Used storage tanks for sale (250)

Condition: good (used), functionality: fully functional, machine/vehicle number: og10, 10m³ tank for diesel, heating oil or HVO Codpfxecyb Twj Ab Ujha

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: og5, 5m³ filling station for diesel or storage tank for heating oil or HVO (pump not included in this offer) Cjdpscyb E Nefx Ab Ujha

Condition: ready for operation (used), Year of construction: 1993, Underground liquid gas tank farm incl. pumps and control system The tank farm was used to store propane/butane and consists of the following tanks: 2 x 93,674 ltr. (15.6 bar, year of construction: 1993, ø 2,000 mm, storage medium: propane/butane) 1 x 79,208 ltr. (15.6 bar, year of manufacture: 1993, ø 2,000 mm, storage medium: propane/butane) 1 x 58,101 ltr. (15.6 bar, year of manufacture: 1993, ø 2,000 mm, storage medium: propane/butane) 1 x 52,145 ltr. (15.6 bar, year of manufacture: 1993, ø 2,000 mm, storage medium: propane/butane) Chedpfx Absu Awitj Uja The tanks are buried underground and each has a dome shaft and corresponding monitoring fittings. The filling station incl. gas displacement line is available and installed (see photos). Five self-priming side channel pumps (Sterling, model CEHB) are installed for withdrawal. The system control is available and installed. All documentation is available.

Condition: used, 4 cyl. upright stainless steel container, second-hand capacity: 56 cbm Order number: 4194 Material: V2A 1.4301 Dimensions: 2,800 mm diameter 9,000 mm cyl. height Csdpfx Aju H U Rcob Usha 450 mm top base 550 mm lower floor 580 mm ground clearance 10,580 mm approx. total height Design: cyl. upright on 8 steel legs with conical shelves designed for spec. weight 1.4 Connections: 1 manhole DN 600 in the cylinder 1 dome DN 600 in the upper base 2 x DN 125 in the upper base and 1 socket 2" DN 80 outlet at bottom center

Condition: ready for operation (used), 1 cylindrical, vertical mixing tank made of stainless steel, used Capacity: 50 cbm Order number: 3750 Material: V2A Dimensions: 3,300 mm diameter 5,700/5,900 mm cylindrical height 400 mm upper bottom 1,700 mm height of the agitator 8,000 mm overall height Design: Cylindrical, vertical with a flat bottom that slopes inwards towards the outlet - must be supported during installation, otherwise the bottom will crack - with a conical upper bottom Trapezoidal agitator mounted centrally from above approx. 5 kW, approx. 30 rpm with an external half-pipe coil, Cjdpfxoiq Izde Ab Usha 18 m² on the cylinder, tested for tightness with an operating overpressure of 2 bar upper bottom insulated, with a cover Stainless steel, fully welded Connections: 1 manhole 340 x 440 mm in the cylinder 1 spray nozzle centrally at the top 2 connections DN 65 at the lowest point Weight: approx. 5 tons

Condition: used, 2 cylinder standing agitator tank made of stainless steel, used Contents: 50 cbm Order number: 3810 Material: 1.4401 in contact with product 1.4301 otherwise Inside weld seams ground to be food safe Dimensions: 3,000 mm internal diameter 3,100 mm external diameter 7,000 mm cylinder height 350 mm upper base 500 mm lower base 400 mm ground clearance 8,250 mm approx. total height Design: cylindrical standing on frame with conical bases Propeller agitator installed at an angle in the cylinder, 12 kW, 980 rpm. Double jacket on the cylinder, 2 circuits approx. 14 sqm, 76 liters each and on the lower floor, 1 circuit, approx. 5 sqm, 90 liters Operating overpressure 2 bar Insulation 50 mm PU foam around cylinder, upper floor and frame, stainless steel cover with manufacturer's certificate and material certificates Connections: 1 manhole 340 x 440 mm in the cylinder Ventilation Ø 300 with spray head in the upper floor Outlet bottom center DN 65 extended Cjdpfxev Dthws Ab Uoha Weight: approx. 6.5 tons

Condition: refurbished (used), Fire water tank according to DIN 14230 (underground fire water tank): 100,000 liter fire water tank for underground storage, single- or double-walled, 1 manhole DN 600 with a blank cover including gasket and screws, externally with bitumen insulation - used - Tank volume: 100,000 liters / 100 m³ Length: approx. 15,750 mm Diameter: approx. 2,900 mm Weight approx. 11,600 kg Material: Steel material S 235 JRG 2 The tank has a fire water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in form B without a gauging port. Furthermore, the tank has a ventilation flange with a cap in nominal width/DN 100 with a total length of approx. 1,300 mm, suitable for 800 mm of soil cover and 500 mm above ground. - The tank is emptied, cleaned and has been given a bitumen outer coating in our factory. Upon request, we can equip the tank with an internal full coating based on bitumen (for corrosion protection) or an epoxy resin internal coating. Cedpfx Aei Enwveb Ueha We would be happy to offer you a cost-effective delivery with our own truck. Simply let us know the delivery address, and you will promptly receive the exact freight costs. An inspection is possible at any time by prior appointment. If you require any further information, please call us or send us an email to b.barth(at)barth-tank.de We can also accept trade-ins and purchase tanks/containers; simply contact us for this. We also have the following sizes of these tanks constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000, 120,000 liters

Condition: ready for operation (used), functionality: fully functional, Buffer tank standing on 4 profile feet, insulated Tank specifications: Volume: approx. 50,000 liters Operating pressure: max. 4 bar Operating temperature: max. 90° C Diameter incl. insulation: approx. 3,600 mm Cylindrical height: approx. 6,360 mm Total height with feet: approx. 8,700 mm Condition: fully overhauled Tank with dished (Klöpper) ends Wall thicknesses: Ends: 12 mm, Shell: 10.5 mm Tank equipment: • 1 manhole DN 600 with blank cover • 7 x 1/2'' coupling sockets for temperature sensors • 2 lifting lugs on the shell • 2 lifting lugs on the top end • 2 lifting lugs on the tank feet • 1 drain 2'' led laterally to the shell with ball valve, terminating in the manhole cover hood • 1 vent Ø33.7 x 3.6 mm, routed downwards on the side within the insulation and terminating in the manhole cover hood • 1 connection DN 125, flanged externally, inside terminating in a 90° elbow at the tank center • 1 connection DN 125, flanged externally, inside terminating in a 90° elbow at the tank center All existing but unneeded nozzles/connections will be professionally removed and sealed. Insulation: The tank is fitted with 220 mm thick insulation, consisting of 120 mm PU foam and 100 mm mineral wool. The insulation cladding is made of galvanized sheet steel (other materials available on request). Optional: Chedpfx Abetwfxls Uja • Vacuum breaker for pressure vessel • Verification of stability in accordance with current regulations

Condition: refurbished (used), 120,000 ltr. buffer tank / pressure tank, standing on 8 tubular feet Tank data: Volume: approx. 120,000 liters Operating pressure: max. 2 bar Operating temperature: max. 90° C Diameter: 3,100 mm Cylindrical height: 15,150 mm Total height with feet: approx. 16,540 mm Ground clearance: approx. 510 mm Container with dished bases. Wall thicknesses: Bottoms 10 mm, shell 9 mm Container equipment: ⦁ 1 manhole DN 600 with blind cover ⦁ 7x 3/8'' pipe, closed in the tank, open on the outside ⦁ 2 crane eyes in the jacket area ⦁ 2 crane eyes on the top floor ⦁ 2 crane eyes on the tank feet ⦁ 1 2'' discharge led to the side of the shell with ball valve ⦁ 1 vent Ø33.7 x 3.6 mm, outside the insulation on the side of the storage tank led downwards with ball valve ⦁ 1 DN 125 connection, outside ending in flange, inside in the middle of the tank with 90° bend Cedpstwfxxsfx Ab Ujha ⦁ 1 DN 125 connection, ending in flange outside, routed upwards inside the tank and ending in the middle of the tank via 2x 90° bends We are happy to offer the insulation of the tank (new) in any thickness on request.

Condition: excellent (used), functionality: fully functional, tank capacity: 68,000 l, usable tank capacity: 65,000 l, total height: 9,865 mm, inner diameter: 3,400 mm, outer diameter: 3,800 mm, overall weight: 4,200 kg, negative pressure: 0.02 Pa, overpressure (max.): 2 bar, 20 x 68 m³ ZKG Tank / Beer Pressure Tank / Fermentation and Storage Tank Technical Data / Dimensions Available units: 20 Total volume: approx. 58,000 liters Tank type: Pressure tank Condition: Used Suitable for food: Yes Design: Suspended Internal diameter: approx. 3,400 mm External diameter: approx. 3,800 mm Cylindrical height: approx. 6,000 mm Total height: approx. 9,865 mm Weight (empty): approx. 4,500 kg Specific weight of medium: 1.0 t/m³ Operating pressure: Overpressure Operating pressure: 2 bar Test pressure: 2.86 bar Wall thickness, cone: approx. 4–5 mm Wall thickness, top head: approx. 6 mm Wall thickness, shell/cylinder: approx. 3.5–4 mm Operating temperature: -10°C / +50°C Material: Inner shell material: V2A (1.4301) Internal surface: Ground and pickled Heating / Cooling System Cooling medium: Glycol Operating pressure: 2.0 bar Operating temperature: -3°C Heating / cooling system material: V2A (1.4301) 2 x shell cooling zones (approx. 11 m² each) with approx. 100 liters capacity each 1 x cone cooling zone (approx. 4 m²) with approx. 70 liters capacity Insulation Insulation thickness: approx. 150 mm Insulating material: PU foam / mineral wool Chedpfoyhzq Ajx Ab Usa Cone cladding: Stainless steel (1.4301) Shell cladding: Aluminum trapezoidal sheeting Equipment Mounting type: Hanging lugs Number: 4 Attachment: Fixed Top base type: Basket dome Bottom base type: Cone Top head: 1 x manway DN 500 with insulation hood 1 x roof edge railing 1 x valve dome with the following fittings/connections: 1 x vacuum valve (DN 40) 1 x safety valve (DN 40) 1 x cleaning fitting with spray head DN 32 (removable) Shell: 2 x connections for temperature measurement with insulation box 1 x cable protection tube DN 50 1 x dome drain pipe DN 15 1 x cleaning line DN 50/40 3 x cooling supply (DN 25 / R1") 3 x cooling return (DN 25 / R1") Bottom/cone: 1 x sampling valve DN 10 1 x swiveling cone NW 450 1 x cone with threaded connection DN 65 terminating Documentation: Drawing Inspection book TÜV certificate The tanks originate from various years of manufacture (1990–2004) and may differ slightly in equipment and design.

Condition: refurbished (used), Fire water tank according to DIN 14230 (underground fire water tank): Cjdofn Rddepfx Ab Usha 100,000-liter fire water tank for underground storage, single-walled, 1 manhole DN 600 with blind cover including gasket and screws, with bitumen insulation on the outside - used - Tank volume: 120,000 liters / 120 m³ Length: approx. 16,500 mm Diameter: approx. 3,100 mm Weight approx. 3,100 kg Material: Steel material S 235 JRG 2 The tank has a fire water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in form B, without a dipstick. Furthermore, the tank has a ventilation flange with a cap, in NW/DN 100, with a total length of approx. 1,300 mm, suitable for 800 mm of earth cover and 500 mm above ground. - The tank has been emptied, cleaned, and factory-coated with a bitumen exterior finish. Upon request, we can equip the tank with an internal full coating based on bitumen (for corrosion protection) or an epoxy resin internal coating. We would be happy to offer you a cost-effective delivery with our own truck. Simply let us know the delivery address, and you will promptly receive the exact freight costs. An inspection is possible at any time after prior arrangement. If you require any further information, please call us or send us an email to b.barth(at)barth-tank.de We can also offer trade-in and purchase options for tanks/containers; please feel free to contact us. We also have the following sizes of these tanks constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000, 100,000 liters.

Condition: used, Standing stainless steel tank: Nozzles and connections: In the bottom: 1 x outlet nozzle extended to the front, ending in 2 x DN 50 threaded connections In the top: 2 x threaded nozzles DN 25 Cjdpfxoxxknae Ab Usha On the shell: 1 x oval manway with swing bolt 1 x nameplate 1 x threaded nozzle Nominal capacity: approx. 8,500 l Internal diameter: 1,900 mm Cylindrical height: approx. 2,500 mm Total height: approx. 3,590 mm with 700 mm ground clearance Perm. operating overpressure: 1.5 bar Perm. operating temperature: 20 °C Material: Stainless steel V2A (1.4301) Wall thickness (bottom): 3 mm Wall thickness (top): 3 mm Wall thickness (shell): 3 mm Tank standing on three robust legs Otherwise as per images

Condition: used, functionality: fully functional, tank capacity: 30,000 l, total height: 7,200 mm, inner diameter: 2,500 mm, outer diameter: 2,900 mm, overall weight: 6,000 kg, wall thickness: 10 mm, wall structure: single-walled, number of chambers: 1, manhole diameter: 600 mm, pressure (max.): 3 bar, Buffer Storage Tank – 30,000 L, Vertical, Insulated Volume: 30,000 liters Internal diameter: approx. 2,500 mm External diameter (with insulation): approx. 2,900 mm Cylindrical height: approx. 5,520 mm Overall height: approx. 7,200 mm Empty weight: 6,000 kg Operating pressure: +3.00 bar Operating temperature: -10 / +900 °C Medium: Water Density: 1,000 kg/m³ Bottom wall thickness: approx. 11 mm Shell/cylinder wall thickness: approx. 10 mm Material / Characteristics Shell material: P265GH / S235JR Insulation: 200 mm mineral wool Cladding: smooth aluminium sheet (weatherproof) Mineral wool will be newly installed, i.e., insulation thickness can be chosen freely. Equipment Mounting: Feet Number: 4 Attachment: fixed Top/base type: dished end (Klöpper head) Bottom/base type: dished end (Klöpper head) Connections: - 1 manhole DN 600 with blind cover - 7x 1/2'' sockets for temperature sensors - 2 lifting lugs on the shell - 2 lifting lugs on the top head - 2 lifting lugs at the tank feet Chodpfxoxdknke Ab Usa - 1 drain 2'' at the tank bottom, routed to the outside and terminating in a 2'' ball valve - 1 vent Ø33.7 x 3.6 mm, routed downwards laterally within the insulation and ending in the manhole cover enclosure - 1 connection DN 125, flanged externally, ending internally in a 90° bend in the tank center - 1 connection DN 125, flanged externally, ending internally in a 90° bend in the tank center Documentation: Drawing

Condition: excellent (used), Equipment: type plate available, 18 x sparkling wine pressure tank/storage tank made of V2A, 8 bar, with lateral agitator mixer - second-hand - used Manufacturer: Rieger Volume approx. 52,100 liters Diameter approx. 3,250 mm cyl. height approx. 5,500 mm Total height approx. 8,000 mm Cylinder wall thickness: 11 mm Operating pressure: 8 bar Working temperature: 20 C° Internal surface: 2B=IIIC ground Surface outside: marbled Top shelf: dished bottom 3 crane eyes CIP line DN 50 drawn downwards with flange connection with pressure line DN 25 5 saddle feet Tank cylinder: Manhole oval 350 x 450 mm 1/2" sample tap with flange connection Clear drain DN 65 with angle seat valve Lateral agitator mixer, type: propeller at 315° from the manhole Complete champagne pressure fitting with safety valve, pressure gauge, vacuum valve and DN 25 angle seat valve Underbody: dished bottom Residual drain pipe pulled forward in the middle, flush with the tank DN 65 with angle seat valve 6 sturdy with height-adjustable spherical feet and sturdy washers 9 basic tanks and 9 saddle tanks are available Chedpfotvg Uyjx Ab Uea otherwise as per photos

Condition: excellent (used), functionality: fully functional, usable tank capacity: 60,000 l, total height: 11,500 mm, inner diameter: 2,900 mm, outer diameter: 3,000 mm, wall material: stainless steel, Agitator Tank made of Stainless Steel (V2A), Insulated (Milk Tank) Technical Data / Dimensions Available quantity: 5 Volume: approx. 60,000 liters Tank type: Agitator tank Chsdpfxoxw Rrps Ab Uja Condition: used Food-grade: yes Design: vertical Internal diameter: approx. 2,900 mm External diameter: approx. 3,000 mm Cylindrical height: approx. 8,100 mm Total height: approx. 11,500 mm Specific gravity of medium: 1.0 t/m³ Operating pressure: non-pressurized Operating temperature: 40°C Notes: former milk storage tank Material / Construction Internal shell material: V2A (1.4301) Foot material: stainless steel Internal weld seams: ground smooth Insulation Insulation thickness: approx. 50 mm Insulation material: PU foam Insulation shell material: stainless steel Insulation shell: diffusion-tight welded Notes: The insulation shell of the tank has some minor dents which do not affect its functionality. Equipment Support design: foot ring / support skirt Mounting: fixed Top head: conical Cone angle: approx. 15% Bottom head: conical Top head features: 1 x vent hood with mesh 1 x CIP nozzle 1 x threaded socket for level limit measurement 2 x lifting lugs Shell features: 1 x oval manway, swing-type (approx. 340 x 440 mm) 1 x oval manway (approx. 340 x 440 mm, in support skirt) 1 x agitator flange with agitator 1 x threaded nozzle for temperature measurement Bottom head features: 1 x threaded nozzle for temperature measurement 1 x nozzle for level limit measurement 1 x residue drain Notes: The connection configurations differ slightly between the 5 tanks Agitator Agitator included Type: propeller Classification: high-speed Quantity: 1 Mounting position: lateral Speed: 940 rpm Agitator power: 2.2 kW Impeller length: approx. 600 mm Manufacturer: Stelzer Notes: Some agitators supplied with stainless steel cover

Condition: excellent (used), Round stainless steel container in a mobile tilting frame with a pouring spout. Volume: 1,000 liters Material: Stainless steel Codpfof Hnu Sex Ab Usha In like-new condition!

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, tank capacity: 36,784 l, total height: 6,245 mm, inner diameter: 3,400 mm, outer diameter: 3,770 mm, overall weight: 4,000 kg, negative pressure: 0.02 Pa, overpressure (max.): 2 bar, 2 x 37 m³ CCT Vessels / Beer Pressure Tank / Fermentation and Storage Tank Technical Data / Dimensions Available units: 2 Total volume: approx. 36,784 liters Tank type: Pressure vessel Condition: used Suitable for food use: yes Design: suspended Internal diameter: approx. 3,400 mm External diameter: approx. 3,800 mm Total height: approx. 6,245 mm (incl. insulation dome approx. 7,245 mm) Weight (empty): approx. 4,000 kg Specific weight of medium: 1.0 t/m³ Operating pressure: Overpressure Operating pressure: 2 bar Test pressure: 2.9 bar Cone wall thickness: approx. 3.5-5 mm Top head wall thickness: approx. 6 mm Shell/Cylinder wall thickness: approx. 3 mm Operating temperature: -10°C / +50°C Material: Inner shell material: Stainless steel V2A (1.4301) Internal surface: ground and pickled Heating/Cooling System Cooling medium: Glycol Operating pressure: 3.0 bar Operating temperature: -3 °C Heating/Cooling system material: Stainless steel V2A (1.4301) 1 x shell cooling zone with approx. 112 ltr. capacity 1 x cone cooling zone with approx. 40 ltr. capacity Insulation Insulation thickness: approx. 150 mm (shell + top head), cone: 100 mm Insulation material: PU foam Cone cladding: Stainless steel (1.4301) Shell cladding: Aluminium trapezoidal sheet Equipment Mounting type: Suspension lugs Number: 4 Fastening: fixed Top head type: Torispherical head Lower head type: Conical Top head: 1 x manway DN 1000 with insulated hood and vent DN 80 1 x roof edge railing 1 x spray ball DN 32 incl. spray tube (removable) 1 x Cleaning-Air valve combination (RLV) consisting of: Chedjyhzrgopfx Ab Uja 1 x vacuum valve DN 50 1 x safety valve DN 25 1 x cleaning connection DN 100 1 x air connection DN 50 (threaded) Shell: 2 x temperature measuring connection with insulated box 1 x condensate pipe DN 32 1 x sampling line DN 10 1 x cable protection pipe DN 50 1 x cleaning line DN 50 1 x return manifold DN 40 (cooling) 1 x supply cooling DN 25 1 x cooling vent DN 10 1 x cooling drain DN 20 Lower head/cone: 1 x sample valve DN 10 1 x swiveling cone NW 450 1 x cone with threaded outlet DN 100 Documentation: Drawing Inspection book TÜV certificate

Condition: refurbished (used), Used storage tank made from steel in accordance with DIN 6616/2, double-walled with test certificate, above ground storage, with saddles, 1 manhole with PE-blind cover, gasket, screws and nuts (stainless steel). The tank has been cleaned professionally by us and equipped with an interior lining suitable for liquid fertilizer. Volume: 80.000 Liters Diameter: ca. 2.900 mm Length: ca. 12.780 mm Weight: ca. 15.750 kg At your request we can give the tank a new coat of paint and add a ladder with a platform. Chedshui D Tjpfx Ab Uea Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective casing for the leak detector • Basic instruments for liquid fertilizer consisting of filler pipe, extraction pipe, ventilation pipe and sounding pipe • Liquid fertilizer pump made from Polyester 2" • Installation of the pump • Overfill protection • Anti-siphon valve and connecting pipes • Deadman switch • Additional connection for water admixture

Condition: refurbished (used), Used storage tank made from steel in accordance with DIN 6616/2, double-walled with test certificate, above ground storage, with saddles, 1 manhole with PE-blind cover, gasket, screws and nuts (stainless steel). Codpfxohui Efo Ab Ujha The tank has been cleaned professionally by us and equipped with an interior lining suitable for liquid fertilizer. Volume: 60.000 Liters Diameter: ca. 2.500 mm Length: ca. 12.680 mm Weight: ca. 10.700 kg At your request we can give the tank a new coat of paint and add a ladder with a platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective casing for the leak detector • Basic instruments for liquid fertilizer consisting of filler pipe, extraction pipe, ventilation pipe and sounding pipe • Liquid fertilizer pump made from Polyester 2" • Installation of the pump • Overfill protection • Anti-siphon valve and connecting pipes • Deadman switch • Additional connection for water admixture

Condition: refurbished (used), 80 m³ / 80,000 liter fire water tank according to DIN 14230 Tank volume: 80,000 liters / 80 m³ Length: approx. 12,780 mm Diameter: approx. 2,900 mm Weight: approx. 13,250 kg Material: Steel, grade S 235 JRG 2 Underground tank for underground storage, single- or double-walled, suitable for areas that can be walked and driven on (load class SLW 30) with 1 dome (outer diameter 720 mm) with a blank cover, seal, and screws. New or used, immediately available! The container has been emptied, cleaned, completely overhauled, and inspected for leaks by us as a specialist company. The container complies with the requirements of DIN 14230 (Underground fire water tank): - Fire water suction connection according to DIN 14244 with a mounted fire brigade coupling / fixed coupling A according to DIN 14319 in the form B design without a gauging port - Vent flange stub in DN 100 with cap, with a total length of approx. 1,300 mm, suitable for 800 mm ground cover and 500 mm above ground - Externally coated with bitumen for protection - Upon request, we can coat the tank with an internal full coating based on bitumen or epoxy resin (against corrosion) - It is also possible to line the container with a plastic inner liner Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and we will provide you with the exact shipping costs immediately. Inspection is possible at any time by prior appointment. If you require further information, please call us or send us an email to b.barth(at)barth-tank.de We can also offer trade-in and purchase options for tanks/containers of all kinds; please do not hesitate to contact us. We also have the following sizes of these tanks in stock: Chjdpfxshh Sr Ue Ab Uja - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters

Condition: used, Stainless steel (V2A) agitated tank, upright design Technical Data / Dimensions Available units: 2 Volume: approx. 86,000 liters Tank type: agitated tank Condition: used Suitable for food: yes Design: upright Inner diameter: approx. 3,600 mm Outer diameter: approx. 3,650 mm Cylindrical height: approx. 9,500 mm Total height: approx. 11,000 mm Specific gravity of medium: 1.05 t/m³ Operating pressure: non-pressurized Material / Specifications Cedpfxjw Ibi Io Ab Usha Inner shell material: V2A (1.4301) Internal welds ground smooth Equipment Support structure: profiled feet Number: 6 Mounting: fixed Feet adjustable in height Bottom design: torispherical bottom Top/bottom: torispherical head Top: 1 x agitator flange 1 x level measurement port 2 x lifting lugs 1 x threaded nozzle DN 65 for CIP 1 x vent nozzle DN 400 (without cover) 2 x ladder hooks Shell: 1 x manway (340 x 440) with cover 1 x clear drain nozzle 1 x threaded nozzle DN 65 1 x nameplate 1 x ladder hook 1 x sampling valve Various cable ducts to vessel top Bottom: 1 x residue outlet (approx. DN 50) with outlet pipe (cut off) 1 x nozzle for level measurement Agitator Agitator present Type of agitator: beam agitator Number: 1 Mounted: from above Number of agitator levels: 3 Bottom bearing for agitator shaft present Documentation Sketch

Condition: refurbished (used), Used storage tank made from steel in accordance with DIN 6616/2, double-walled with test certificate, above ground storage, with saddles, 1 manhole with PE-blind cover, gasket, screws and nuts (stainless steel). Cedpfxohui Hkj Ab Uoha The tank has been cleaned professionally by us and equipped with an interior lining suitable for liquid fertilizer. Volume: 30.000 Liters Diameter: ca. 2.000 mm Length: ca. 9.940 mm Weight: ca. 5.500 kg At your request we can give the tank a new coat of paint and add a ladder with a platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective casing for the leak detector • Basic instruments for liquid fertilizer consisting of filler pipe, extraction pipe, ventilation pipe and sounding pipe • Liquid fertilizer pump made from Polyester 2" • Installation of the pump • Overfill protection • Anti-siphon valve and connecting pipes • Deadman switch • Additional connection for water admixture

Condition: refurbished (used), 90 m³ / 90,000 l fire water tank according to DIN 14230 Tank volume: 90,000 liters / 90 m³ Length: approx. 13,500 mm Diameter: approx. 3,000 mm Weight: approx. 11,000 kg Material: Steel, grade S 235 JRG 2 Underground tank for underground storage, single- or double-walled, suitable for pedestrian and vehicular traffic (load class SLW 30) with 1 dome (outer diameter 720 mm) with blind cover, gasket, and screws. Available new or used, immediately! The container has been emptied, cleaned, fully overhauled, and tested for leaks by us as a specialist company. The container complies with the requirements of DIN 14230 (Underground fire water tank): - Fire water suction connection according to DIN 14244 with a mounted fire brigade coupling / fixed coupling A according to DIN 14319 in design Form B without inspection port - Vent flange stub in DN 100 with cap, total length approx. 1,300 mm, suitable for 800 mm ground cover and 500 mm above ground - Externally coated with bitumen for protection - Upon request, we can coat the tank with an internal full coating based on bitumen or epoxy resin (for corrosion protection) - It is also possible to line the container with a plastic inner liner Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and you will receive the exact shipping costs immediately. An inspection is possible at any time by prior appointment. If you require any further information, please call us or send us an email to b.barth(at)barth-tank.de We can accept and purchase tanks/containers of all types, please contact us. We also have the following sizes of these tanks in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters Chjdpfx Abjhh Stge Usa

Condition: refurbished (used), Used storage tank made from steel in accordance with DIN 6616/2, double-walled with test certificate, above ground storage, with saddles, 1 manhole with PE-blind cover, gasket, screws and nuts (stainless steel). The tank has been cleaned professionally by us and equipped with an interior lining suitable for liquid fertilizer. Volume: 50.000 Liters Chodpfxjhui Eij Ab Uja Diameter: ca. 2.500 mm Length: ca. 10.700 mm Weight: ca. 9.200 kg At your request we can give the tank a new coat of paint and add a ladder with a platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective casing for the leak detector • Basic instruments for liquid fertilizer consisting of filler pipe, extraction pipe, ventilation pipe and sounding pipe • Liquid fertilizer pump made from Polyester 2" • Installation of the pump • Overfill protection • Anti-siphon valve and connecting pipes • Deadman switch • Additional connection for water admixture

Condition: refurbished (used), Used storage tank made from steel in accordance with DIN 6616/2, double-walled with test certificate, above ground storage, with saddles, 1 manhole with PE-blind cover, gasket, screws and nuts (stainless steel). The tank has been cleaned professionally by us and equipped with an interior lining suitable for liquid fertilizer. Volume: 20.000 Liters Diameter: ca. 2.000 mm Length: ca. 6.840 mm Codpfshui Ipex Ab Uoha Weight: ca. 4.000 kg At your request we can give the tank a new coat of paint and add a ladder with a platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective casing for the leak detector • Basic instruments for liquid fertilizer consisting of filler pipe, extraction pipe, ventilation pipe and sounding pipe • Liquid fertilizer pump made from Polyester 2" • Installation of the pump • Overfill protection • Anti-siphon valve and connecting pipes • Deadman switch • Additional connection for water admixture