9
Serial No. AII217083
Input 415/3/50hz 11 kW
Bozqw2nehh
Bar 7.5
CFM 78.8
PSI 105
Equipment 575 litre air receiver, MTA air dryer
Length 1200mm
Width 800mm
Height 1000mm
Nett weight actual. 820 Kgs.
1
11
Atlas copco Air compressor
Model ZR 250 E
Nf2fj7h
OIL FREE AIR
Electrical motors
Two (2) machines available for sale , Year : 2003 and 1997
Working Pressure : 7.5 bars
3
Technical characteristics
Integrated dryerSound proofTank / Vat
Hxbp87f8o
NEW state
1.84 hours of functionning
300 L air tank
PF6 filter and automatic purging Debit / Rate of air flow: 33 m3/h Power and Motors
Motor: 4 CV Overall dimensions
3
year 2009 (air delivery 1,44 m³/min.; max. operating pressure 13 bar, 11kW, 26 kg), year 2011 (8 bar, 1700 l/min, 11kW, 400V), year 2017 (filling capacity 435 l/min., final compression pressure 10 bar, 400V, 4 kW)
E3kpbz3
for sale individually or together
6
Set of 2 CompAir D90 8W compressors, water-cooled, two air filters, two CompAir F156cs + dryers, 5000l buffer tank,
Jwlihi
Smart Master Air control system production installation.
Set of Documents + service protocols
Mileage 11,000 MtH
Capacity of one compressor: 16.3 m3
1
We are looking for used Atlas Copco, Kaeser, Boge and CompAir screw compressors and air dryers.
Ekcqdkp
3
Max. Pressure 8 bar 290 cum m / min - 162 kwa
year of construction 1998 - in very good order for sale
S2k7w8i
2
We offer a new and used screw compressors, air dryers, line filters, air tanks, pneumatic components, air cylinders, and compressor maintenance and spare parts.
Compressors available in 2.2kw - 500kw.
Clra9j7
The compressors we sell are ALL maintained and in good condition.
All compressors have a warranty of at least 2 months. We sell only quality brands such as Alup, Kaeser, Atlas Copco, Compair, Ceccato, Almig and so on.
If you are interested please feel free to contact us!
6
Extraction, oil mist separator AFS (Air Filter Systems) Type AFS 1100
Fog and smoke separator, filter system, oil mist extraction
Serial No: 3341 Year of construction 2001
Air flow rate - volume flow approx. 1100 m3/h
Suction connection Ø 200 mm
Exhaust air grille 440 x 140 mm
Engine power 0,5 kW
Mains connection 380 Volt, 50 Hz.
- 2 pcs. pre-filters made of wire mesh for cleaning
- 2 pcs. prefilter with exchangeable fleece
- 1 piece perforated plastic prefilter
- Main filter of wire mesh L x D ...
5
feed pressure 10 bar
Opr0vit
liter capacity 2.200 l/min
total power requirement 15 kW
weight of the machine ca. 0,4 t
dimensions of the machine ca. 1,3 x 0,8 x 1,2 m
Screw compressor with tank, dryer and carbon filter
- screw compessor (last big service 01/2020; 33.905 h)
- Tank 1.000 ltr., build: 1999, max 16 bar
appr. Ø 800 x 2.500 mm
- dryer Hertz HRD 220, 216 m3/h, max 16 bar
750 x 500 x 630 mm; 0,7 kw
- carbon filter (last service 01/2020)
650 x 400 x 1.000 mm
5
Paddle mixer , Make Dynamic Air (USA), Type Bella B320E-XN, No. 1096976, Year of construction 2009, Material Stainless steel 1.4404 (316L), Double shaft , Useful capacity 320 ltr, Trough sizes 1325x1105x850mm, With cover (2x), Inlet dia. 260mm (1x) dia. 115mm (1x) dia. 100mm (1x), Outlet 1200x160mm (2x), Glands air purged , Motor 15 kW 380-420/660-725 volt (2x), Speed mixing shaft 112 rpm, Floor space 2,6x1,4 M, Total height 1,7 M, Weight 1000 Kg, CE , This Fluidized Zone Mixer features an origi...
6
Hot Foil Stamping machine AIR HYDRAULICS AH
Year 2006 - Serial-No. AH 930002
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
-Can be inspect-
-On Stock Emskirchen / Nürnberg - Can b
Str2nw
3
Catalog No. : 5292
Type: PLASMATOME 25
Producer: SAF Air Liquide
Ft23xu2
Made in: 2004
Characteristic:
Length of the working table: 12000 mm
Width of the working table: 2000 mm
Table height: 700 mm
Maximum thickness of the cut sheet metal: 150 mm
Cutting speed: 15 m/min
Equipment:
NETRAJET HP 120 tilting head
CNC DIGISAF 3.5
5
Centrifugal fan, paint mist extraction fan, fan, extraction fan, blower
-Motor power: 1.1 kW
-Speed: 2760 rpm
-Max. Volume flow: approx. 1,900 m³/h
-Max. Pressure: - kp/m²
-Connection input: Ø 300 mm
Q9wnkla
-Connection output: Ø 300 mm
-Impeller: Ø 310 mm
-Connection: 400 volts
-Number: 3x available
-Price: per piece
-Dimensions: 900/630/H660 mm
-Weight: 64 kg
4
Coolant mist extraction
Bpptnoucsr
7
feed pressure 13 bar
liter capacity 3,6 m³/min
Number of working hours h
voltage 400 V
total power requirement 30 kW
weight of the machine ca. 0,95 t
Boxvmx3mmg
dimensions of the machine ca. 1,1 x 1,0 x 1,7 m
- Serial-No.: F1005979 / S0009582
15
5
Condition Used
Bnvu8o0y
Listing name AIR LIQUIDE Arpege 40 Liquid Nitrogen Storage Vessel
2008 40L liquid nitrogen storage vesselSELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’.ID: FFTF077
6
Jogger Schuster RW
Year ca. 1992 - Serial-No. -
Size 900 x 1150mm
Bi0gy2dmbn
mobile, tiltable
height adjustable
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
-Can be inspect-
5
Respiratory protection filter
-Clean AIR: basic 2000
-P SL R Art. No.: 80 00 10
-Price: per piece
-Number: 17 pieces
-Dimensions: Ø 131/54 mm
-Weight: 0.1 kg/piece
Be2whotnmy
12
Oil mist extraction electrostatic series F-V, volume flow 2000m3/h,
Gegapfkj
Was installed on a trade fair machine and not yet in operation.
12
ALNAT™ CRYO system
incl. Eurotherm NanoDac control
Year of manufacture 2014
Made in Germany
Incl. shelf system
Plant is currently still in operation and can be visited.
Cryogenic treatment at -180
For steels with carbon contents above 0.5 percent by mass, cooling to room temperature is not sufficient for complete transformation into the hardness structure (martensite) - residual austenite remains. Cryogenic treatment with liquid nitrogen enables controlled, complete microstructural transformatio...
15
Designed for welding with 15 PAW (Plasma) method without additional material
Used to weld individual sheet metal sheets together (to the strip) and to weld the seal welds of the tanks (to the twisted sheet)
Cc7d0kkq
Thickness of welded material 1-10 mm single-layer or multi-layer weld
Maximum weld length 3250 mm
Can be used for diameters from 380 to 1450 mm Plasma / TIG seamer benche
6
Machine type: Automatic longitudinal and circumferential welding machine CBMATIC LM 42 x 48 with welding system NERMATIC N450 DC PLASMA - TIG and roller self-adjusting positioner
Manufacturer: Air Liquide
Model: CB-MATIC LM 42x48
Year of production: 2018
Control system: Siemens Simatic HMI
Material thickness: 6 to 16 mm butt
Material: stainless steel
Specifications:
Vertical reach of the arm: 4200 mm
Horizontal reach of the arm: 4300 mm
Vertical arm speed (variable): 110 cm / min
Horizontal arm...
7
Air Liquide gas semi-trailer for liquid natural gas, LNG, methan,
Gas tank volume: 45 m3,
Stainless steel
Tara 12600 kg
Test pressure 9,5 bar
Cryogenic isolation for LIN, LOX, LAR, LNG
Ogeg9
We would also be pleased to prepare an offer for you or provide you with further information. To discuss the possibilities, please contact us by phone or e-mail. We speak German, English and Russian.
5
Pressure reducers, pressure regulators, manometers
-for oxygen
-Inlet pressure: max. 200 bar
S0yhevger
-Outlet pressure: 0 - 12 bar adjustable
-Number: 1x piece available
-Price: per piece
-Weight: 1.4 kg
9
RAPID 1528 Grinding machine
Manufacturer: RAPID
Type: 1528
Year: 2000.
Condition: used machine, excellent condition
Installed power: 2,2 kW
Volatge inquiry: 380V / 50 Hz/ 3 phase
Shaft lenght: 280 mm
Working area: 280 x 220 mm mm
Sieve: yes 5 mm
Control panel: yes
Emergency stop button: yes
Plug in: yes
Blades number: 4 x 4 pcs
Overal dimensions: 560 x 1000 x 1750 mm
Weight: aprx. 300 kg
Brplgz2rs8
Located in Hungary; can be seen and test in ou...
1
Sticker remover / caramel disc remover from Zionair, double sided tape remover on air pressure (LUCH-00147). revolutions = 4000 rpm diameter strip wheel = 87 mm air connection = 1/4 inch hose connection = 3/8 inch average air consumption = 4,5SCFM / 128 L/min working pressure = 6,3 Bar / 90 PsiPneumatic caramel disc machine , Caramel machine , Striping remover , Sticker remover. This tool is used in garages for stripping paint and removing stickers etc. The housing is made of lightweight alumi...
10
MITSUBISHI - Air Conditioner
PUHZ-ZRP71VHA
230 V
50 Hz
Suffjs
used / used
Please note the photos
Please look at the pictures. Important!!!
Net weight / net weight: 120 kg
X748
4
Machine type: Automatic longitudinal welding machine SEAM-MATIC INTER 32 with welding system NERMATIC N450 DC PLASMA - TIG
Manufacturer: Air Liquide
Model: SEAM-MATIC INTER 32
Year of production: 2018
Control system: Siemens Simatic HMI
Material thickness: max 10 mm butt
Material: stainless steel
Specifications:
Weld length: max. 2,860 mm
Internal welding: 1,450 mm
Thickness without stitching: 1 to 5 mm
Stitching thickness: 1 to 10 mm
Jaw opening: 10 to 30 mm
Theoretical height of the gap with ...
1
This universal abrasive is extremely suitable for the removal of paint layers, rust, roughening and matting. Corundum aluminum can be used with pressure- and injection blasting systems.
Cdddyjke
5
Digestorium exhaust system for pharmacies, chemistry and medicine
-Interior dimensions: 540/850 / H900 mm
Ikgjfpn
-Stainless steel version
-Glass door front
-With Camfit filter cartridge
-Connection: 0.085 kW
-Type suction: EB 225
-with extractor hood
-Dimensions: 675/900/H1200 mm
-Weight: 100 kg
7
AIR LIQUIDE PLASMA - ALPHATOME 30 - 2005- system HP digital process- plasma Nertajet HP 125- cutting width 3000 mm (for one cut piece)- cutting thickness max 50 mm- table length 12000 mm- under power- including exhaust
Bi7bg8nv33
1
Paint sprayer brand Zionair, W200 , 2mm, under cup, professional (LUCH-00163). Cup capacity = 1000ml Air pressure = 2 bar Air consumption = 270 l/min Liquid output = 180 - 330 ml/min Air connection = 1/4" Hose connection = 3/8" Flowsystem = Suction Top quality with stainless steel needle and nozzle, Nozzle sets available in sizes: 1.8 mm (LUCH-00272)Below is a category overview of all air tools sold by Trailer and Tools. By clicking on the name of the category you will see below which compressor...
3
Omega Air refrigeration dryer. OMD 410 / AC, 410 m³ / h.
Bjtl38ujw9
7
AMS LED-UV curing system, consisting of 2 lams, 2 controllers, 4 fitting places, chiller, installed on Roland 500, can be used in other B2 size machines. Very little used, about 100h of work. One lamp can be sold separately.
Bn3bvkhto3
1
Sandblast gun for large sandblasting cabinets
Dmk3y2d
5
Air cushion or air cushion bags are characterized as particularly space-saving and clean packaging. Fill-Air air bag packaging systems feature a variety of fast, easy-to-use systems that deliver air-filled cushions on demand. They offer excellent protection and efficient cavity filling while at the same time reducing material and shipping costs. -Weight: 32 kg
Qk8vbm3qg
12
More pcs in stock!
Print resolution
8 dots/mm (203 dpi)
12 dots/mm (300 dpi)
24 dots/mm (600 dpi)
Print speed
Up to 400 mm per second
Tamp sizes (mm)
Tamp-Blow standard of
12.5 x 7 to 160 x 300 mm,
label lengths must be limited in accordance
with label quality, longer or smaller labels are
possible using special tamps
Label gap
Minimum 3 mm
Label roll
300 mm diameter, up to 450 running meters,
core 76 mm (3"), outside winding
(optional inside winding)
Inrtt0y
Data interfaces
RS232, RS422, RS...
1
Tire pump, Tire gun, Tire filler 12 bar, Zionair (LUCH-01900).Tire pump / tire gun / tire gauge / tire blower / tire filler / tire pressure gaugeThis solid tire pump is ideal for easily filling and deflating your tires. Pressure gauge diam. = 63mm Max. working pressure = 12bar (170psi) Pressure readable from 0.1bar Length of filling hose = 320mm Ergonomic designBelow is a category overview of all air tools Trailer and Tools sells. By clicking on the name of the category, you will see below which...
6
Max. Operating pressure: 10 bar
effective delivery rate at approx. 7.5 bar: 450 l / min
Required drive: 1450 rpm, 4 kW
Drive motor: 380/660 V, 1440 rpm, 5.5
Air chamber volume: 250 l
Required space: 1500 x 600 x 1320 mm
Ppwmuohj
Weight approx .: 250 kg
3
Sealed Air , model : Fill-air NTS the fast, easy-to-use packaging system designed for continuous use in your packaging line Application Fill-Air NTS the continuous roll of air bags is perforated and can be used for various applications such as Filling empty top space Filling around the product Filling empty top and side space Filling between products Excellent protection Provides optimum protection with minimum material usage. Your products are safely and securely protected, surrounded by Air B...
1
Belt driven two cylinder Air Compressor.
Ceegkzzt
5
Air cushion or air cushion bags are characterized as particularly space-saving and clean packaging. Fill-Air air bag packaging systems feature a variety of fast, easy-to-use systems that deliver air-filled cushions on demand. They offer excellent protection and efficient cavity filling while at the same time reducing material and shipping costs.
Qk8ux2w3f
-Weight: 42 kg
11
Plasma Kjellberg HiFocus 160i
1x plasma
1x oxy-fuel
Working table 2950x3050 mm
Control Digisaf 100
Extraction unit Kemper 8000
Year of construction: 2000
Available: 01/2021
Bpazjc9qdt
Machine can be inspected under power
Video available on request