The addition of water and compound is done via a manually adjustable ball valve, which is included in the delivery. The finished products are discharged by tilting the bowl, a process controlled via the touch screen. The emptying speed is also adjustable via the frequency converter on the touch screen.

Condition: good (used), 1 x table grinding machine Sigg Polyfinish D 2 for small parts with 10 chambers. Accessories: 8 x plastic containers, 4 of which come complete with lid and holder. Lhodpfx Anjvpikxe Ioi Further details to follow. The machine can be viewed under power.

Condition: excellent (used), Table width: 63 cm. Table length: 250 cm. 2 knives. Engine: 4 kW. Ljdpjit T Dajfx An Iohi

Year of construction: 2021, condition: new, for grinding belts max. 80 mm x 2000 mm length with 3 kW drive power, for contact wheel Lhedpfx Anegxuhmo Ioi max. diameter 80 mm x 80 mm