Used Double reel for sale (7,170)

Call

Condition: good (used), Machine number: 11310/17 Type / Model: MHD 250/2 take up: 450 to 550 mm 9icop0xx9x Circumference max.: 1.200 mm Base plate diameter: 600 mm width: up to 250 mm coil weight max.: 1,6 t Motor speed: Connection: Speed: Accessories/equipment: Condition: good weight: 0,92 t adjusting plate: 1.250 x 1.250 mm dimensions: 2.000 x 1.400 x 2.000 mm

more

Listing

THYSSEN UNFORMTECHNIK STEEL DOUBLE SIDE TANK 6616-D

Berkel en Rodenrijs

7,176 km

Fuel tank

THYSSEN UNFORMTECHNIK STEEL DOUBLE SIDE TANK 6616-D

€2,700

clam shell bonding machine

Call

Condition: used, Year of construction: 1990, Year of manufacture: Sep 2000 Iphpescbl No guarantee. Please contact us if you can't find what you are looking for.

more

Listing

Poznań

6,331 km

Carton Erecting Machine double track GPS 1600

Call

total width: 185 cm, total length: 360 cm, total height: 170 cm, overall weight: 2,800 kg, Condition: new, Year of construction: 2023, Carton Erecting Machine (paper box forming machine) is an automatic machine, specialized in making food carton, box, container which are made from cardboard, paper, paperboard, corrugated paper etc. The food box (carton, container, dish, tray) is widely used as burger box, hot-dog box (tray), one block box, food pail box (Chinese food box, take-away box), fries box (chips box, chips tray), lunch box, meal box, etc. Machine advantages: 1. Servo motor control the forming mold (press mold). 2. Using full servo system - 4 servo system - two servo motors for paper feeding, one servo motor for paper sending, one servo motor for molding. 3. Easy exchange molds to make different products. 4. PLC program controls the whole line, available to make complicated boxes. 5. Automatic collection, stock, and count. 6. PLC can save the adjusted parameter. 7. Possibility to run only single lane. 8. Two collection units are also independent. 9. High feeding precision thanks to vibrator installed in the feeding part. Technical specification: Speed: 100~320 box/minute (speed depends on paper blank size, box shape, material and its quality) Gluing method: water-glue system Material: 200~620gsm board, paperboard, paper, corrugated cardboard, fluted paper, etc. Material Thickness: Max. 1.5mm Paper Size: L=Length: 100-450mm W=Width: 100-550mm H=Height: 15mm-320mm Angle: 5~50 degrees Total Power : 5KW Weight 2800KG Bhg2l2cmj7a Machine Size (L*W*H) 3600*1850*1700 mm Power Source 3-phase, 380V, 50/60Hz Air Source Compressed air at 6-10 bar needed

more

Listing

Misterton

7,523 km

Rack oven

Double D Rack Oven

Call

Condition: good (used), Double D Rack oven Bpzjajsj 2006, stainless, single rack oven, timer and temperature controls, with fan and light, 45Kw, 3Ph

more

Listing

Double bench grinder Double bench grinder

Pesaro

6,552 km

Double bench grinder

Double bench grinder Double bench grinder

Call

Condition: excellent (used), Double bench grinder Cug7ebjvty

more

Listing

Haaksbergen

7,021 km

Screw Pump for Fly Ash

REEL MÖLLER 18-18.2-180

Call

Condition: as good as new (ex-display), Year of construction: 2018, Operating hours: 0 h, Screw Pump for Fly Ash Make: Möller H9yaialmd Type: 18-18.2-180 Capacity : max 20 Ton per hour Height 30 mtr Material Carbon Steel Weight 1500 kg

more

Listing

Kłodawa

6,452 km

Angle saw, double-cutting saw for aluminium

Angle saw, double saw for aluminum, KS 101

Call

Condition: excellent (used), Year of construction: 2000, Miter saw, double saw for aluminum, Miter saw, double saw for aluminum, Urbllc3 PVC, wood of the renowned brand ELUMATEC KS 101. For cutting frames, frames, slats 250mm discs 12177

more

Listing

DOUBLE ACTING COUNTER BALANCE VALVE VBCD 1/2'' DE - A

Berkel en Rodenrijs

7,176 km

Valve

DOUBLE ACTING COUNTER BALANCE VALVE VBCD 1/2'' DE - A

€150

2 rack multi purpose cooker

Call

Condition: new, Empty weight: 2 kg Bb22kn89azm Not tested. No guarantee. Please contact us if you can't find what you are looking for.

more

Listing

JBT Double D. Revorack Multi-Purpose Oven

Chapel Pond Hill, Bury Saint Edmunds IP32 7HT, UK

7,428 km

JBT Double D. Revorack Multi-Purpose Oven

Call

Condition: like new (used), Rotary 2 rack (racks for 18" x 30" trays) multi purpose oven / protein cooker. Previously used for cooking duck meat but can be used for fish, meat, vegetables and ready meals. Can cook with steam only, steam and elevated temperature, dry roast and bake. These are the industry standard in UK ready meals factories. Fjrnyfzfp

more

Listing

Karlholmsbruk

6,477 km

Conveying Machinery

Board double elevator

Call

Condition: used, Double board elevator - boards up to 6 m - electric motor 2,2 kW Cipz8xmgh0

more

Listing

Berkel en Rodenrijs

7,176 km

Valve

DOUBLE ACTING COUNTER BALANCE VALVE VBCD 1/2'' DE - A

€150

2 rack multi-purpose oven protein cooker

Call

Condition: new, Empty weight: 2 kg Not tested. No guarantee. Please contact us if you can't find what you are looking for. Yowispxe

more

Listing

Chapel Pond Hill, Bury Saint Edmunds IP32 7HT, UK

7,428 km

JBT Double D. Revorack Multi-Purpose Oven

Call

Condition: good (used), Rotary 2 large rack (1m x 1m x 2m) multi purpose oven / protein cooker. Previously used for cooking poultry meat but can be used for fish, meat, vegetables and ready meals. Can cook with steam only, steam and elevated temperature, dry roast and bake. These are the industry standard in UK ready meals factories. Wuqxsfd

more

Listing

JBT Double D 2 rack (18 x 30) bakery oven

Chapel Pond Hill, Bury Saint Edmunds IP32 7HT, UK

7,428 km

Rotary rack oven

JBT Double D 2 rack (18 x 30) bakery oven

Call

Condition: like new (used), JBT Double D 2 rack rotary oven. Takes 2 x 18 x 30 racks. Very clean and tidy. For bakery use. B9ksqmgz0g

more

Listing

769Q+FQ Leominster, UK

7,665 km

Chargrill/flame searer

JBT Double D Revoband Char Grill

Call

Condition: excellent (used), Year of construction: 2014, JBT Revoband Char Grill rotary brander. 1m wide belt, two stage flame grill searer (gas fired) with floating rings style barmarker to put barbecue burn lines on meat products, vegetables like sweetcorn, courgettes, peppers, fish, breads etc. This machine is in excellent condition, it was bought new in 2014 for a project that didn't take off and then was mainly used just as a conveyor (hence the photo just showing fried products going through it with no gas running) until the factory closed in 2016. New cost of this machine was £168,000 9eunihpo0g

more

Listing

San Giovanni Al Natisone

6,515 km

5 AXIS CNC WORKING CENTER

BACCI DOUBLE

Call

Condition: used, Year of construction: 2002, machine/vehicle number: AB004, SECOND-HAND 5 AXIS CNC WORKING CENTER BACCI MOD. DOUBLE - X= 2400mm ; Y=650mm ; Z=1000 - N. 2 heads type T2 - Spindle power 7.5Kw - Rpm 0 - 18.000 - Max/min pieces length 150/2400mm - Loader type CSF2 - Year 2002 Liy07dwnvz - S/N AB004 - Complete with manual and CE declaration

more

Listing

China

2,987 km

Automatic Double side Labeling machine

KRAFT VM-3225 | VM-4225 | VM-5225

Call

Condition: new, :VM-3225 | VM-4225 | VM-5225 x-travel:3200|4200|5100 mm y-travel:3000/3400 mm z-travel:800/1000 mm distance spindle nose and table:235~1235 mm distance between columns:2550/3050 mm table-size:3350x2200|4350x2200|5350x2200 mm table load:15|18|21 t T-slot (width-distance-quantity):28x250x13|28x250x17|28x250x21 mm spindle cone:50 BT/SK spindle speed:6000 (opt.10000, 15000) 1/min spindle drive:22/26 kW Spindle motor torque:560/662 Nm (bei 10000 1/min: 140/165 Nm) rapid traverse in x-y-z axis:15/18/10~15|12/18/10~15|12/18/10~15 m/min feeds:1~8000 mm/min Tool changer:32 -fach workpiece length:350 mm tool diameter:110/225 mm weight of tools max.:20 kg positioning accuracy:0,025|0,030|0,040 mm repeating accuracy:0,02|0,025|0,030 mm total power requirement:60 kva machine length:10125|12035|14035 mm Cqzevtcc machine width/height:6840x4515 mm Weight approx.:40|45|50 t automatic tool changer:32 fach CNC controller:Siemens/Fanuc/Heidenhain chip conveyor with chip bucket:2 Stück CNC controls from:Siemens/Fanuc/Heidenhain linear scales:HEIDENHAIN/FAGOR CTS:20/30/40 bar different kind of milling heads:s. Anlage Neo tool measuring system:RENISHAW ATC:60/90/120 workpiece measurement system:RENISHAW

more

Listing

MQ3P+7C5 - Al Jazeera Al Hamra Industrial - Ras al Khaimah - United Arab Emirates

2,435 km

Indian Make

US$16,000

EXW ONO plus VAT

Call

Condition: new, Year of construction: 2016, We are glad to inform you that we would like to sell the Brand-new machine (Double side Labeling machine) which we purchased but unfortunately never used, for some reasons: Technical specification:- Speed : 30 to 35 p/m. Conveyor Drive : Synchronized Power Required : 2hp Machine Dimensions : 2450 L x 1550 W x 2150 H Power :230 VOLTS. (SINGLE PHASE) AC 50 Hz. Input Specifications : Label Height : 10 mm to 160 mm Label Length : 12 mm to Unlimited. Gap between Two Labels: Minimum 5 mm. Label Roll Die : 300 mm Maximum. Label Core Die : 75 mm. Material used :S.S. – 304. Conveyor Belt :S.S. – 304 – 8 feet Bffdbm8rxr9 Machine specification:- - Labeling Capacity : 30 to 35 Vials/Bottles per min - S.S. GMP Model. - Programmable controller unit – Standard – like (DELTA). - Imported sensor for label & container (STANDARD). - AC Frequency drive for conveyor & pressing device (ALLEN RADLY/DELTA) - Gear box & Motors are imported. (BONFIGLIOLLI/ROTOMOTIVE MAKE). - Total synchronized with stepper motor and ac motors . - In-built speed indicator & counter. - Pressing unit for round container labeling. - No bottle No labeling system.

more

Listing

대한민국 대구광역시 중구

5,097 km

double housing planer

SNK RB-5VM

Call

table length: 5,000 mm, motor power: 22,000 W, workpiece weight (max.): 15,000 kg, rapid traverse Y-axis: 20 mm/min, spindle speed (max.): 6,000 rpm, table load: 15,000 kg, table width: 2,500 mm, travel distance Y-axis: 2,900 mm, travel distance Z-axis: 2,300 mm, Condition: good (used), Year of construction: 2016, RB-5VM with Fanuc-31i-B. Distance from spindle end to Table surface:300-2300mm. Thixmzz0o AAC-3sets. ATC-40ea.

more

Listing

Slovenia

6,393 km

Coil Reel & Straightener

KOHLER 18-120/19

Call

Condition: used, Year of construction: 1990, CONTROLS .. PLC SIEMENS S5 100 U DECOILER .. sheet width max: 120 mm Bim0h8om8zv LEVELLER UNIT .. number of leveller rolls: 19 2 x machines

more

Listing

Hisar, Bursa Yalova Yolu No:7, 16600 Gemlik/Bursa, Türkiye

5,179 km

DOUBLE TABLE CNC VERTICAL MACHINING MACH

AKIRA A 650

€30,500

EXW Fixed price plus VAT

Call

Condition: used, Year of construction: 2007, AKIRA A-650 FANUC Oİ-MC DOUBLE PALLET X AXIS 600 Y AXIS 300 Bgacp9h0lri Z AXIS 400 ATC ARM TOOL CHANGE (24 PACK MAGAZINE BUT THERE ARE LACKS) WITH CHIP CONVEYOR

more

Listing

Kiew

(dealership location)

5,374 km

Reefer/Isolated/Freeze

Schmitz Cargobull Reefer Standard Double deck Side door both sides

€40,000

Fixed price VAT not applicable

Call

mileage: 3,93,720 km, year of first registration: 2,016, month of first registration: 2, overall weight: 39,000 kg, axe configuration: 3 axles, maximum load weight: 30,200 kg, empty load weight: 8,800 kg, tire size: 385/65 r22,5, suspension: air, loading space volume: 88 m³, loading space width: 2,490 mm, loading space length: 13,410 mm, loading space height: 2,650 mm, Condition: used, Year of construction: 2016, machine/vehicle number: 5900859, Tare weight: 8800kg, GVW: 39000kg, Side door both sides, Loading area (L W H): 13,410 mm x 2,490 mm x 2,650 mmTyre size: 385/65 R22.5, Loading area volume: 88 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Electronic Brake System EBS, Double deck, 1x15 pin plug, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Uisyjx7u

more

Listing

China

2,987 km

KRAFT VM-2018 | VM-3018 | VM-4018

Call

Condition: new, :VM-2018 | VM-3018 | VM-4018 x-travel:2300|3200|4100 mm y-travel:2000 mm z-travel:800 mm distance spindle nose and table:180~980 mm distance between columns:1840 mm table-size:2300x1600|3200x1600|4100x1600 mm table load:8|10|12 t T-slot (width-distance-quantity):22x180x8 mm spindle cone:50 BT/SK spindle speed:6000 (opt.10000) 1/min spindle drive:15/18,5|22/26|22/26 kW Spindle motor torque:560/662 Nm (bei 10000 1/min: 140/165 Nm) rapid traverse in x-y-z axis:20/20/15|20/20/15|15/20/15 m/min feeds:1~10000 mm/min Tool changer:32 -fach workpiece length:350 mm tool diameter:110/225 mm weight of tools max.:20 kg positioning accuracy:0,020|0,025|0,03 mm Bp3d807msr repeating accuracy:0,015|0,020|0,025 mm total power requirement:60 kva machine length:7027|8927|10327 mm machine width/height:5217x4339|5217x4339|5217x4339 mm Weight approx.:22|26|30 t CNC controller:Siemens/Fanuc/Heidenhain CNC controls from:Siemens/Fanuc/Heidenhain

more

Listing

Avižieniai

5,862 km

Reel

1250 X 3T

€1,000

Call

Condition: used, In excellent condition. For unwinding sheet metal. Specification: Width: 1250 Cultikbxey Diameter: adjustable 500 - 600 Weight up to: 3 T If you have any further questions, we will be happy to answer.

more

Listing

Renault Maxity 120 DXI mit Multitel M160 Alu

Oelsnitz/Vogtl.

6,633 km

Double cabin

Renault Maxity 120 DXI mit Multitel M160 Alu

€28,900

Call

Condition: used, Year of construction: 2014, machine/vehicle number: 3776-N1, ABS ,Central locking Renault Maxity truck-mounted work platform with Multitel M 160 ALU superstructure, * Self-propelled work machine, Sqekrw8sa * First registration 03/2014, * Mileage 23800 km according to meter read, * Operating hours 2368 according to meter readings, * Max. working height 16.2 m, * platform height 14.5 m, * max. lateral reach 10.2 m with 80 kg, * 2 telescopic design, * 4 cylinder diesel engine with 90 KW / 122 HP, * displacement 2488 cm³, * 5-speed manual gearbox, * Single cab with 2 seats, * Tire size 195/70 R 15C, tread 3-6 mm, * Wheelbase 3400 mm, * Wheel formula 4x2, * Overall dimensions in length x width x height 6692 x 2080 x 2780 mm, * Total weight 3500 kg, * Unladen weight 3450 kg, * Basket load 200 kg, * Basket dimensions in length x width 1150 x 690 mm, * Hydraulic 4-point outriggers, * Outrigger dimensions in length x width 3450 x 2100 mm, * 230 V in basket, basket rotatable, basket and floor control, * ABS, auxiliary drive, remote start-stop, rotating beacon, power steering, further data and pictures on request, this description is not a binding offer and may contain errors, no guarantee on all information ID 3776 Further offers under

more

Listing

Germany

6,760 km

Scraper

Caterpillar 627F "Auger - Double Engin System"

€2,01,600

DOUBLE CROSS CUTTING MACHINE A COSTA

Call

Condition: used, Year of construction: 2000, Operating hours: 8,324 h, machine/vehicle number: 1DL00795, We are ACCEPTING OFFERS for this unit! Buying with Equippo is easy: • Fully inspected machines • Delivered to your jobsite • Money Back Guaranteed 2000 - Caterpillar - 627F "Auger - Double Engin System" | Used Scraper with 8324 hours in good condition. Our expert inspector checked 40 inspection points - 39 were approved, 1 showed imperfections, 0 presented issues. Buy it now for EUR 201.600 or make us an offer. We can deliver from Boulazac Isle Manoire, Frankreich to your destination. You can estimate the cost using our price calculator. Autocharger, Twin engines, Auger mechanism - see attached document, the bawls are double lined with Teflon. This machine can be sold in a combined deal with another Caterpillar 627 F. Contact us to give the special price for this amazing deal. CE marked: Yes EPA marked: No 40 Inspection points 39 Approved 1 Imperfections 0 Issues Dkdglz Contact us for more information and a FULL INSPECTION REPORT with detailed pictures and videos and the final price including delivery to your location. Questions? Our sales agents speak 13 languages. Are you looking for more equipment? We can help you find used tracked excavators, used mini excavators, used wheel loaders, used single drum rollers, used telescopic boom lifts, used articulated boom lifts, used scissor lifts, used telescopic forklifts, used crushers, used screens and more. Our stock includes leading brands such as: Caterpillar, Komatsu, Liebherr, Hitachi, Volvo, Case, Doosan, Bomag, Hamm, Dynapac, Manitou, Wirtgen and more!

more

Listing

Δέλτα 570 08, Ελλάδα

5,712 km

A COSTA RIGHI MAMMOTH

€21,500

Adjustable 2-spindle drill head, double drill head M

Call

Condition: repair required (used), CROSS CUTTING LENGTH min 800mm max 2500mm Biloefdp0h8

more

Listing

Hessisch Lichtenau

6,811 km

SPV = S-P-V AH7-31,2

€500

Call

Condition: used, Adjustable 2-spindle drilling head SPV = S-P-V type AH7-31,2 Double drilling head, multi-spindle drilling head Make No. 22112 - 392 Sog2rjxzm Drilling capacity per spindle 6 mm (in steel) Tapping per spindle max. M6 (in cast iron) Tapping per spindle max. M4 (in steel) Tool holder Ø 6 mm Collet Spindle output 2 pieces Spindle distance (center spindle to center spindle) 18 to 110 mm Drill head spindle drive MK 2 Drilling spindle speed max. 3500 rpm. transmission ratio 2.158 : 1 (input 1 rpm = output 2 rpm) - 2 tool spindles infinitely variable in spindle distance by turning - only one collet and one nut for collet available dimension W x D x H 130 x 65 x 220 mm weight 3 kg

more

Listing

China

2,987 km

KRAFT/Skymaster VF-1290 (Highspeed)

Call

Condition: new, Year of construction: 2021, x-travel:1200 mm y-travel:800 mm z-travel:500 mm distance spindle center to table:150-650 mm distance between columns:920 mm table-size:1320x800 mm table load:2000 kg T-slot (width-distance-quantity):14x120x7 mm spindle taper:HSK- A63 spindle speed:15000 (Direktantrieb) U/min spindle drive:9/15 kW Spindle motor torque:57.3/120 N.m. rapid traverse in x-y-z axis:30000 mm/min Cutting feed rate X/Y/Z axis:1~10000 mm/min Tool changer:20 max. tool diameter:100 mm max. tool length:235 mm max. tool weight:8 kg total power requirement:30 (opt. 80) kva Weight approx.:12 t Machine size (LxWxH):4808×4773×3215 mm B3gtyusa positioning accuracy:0,014 mm repeating accuracy:0,008 mm CNC controller:Fanuc oi MF (FANUC Oi-MF absolute type 1 controller system, 15"LCD High quality machining package?AICC II,jerk control,smooth tolerance, control,machining quality level adjustment function)?data servo(1GB) ,picture function ,pre-read 400 block) automatic tool changer:20/24 Scales:von FAGOR tool measuring system:von Blum workpiece measurement system:von Blum oil mist collector:von Losma/Italien

more

Listing

Fevziçakmak, 10753. Sk. No:38/C, 42050 Karatay/Konya, Turkey

4,842 km

Shredder, recycling

Mizar Makina Ltd Sti ASC Series Double Shaft Shredder,

Call

Condition: new, Year of construction: 2023, Inside of MIZAR ASC Series - Double Shaft SHREDDER Uddeholm blades are used. Pieces are cut and screened with knives mounted on the rotor and walls. Pieces come out in the width of the blades with screen. Rotors move independently and movement is provided by electric motor, driven by reducer. In case of any jam, shredder resolve it with rotors turning in opposite directions. After resolving, rotors continue to rotate in the normal direction. If the jam can not be resolved, the machine will sound and stop. There are three models as ASC60, ASC80 and ASC120. According to the material and demanded capacity suitable shredder type will be determined. Hue7uuej0

more

Listing

Wiener Neudorf

(dealership location)

6,311 km

Double-Column Presse

SICMI MST 125

€1,04,000

EXW ONO plus VAT

Call

Condition: new, neu ca. 4 Monate ab Auftragse Italien 104000 Zq7ni2s 2069.6 125 to 500 mm 1200x700 mm 600 mm 115 mm/s 7 mm/s 70 mm/s 15 kW 2550 mm 1500 mm 2600 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment

more

Listing

Germany

6,760 km

Scraper

Caterpillar 627F " Auger - Double Engin System"

€2,01,600

Double column press / Straight side press

Call

Condition: used, Year of construction: 2000, Operating hours: 2,201 h, machine/vehicle number: 1DL00786, We are ACCEPTING OFFERS for this unit! Buying with Equippo is easy: • Fully inspected machines • Delivered to your jobsite • Money Back Guaranteed 2000 - Caterpillar - 627F " Auger - Double Engin System" | Used Scraper with 2201 hours in good condition. Our expert inspector checked 24 inspection points - 20 were approved, 4 showed imperfections, 0 presented issues. Buy it now for EUR 201.600 or make us an offer. We can deliver from Boulazac Isle Manoire, Frankreich to your destination. You can estimate the cost using our price calculator. Twin engines, Auger mechanism - see attached document, the bawls are double lined with Teflon This machine can be sold in a combined deal with another Caterpillar 627 F. Contact us to give the special price for this amazing deal. Jpcallag CE marked: No EPA marked: No 24 Inspection points 20 Approved 4 Imperfections 0 Issues Contact us for more information and a FULL INSPECTION REPORT with detailed pictures and videos and the final price including delivery to your location. Questions? Our sales agents speak 13 languages. Are you looking for more equipment? We can help you find used tracked excavators, used mini excavators, used wheel loaders, used single drum rollers, used telescopic boom lifts, used articulated boom lifts, used scissor lifts, used telescopic forklifts, used crushers, used screens and more. Our stock includes leading brands such as: Caterpillar, Komatsu, Liebherr, Hitachi, Volvo, Case, Doosan, Bomag, Hamm, Dynapac, Manitou, Wirtgen and more!

more

Listing

Strassberg

(dealership location)

6,847 km

LOIRE ESLK

Call

Condition: used, Year of construction: 1993, Pressure total: 800 ton Blankholder capacity: 500 ton Ram capacity: 300 ton Stroke: 750 mm 72e8wye Blankholder stroke: 750 mm Ram stroke: 1100 mm Daylight: 1900 mm Table surface area : 2800 x 1800 mm Slide area: 2800 x 1750 mm Die cushion capacity in table: 200 ton Die cushion stroke: 280 mm Die cushion pad area: 2050 x 1600 mm Approach speed: 300 mm / sec Working speed: 1 - 50 mm / sec Return speed: 220 mm / sec Oil volume: 3000 l Height over floor approx.: 6500 mm Weight of machine approx.: 120 ton

more

Listing

Staufenberg

6,818 km

Unbekannt 150 t (Tisch 800 x 800 mm)

Call

installation height: 780 mm, motor power: 15 W, pressing force: 150 t, table width: 800 mm, table length: 800 mm, ram stroke: 500 mm, Condition: used, Hydraulic double column press Fabr. unknown Technical data: Pressing force 150 t / 0 - 600 kp/cm² Cylinder diameter 260 mm Stroke 500 mm Table size 800 x 800 mm Installation height 780 mm Drive power 15 kW External dimensions approx. 2250 x1400 x 3000 mm Weight approx. 6.2 t Functions - with and without throttle - with and without ejector - Lower and upper piston - Set-up - Injection press 0-10 30musxda - Quick presses 0 - 150 sec. - with and without venting - T-slots in upper and lower table used, in good condition

more

Listing

China

2,987 km

Automatic Double Head Screwdriver

KRAFT/Skymaster VF-1290 (Highspeed)

Call

Condition: new, x-travel:1200 mm y-travel:800 mm z-travel:550 mm distance spindle center to table:150-700 mm distance between columns:920 mm table-size:1320x800 mm table load:2000 kg T-slot (width-distance-quantity):14x120x7 mm spindle taper:HSK-A 63/HSK-E 50 spindle speed:15000 (opt. 24000/36000) U/min spindle drive:7.5/11 (opt. 30/39; 20/26 kW Spindle motor torque:47.7/70 (opt. 29.1/37.8; 10.4/13.5) N.m. rapid traverse in x-y-z axis:30000 (opt. 40000) mm/min Cutting feed rate X/Y/Z axis:1~10000 (opt.1~20000) mm/min Bbpg3rrk Tool changer:20 (opt. 24) max. tool diameter:100/130 (opt. 80/130) mm max. tool length:300 (opt. 220) mm max. tool weight:8 (opt. 4) kg total power requirement:30 (opt. 80) kva Weight approx.:12 t Machine size (LxWxH):5026x4276x3210 mm positioning accuracy:0,014 mm repeating accuracy:0,008 mm CNC controller:Siemens/Fanuc/Mitsubishi/Heidenhain automatic tool changer:20/24 linear scales:Heidenhain/Fagor tool measuring system:von Blum workpiece measurement system:von Blum oil mist collector:von Losma/Italien

more

Listing

Полтава

5,064 km

WISE-SERVICE IT Ukraine WS208

€15,800

EXW Fixed price plus VAT

Call

Condition: new, Automatic Double Head Screwdriver WS208 Automatic double-head screwdriver is able to function in two working modes according to the switch position: white and lamination. Easy and convenient setting of self-drilling steps for both modes, which ensures the appropriate quality of the product. Automation of the process allows one operator instead of two to perform the required amount of work. There is a possibility of scanning the workpiece to identify areas where it is prohibited to screw in the self-tapping screw. The availability of a buffer table for 8 parts allows the reinforcement process to be carried out continuously. Technical specifications: Dimensions: 9350x1760x900 mm Positioning accuracy: 0,1 mm. Capacity: 7 sec/part Voltage: 380/4 kW Weight: 700 kg C9ycxfu Pressure: 6 atm

more

Listing

Langenfeld (Rheinland)

7,003 km

Double-sided mitre fence

Altendorf Duplex

€820

Horiz. Miter Band Saw, Double Miter Band Saw, B

Call

Condition: excellent (used), Year of construction: 2005, Altendorf duplex mitre fence Duplex mitre fence for Altendorf with steel guide from approx. 1998 Dm72yz Stop rail with two stop flaps Cutting to length up to approx. 1350mm The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

more

Listing

Hessisch Lichtenau

6,811 km

BERNARDO MBS 315 DG-VR PRO

€5,000

Double column press / Straight side press

Call

Condition: new, Horiz. Miter band saw, double miter band saw BERNARDO Type MBS 315 DG-VR PRO Band saw for metalworking with swiveling saw bow. New machine from year of manufacture 2023 Fabr. Nr. 20231800 Sawing range at 90° round Ø 255 mm Sawing range at 90° square 255 x 255 mm sawing range at 90° rectangle H160 x 310 mm Sawing area at 45° round Ø 185 mm Sawing area at 45° square 180 x 180 mm Sawing area at 45° rectangle H230 x 170 mm Sawing area at 60° round Ø 115 mm K8r92jgu Sawing area at 60° square 115 x 115 mm Sawing area at 60° rectangle H160 x 115 mm Sawing area at -45° round Ø 180 mm Sawing area at -45° square 170 x 170 mm Sawing range at -45° rectangle H220 x 140 mm saw band 2750 x 27 x 0,9 mm Roll diameter 300 mm band speed 20 to 80 m/min. infinitely variable miter cut stepless quick adjustment working height 980 mm motor power 1,5 kW Connected load 400 Volt, 50 Hz - Swiveling saw bow for double miter cutting to the left (-45°) and to the right (+60°) - saw band speed infinitely variable via rotary potentiometer - Infinitely variable lowering via hydraulic lowering cylinder - automatic limit stop after material average - pressure gauge for band tension - Quick-action vice for double miter cutting can be shifted - Coolant device with electric pump - Workpiece stop Space requirement L x W x H 1750 x 820 x 1600 mm weight 390 kg Price quotation is for a fully assembled machine, as shown.

more

Listing

Strassberg

(dealership location)

6,847 km

REIS TUS 160 OK - 100

Call

Condition: used, Year of construction: 1983, machine/vehicle number: 393 421, Pressure total: 100 ton Daylight: 2.000 mm Ram stroke: 1.800 mm Table surface area : 1.800 x 1.550 mm Slide area: 1.800 x 1.550 mm Free frontal opening L-R: 1.620 mm Distance between the columns F - B: 820 mm Ejector Force: 30 kN max. capacity of swivelling ram plate: 6 ton Die Weight on table max.: 8 ton max. capacity of tilting table: 6 ton Oil volume: 200 l Required power: 15 kW Dimensions L x W x H: 6,65 x 2.94 x 5,82 m Sgsbb Weight of machine approx.: 22 ton

more

Listing

Staufenberg

6,818 km

SCHÖN SH / C 65 (65 t) Hubbegrenzung

Call

installation height: 400 mm, throat depth: 260 mm, pressing force: 65 t, Condition: used, Year of construction: 1980, Hydraulic double column press, SCHÖN type SH / C 65 Year of construction 1980 Technical data max. pressure capacity 65 t max. installation height 400 mm projection 260 mm Table size 500 x 600 mm 3sanqqqg opening in table 380 x 120 mm maximum stroke 150 mm Clamping spigot hole 50 x 70 mm Operating pressure 200 bar Drive power 11 kW External dimensions approx. 1100 x 1500 x 2900 mm With - light barrier - Two-hand release - stroke limitation Used

more

Listing

China

2,987 km

Automatic double-head guillotine WS G3

KRAFT VM-3018A

Call

Condition: new, Year of construction: 2022, x-travel:3200 mm y-travel:2000 mm z-travel:1000 mm distance spindle nose and table:200-1200 mm distance between columns:1820 mm table-size:3200×1600 mm table load:10 t T-slot (width-distance-quantity):22x180x8 mm spindle cone:50 BT spindle speed:6000 (Direktantrieb) 1/min spindle drive:22 kW Pzsf7 Spindle motor torque:689/1692 rapid traverse in x-y-z axis:20/20/12 m/min feeds:1~10000 mm/min Tool changer:Vorbereitung für WZW workpiece length:350 mm tool diameter:110/225 mm weight of tools max.:20 kg positioning accuracy:0,025 mm repeating accuracy:0,02 mm total power requirement:60 kva machine length:8927 mm machine width/height:5535/4650 mm Weight approx.:26 t automatic tool changer:Optional, vorbereitet CNC controller:FANUC OI MF absolute 1 controller with 15?SCREEN, high quality mold machining package(AICC2,smooth tolerance control, jerk control, gear box:von Barufaldi

more

Listing

Полтава

5,064 km

WISE-SERVICE IT Ukraine WSG3

€7,940

EXW Fixed price plus VAT

Call

Condition: new, Automatic double-head guillotine WS G3 In many factories, the assembly process of fittings is still not automated and as a result the operator spends a lot of time searching for fittings and cutting them to size. Automatic double-headed guillotine allows you to greatly simplify the work, thereby increasing the speed of tying the sash hardware in 2.5 times. Automatic double-headed guillotine performs automatic chopping of fittings according to the task. Marking and chopping of hardware is made according to the set program, which saves time and optimizes this section of production. Automated control system performs optimization of workplaces and allows to speed up the process of production in this area. production process in this area. Technical specifications: Width: 2950 mm Height: 1720 mm Depth: 710 mm Number of axles: 1 pcs. Positioning accuracy: 0,3 mm Voltage: 220 V Max. power: 1.0 kW Travel speed: up to 700 mm/sec Pressure: 6 Atm Ikdyw9gsjn Capacity: up to 2400 parts\ 8 hours Weight: 180 kg

more

Listing

Korschenbroich

7,030 km

Straightening Press - Double Column

BLE A800

Call

Condition: used, pressure 800 t distance between columns . mm stroke . mm total power requirement . kW Bim0kx2nwkt weight of the machine ca. . t dimensions of the machine ca. . m

more

Listing

Bremen

(dealership location)

6,872 km

30000 liter Fe double wall diesel tank

Call

Condition: ready for operation (used), General Location Outdoor storage Condition used Other Manufacturer: ThyssenType: DIN 6618 DG Quality mark: RAL RG 998Test certificate availableTest pressure inner tank: 2 barSafety double jacket with vacuum leak detectorTotal height incl. railing: approx. 6500 mmWeight: approx. 6 tStepladder heavily rusted Tank volume 30.000 liters upright design Equipment manhole / dome in the upper bottom Equipment crane lugs, safety jacket (double-walled leakage monitored) last purpose diesel tank Cgqo7cnhsf Material composition Material in contact with product Steel

more

Listing

Staufenberg

6,818 km

Double Column Milling M/C - Gantry Type

SCHÖN TES 25 (25 t)

Call

pressing force: 25 t, ram stroke: 100 mm, Condition: used, Year of construction: 1977, Hydraulic double column press SCHÖN type TES 25 Serial # 1656 Year of construction 1977 Bilog8qqry3 Technical data: Punching force 25 t Distance between columns / uprights 630 mm gr. distance from clamping surface to ram 350 mm Clamping surface 580 x 320 mm gr. ram stroke 100 mm Weight approx. 1100 kg Dimensions approx. 1200 x 800 x 2100 mm Used

more

Listing

Taiwan

4,329 km

KRAFT HDT-18|HDT-21|HDT-24

Call

Condition: new, :HDT-18|HDT-21|HDT-24 x-travel:2000/4000/6000/8000/10000/12000/14000/16000/18000/20000 mm y-travel:1800|2100|2400 mm z-travel:800/1000 mm distance between columns:1850|2150|2450 mm w-axis:N/A table width:1200|1500|1800 mm table length:= X-Weg distance spindle nose and table:555~1355 mm spindle cone:SK 50/BT 50 turning speeds:6000 U/min (mehr auf Anfrage) spindle drive:18,5/22 kW (mehr auf Anfrage) feed speeds:X/Y/Z: 15/15/12 m/min machine length:6,5~23,5 m machine width:5,9|6,2|6,5 m Weight approx.:20t+2t/m|22t+2t/m|24t+2,5t/m automatic tool changer:32-fach CNC controller:Siemens/Heidenhain/Fanuc Telescope cover for guideways:für die X-Achse Scales:in X- und Y-Achse (W-Achse) cloth cover:für die Y-Achse (JAVARA) CNC controls from:Siemens/Fanuc/Heidenhain 9uecccke different kind of milling heads:90°/5-Achs simultan/5-Seiten/Universal etc. CTS:40-70 bar heavy duty ram:550x550mm/650x650mm ATC:60/90/120

more

Listing

Staufenberg

6,818 km

Double Column Milling M/C - Gantry Type

SCHÖN SHK 15 (15 t) mit UVV

Call

installation height: 200 mm, pressing force: 15 t, ram stroke: 100 mm, Condition: used, Year of construction: 1980, Double column press SCHÖN type SHK 15 serial # 2724 year of construction 1980 with UVV Technical data: Compressive force 15 t Stroke 100 mm Stand width 500 (120) mm Table dimensions L x W 320x440 mm Installation height 200 mm Plunger surface 140 mm Pusher piston 125 mm Total drive power 3.0 kW Weight approx. 1500 kg Dimensions (LxWxH) approx. 1200 x 1000 x 2100 mm With - Accident prevention regulations (UVV) / light barrier used, in good condition Jbyxh28an

more

Listing

Taiwan

4,329 km

KRAFT SD(W)-24|SD(W)-28|SD(W)-32

Call

Condition: new, :SD(W)-24 | SD(W)-28 | SD(W)-32 x-travel:6000/8000/10000/12000/14000/16000/18000/20000/22000/240 00/36000 mm y-travel:2400|2800|3200 mm z-travel:1100/1400 mm distance between columns:2450|2850|3250 mm w-axis:1500/2000 mm für SD(W) table width:1600|2000|2400 mm table length:= X-Weg distance spindle nose and table:SD: 1080mm ~2180mm (1020mm-2420mm); SD(W): 800mm~800mm+Z+W spindle cone:SK 50/BT 50 turning speeds:6000 U/min (mehr auf Anfrage) 2ffl9a8gg spindle drive:22/26 kW (mehr auf Anfrage) feed speeds:X/Y/Z/W: 12/12/10/1 m/min machine length:13,5m~43,5 m machine width:6,5|6,9|7,3 m Weight approx.:50t+2t/m|53t+2,3t/m|56t+2,6t/m automatic tool changer:32-fach CNC controller:Siemens/Heidenhain/Fanuc Telescope cover for guideways:für die X-Achse Scales:in X- und Y-Achse (W-Achse) cloth cover:für die Y-Achse (JAVARA) CNC controls from:Siemens/Fanuc/Heidenhain different kind of milling heads:90°/5-Achs simultan/5-Seiten/Universal etc. CTS:40-70 bar heavy duty ram:550x550mm/650x650mm ATC:60/90/120

more

Listing

KRAFT FD-2122 m. Kopf f. 5 Seitenbearbeitung

Taiwan

4,329 km