Used Monitoring for sale (5,181)

Condition: excellent (used), Year of construction: 2000, operating hours: 25,943 h, functionality: fully functional, machine/vehicle number: 175, total width: 1,350 mm, total length: 1,400 mm, total height: 2,250 mm, grinding spindle motor power: 1,100 W, input voltage: 380 V, overall weight: 1,450 kg, grinding spindle speed: 2,625 rpm, The machine is in perfect working order and underwent a major overhaul in 2020, during which the following parts were replaced or added: - All axes were replaced (including guides, lead screws, all bearings, and supports). - All gears and belts were replaced. - An automatic lubrication system was installed for all axes. Bdodpfxszxup Us Abtog - The internal lighting system was modified to highlight all sharp details. - LCD monitors were replaced. - The machine was fitted with an oil mist extractor. - Included is a replacement hard drive containing all the software.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Very well-maintained and robust OTT hot press, type ST 2511/80, with a pressing force of 80 tons. This press is ideally suited for gluing and veneering panels, furniture components, and other wood-based materials. The machine is in very good used condition. Technical data: Manufacturer: Paul OTT Type: ST 2511/80 Year of manufacture: 1987 Machine no.: A 6815 Pressing area: approx. 2,500 × 1,100 mm Pressing force: 80 t Specific pressing pressure: approx. 2.9 kg/cm² Total power: 15.6 kW Rated voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 24 A Heated press plates Temperature display for upper and lower heating plate Pressure and pressing time setting Bdsdpfx Abszxzbdjtog Safety tripwires Condition: very good Equipment: Upper and lower heating plate Hydraulic pressing device Adjustable pressing pressure Adjustable pressing time Temperature monitoring Safety tripwires Transportation possible for an additional charge! The machine is currently still at the customer's site. The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Year of construction: 2024, condition: good (used), functionality: fully functional, We are offering this well-maintained em machines Liquid Mate Sense Premium monitoring and control system for cutting fluids, manufactured in 2024, featuring a completely new set of sensors. Manufacturer: em machines Model: Liquid Mate Sense Premium Year of manufacture: 2024 Condition: good Category ID: 661 Type: Monitoring and control of cutting fluids Bedpfx Abszm Hahstodg The LiquidMate Sense Premium is an innovative, standalone plug-and-play solution for fully automated monitoring and control of cutting fluids in individual machines and central systems. It precisely measures concentration, pH value, and temperature, monitors the fill level, and actively regulates the cutting fluid. A major advantage is the circulation monitoring, which ensures regular movement of the cutting fluid and prevents bacterial growth and fungal contamination. The solution is low-maintenance, easy to install, and offers versatile connectivity, including an integrated online dashboard for convenient remote monitoring. LiquidMate is CE and UKCA certified and works with all common cutting fluids, contributing to environmentally friendly and cost-effective operation. If you have any questions or require further information, please send us a message or call us. We have 11 of these units available, and the machines can also be inspected. We can also offer them as a package.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, total length: 1,250 mm, total height: 1,900 mm, total width: 2,000 mm, overall weight: 1,850 kg, No minimum price – guaranteed sale to the highest bidder! Lease return due to factory closure. Machine for the automatic and precise separation or singulation of printed circuit boards from a PCB panel. MACHINE DETAILS New price 2024: €149,000.00 net Processed printed circuit boards: 42,680 pieces Dimensions of pallet (L x W x H): 1,250 x 2,000 x 1,900 mm Machine weight: approx. 1,850 kg EQUIPMENT Cutter diameter control Wear parts package DIVISIO Bsdpfxszvb I Ej Abtsdg Automatic transport width adjustment SMEMA transport height Separation module, shank cutter 500 W Hardware module, camera Software module, teach function for camera Software module, fiducial mark recognition Extension, 8-position tool changer Extraction hose, manual Monitoring of suction power ASYCAM CAD data conversion A Adrep Offset main switch ESD energy chains and P-hoses, standard Packaging size, group 3 pallet • The height and weight of the asset must be taken into account when selecting the transport vehicle. • A forklift is available for loading. • If the asset is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. • The sale is made without any guarantee or warranty. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the auction ends.

Condition: used, Year of construction: 2021, controller manufacturer: Siemens, controller model: SINUMERIK 840D SL Steuerung, _____ Description: Year of manuf. : 2021 Power : 4 kW Standard equipment Working area:4000 × 2000 mm Control cabinets:Integrated Drive technology:Gantry combined with linear direct drives Waste removal:Longitudinal conveyor belt Positioning laser diode:Included Spray system:Included Bedpezxwdhefx Abtodg Automatic nozzle cleaning:Included Features :- NitroLine :- AdjustLine :- ControlLine :- FlyLine :- FocusLine :- FastLine :- PierceLine :- Brass cutting set :- Copper cutting set Laser TruDisk 4001 :- Power 4 kW :- BrightLine Fiber :- High-Speed Cutting Package :- Power Package for Fusion Cutting Additional machine functions :- Drop&Cut :- Integrated camera 1 for process monitoring Additional cutting packages :- High-speed Eco cutting package :- Pneumatic cutting Technical specifications Simultaneous operation:170 m/min Average positioning deviation (Ps):0.03 mm Positioning deviation (Pa):0.05 mm Minimum programmable step:0.001 mm X-axis:4000 mm Y-axis:2000 mm Z-axis:116 mm Maximum workpiece weight:2000 kg Structural steel:25 mm Stainless steel:20 mm Stainless steel (extended):35 mm Aluminium:20 mm Copper:8 mm Brass:8 mm Software:incl. software licence

Condition: excellent (used), Process monitoring/tool monitoring for cold forming 2-channel device configured for a forming press Bdedpfx Abezr U Tmjtog incl. 1 sensor box and 1 interface Brankamp C20 devices detect process disturbances, protect the machine and tool from overloads, improve the quality of the produced parts, and assist operators in setting up the machine more quickly. In the event of manufacturing problems (e.g., tool breakage or ejection errors), they shut down the machine early to prevent costly consequential damage to the machine and tool. The system is complete.

Condition: used, This listing is for a Morgan Mini Monitor Series 900 Geiger Counter Bsdoxzgz Iepfx Abtodg Over the years Mini Monitor 900s have earned an excellent reputation for reliability, performance, versatility, ease of use and value for money. The 900 series continues to be a popular choice in education, research, medicine, industry and amongst environmentalists and enthusiasts.

Condition: excellent (used), Year of construction: 2015, ENGEL DUO 7050/1000 + Viper 40 RC300 Year: 2015 TECHNICAL DATA: • Clamping force: 1,000 tons Tie bar spacing 1420 × 1170 mm • Injection unit: 7050 • Screw diameter: 105 mm • L/D ratio: 22 • Bimetallic barrel • Control: ENGEL CC300 • ENGEL ecodrive SHV2 servo hydraulics • Power supply: 3×400V + N + PE / 50Hz OPTIONS: • 2× hydraulic core pulls on fixed platen • 4× hydraulic core pulls on moving platen • Total: 6× hydraulic core pulls • Core pulls with locking valves & pressure relief • Euromap 13 • 24-zone hot runner control • Max. hot runner heating capacity: 50 kW Bdodpfx Abjzxy Szstjg • Euromap 14 • 6× hydraulic valve gate control • Centering diameter: 250 mm • Through-hole in moving platen: 250 mm • Hydraulic shut-off nozzle • Electric screw drive • Ceramic barrel heaters • Barrel insulation • Interface for dosing/coloring unit • Separate cooling water connection for machine & mold • 20× flow regulators, 0–30 l/min • Mold temperature control circuits up to 95°C / 6 bar • PD-Graphic process monitoring • Ecograph energy consumption monitoring • Ethernet + USB • Process data logging ROBOT: ENGEL Viper 40 RC300 • Max. handling weight: 21 kg • X stroke: 1,200 mm • Y stroke: 1,900 mm • Z stroke: 4,280 mm • A/B/C servo axes, 70 Nm • Automatic central lubrication • Additional vacuum & compressed-air circuits • C70 handheld controller with 7” touchscreen CONVEYOR: ENGEL FB100 • 3,000 × 1,100 mm • Belt speed: 6 m/min • Adjustable height: 1,000–1,200 mm • Safety tunnel • Photoelectric sensor Including safety fencing and integrated robot interface.

Condition: used, functionality: unexamined, Year of construction: 2019, The Dematic line is disassembled and ready for transport. Bdjdpfx Aszxrtkobtjg Manufacturing date: 2019/2020. Technical throughput: – Conveyor capacity from the mezzanine to the induction stations – 1,800 cartons per hour – Conveyor capacity from the TTU sorter to VAS and the outbound sorter – 1,560 cartons per hour Loading units: a) Cartons on internal conveyors: – Average weight: 15 kg/carton – Dimensions: 600 x 400 x 400 mm – Weight: from 1 to 30 kg/carton b) Cartons on outbound conveyors: – Dimensions: 800 x 400 x 340 mm – No lid – Lid is applied at the end before shipment – Weight: from 1 to 25 kg/carton – Average weight: 15 kg/carton The line is equipped with two TTU sorters. The TTU sorter is a compact sorter that works perfectly in narrow spaces. The TTU is capable of sorting both plastic bags and cartons. Each sorter consists of 2 infeed areas and 300 discharge locations. The two combined sorters have 4 infeed lines and 600 discharge locations. Cartons on the conveyor are identified and transported to the appropriate zone on the sorter. Sorter equipment: – 32 workstations with 16 screens – 16 screen supports – 20 RF scanners (10 per sorter) – 4 pallet discharge locations – SCS server – 2 Lantech case erectors and Robatech glue applicators – 2 Altek 700 kg scissor lifts, located on the outside of each sorter. Access to the platform is secured by a Troax system – when the lift is activated, access to the loading area is prevented by an electromagnetic lock. Additionally, the platform is enclosed with welded wire mesh. – 2 Fischer platforms – workstation for 12 employees (6 on each side), equipped with Data Logic barcode scanners and a Beckhoff CP3716-1071-0010 monitor.

Condition: used, Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 250 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, total height: 2,050 mm, total length: 2,800 mm, total width: 2,200 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 215 mm, workpiece width (max.): 560 mm, workpiece length (max.): 800 mm, type of input current: AC, overall weight: 2,500 kg, input voltage: 400 V, positioning accuracy: 0.001 mm, Equipment: cooling unit, documentation/manual, CHMER A422S Wire EDM Machine Year of manufacture: 2008, used Travel in X: 400 mm Travel in Y: 250 mm Travel in Z: 220 mm Maximum workpiece size: 800 x 560 x 215 mm Maximum workpiece weight: 250 kg Travel in U x V: +/- 30 mm Maximum taper angle: +/- 14.5° / 80 mm Wire diameter: 0.15 to 0.3 mm Axis drive system: AC servomotors Bdsdpfozhvhdex Abtog Glass scales in X and Y axis Achievable surface accuracy: RA 1.6 µm Anti-electrolysis generator CNC control: FANUC compatible 15” TFT monitor Handheld remote control Automatic wire threading with thermal wire cutting Threading without water jet in 6 seconds Dielectric cooler Block for automatic vertical and conical wire alignment Documentation in English A horizontal rotary axis (6th axis) is included. This was dismantled due to lack of need and was not in operation. Connection: 400 V, 3-phase, 13 kVA Dimensions (L x W x H): 220 x 280 x 205 cm Machine weight: 2,500 kg Optional Hirschmann clamping frame: €2,000.00 Commissioning, price based on effort Basic training, price based on effort

Condition: used, Year of construction: 2010, functionality: fully functional, Technical specifications: System output: up to approx. 2,000 cuts per 8 hours, depending on the cross-sections of the reinforcing bars used Feed magazine: 12 positions, automatically timed Discharge magazine: 12 positions, automatically timed Bar length, maximum: 6,000 mm Bar length, minimum: 400 mm Cutting length, maximum: 4,000 mm Cutting length, minimum: 170 mm Bdodpfx Aozm I Dhebtog Remaining piece processing: 350 mm Profile dimensions: 86 × 70 mm Wall thickness, maximum: 3 mm Functionality and features: • Saw unit with spray medium system • Automatic operation • Lateral discharge in the Z-direction • Screen-based dialog system with loading table display • Direction of travel, depending on the model, from left to right or from right to left Control and hardware configuration: • High-quality PC with a 19-inch TFT color monitor • USB ports • DVD drive • Keyboard • Windows operating system • Remote maintenance via the internet

Condition: good (used), Width: 485mm, Bdedpfjt Hf Ikjx Abtjg Height: 400mm, Depth: 125mm, Weight: 7560g, Area of application: Lisec, glass cutting system, ESL-60/30RS etc.

Year of construction: 2021, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE FOR TUBES WITH LOADING/UNLOADING SYSTEM MIN CIRCULAR SECTION: 20 mm MAX CIRCULAR SECTION: 152,4 mm MAX SQUARE SECTION: 152,4 X 152,4 mm SOURCE: IPG fibra 3000W ; 3000 W CONTROL UNIT: CUTLITE PENTA Z32 ACCESSORIES: FUME EXHAUSTER ; ETHERNET PORT ; USB PORT Bjdpfx Abozxu Nnetsdg NOTE: AUTOMATIC BAR LOADING 6500mm; BAR UNLOADING UP TO 6000 mm; TUBE UNLOADING CUTTED ON THE BELT - MAX LENGHT 5000mm; CAPACITIVE SENSOR; No 2 INNER MONITORING WEBCAMS; ADDITIONAL X AXIS FOR HIGH-SPEED DRILLING; ALMA SOFTWARE

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1183016, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, workpiece length (max.): 1,270 mm, workpiece width (max.): 635 mm, workpiece height (max.): 508 mm, workpiece weight (max.): 794 kg, table width: 475 mm, table length: 1,321 mm, overall weight: 6,033 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 2,240 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, MACHINE Vertical machining center, HAAS, VF-4SS STANDARD EQUIPMENT: CNC control, 4 axes, HAAS type (NGC version), compatible with Fanuc, ISO programming, G-codes ISO40 spindle taper, CT type 1 GB memory capacity 15" LCD monitor, touchscreen and USB port Ethernet + WiFi network card Early voltage drop detection module (prevents the effects of voltage drops) HaasConnect – remote monitoring of machine operating status via the Internet, VNC and DPRNT protocol Program restart – ability to start the program from any block RunStopJogContinue – ability to move the tool without interrupting the program SafeRun – active anti-collision system (minimizing the effects of collisions) Electronic handwheel Spindle cooling system Temperature compensation for ball screws Protective cabin with sliding front doors and side windows Side magazine with 30 positions Memory lock Spindle taper air blow system Thread cutting without a compensating chuck (rigid) Installation for connecting compressed air Cooling system with a pull-out coolant tank, filled with coolant Automatic central lubrication system Machine tool lighting "Guns" for air and coolant (mounted on the front of the machine) 4AXD – Machine preparation / connections, wiring / For connecting the table, without a table AUGER – Screw chip conveyor HSM – Faster processor with look-ahead function, accelerating the machining of shapes with 3-axis interpolation ACF – Additional 25 μm filtration system, essential for machining cast iron, aluminum, wood, and phenol-based and other dusty materials TSC* – Through-spindle cooling, pump with increased power /21 bar, 22 l/min/ (ACF option required) WIPS-R – Renishaw probe set, wireless, for measuring tool radius and length, for measuring and setting using (graphic) measuring cycles. Bdedpszt Nlmofx Abteg SO – Spindle orientation MACRO – Parametric programming COORD – Scaling and rotation of the coordinate system VPS (Visual Programming System) – graphic machining cycles, expansion and creation of custom cycles

Condition: like new (used), Year of construction: 2022, functionality: fully functional, NC joining module from Kistler NCFH 30 400 300 B H C G 30 kN Brake 18 Nm Bdjdpewhvrrofx Abtsg Year of manufacture according to seller: 2022 Comes from a test setup for pressing battery cells. This means it has only been used a short time. Includes control cabinet, joining module (including sensor as shown), and monitor. Please note: The parts should be complete, but some of the cables have been cut off. Unfortunately, a circuit diagram is not available.

Year of construction: 1995, condition: not inspected (used), Number of sanding units 2 st. sanding width 180 mm Sanding height max. 150 mm MAWEG Robert Hildebrand Saturn Duo Professional two-belt finish sanding machine with brushing unit Double-sided; sands from top and bottom Pneumatic belt oscillation Pneumatic belt tensioning Feed via top and bottom conveyor belts with spring-loaded hold-down rollers; infinitely variable speed (5–15 m/min) Workpiece thickness adjustment with pre-selectable stock removal amount at machine infeed, based on sensing the raw timber thickness Adjustment to wood thickness via motorized positioning of the machine's upper section Digital thickness setting via mechanical counter with 0.1 mm display and zero-point adjustment Safety switch for oversized wood thickness at machine infeed Double-sided brushing unit with integrated workpiece blow-off Sanding belt blow-off (top and bottom) Belt breakage monitoring switch with automatic shutdown of all drives Technical data: Top motor: 4 kW Bottom motor: 4 kW Top brush: 0.37 kW Bottom brush: 0.37 kW Feed drive: 0.5 kW Height adjustment: 0.12 kW Compressed air requirement: 6 bar, 400 NL/min Sanding belt speed: 25 m/sec Machine dimensions: Bdedpfx Aszqgg Aebtjg 1,600 mm length 1,150 mm width 1,800 mm height Workpiece dimensions: Min. thickness 15 mm, max. thickness 150 mm Min. width 10 mm, max. width 180 mm Min. length 290 mm 4 extraction ports: 2 x 120 mm, 2 x 80 mm; required air velocity at extraction port: 25 m/sec (Technical specifications according to manufacturer – subject to change/no guarantee!)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC machining center Matec 40 HV Control system: Heidenhain iTNC530 Year of manufacture: 2013 Internal machine number: 44 Location: Netherlands Travel distances: X-axis: 4,000 mm Y-axis: 1,200 mm Z-axis: 1,300 mm (horizontal) A-axis: 0-135° B-axis: +-106° NC rotary table: 1,250 mm with 50 rpm Clearance diameter: 1,600 mm, 50 rpm with torque drive Tool magazine: 60 positions Tool holder: HSK 100 Motor spindle: 15,000 rpm / 90 kW Accessories - Chip conveyor - 5-axis simultaneous operation package - Last major maintenance in 2023 - Extraction system - Internal cooling system 70 bar - 3D measuring probe with wireless connection - Tool breakage monitoring Bdjdpfjzxp Dtox Abteg - Handwheel with wireless control HR 550 FS

Condition: used, Year of construction: 2008, throat depth: 680 mm, nominal power at 50% duty cycle: 45 kVA, input voltage: 400 V, Combined roll seam and spot welding machine, type UN63 - Roll seam welding - Rated voltage 400V/50Hz - Rated power 45kVA - Welding current 15kA Bdjdozh Izcspfx Abtog - Fuse rating 125A - Overhang 670mm - Upper roller diameter 175mm - Lower roller diameter 120mm - Arm distance 350mm - Electrode force 500daN - Stroke approx. 30mm - TE500 control unit with 99 welding programs, parameters for each program, digital current display after each weld, current monitoring, stepper function, Language selection: German, English, Italian, French, etc., with operating manual - 2-stage foot switch according to UVV standards - Machine main switch - Pneumatic maintenance unit - Weight approx. 680kg - Documentation with circuit diagram, compressed air diagram, and cooling water circuit - VAT can be shown separately - Spot welding fixture / electrode holder and lower arm available at an extra cost. The machine is located in Dresden, near the A17 highway, and can be inspected and demonstrated by appointment. On-site commissioning is subject to a fee, billed according to actual effort.

Condition: used, mileage: 27,906 km, power: 130 kW (176.75 HP), first registration: 09/2025, fuel type: diesel, color: grey, gearing type: mechanical, number of seats: 3, total length: 5,986 mm, total width: 2,040 mm, total height: 2,590 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, * 5-year manufacturer's warranty for Germany, starting from the date of initial registration * Tow hitch included * Approved as a 3.5-tonne vehicle * Standard climate control zones * Electronic Stability Program (ESP) * Towing eye at the front * Disc brakes at the front * Front-wheel drive * Multifunction steering wheel * Partition, with fixed window * Three-point automatic seat belts in the front with electric belt tensioner * High roof in vehicle color * Double bench seat in the driver's cabin on the right * Seat in the driver's cabin on the left * Enhanced interior noise reduction * Heated front seats, individually adjustable * Windshield, heat-reflective glass * Central locking "Keyless-Go" without safe lock * Dashboard with special attachments * Airbags for driver and front passenger, without knee airbag, with front passenger airbag deactivation * Exhaust system, WLTP3 N1-III, N2//EU6EA * Rubber floor covering in the driver's cabin * Wooden floor in the cargo area * Approved as a truck * Sliding door on the right in the cargo/passenger compartment * Exterior mirrors, left and right, convex plus wide-angle * Hinges for rear doors with enlarged opening angle * Lashing eyes for securing cargo * Sun visors without mirror, without ticket pocket * Lane assist * Radiator protection grille * C-rails, side and partition * Interior grab handle (entry at the partition) * Exterior mirrors, electrically adjustable, separately heated * Immobilizer, electronic * Entry handles on rear pillar, left and right * FPK medium * Tire pressure monitoring, frequency 433 MHz High * Start/Stop system with recuperation * Engine start, standard * Park steering assistant * Optional infotainment (MIB3 MP) version 1 * Alternator 140 A * Front Assist with warning and braking on vehicles, pedestrians and cyclists * Intermittent windshield wiper control with light/rain sensor * Key for locking system with remote control * 4 speakers (passive) * Cruise control system (ACC), electronic * Daytime running light control with driving light assist * LED interior lighting concept in the passenger/cargo compartment * Preparation for Smart TCO * Seatbelt warning, electrical contact in the seatbelt buckle * Wired & Wireless App-Connect * Operating voltage 12 V * Comfort telephony, without external antenna connection * 4-cylinder turbo diesel engine, 2.0 L/130 kW (4V) TDI * Online service, with OCU, with head unit coding, without WFS connection * Distraction and fatigue detection * With socket at the front * 6-speed manual transmission * Preparation for alcohol interlock * Preparation for interface for external use, with electrical connection strip * With rear view camera system (version 2) * Air conditioning with electronic control * With crosswind assist * With predictive speed limiter (pLIM) * Seat covers in fabric * With UNECE CS&SU * Pan-European eCall * Assistance package Basic including "Intelligent Speed Assist" and cruise control system * Assistance package Professional including park steering assistant & parking assist in the front and rear area including side protection * With multifunction camera * Heat-reflecting glazing * With traffic sign recognition * Digital radio reception Bsdjzx I U Dspfx Abtodg * Cd value trim * Prepared for VW Connect and VW Connect Plus * 4-cylinder diesel engine, 2.0L, design 03N.G * External, USB Type-C data and charging ports with increased charging power * Hill start assistant * Parking brake * All-season tires * Front axle "Standard" * Navigation system Disc

Condition: used, Year of construction: 2020, operating hours: 21,398 h, machine/vehicle number: IntNr231185, EMAG WEISS W11 CNC SL650 – Universal Cylindrical Grinding Machine – Year of Construction: 2020 Bdjdpfxozp Idtj Abtjg For sale is a used EMAG WEISS W11 CNC SL650 – a high-performance universal cylindrical grinding machine with CNC control. This machine is ideally suited for demanding grinding operations on individual parts, prototypes, and small to medium production runs. Machine Specifications Manufacturer: EMAG WEISS Type: W11-CNC SL650 Year of Construction: 2020 Operating Hours: Approx. 8,850 spindle hours / approx. 22,000 power-on hours Condition: Used, well-maintained, ready for immediate operation Technical Data Control: CNC-controlled (e.g., Heidenhain / Siemens / Fanuc – depending on the configuration) Max. Grinding Length: 650 mm (between centers) Center Height: Approx. 200 mm External Grinding Diameter: Up to approx. 390 mm Max. Workpiece Weight (overhanging): Approx. 100 kg (MK4) Max. Workpiece Weight (between centers): Approx. 250 kg X-Axis Traverse: Approx. 380 mm Z-Axis Traverse: Approx. 1,150 mm Grinding Wheel Diameter: 400 – 500 mm depending on equipment Rated Power: 9 – 11 kW (approx. 12 – 15 hp) Peripheral Speed: 20 – 50 m/s Equipment and Performance Features CNC touchscreen operation with Windows-based interface – user-friendly programming via dialogue or DIN/ISO (optional) Two-in-one concept: The machine can be operated both conventionally and CNC-controlled. High-precision linear and ball screw guides for high accuracy Direct measuring system (glass scales) (optional on many machines) Automatic dressing of the grinding wheel with compensation Crash control & gap monitoring for machine and process safety Coolant system, emulsion separator, and chip conveyor available (depending on equipment) Preparation for automation / robot interface possible The machine can be inspected in operation by appointment. Subject to changes and errors in technical data and specifications as well as prior sale!

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: ML0271-000198, spindle speed (max.): 6,000 rpm, spindle motor power: 15 W, total height: 1,600 mm, total length: 2,325 mm, total width: 1,600 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, type of input current: three-phase, bar passage: 65 mm, Equipment: documentation/manual, We are offering for sale a DOOSAN LYNX 220LSYC CNC lathe with a tailstock, in good condition, manufactured in 2015. It operated for 2 years in medium-volume series production, and since then, it has been used to produce smaller series and custom parts. The machine is equipped with a chip conveyor, tool measuring device, a chuck with collet mounting, and a 3-jaw hydraulic chuck. It has powered tool holders (3 pieces). It includes an LNS bar feeder, capable of handling bars up to 3 meters in length (included in the price). Other features include: workpiece ejector, workpiece catching and delivery system, tool load monitoring, and an oil separator, which extends the coolant's lifespan. It also has a highly rigid cast iron machine bed and a turret with 12 tool positions (24 positions). The dimensions refer only to the lathe itself. Weight: 2900 kg (the weight of the bar feeder is separate). Net price. If you have any questions or require further information, please send us a message. Bjdpfey Uwgqex Abtodg

Condition: used, mileage: 22,088 km, power: 130 kW (176.75 HP), first registration: 09/2025, fuel type: diesel, color: white, gearing type: mechanical, number of seats: 3, total length: 5,986 mm, total width: 2,040 mm, total height: 2,590 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, * 5-year manufacturer's warranty for Germany, starting from the initial registration date * Trailer hitch included * Approved as a 3.5-tonne vehicle * Permissible total weight * Electronic Stability Program (ESP) * Towing eye at the front * Disc brakes at the front * Multifunction steering wheel * Partition, with fixed window * LNFZ version * Three-point automatic seat belts at the front with electric belt tensioner * High roof in vehicle color * Double bench seat in the driver's cabin on the right * Seat in the driver's cabin on the left * Enhanced interior noise reduction * Seat heating for front seats, separately adjustable * Windshield, heat-insulating glass * Central locking "Keyless-Go" without safe lock * Dashboard with special features * Airbags for driver and front passenger, without knee airbag, with front passenger airbag deactivation * Emission control system, WLTP3 N1-III, N2//EU6EA * Rubber floor covering in the driver's cabin * Wooden floor in the cargo area * Approved as a truck * Sliding door on the right in the cargo/passenger compartment * Exterior mirror on the right, convex plus wide-angle * Exterior mirror on the left, convex plus wide-angle * Hinges for rear doors with enlarged opening angle * Lashing eyes for securing cargo * Lane keeping assist * C-rails, side and partition * Interior grab handle (entry at partition) * Exterior mirrors, electrically adjustable, separately heated * Engine immobilizer, electronic * Entry handles on rear pillar, left and right * Tire pressure monitoring system, frequency 433 MHz High * Park steering assistant * Optional infotainment system (MIB3 MP) Version 1 * Halogen double headlights * Front Assist with warning and braking on vehicles, pedestrians and cyclists * Windshield wiper interval control with light/rain sensor * Key for locking system with remote control * 4 speakers (passive) * Cruise control system, electronic * Daytime running light control with assistant driving light * LED interior lighting concept in the passenger/cargo compartment * Preparation for Smart TCO * Seat belt control, E-contact in seat belt lock * Wired & Wireless App-Connect * Operating voltage 12 V * Comfort telephony, without external antenna connection * 4-cylinder turbo diesel engine 2.0 L/130 kW (4V) TDI * Online service, with OCU, with head unit coding, without WFS connection Bjdpfx Aozx I Uwobtjdg * Driver drowsiness detection * With socket at the front * 6-speed manual transmission * Preparation for Alcohol Interlock * Preparation for interface for external use, with electrical connection strip * Battery 520A (92Ah) * With rear view camera system (Version 2) * Air conditioning with electronic control * With side wind assistant * With predictive speed limiter (pLIM) * Seat covers in fabric * With UNECE CS&SU * Pan-European eCall * Basic assistance package including "Intelligent Speed Assist" and cruise control system * Professional assistance package including park steering assistant and parking assistance in the front and rear area including side protection * With multifunction camera * Heat-insulating glazing * With traffic sign recognition * Digital radio reception * Cd value cladding * Prepared for VW Connect and VW Connect Plus * 4-cylinder diesel engine 2.0L, Aggregate 03N.G * External, USB Type-C data and charging ports with increased charging capacity * Hill start assistant * Parking brake * Front axle "Standard" * Navigation system Discover Media with 26 cm (10.4") touch color display with 4 speakers Convers

Condition: used, Year of construction: 2001, Perfect binder Wohlenberg Quickbinder Year: 2001 Description: Bdjdpfx Aszxzr Nsbtsg - Colour monitor with touch screen - Hand feeding - Number of clamps: 5 - Milling and roughening station - Dust extraction system - Hotmelt spine glue unit - Cold glue spine glue unit - Hotmelt side glue - Gauzing station - Cover feeder - Scoring station - Nipping and pressing station - Belt delivery

Condition: good (used), Year of construction: 2009, CNC control, control panel, computer monitor, screen, TFT industrial monitor -Manufacturer: B&R, control panel, operating terminal, control panel -Type: PowerPanel 500 5PP5:210261.001-01 -Individual components: see photos -Number: 2 terminals available -Price per piece -Total dimensions: 740/730/H210 mm -Weight: 26 kg/pc. Bsdpjtrzp Eofx Abtedg

Condition: used, Used focus parameter monitor for monitoring and analyzing laser processes in industrial production facilities. The system is used for process monitoring and quality control of laser optics and laser machining processes. Manufacturer: PRIMES Device type: Focus Parameter Monitor Model: FPM Condition: used Year of manufacture: 2018 Bodpfszdni Esx Abtodg Serial number: 16358 Communication interface: PROFINET 2 x Ethernet port COM interface DCP interface Service access available Status display: Link Tx/Rx MAC address: 00:03:F4:0B:04:B0 IP address: 192.168.116.119 Robust industrial housing made of aluminum Integrated carrying handle For laser process monitoring and focus analysis Location: Kusel Quantity: 2 units available