Used other paper, cardboard, or foil processing machines for sale (46)

Condition: good (used), Year of construction: 2000, Brand: Cevenini ED400 Year of manufacture: 2000 Technical data: Max. log width: 1600 mm Max. roll diameter: 400 mm Min. slitting width: 3 mm Indexing tolerance: +/- 0.1 mm Accessories: - 1 knife - 1 spraying unit - 1 shaft D 76 mm - 1 knife sharpening device - 1 set of original documentation Gujdpfx Aaoy A S Rme Ssa The machine was completely overhauled 5 years ago. New Siemens control system with visualization.

Condition: new, Pulper for waste paper * Volume: 12 - 14 m3 * Capacity: 100 T / 24 hrs Guodjxdlc Aopfx Aa Soa * Density: 4.0 / 5.0 % * Power: 132 kW / 750 rpm

Year of construction: 1980, condition: ready for operation (used), Various small machines from a packaging factory are available. 1) Multi-spindle paper drilling machine Constanting Hang 106MK/8, year of manufacture: 1980, drilling spindles: 8, drilling range: 3mm-8mm, hole spacing range: 36mm-630mm. Documentation available. 2) Vibrating table Müro 70x72 ST, paper dimensions X/Y: 700mm/450mm, max. stack height: 100mm, weight: approx. 50kg. 3) Small extraction unit Kongshilde TRL 40, year of manufacture: 2023, machine dimensions X/Y/Z: approx. 900mm/1000mm/950mm. 4) Conveyor belt, year of manufacture: 2018, belt height: approx. 970mm, belt dimensions X/Y: approx. 2300mm/600mm, machine dimensions X/Y/Z: approx. 2400mm/950mm/1050mm. An on-site inspection is possible. Only a package sale is possible. Guodpey Aaffofx Aa Sea

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. Gujdpoyx Uy Ajfx Aa Sja • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Year of construction: 2021, condition: used, Max paper size: 760 x 520 mm Min paper size: 320 x 260 mm Max die-cutting size: 750 x 510 mm Max stamping size: 740 x 500 mm Feeder pile height: 1280 mm Delivery pile height: 1100 mm Max speed: 9000 sheets/h Pressure: 250 T 8 independent heating zones Gusdoy Anl Hopfx Aa Sea Power: 38 KW Weight: 14 tons

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, Coating, laminating – additional unwinder for lamination Corona treatment – during coating of film with water-based dispersions Working width – 1700 mm Coating speed – 0–100 m/min Material in rolls Raw material – paper (50–300 g/m²), film (0.023–0.10 mm) Substances – solvent-based adhesive, water-based adhesive Type of coating – coating head: Mayer rod, anilox roller, slot die roller Dryer – length 18 m, 7 drying sections, temperature 30°C–170°C, gas drying (blower) Roll diameter – max 1400 mm Machine includes hot air generator Godpexwaiksfx Aa Soua Detailed description available on request.

Condition: used, Straightening machine, strip straightening device with adjustable LENZE geared motor Straightening machine, strip tensioner was used for cardboard approx. 350 x 1.5 mm Not suitable for use as a classical straightening machine Type 11.712.02.10 Output speed of geared motor: 12 to 72 rpm, stepless Torque: 80 to 40 Nm Straightening roller speed: 19 to 115 rpm Straightening roller width: 520 mm Straightening roller diameter: 90 mm Total number of straightening rollers: 4 pcs Motor power: 0.37 kW Power supply: 380 Volt, 50 Hz - Pull roller pair, drive of the lower rubber-coated roller via open gear drive - Speed infinitely adjustable via handwheel on the geared motor - Upper part of the straightening rollers mechanically adjustable - Straightening unit with 3 rollers, one of the rollers is missing (rollers of the straightening unit not driven) - On a sturdy metal base Gjdpedzp U Aofx Aa Sjua - Straightening machine was used for cardboard approx. 350 x 1.5 mm Space requirement (L x W x H): 630 x 460 x 1060 mm Weight: approx. 160 kg Good condition

Year of construction: 1996, condition: good (used), machine/vehicle number: 818, Standard Machine Paper Weights Min. : 60 g/m2 Paper Weights Max. : 250 g/m2 Speed : 15.000 pcs/hour Max. Size : 1040 x 740 mm Gjdpfx Aaofh It Ee Seua Min. Size : 520 x 450 mm

Condition: good (used), Roller glue application machine, laminating machine, laminating system, laminating system, layering machine Gujdeirnwbjpfx Aa Sja -Manufacturer: Hymmen, glue application machine, layer machine type 36 -Working width: 1300 mm -Roll diameter: Ø175 x 1300 mm / Ø235 x 1300 mm / Ø85 x 1300 mm -Individual components: see photos -Dimensions: 2230/1100/H1410 mm -Weight: 1260 kg

Condition: ready for operation (used), optionally in combination with an oval riveting machine of the same brand/age; see our other advertisement Gujdpfx Aajx Nfhls Sja

Condition: ready for operation (used), In use from 1991 until it was last used and has been little prone to problems despite being a 1990s Chinese punching and riveting machine for oval eyelets. Gujdpfx Aaex Nd U Dj Ssa

Year of construction: 2009, condition: used, Two-colour rotary flexographic printer with integrated slotter and stacker. TECHNICAL DATA: Year of production: 2009 Factory number: 0904K02 Max speed: 70 pcs/min Economical speed: 50 pcs/min Max. sheet: 3000 x 2000 mm Min. sheet size: 600 x 350 mm Max. print: 2900 x 1900 mm Cardboard thickness: 2-10mm Film thickness: 4-7mm Axial correction: ± 8mm Max slot length: 350mm Slit width: 7mm Gusdpfshbvq Hjx Aa Sea Main motor: 7.5 KW Total power: 15 kW Overall dimensions: 6000mm x 3050mm x 1900mm Weight: 28000 kg DESCRIPTION: Includes commissioning, technology, training, start-up warranty.

Year of construction: 2015, condition: excellent (used), functionality: fully functional, machine/vehicle number: 69611, Awex carton stripper with compressed air Gsdpfx Aajwl N Ihe Seua

Condition: ready for operation (used), Sheet format: 100-1000x40-1120mm, max. carton thickness: 20mm, output carton/ paper: 7-60/ 7-40 sheets/min, weight: 1t, with pressure belt and sheet laminating station, including documentation. Gsdpfx Aaeihp Nfs Soua

Year of construction: 1978, condition: ready for operation (used), Suitable for PVC films, working width: 940mmm, welding power: 42kVA, welding area: 940x720mm², throughput: 400 cycles/h, length: 8000mm. Gjdpoqu Ubuefx Aa Seua

Year of construction: 1965, condition: ready for operation (used), Suitable for the production of rigid PVC films with a minimum plasticizer content of 3%, number of rollers: 5, with documentation, retrofit 2003 and 2017. Gsdpsquu Ttsfx Aa Sjua

Year of construction: 2016, condition: good (used), Coating head with unwinder. Application: coating with water-based acrylic adhesives. Gujdpjyf Ebijfx Aa Sea

Year of construction: 2012, condition: ready for operation (used), A Roll-o-Matic bag production line for bottom-sealed film bags is available. Bag length range: 360mm-1800mm, max. bag width: 860mm, max. production speed: 90m/min, max. cycle rate: 230/min, material: PE LD/PP, max. film thickness: 70µm. Machine dimensions: approx. 4100mm/1600mm/1700mm, weight: approx. 1600kg, control system: Siemens PLC. Documentation available. On-site inspection possible. Guedpfx Ajxrf I Usa Soa

Condition: ready for operation (used), Year of construction: 2019, An AFS printing, laminating and coating system (corona pre-treatment) is available. Roller width: 2700mm, electrode width: 2500mm, max. mechanical speed: 250m/min, max. generator output: 6kW, operating mode: 1- and 5-core operation, electrode material: ceramic, discharge roller: ceramic, cooling type: water-cooled, pressure rollers: both sides. Documentation available. On-site inspection is possible. Godevrip Hspfx Aa Sjua

Condition: good (used), continuous welding machine, film welding machine -Manufacturer: Rische, continuous welding machine film welding machine Polystar -Type: Polystar 350/5 DSM-TE -Voltage: 220 V -Technical data: see photo type plate -Dimensions: 520/250/H5600 mm -Weight: 12.1 kg Gsdpfx Aevyq Duja Sjua

Condition: used, Collar cutting machine, trim, trim collar, shirt collar, shirt production, shirt, pneumatic, textile production, textile machine, garment production, garment production -Kannegiesser System: BRILKA -Kannegiesser: cut and twist collar. -pneumatic: foot switch Guodpfx Aof D Az Nsa Sja -Dimensions: 520/900/H1190 mm -Weight: 33 kg

Condition: good (used), roller glue application machine, laminating machine, laminating system, laminating system -Manufacturer: VEB Jonsdorf -Type: LAM 1300 -Working width: 1300 mm -Number of rolls: 4 pieces -Roll diameter: Ø235 x 1310 mm / Ø170 x 1310 mm -Connection value: 2.2 kW -Dimensions: 2470/1000/H1390 mm -Weight: 1300 kg Guedpjranl Tefx Aa Sea

Condition: good (used), functionality: fully functional, Paper production line consisting of stock preparation, paper machine, inline coaters, offline coater, calander, reeler, offline calanders and slitter winders. Various updates including headbox, top former, press section, offline coater, Voith speedsizer, Voith jet coaters and steambox & ceramic rolls. Characteristics: Capacity: max ~ 240000 T/pa Width: 4800 mm Grammage: 40 – 170 gr/m2 Speed: max 1165 m/min Gedpfxovptqio Aa Ssua

Condition: good (used), functionality: fully functional, Paper production line consisting of stock preparation, paper machine, inline coaters, calander, reeler, offline calander, slitter winders and reel packer. Fully upgraded by Valmet in 2019, including formmaster, topformer, shoepress, pre-dryer section, inline coating, multinip calender and reeler. Characteristics: Gujdovptbuopfx Aa Ssa Capacity: max ~ 350000 T/pa Width: 7500 mm Grammage: 35 – 170 gr/m2 Speed: max 1400 m/min

Year of construction: 1988, condition: good (used), machine/vehicle number: 11801, Gietz FSA 720 Foil/stamping embossing press. size 720x520 mm, minimum sheet size 297x210, Double sheet detection, pressure 120 t, max speed 5000 sheets/h, pile height 950 mm with max 700kg, pile height on delivery 700mm, dimensions of the machine 380x280x195 cm Machine no: 11801 Guodpfewnqrgsx Aa Ssa