Used other industrial automation technology for sale (289)

Condition: new, functionality: fully functional, Hirschmann OZD Profi 12M G12 Multimode converter 2-port - Signal converter Gjdpfx Aotvz D Eslbeiu Hirschmann OZD Profi 12M G12 : Transfer rate 500 kbps, Service primary side PROFIBUS, Connection type primary side other, Service secondary side PROFIBUS, Connection type secondary side D-Sub female 9-pin, Bidirectional yes, Overcurrent protection no, Galvanic isolation without, Rated current consumption 200 mA. Good working condition. Please check out our other listings as well.

Condition: used, functionality: fully functional, ABB ACS600 ACS60100703000F1200000 AC Variable Frequency Drive. U1 380...415 V U2 380...415V I1hd/I1n 106/90 A I2hd/I2n 112/89 A Godpfjr Idq Sex Albjiu f1 48-63 Hz f2 0…300 Hz Good working condition. Please check out our other listings as well.

Condition: used, functionality: fully functional, Lenze E94AZMS0094 Mains Filter Single Drive. Ir: 9A Godpotvz Htefx Alboiu U: 3x 500Vac f: 50-60 HZ L: 3.5 mH 2 Mains filter for sale. 1 piece/425 EUR Good working condition. Please check out our other listings as well.

Condition: like new (used), functionality: fully functional, FESTO DGPL-32-700-PPV-A-KF-B; 161793 Linear actuator. Gijdpfoturw Nsx Albeu Good working condition. Please check out our other listings as well.

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Gjdefzq Stjpfx Albjiu Prices are given in the catalog

Year of construction: 2020, condition: new, ROMER® is the largest producer of powder paint shops in Poland, and one of the largest in Europe. ROMER® is over 10,000 manufactured devices operating in over 45 countries around the world. Gedjfzq Ryspfx Albjiu ROMER® Produces single technological equipment for powder paint shops as well as complete fully automatic turnkey paint shops. ROMER® provides heating solutions for the aero and automotive industries for the largest concerns in the world. We provide warranty and post-warranty service of the devices we sell with a full range of spare parts.

Year of construction: 2026, condition: new, 🏭 POWDER COATING BOOTH KPH Automatic filter cleaning with adjustable pulse timing, plus manual mode. 🧼⏱️🖲️ 100% polyester filters - washable, water-resistant, long-lasting. 🧵💧♻️ ROMER JET™ filter cleaning - patented high-speed air pulse for powerful cleaning. 💥💨🏅 Low-noise aluminium fans (74-79 dB) - safer, spark-minimized operation with low power use. 🔇⚡🛡️ Adjustable airflow baffle - antistatic plate protects filters and improves extraction. 🌬️🛡️📈 Leak-tight filter mounting - gasket + clamp for strong sealing and easy service. 🔩🧷✅ Touchscreen control - auto (time), auto (clogging sensor), manual + filter change alerts. 📲🔁⚠️ Optional powder container - waste collection or fluidized tank with direct applicator feed. 🧺💨🎯 Overhead puller - moves beams through the booth, reducing manual effort. 🏗️➡️💪 Giedpfx Asfz Atbjlbeu Integrated sieving unit (with container) - clean recovered powder for reuse, EX-zone vibrator. 🧪♻️⚙️ Explosion-proof design - components selected to prevent explosive mixtures. 🛡️💥✅

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings Godpfx Alsfz Dtzoboiu materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Year of construction: 2020, condition: new, DESCRIPTION The demineralized water station is used to produce the so-called demi water using ion exchange technology. The station consists of 3 columns Strongly acid cation exchanger working in the sodium cycle, Strongly basic anion exchanger working in the chloride cycle, Carbon filter Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads. Rouezts The columns are made of AISI316L steel Gsdpfx Aofz I Nholbeiu

Year of construction: 2020, condition: new, The ROMER company is also involved in the production of suspended transport systems. Cross traverses (Cross transports) are designed and manufactured for specific installations Oghxp Examples of equipment are presented below: Transport systems Depending on the customer's requirements, the transport systems can move on the floor or be hung on poles. - For comfortable solutions for manual installations, we recommend suspended crossbeams (cross transport). Gsdjfz Dibopfx Albjiu - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have, for example, several cabins with different colors, flexible solutions are used with the use of a power-and-free conveyor. This is the most expensive solution.

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events Gjdofzkqmspfx Albjiu You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Year of construction: 2019, condition: ready for operation (used), number of axes: 3, This 3-axis LVD Load-Assist 4020 was manufactured in 2019. It features a maximum sheet size of 4000 x 2000 mm, making it suitable for various applications. If you are looking to get high-quality automation capabilities, consider the LVD Load-Assist 4020 machine we have for sale. Contact us for further details. Giodpfjy Sakmox Albou • Max sheet size: 4000x2000mm

Year of construction: 2026, condition: new, functionality: fully functional, ELECTRONIC VERTICAL DRILLING MACHINE FOR GLASS MODEL: PRIAM MANUFACTURED IN 2026/ BRAND NEW Priam model is a two-spindle (double-sided) vertical glass drilling machine. It is designed for customers looking for a functional and easy-to-use machine that is also durable. When designing it, we went back to the old school of machine construction – on heavy, heat-treated steel bodies with mechanical solutions for subsequent easier operation and servicing. With this different approach to design and manufacturing, our machine ensures many years of trouble-free glass drilling, providing a multiple return on investment. To make sure that the components of our drill are made with due care, we manufacture them in Poland using local contractors. The main body is made on site, by our company, and then heat treated and processed further in local areas. This ensures that all production is carried out under our careful supervision, and any imperfections can be detected and corrected before the product reaches the customer. This ultimately also supports the local machinery industry. The product’s components are at the highest European level. Our suppliers include SIEMENS, HITACHI, UNITRONICS,SCHNEIDER,GARLOCK Mechanical components are accessible, while in-service replacement is simple and quick. The Expoglass Priam drill - functionality at the highest level: ⦁ 2 spindles (front and back) – allowing to drill the pane in a single pass – without turning it ⦁ Electronically controlled loading bar – in order to set the size of the bottom edge of the glass from the hole, you just need to enter the required size on the touch screen and the machine will automatically adjust to the right position ⦁ Quick drilling bit change mode – after pressing the drill bit change button, both spindles are automatically locked (they cannot be turned), the vertical table, located between both drilling bit, slides down – thus opening a large space between them. This means that the drill bits can be unscrewed without the use of a wrench, and there is plenty of space to perform this operation comfortably. ⦁ Automatic (electronic) measurement of the drill bits length and position – after the drill bits have been changed, the machine automatically calibrates them, measuring their length so that it knows the distance between the glass and the drilling end of each bit – very important in small plants where there are no series, but most of the holes are made individually ⦁ Automatic (electronic) calculation of spindle cavity depth – after automatic calibration of spindles, the machine measures the thickness of drilled glass by itself, by pressing the glass, and then selects the perfect values of cavities on its own. The operator's only task is to click the "drill" button, the process is completely automatic Giedpogq Dl Ajfx Albou ⦁ Electronically controlled feed of the spindles – significantly increases machine capabilities, in addition to enabling the operation of most of the foregoing functionalities, it also makes the feed values perfectly adaptable to any situation and changeable with just a few clicks on the screen. This is illustrated, for example, by the fact that e.g. after drilling a 15 mm piece of glass, you take 10 seconds to change the settings, you can immediately drill a 2 mm glass pane without fear of cracking or chipping. And all this without the experience and "intuition" of the operator

Condition: new, functionality: fully functional, overall weight: 160 kg, Year of construction: 2025, The JCYP3525H is a high-performance, tower-type concrete 3D printer designed for the production of precast elements, architectural components, and construction-related additive manufacturing. Delivered new directly from the manufacturer, this machine offers industrial-grade specifications at a competitive price point, significantly lower than that of European-manufactured equivalents. Key Technical Specifications Build size: 3,500 × 3,500 × 2,500 mm Machine dimensions: 2,700 × 2,500 × 2,700 mm Nozzle diameters: 20 mm / 25 mm (interchangeable, quick-release) Gijdpfsymc Szox Albsu Compatible materials: Concrete, geopolymer, cement-based mortars Layer thickness: 3–20 mm (adjustable) Print speed: 0–200 mm/s Extruder screw: 3D curved screw design for consistent material flow Material feeding: Pump-fed system with automatic PID control Drive system: Rack & pinion with servo motors (high repeatability) Extruder: Quick-disassembly design for fast cleaning and maintenance Dust protection: Bellows covers on all linear axes Installation: Easy on-site assembly design Machine Highlights ✔ Servo motor drive system – high positioning accuracy and repeatability ✔ Automatic feeding with PID control – consistent extrusion, no manual intervention ✔ 3D curved screw extruder – superior concrete homogeneity compared to standard auger designs ✔ Quick-disassembly extruder head – downtime under 10 minutes for cleaning ✔ Compatible with standard dry-mix concrete – no proprietary materials required ✔ Dust-proof bellows on all axes – suitable for outdoor and factory environments Suitable Applications Precast concrete element production Architectural facade panels and decorative elements R&D and university / testing laboratory use Geopolymer and sustainable construction material development Small-format wall sections and structural components Commercial Terms Condition: New Availability: In stock / lead time approx. 6–8 weeks Delivery: DAP / CIP Central Europe available CE documentation: Available upon request Training and commissioning support: Available Warranty: 12 months on mechanical and electrical components

Year of construction: 2023, condition: used, Good condition with low usage. 7inch - 1920 capacity Godpfxey R S Dpj Albjiu 15inch - 425 capacity ISM material incoming station. Ask for quotation!

Condition: excellent (used), Microbox Simatic PC 420 6 A G 4040-OAE 10-OA BO S VPTN 00 1726 Godpfx Aoim H Shjlbjiu

Condition: new, functionality: fully functional, Year of construction: 2022, overall weight: 150 kg, total height: 2,300 mm, total length: 1,200 mm, total width: 600 mm, controller model: SPS-Steuerung, working width: 300 mm, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 6 bar, load capacity per stand: 50 kg, number of drawers: 1, positioning accuracy: 1 mm, working height: 30 mm, working length: 400 mm, working range: 400 mm, Equipment: CE marking, safety light barrier, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH) Gjdpfxoyx Hgbe Albjiu

Condition: used, For sale here is a PRA400 coil winding machine from Meteor. The machine was fully functional until recently. This is a professional winding machine, suitable for coils and transformers, for example. The PRA series from this manufacturer is designed for precise, automated production of windings and coils. The machine is equipped with 4 spindles. Gisdpfx Aey Sw Ezelbsu

Condition: excellent (used), Hydraulic separator from MAGRA Giodpfxjwkrrte Albsu - Type WST 350 - 4 x DN 200 flanges - Built in 2023, but only in operation for 6 months New price = €1,950.00 net

Condition: used, Year of construction: 2009, Offered here is a soldering robot from ATN Berlin. This is the "Vario" model. Component feeding is realized via exchangeable cassettes. The soldering process uses induction, making it a contactless soldering method. Gedpfx Alsy Slkfsbjiu

Year of construction: 2009, condition: used, For sale is our welding system from AEF Hauzenberg. This is an electrode welding system. Inside the unit, there are three zones where welding processes can be carried out simultaneously. The system is equipped with a control cabinet featuring a PLC, allowing the process parameters of the welding operation to be set. We used Silfos (AG) brazing alloy. Included in the delivery is also a water chiller from Habor, model HWK-1000PTSB2. Gijdpfx Alsy Skq Robou

Year of construction: 2014, condition: used, Used machinery. 3 of total available. Giodsy R U Spepfx Albou

Year of construction: 2019, condition: used, Operational machine. Ask for additional information. Second unit as well, vintage 2021. Gjdpfx Asy R U H Hslbsiu

Year of construction: 2026, operating hours: 5 h, condition: like new (used), functionality: fully functional, working range: 500 mm, machine/vehicle number: RC-1-0505, CNC Stud Welding Machine RC-1-0505 consisting of: Giedpfx Aloy Stahjbju 2-axis system 500 x 500 mm, motor-driven KAH100 welding head and automatic stud feeding system CDP-99 capacitor discharge (CD) welding unit Stud diameter: M3-M8; length range: 8-25 mm Weldable materials: steel, stainless steel, aluminium Fully enclosed housing with pneumatically operated safety door and additional light curtain safeguarding User-friendly control system The RC-1-0505 stud welding system stands out due to its high-quality equipment and a safety enclosure with protective panels and additional light grid. The system includes a CDP-99 stud welding unit using capacitor discharge technology, a fully automatic stud feeder, and a KAH100 welding head. The working area of the machine is 500 x 500 mm. The system is easy to operate and program, even for inexperienced operators. Welding positions can also be set via teach-in procedure using a crosshair laser and handheld control unit. Model: RC-Z-0505 NEW and unused Working area: X 500 mm x Y 500 mm, motor-driven; Z 150 mm, manual External dimensions: L 1016 mm x W 1350 mm x H 1663 mm Travel speed: max 40 m/min Compressed air: 6 bar; storage tank for pressure fluctuations included Power supply: 380 V / 50 Hz, CEE 16 A connection, 2.5 kW

Year of construction: 2019, condition: ready for operation (used), This TGT Robby 900 XL was manufactured in 2019. It features a Palfinger crane 1500, a forklift lift of 1.8 m, and a Honda engine. The machine is installed on a crawler chassis with a telescopic width and offers a working height of approximately 6.5 m. It has a crane load capacity of up to 900 kg and a fork load capacity of 2000 kg. Contact us for more information about this machine. • Crane: Palfinger 1500 Godpjx D Htvjfx Albjiu • Chassis: Crawler chassis with telescopic width • Working height: approx. 6.5 m • Dead weight: approx. 1,700 kg • Crane load capacity: up to 900 kg • Forklift function: lift height 1.8 m; fork load capacity 2,000 kg • Extensions: Fully hydraulic • Coating: KTL • Quick-change system from crane to forks • Engine: Honda Additional equipment • Trailer