S.E.M.I.G. d.o.o.

Condition: good (used), Year of construction: 1990, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Hnjloy Amztjhccqqok Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Condition: ready for operation (used), Year of construction: 1979, Immediately available ex-location: Hydraulic high-speed press Lauffer Type EPT 25 Hnjlhccqey Alkysqjk Year of manufacture: 1979 Inspected according to UVV Press force 25 t Stroke 160 mm Installation height 320 mm Throat depth 230 mm Table 500 x 360 mm Ram 250 x 210 mm Weight 2 t Drive power 7.5 kW Price: EUR 2,750 plus VAT, ex-location.

Condition: used, Double-column Hydraulic Press SCHÖN Type SH 25 Machine No. 2440 Year of manufacture: 1979 Press force: 25 tons Column spacing: 630 mm Lateral passage between columns: 120 mm Table area: 580 x 320 mm Ram area: 360 x 220 mm Clamping pin hole: Ø 40 mm Maximum ram stroke: 100 mm Maximum installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Hnolhsyz Dr Teccqqsk Power supply: 380 Volt, 50 Hz - Main cylinder overhauled in 2025 - SICK LUV 206 safety light curtain - Two-hand control - Stroke counter - Rapid stroke and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Press force regulation - Press time extension 1–10 s (pressure holding time) - No operating manual and no wiring diagrams Required space (L x W x H): 1450 x 1100 x 2200 mm Weight: 1200 kg In good condition

Condition: used, machine/vehicle number: 3218, functionality: fully functional, Boldrini PAO 1000 Hydraulic Dishing Press, 1,000 tonne capacity Hsljyztnwohccqqenk 6,000mm distance between frame 2x GH overhead travelling workpiece manipulation cranes with independently supported runway, each with 2x 16 tonne capacity hoists

Condition: used, Year of construction: 2014, machine/vehicle number: 101453, functionality: fully functional, power: 368.5 kW (501.02 HP), pressing force: 4,000 t, stroke length: 1,600 mm, operating speed: 200 mm/s, ram plate width: 1,900 mm, ram plate length: 1,900 mm, clearance between the columns: 6,500 mm, overall weight: 4,80,000 kg, Fagor JBe-4000-2.5x2.5-2013 4,000T Hydraulic Forming Press (2014) Hnslsyzr Hfohccqqok 0–4,000 tonnes variable ram pressure 1,900mm ram diameter 2,500 mm x 2,500 mm T slotted top platten 2,500 mm x 2,500 mm T slotted bottom platen 6,500 mm distance between side columns 1,600 mm length of ram stroke 200 mm/s ram speed 12 mm/s pressing speed 368.5 kW total electrical power 480 tonnes total weight of machine 2x overhead travelling workpiece manipulation cranes with independently supported runway, each with 2x 16 tonne capacity hoists Siemens programmable touch screen console for machine and cranes

Condition: good (used), Year of construction: 1978, Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 100 tons -Motor: 11 kW -Clamping table: 580 x 440 mm / Bore Ø 150 mm -Max. insertion height: 435 mm -Projection: 650 mm -Max. stroke: 150 mm Hnjlhjyzd I Ueccqqsk -Hole: Ø 50 mm -Dimensions: 1640/1300/H2650 mm -Weight: 4440 kg

Condition: excellent (used), Year of construction: 1965, functionality: fully functional, press force: max. 630 to. daylight: 320 mm width: 420 mm Hjlhcoyylhajcqqonk stroke: max. 310 mm weight: 3.700 Kg.

Condition: used, pressure 160 t Hslhccjyx Im Noqqenk distance between columns 1360 mm stroke 300 mm Distance table/ram, max. stroke up, adjustment up 620 mm table surface area 1300 x 900 mm table height over floor 950 mm side window 640 mm ram surface 1300 x 900 mm power requirement 45,0 kW weight 16,0 t Dimensions (WxDxH) 2,5 x 2,1 x 4,1 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, mechanical depth stop No foundation pit necessary

Condition: used, Year of construction: 1977, pressure 250 t distance between columns 1110 mm Hslhccqoyx Im Aoqenk stroke 250 mm Distance table/ram, max. stroke up, adjustment up 500 mm Table surface area 1100 x 900 mm Table height above floor 950 mm Side window 690 mm Ram surface 1100 x 900 mm Oil volume 730 l Power capacity 56,0 kW Dimensions (WxDxH) 2,3 x 1,55 x 3,96 m with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, depth stop No foundation pit necessary

Condition: used, Year of construction: 1985, pressure 40 t distance between columns 495 mm stroke 150 mm distance table/ram, max. stroke up, adjustment up 300 mm table surface area 490 x 400 mm hole in the table 50 mm table height over floor 950 mm Hnslhcceyx Imvjqqok side window 155 mm ram surface 150 mm speed down 480 mm/s speed up 480 mm/s working speed 20 mm/s oil volume 115 l power requirement 7,5 kW weight 2,2 t dimensions (WxDxH) 1,35 x 1,1 x 2,2 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oil-hydraulic drive, upper and lower stroke limitation, mechanical depth stop, two-hand and foot operation No foundation pit necessary

Condition: used, Year of construction: 1987, pressure 2000 t distance between columns 975 mm stroke 400 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1015 x 1050 mm table height over floor 800 mm capacity of ejector in table 6,3 t ejector stroke in table 100 mm capacity of ejector in ram 65 t ejector stroke in ram 100 mm ram surface 975 x 1050 mm return capacity 150 t speed down 235 mm/s speed up 250 mm/s working speed 5 - 20 mm/s oil volume 4000 l height over floor 3,65 m height beneath floor 3,75 m Hsleyx Impshccqqenk power requirement 194,0 kW weight 105,0 t dimensions (WxDxH) 5,0 x 6,5 x 7,4 m Calibrating press with oil-hydraulic drive, hydraulic ejector in table and ram

Condition: used, Year of construction: 1980, pressure 250 t distance between columns 1125 mm stroke 250 mm distance table/ram, max. stroke up, adjustment up 800 mm table surface area 1100 x 900 mm pressure of drawing cushion in table 63 t stroke of drawing cushion in table 100 mm die cushion area 700 x 400 mm table height over floor 960 mm side window 700 mm ram surface 1080 x 900 mm oil volume 1000 l power requirement 35,0 kW weight 23,0 t Dimensions (WxDxH) 2,5 x 2,3 x 4,5 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick), hydraulic drawing cushion in table, cutting impact cushioning No foundation pit necessary kann ohne in Betrieb nehmen, mit in Betrieb nehmen in gegebenem Zustand oder alternativ mit neuer Steuerung Siemens S 7-1500 F angeboten werden can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F Helhcoyx Il Escqqonk

Condition: used, Year of construction: 1984, pressure 200 t distance between columns 1800 mm Hnolheyx Ilreccqqsk stroke 710 mm Distance table/ram, max. stroke up, adjustment up 1100 mm table surface area 1600 x 1300 mm pressure of drawing cushion in table 80 t stroke of drawing cushion in table 250 mm die cushion area 1400 x 1080 mm table height over floor 800 mm side window 800 mm ram surface 1660 x 1300 mm speed down 400 mm/s speed up 410 mm/s working speed 14,3 - 49,7 mm/s power requirement 38,0 + 13,0 kW weight 25,0 t Dimensions (WxDxH) 3,65 x 3,3 x 5,4 m height over floor 5,05 m height beneath floor 0,4 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick) on front and back, hydraulic drawing cushion in table (controllable), hydraulic cutting impact cushioning (in side frame), mechanical depth stop (motoric adjustable), mechanical ram interlocking, two-hand operation can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1988, pressure 160 t distance between columns 1600/1420 mm stroke 345 mm distance table/ram, max. stroke up, adjustment up 830 mm table surface area 1460 x 850 mm table height over floor 1100 mm side window 770 mm ram surface 1410 x 850 mm speed down 540 mm/s speed up 520 mm/s working speed 26 - 85 mm/s oil volume 2100 l power requirement 45,0 kW weight 23,0 t Hnolhcceyx Ilfsqqek dimensions (WxDxH) 4,0 x 2,3 x 4,9 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, ram interlocking can be offered without putting into operation (no electrical cabinet) or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1980, pressure 400 t distance between columns 3250 mm distance table/ram, max. stroke up, adjustment up 1000 mm Hslsyx Ik Ushccqqsnk stroke 800 mm table surface area 3250 x 1400 mm table height over floor 1250 mm die cushion capacity 170 t die cushion stroke 200 mm die cushion area 1800 x 1000 mm distance between cutting impact cushioning 2610 mm side window 800 mm ram surface 3250 x 1400 mm return capacity 51 t speed down 300 mm/s speed up 300 mm/s working speed 16 - 33 mm/s quantity of oil 2900 l power requirement 100,0 kW weight 70,0 t Dimensions (WxDxH) 4,9 x 3,1 x 7,6 m with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick) on front and back, hydraulic drawing cushion in table (controllable), hydraulic cutting impact cushioning with motoric adjustable depth stop, hydraulic ram interlocking, two-hand operation as is where is, WITHOUT putting into operation / WITHOUT additional work, free loaded to truck

Condition: used, Year of construction: 1983, pressure 315 t distance between columns 1620 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1600 x 1100 mm pressure of drawing cushion in ram 20 t stroke of drawing cushion in ram 100 mm drawing cushion area in ram 300 x 300 mm side window 600 x 1100 mm table height over floor 750 mm ram surface 1600 x 1100 mm oil volume 1500 l power requirement 110,0 kW weight 35,0 t dimensions (WxDxH) 4,65 x 2,61 x 5,5 m height over floor 5,05 m height beneath floor 0,45 m permitted for manual loading according to the German Safety Regulations (UVV) Hjlhsyx Ikhsccqqjnk with oil-hydraulic drive, controllable dependent on pressure/time and way, NO drawing cushion in table, hydraulic drawing cushion in ram, hydraulic cutting impact cushioning, two-hand operation

Condition: used, Year of construction: 1985, pressure 320 t distance between columns 1530/1370 mm Holhccqsyx Ihtjqsnk stroke 320 mm distance table/ram, stroke up 830 mm table surface area 1500 x 650 mm die cushion pressure in table 12,5 t table height over floor 1100 mm side window 570 mm ram surface 1240 x 650 mm capacity of ejector in table 12,5 t speed down 450 mm/s speed up 440 mm/s working speed 63,6 mm/s oil volume 2100 l power requirement 2 x 45,0 kW weight 27,0 t dimensions (WxDxH) 4,0 x 2,3 x 4,9 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table and ram, ram interlocking can be offered without putting into operation (no electrical cabinet) or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1988, pressure 160 t distance between columns 1340 mm stroke 300 mm Distance table/ram, max. stroke up, adjustment up 600 mm table surface area 1300 x 900 mm table height over floor 930 mm side window 600 mm ram surface 1300 x 900 mm speed down 367 mm/s Hnjlhccsyx Ihmjqqsk speed up 390 mm/s working speed 58 mm/s oil volume 800 l power requirement 30,0 kW weight 15,0 t Dimensions (WxDxH) 2,5 x 2,2 x 4,0 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure and way, hydraulic cutting impact cushioning, depth stop (motorized adjustment), two-hand operation No foundation pit necessary can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1988, Max. pressing force: 1,600 kN Main drive: 30 kW Speeds: Rapid down I: 290 mm/sec Rapid down II: 130 mm/sec Working down I: 39 mm/sec Working down II: 17 mm/sec Rapid up I: 290 mm/sec Rapid up II: 130 mm/sec Hjlhccqsyxqt Ssqjnk Alternatively, infinitely variable drive: Drive power: 37 kW Rapid down, variable: 360 mm/sec Working down, variable: 23–48 mm/sec Rapid up, variable: 360 mm/sec Ram stroke, max.: 150 mm Max. installation height: 450 mm Ram area: 700 × 700 mm Table area: 700 × 700 mm Table through-hole Ø: 180 / 150 mm Clear spacing between uprights (front): 750 mm Clear spacing between uprights (side): 250 mm Table height above floor: 850 mm Ram bore Ø H7: 60 mm T-slots in table and ram H12 (DIN 650): 22 mm T-slot arrangement: to be defined Machine footprint, approx.: 1,500 × 1,700 mm Machine height, approx.: 3,150 mm Machine weight, approx.: 14,000 kg

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, table width: 900 mm, total length: 3,000 mm, 100 ton press with pressing area 900 x 3000 mm, equipped with REXROTH HYAG31/2000 hydraulic press unit. Year of manufacture: 2001. The press was completely overhauled in 2025 and fitted with BUSSE heating plates up to 120 degrees Celsius and a SIEMENS-RITTAL touchscreen control panel. After basic disassembly, the press has a weight of approx. 40 tons. Includes roller conveyor and lift table. Holhjyxp Uneccqqenk

Condition: used, Year of construction: 1962, Hydraulic press 160 t Holhccoyxnb Hsqqonk

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, pressing force: 1,600 t, table width: 2,800 mm, table length: 5,000 mm, Hydraulic Tryout Press Manufacturer: SCMB The machine offered here is a hydraulic tryout press. In 2014, this press underwent a comprehensive general overhaul in Germany, carried out by a specialized company. During this overhaul, the mechanics, electrics, and hydraulics were completely renewed and modernized. Only components from leading European manufacturers were used in the refurbishment. A particular highlight of this tryout press is that both the ram and the working table are equipped with drawing cushions. The working table is designed as a movable table. The ram can be stopped at any desired position and mechanically locked as required. Technical Data Manufacturer: MW/SCMB Model: PHD1600 T Press force (ram): 16,000 kN Stroke (max.): 1,200 mm Hsleyxhq Iehccqqonk Distance between ram and table: 2,350 mm Ram plate (dimensions): 5,000 × 2,800 mm Ram ejector force: 2,000 kN Ejector stroke (max.): 150 mm Ejector plate (dimensions): 3,700 × 1,300 mm Main motor power: 3 × 110 kW at 1,500 rpm Auxiliary motor power: n/a (1,500 rpm) Sliding table (dimensions): 5,000 × 2,800 mm Rapid approach speed: 300 mm/s Working speed (50% nominal force): 34 mm/s Working speed (100% nominal force): 17 mm/s Return speed: 300 mm/s Return force (gross): 1,660 kN Lower cushion force: 4 × 1,000 kN Lower cushion stroke (max.): 280 mm Lower cushion dimensions: 3,920 × 1,680 mm The above specifications are taken from the machine documentation. The seller assumes no liability for their completeness or accuracy. The actual technical data and functions of the machine are decisive. Tool making (Tryout / Spotting)

Condition: used, Year of construction: 2014, functionality: fully functional, pressing force: 2,000 t, table width: 2,900 mm, table length: 5,000 mm, Hydraulic Tryout Press Manufacturer: SCMB Type: PHT 2000 The machine offered is a hydraulic tryout press. In 2014, this press underwent a comprehensive general overhaul in Germany by a specialized company. During this process, the mechanics, electrics, and hydraulics were completely renewed and modernized. Only components from reputable European manufacturers were used for the overhaul. A special highlight of this tryout press is that both the ram and the bolster table are equipped with draw cushions. Heljyxhp Djhccqqonk The bolster table is designed as a movable table. The ram can be stopped and mechanically locked in any desired position as required. Technical details: - Pressure: 2000T with ram plate - Table size: 5000 mm x 2900 mm - Draw cushion size: 4200 mm x 1800 mm - Draw cushion stroke: 280 mm - Draw cushion force: 380T - Draw cushion load: 4-way regulated draw cushion, no need for balancing - Table height above floor: 585 mm - Ram size: 5000 x 2900 mm - Ram cushion size: 3900 x 1500 mm - Ram cushion stroke: 150 mm - Ram cushion force: 200T - Ram return force: approx. 95T - Ram upper position: 1650 mm - Ram stroke: 1050 mm - Air pins recessed by 10 mm - Minimum installation height: 650 mm - Clamping below: manual clamping - Clamping above: manual - Centering: via air pin pattern - Sliding table travel: 3000 mm - Ram locking: Stepless - Blanking shock damping: No The above information is taken from the machine documentation. The seller accepts no liability for completeness or accuracy of these details. The actual technical data and functionality of the machine are decisive. Toolmaking (Tryout / Spotting)

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, type of input current: three-phase, table width: 805 mm, table length: 1,205 mm, oil tank capacity: 250 l, total length: 2,050 mm, total width: 1,410 mm, total height: 3,200 mm, overall weight: 8,000 kg, DGUV certified until: 08/2020, pressing speed: 11 mm/s, Equipment: documentation/manual, safety light barrier, For sale: fully operational and complete Ageo 160t hydraulic press. Full documentation and maintenance logbook are available. On-site inspection possible. VAT invoice provided. Heljyxg D Hehccqqenk

Condition: used, Year of construction: 2015, Pressure total: 2500 ton Stroke: 1700 mm Daylight: 2200 mm Free frontal opening L-R: 5100 mm Table surface area : 5000 x 2500 mm Slide area: 5000 x 2500 mm Die cushion capacity in table: 650 ton Die cushion stroke: 0 - 200 mm Die cushion pad area: 4260 x 2150 mm Max. die size: 5000 x 2500 x 1600 mm Ejector in ram: 65 ton Ejector stroke in ram: 200 mm Approach speed: 380 mm / sec Working speed: 200 mm / sec Return speed: 300 mm / sec Die weight at the ram max.: 30 ton Die Weight total: 60 ton Oil volume: 6000 l Required power: 2 x 230 kW Height over floor approx.: 9700 mm Hneloyw Twkjhccqqjk Weight of machine approx.: 533 ton Standard configuration Moving bolster extending forwardsCutting impact bumper dampingSIEMENS S7-300 controller