Used Tipper semitrailers for sale (610)

Condition: new, overall weight: 36,000 kg, maximum load weight: 29,740 kg, axle configuration: 3 axles, loading space length: 9,890 mm, loading space width: 2,460 mm, loading space height: 2,100 mm, loading space volume: 51 m³, Year of construction: 2025, total width: 2,550 mm, total height: 3,750 mm, Equipment: ABS, Chassis * 1,150 mm fifth wheel height unloaded * Welded construction, weight-optimized from high-strength S700 steel Csbsv U Hwto Hb Euaegt * Side impact protection made of aluminum profiles according to ECE 73 * 2 plastic wheel chocks * Foldable underrun protection at the rear * SAF Hercules 2-speed transmission supports, full load * Aluminum ladder L = 2,840 mm * Toolbox - 165 L * Water tank - 30 L * Shovel and broom on the chassis, above the fenders * Dust bag (1 pc.) * Extendable ladder at the rear * Bellows pressure gauge * Binotto hydraulic cylinder, eye-mounted above Axles and Suspension * SAF disc axles 3x9000 kg 22.5 INTRADISC CD * 3 rigid axles * A-axle as lift axle * 6x ABERG POLISHED aluminum rims 22.5x11.75 ET-120 * Tire pressure monitoring system Electrics * Aspöck LED lighting - ECOLED II * LED reversing lights - 2 pcs. * LED work lights on the side guard - 2 pcs. * 2x7-pin + 1x15-pin with EBS connection * With flashing side marker lights Body * Volume 51m3 * Front wall inclined at 20 degrees * Side walls, internal thickness 2.5 mm, fully welded * Two-wing aluminum combination door, aluminum (1/2 + 1/2) vertical with portal beam * 2 grain slides * Bottom tension locks * Pallet-width design * 5 mm floor * Floor cross member spacing 360 mm * Tension chain between the side walls * Operator's station on the chassis frame, access in FR on the left (driver's side) * PVC roll-up tarpaulin 680 g/m² with quick-release fastener and aluminum winding tube. Center tube welded into the tarpaulin. Painting * Chassis paint RAL 7021 (black-gray) * Body paint RAL 6018 (yellow-green) * Tarpaulin color similar to RAL 3002 CARMINE RED

Condition: used, overall weight: 36,000 kg, maximum load weight: 30,300 kg, axle configuration: 3 axles, loading space length: 8,170 mm, loading space width: 2,345 mm, loading space height: 1,765 mm, loading space volume: 33 m³, first registration: 07/2022, Year of construction: 2021, Total length without chute: 9,616 mm Total length with chute: 9,777 mm Interior length: 8,170 mm Total width: 2,550 mm Interior width: 2,346 mm Total height: 3,345 mm Interior height: 1,765 mm Track width: 2,040 mm Distance: Kingpin to 2nd axle: 5,560 mm Axle distance: 1,310 mm Fifth wheel height (unladen): 1,200 mm Rear overhang without chute: 1,296 mm Rear overhang with chute: 1,457 mm Loading floor height: 1,464 mm Max. height with tipped body: 9,110 mm a Cylinder tilt angle: 49° Tires: 385/65 R22.5 Total weight: 39,000 kg Unladen weight with equipment As specified: 6,378 kg Axle load: 9,000 kg Fifth wheel load: 12,000 kg Load volume: 33 m³ Chassis - Welded construction, weight-optimized from high-strength S700 steel, working range according to ISO 1726:2003. 3 axles, 9,000 kg: SAF Intradisc CD - Disc brake 22.5 mm, offset = 120 mm (430 mm) - Odometer on the center axle - Air suspension - Axle lift on the first axle, automatic/pneumatic - Control line for the lift axle for button operation from the driver's cab, without truck Accessories - Raising and lowering the chassis with HS valve - Automatic lowering when tipping, can be switched off - Fifth wheel plate with 2 kingpins according to SAE standards, replaceable - 2 aluminum drop legs, Fab. Haacon, 24 t drawbar load in set - Side impact protection made of aluminum profiles according to ECE 73 - Steel underrun protection, according to ECE 58, foldable, suitable for road pavers Cgjb Hb Eusulq H Ajaot - Fifth wheel height unladen: 1200 mm Braking system/Pneumatics - Dual-line air brake according to ADR requirements WABCO / KNORR / HALDEX, ECE-compliant - Anti-lock braking system EBS 2S/2M with vehicle stabilization function (RSS/RSP/TRP) supplied via ISO 11992 connection - Double-diaphragm spring-loaded cylinder - Air pressure gauge - Aluminum air reservoir - Air connection on the rear chassis Electrical system - 24-volt system according to ECE and ADR - 2x7-pin and 1x15-pin sockets, as well as EBS socket (without connection cable to the tractor unit) - Multifunctional taillights: ASPÖCK EUROPOINT III - Lights: Stop, parking, and clearance lights (LED) - Lights: Reverse light, fog light, and turn signals (bulb) - 1 license plate light (LED) - Side marker lights (LED) - Marker lights (LED) - 2 LED reversing lights - 2 LED side work lights Construction - Half-shell body made of high-quality HARDOX HB 450 steel, tapered body shape - Side walls 3 mm - Floor 4 mm - Bulkhead angled 20° - Rear wall: Steel pendulum flap, surface-mounted, with double pendulum bearing - Grain slide - Replaceable rubber seal - Rear wall locking: 2 side tensioners, mechanical. 2 hook locks at the bottom, automatic - Hydraulic cylinder Fab Hyva Alpha, eye-mounted at the top - Hydraulic connection kit, connection hose 1? - Electric sliding roof Fab. CRAMARO, body height 300 mm, tarpaulin color: RAL 5010 gentian blue, Access ladder on the canopy - Bracing: tension chain between the side walls, 1 piece Paintwork All steel parts are shot-blasted twice by the paint shop. Dust-free painting in paint booths. Chassis paint: carmine red RAL 3002 Body paint: gentian blue RAL 5010 Other equipment - 2 plastic wheel chocks - 6 independent wheel fenders (plastic), rear fenders with splash guards - 44 L toolbox mounted at the front - 30 L water tank - Aluminum lean-to ladder with bracket over the right fender - Shovel and broom with bracket over the left fender - Reflective warning signs according to UNECE Regulation 69 - Partial contour marking

Condition: used, overall weight: 36,000 kg, empty load weight: 7,660 kg, maximum load weight: 28,340 kg, axle configuration: 3 axles, first registration: 03/2001, suspension: other, fuel type: gasoline, gearing type: other, driver cabin: other, emission class: none, * Auger * Can be separated into 3 compartments Csbev Uczho Hb Euasgt * Roll-up tarpaulin * Length = 10.36 m / Width = 2.49 m / Height = 2.12 m * Payload = 28,340 kg * Total weight = 36,000 kg ... Air suspension, used vehicle, incl. VAT.

Condition: used, overall weight: 36,000 kg, maximum load weight: 29,523 kg, axle configuration: 3 axles, loading space length: 7,400 mm, loading space width: 2,350 mm, loading space height: 1,400 mm, loading space volume: 24 m³, first registration: 05/2020, next inspection (TÜV): 05/2025, Equipment: ABS, * ABS * Lift axle * 2-wire air connection * Fold-down underride protection * 5-chamber taillights * SAF axles ----Body: Steel light, platform, lowering body supports, SAF axles, air lift, roll-up tarpaulin, tailgate seal + locking ---- Odometer on axle approx. 277,000 km Cgjb Hbov S Scco Euaot Sale to businesses only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE REGARDING EQUIPMENT AND ACCESSORIES. Our Terms and Conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders, and sales discussions (see Legal Notice).

Condition: used, overall weight: 39,000 kg, empty load weight: 6,400 kg, maximum load weight: 32,600 kg, axle configuration: 3 axles, loading space volume: 57 m³, first registration: 01/1900, suspension: air, tire size: -, Year of construction: 1900, * Volume 57.3 m3 * Aluminum rims * Spare tire carrier * Side tarpaulin * Universal 2-leaf door * 2 hatches * Aluminum gangway * Automatic pneumatic brake system * Lifting 1st axle * 4 LED work lights * PVC trunk * Tool holder * 3.5m aluminum ladder * Self-suspension lowering system * Towing hitch Cob Hb Ejwabxbeuasgt * 1170 mm hitch height * 6mm floor * 4mm sides * 50L water tank * Internal dimensions 10.60 x 2.41 x 2.20 m Lifting axle Tire information: GOOD YEAR 385/65R22.5 Surface area: 25.546 m² Width: 2.41 m Height: 2.2 m Grain tipper Body: Aluminum Door: Universal Manufacturer Condition: New

Condition: used, overall weight: 39,000 kg, maximum load weight: 33,117 kg, axle configuration: 3 axles, loading space volume: 48 m³, first registration: 05/2022, next inspection (TÜV): 05/2025, Year of construction: 2022, total width: 2,550 mm, total height: 3,635 mm, Equipment: ABS, According to our "General and interpreted terms and conditions" without any guarantee & warranty, we can offer you the following vehicle today, subject to change until completion, errors, typos & prior sale reserved: Schmitz approx. 48 cbm grain troughs (wagon 742) Type SKI 24L 9.6 EZ: July 22nd, 2022 Tires 1.) approx. 50/50%, 2.) approx. 70780%, 3.) approx. 50/40% TÜV Body length approx. 9,767 mm Body width approx. 2,440 mm Side wall height approx. 2,000 mm Loading height approx. 3,635 mm Total weight 36,000/ 39,000 kg Payload 30,117/ 33,117 Kg Empty weight approx. 5,885 kg Fifth wheel height 1,260 mm Wheel base 6,600 mm Axle spacing 1,310/ 1,310 mm Tires 385/65R22.5 Loading volume approx. 47.2 m3 Broom and shovel holder driver's side middle Plastic storage box Air suspension with lifting & lowering Partly with dust bag ALCOA LM rims Chrome caps on the wheel nuts 2 x LED reversing lights 2 x 12 ton 2-speed geared support winches 2 x wheel chocks Grain pusher Roll tarpaulin, platform Slight damage to the outer skin on the left and right Automatic tipping lowering Cgob Hb Eusv T Eydeaet Low pressure cylinder 170 max 190 bar Aluminum swing flap with rubber seal Aluminum floor rear approx. 3,600 mm in 8 mm, front 7 mm Load pressure gauge Price: ¤ 12,500.00 (net) All information without any guarantee or warranty. Our "general and interpreted terms and conditions" apply. The place of jurisdiction for both parties up to a dispute value of up to ¤ 5,000.00 is the Ludwigslust District Court, for dispute values exceeding this, the Schwerin Regional Court. Errors, typos and prior sale reserved. --

Condition: used, Year of construction: 2015, Year of manufacture: 2015 GVW: 39.000 kg Tipper: Back Meiller KISA 3. Cgjb Hb Eov Uv Injuast Year: 2015. 9 Tons BPW axles. Max weight: 39.000 kg. Kingpin load: 12.000 kg. 1st axle liftaxle. Airsuspension. Mulde Hardox backwards kipper. Tyres: 385/65R22,5 60-90%. German Trailer! ID NR: 540. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: new, overall weight: 36,000 kg, maximum load weight: 28,530 kg, axle configuration: 3 axles, loading space width: 2,325 mm, loading space height: 2,285 mm, loading space volume: 48 m³, Year of construction: 2023, Equipment: ABS, Type of trailer FerroSTAR Load kingpin national (t) 12 Axle load national (t) 8 Axle distance (mm) 1310-1310 Fifth wheel height (mm) 1150 Chassis width (mm) 1400 Loading width (mm) 2325 Technical permissible total weight 39=12+9+9+9 Internal height front (mm) (IHF) 2285 Internal height rear (mm) (IHB) 2285 Volume (m³) 50 Total width (mm) 2550 Wheelbase (mm) (WB) 5800 Total length (mm) 10264 Chassis Chassis material steel Tire dimension 385/65R22.5 Loading length (mm) 8912 Axle manufacturer SAF Brake version Disc brake Brake type SAF - SBS 2220 Offset (ET) 120 Option 1st axle With lift axle and traction aid Activation of traction aid Via button in the truck Air suspension ECAS with lifting and lowering valve Lowering of air suspension Automatic lowering of the air suspension during tipping, can be manually locked via smartboard, as well as switch on the chassis Coupling head Pneumatic European Palm coupling Tire brand Manufacturer selection Rims Steel Tire type Regional distance Wheel nuts Open Wheel nut caps Plastic Landing gear Steel gear landing gear mounted on the front of the chassis, type JOST MODUL, with one-sided operation and 2 speed levels Operation of underrun protection Manual Position of smartboard Left in direction of travel, in front of the axles Tool box Dimensions of tool box - Right in front of the axles 830x500x470 Spare wheel holder Central below the chassis Design Spare wheel holder In winch design Number of mud flaps on the fender 2 pieces Manufacturer lighting Aspöck Work lights 2 pieces LED reversing lights at the rear on the left and right in the direction of travel, mounted on the lamp holder Make tipping cylinder Hyva (STAS manufacturer choice) Type tipping cylinder Hydraulic cylinder with small cover Model tipping cylinder Hyva - FC 169 Type Smartboard ECAS control box Aluminum lean-to ladder With a length of 2.8 m, attached on the right in the direction of travel Broom and shovel holder Loading pressure gauge Ø 63 mm - mounted on the side of the dashboard Mud flap underrun protection Black with STAS logo, mounted across the entire width of the underrun protection Fastening mud flap underrun protection Flexible Plastic chocks With two plastic chocks including bracket Chassis safety device - structure Rubber polyps (not for FSS 74 & 86) Air and electric console On the left in the direction of travel assembled Construction Inclination of front wall (°) 20 Ceb Hbeqaxnms Euasgt Inclination of rear wall (°) 90 Rear wall type hinged doors A-plate Foldable on the rear wall, mounted on the right in the direction of travel Floor Made from 5 mm HB450 Position of rubber pads Rubber pads attached below the floor crossbars Front wall Made from 3 mm HB450 Side wall Made from 4/3 mm HB450 Rear wall Made from 3 mm HB450 Number of hinges on rear wall 3 pairs of door hinges Design of hinged door Division 1/2 to 1/2, with 1 piece scrap lock Opening of the door wings Right door wing opens first (STAS manufacturer selection) Fastening of the opened door wings Fastening of the opened door wings is done via a chain Sealing rear wall With rubber seal in the lower area, tapering to 500 mm on the side Additional locking rear wall Pneumatic double-acting Operation of the additional locking Manually via operation on the side of the Dashboard Type Bow Made of steel in trapezoidal design, foldable Number and position of bows 1 piece Center bow (central) Tarpaulin holder Tarpaulin holder in rotating design, removable Number of tarpaulin holders 3 pieces Fron

Condition: excellent (used), axle configuration: 3 axles, first registration: 03/2000, suspension: air, color: other, Year of construction: 2000, = Additional options and accessories = - air suspension - Drum brakes = More information = Tyre profile: 50% Brakes: drum brakes Suspension: air suspension Cgjb Hb Eusval U Uoaot Serial number: YA2B37B0119137367

Condition: used, axle configuration: 3 axles, loading space length: 7,750 mm, loading space width: 2,340 mm, loading space height: 1,550 mm, first registration: 06/2021, suspension: air, color: other, tire size: 385/65R22,5, Year of construction: 2021, Equipment: ABS, = Additional Options and Accessories = - EBS = Remarks = Number of axles: 3, Tare weight: 7018 kg, Gross weight: 39000 kg, Chassis type: Complete chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body year of manufacture: 2021, Body material: Steel, Number of sides: 1 side, Drum volume: 28, Drum volume in: m3, Axle type: SCHMITZ, HARDOX = Additional information = General information Cgebev H Nr Re Hb Euaet Cabin: Day License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual transmission Axle configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tire profile left: 8 mm; Right tire profile: 9 mm Axle 2: Left tire profile: 8 mm; Right tire profile: 12 mm Axle 3: Left tire profile: 9 mm; Right tire profile: 9 mm Dimensions Dimensions (L x W x H): 870 x 250 x 380 cm Weight Unladen weight: 7,018 kg Payload: 31,982 kg GVW: 39,000 kg Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Visual condition: average Damage: none = Company information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our selection includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing fleet • Recognizable quality • A good price • Competent sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and our full inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, axle configuration: 3 axles, wheelbase: 8,330 mm, first registration: 07/2024, suspension: air, tire size: 385/55R22.5, Year of construction: 2024, Axle configuration Tyre size: 385/55R22.5 Axle brand: SAF CD Brakes: disc brakes Suspension: air suspension Rear axle 1: lift axle; Max. axle load: 9000 kg; tire profile left: 70%; tire profile right: 70% Rear axle 2: Max. axle load: 9000 kg; tire profile left: 60%; tire profile right: 60% Rear axle 3: lift axle; Max. axle load: 9000 kg; tire profile left: 60%; Tire profile right: 60% Dimensions Dimensions (L x W x H): 1136 x 255 x 380 cm Weights Empty weight: 6,280 kg Payload: 36,720 kg Cgjbjvyihxo Hb Euast GVW: 43,000 kg Maintenance APK (technical main inspection): checked until 07.2025 Identification License plate: OV-81-KN Further information Contact Bob Beukers for more information.

Condition: used, overall weight: 39,000 kg, empty load weight: 6,200 kg, axle configuration: 3 axles, wheelbase: 1,310 mm, loading space volume: 25 m³, first registration: 06/2017, next inspection (TÜV): 06/2025, color: blue, tire size: 385/65 R22,5, Equipment: ABS, Disc brakes Cob Hb Esv Tn Tasuajgt EBS Payload 32,800 kg Air-lift suspension Floor 5 mm - Sides 4 mm Electric sliding roof Marcolin Dosing system Folding underrun protection BPW axles Alcoa alloy wheels VIN No.: 392682 Errors excepted

Condition: used, Year of construction: 2014, Year of manufacture: 2014 Empty weight: 8.400 kg Carrying capacity: 26.600 kg GVW: 35.000 kg Tipper: Back Cgeb Hev Upnhsb Euaet Kempf SKM 35/3. Year: 2014. 8 tons BPW axles. Weight: 8400 kg. Load capacity: 26.600 kg. Max weight: 35.000 kg. Kingpin load: 11.000 kg. ABS EBS ALB. 1st axle liftaxle. Airsuspension. Alcoa. Dimmensions inside kipper: L: 11.250 mm. W: 2350 mm. H: 2500 mm. Kingpin height: 1200 mm. Tyres: 385/65R22,5 60%. German Trailer! ID NR: 416. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: new, overall weight: 36,000 kg, maximum load weight: 29,990 kg, axle configuration: 3 axles, loading space volume: 52 m³, Year of construction: 2024, total width: 2,550 mm, Equipment: ABS, Chassis type V-chassis Cgeb Hboupqi Es Euast Load kingpin national (t) 12 Axle load national (t) 8 Axle distance (mm) 1310-1310 Fifth wheel height (mm) 1150 Chassis width (mm) 1400 Loading width (mm) 2475 Series chassis 090 Technical permissible total weight 39=12+9+9+9 Interior height front (mm) (IHF) 2165 Interior height rear (mm) (IHB) 2165 Volume (m³) 51.8 Total width (mm) 2550 Wheelbase (mm) (WB) 6800 Total length (mm) 10656 Chassis Chassis material aluminum Tire dimension 385/65R22.5 Loading length (mm) 9665 Axle manufacturer JOST (STAS manufacturer selection) Offset (ET) 120 Option 1st axle with lifting axle and traction aid Activation of traction aid via button in the truck (installation of button is not part of the equipment) and by pressing the brake pedal three times Option 3rd axle with lifting axle and Optiturn Activation of the additional lifting axle Control via Wabco Smartboard Brake pad wear indicator connected Tire pressure monitoring Wabco Trailerpulse Air suspension ECAS with raising and lowering valve Automatic lowering of the air suspension during tipping, can be manually locked via smartboard, as well as switch on the chassis Coupling head pneumatic European Palm coupling Tire brand Manufacturer selection Rims Alcoa Dura Bright Tire type Regional distance Wheel nuts Open Wheel nut caps Chrome with STAS logo Landing gears Weweler as steel geared landing gears, type Weweler, with compensating feet, one-sided operation and 2 speed levels Manual operation of underrun protection Black underrun protection mud flap with STAS logo, mounted across the entire width of the underrun protection Fixed underrun protection mud flap attachment Underrun protection cover with covers Handle on underrun protection EBS operation control console Left in direction of travel, in front of the axles Tool box Position of tool box in direction of travel left in front of the axles Material of tool box - left in front of the axles plastic Dimensions of tool box - left in front of the axles 860x520x500 Type of mudguard Domar STAS with white line Number of mud flaps on mudguard 2 pieces Type of mudguard Clear Pass Manufacturer of lighting Aspöck Type of lighting ECOLED II Work lights (operated via switch) 2 pieces LED reversing lights at the rear in direction of travel left and right, on the last crossing of the chassis (controlled via Reverse signal) Position of work lights (operated via switch) 2 LED reversing lights at the front on the left and right in the direction of travel, mounted in the area of the support winches Make of tilt cylinder Hyva (STAS manufacturer selection) Type of tilt cylinder Hydraulic cylinder with large casing Cylinder tilt angle Normal ±47° Model of tilt cylinder Hyva - FC 169 Lift of tilt cylinder 7130 Tipping cylinder max. pressure 250 Surface treatment of the cylinder stages Standard surface treatment Hydraulic coupling Rotary coupling Hydraulic coupling - size 1" Hydraulic coupling - gender Female Hydraulic coupling - hose 2,500 mm Type of Smartboard Standard Air connection on the left in the direction of travel, on the lamp holder Aluminum leaning ladder 3 m - on the right in the direction of travel Fastening of leaning ladder for rear entry with hook for hanging Broom and shovel holder with 3 holders each, mounted on the chassis on the left in the direction of travel Two plastic chocks including bracket Safety catch Chassis - construction rubber polyps (not on FSS 74 & 86) Air and electric console mounted on the right in the directi

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2021, total width: 2,550 mm, total height: 3,900 mm, Equipment: ABS,

Condition: used, overall weight: 42,000 kg, maximum load weight: 34,725 kg, axle configuration: 3 axles, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 50 m³, first registration: 10/2024, next inspection (TÜV): 10/2025, Year of construction: 2024, total width: 2,550 mm, total height: 3,672 mm, Equipment: ABS, STAS 3-axle HardoX steel tipper 50 cbm First registered 10/2024, condition as NEW Dimensions i.L. (LxWxH) 8,912 x 2,350/ 2,450 x 2,285 mm (conical design in width) Empty weight only 7,275 kg Z-chassis cranked design Floor throughout in 5 mm HardoX steel HB450 Front wall and side walls 4/ 3 mm HardoX steel HB450 Sloping front wall, inside with access 2-wing portal doors, pneumatic post-release 1 piece GRAIN SHIFT in the right-hand door wing Ceb Hovuhcqjb Euasgt Roof roll tarpaulin reinforced design, CENTRAL LOCK HYVA tipping ram type Alpha, suitable for high and low pressure ALUMINUM saddle supports full load 2x air vibrators below the body SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE with traction aid WABCO trailer EBS with anti-skid protection RSS WABCO Smartboard, automatic tipping lowering Lifting and lowering device Tires 385/65 R 22.5 ALCOA aluminum rims Dura-Bright high gloss Aluminum stepladder Shovel and broom holder Toolbox on the right 4x LED reversing lights RENTING is the new BUYING, also available immediately from us in FULL-SERVICE RENTAL-----

Condition: used, axle configuration: 3 axles, wheelbase: 8,330 mm, first registration: 07/2024, suspension: air, tire size: 385/55R22.5, Year of construction: 2024, Axle configuration Tyre size: 385/55R22.5 Cob Hb Euovyihfsaogt Axle brand: SAF CD Brakes: disc brakes Suspension: air suspension Rear axle 1: lift axle; Max. axle load: 9000 kg; tire profile left: 70%; tire profile right: 70% Rear axle 2: Max. axle load: 9000 kg; tire profile left: 60%; tire profile right: 60% Rear axle 3: lift axle; Max. axle load: 9000 kg; tire profile left: 50%; Tire profile right: 50% Dimensions Dimensions (L x W x H): 1136 x 255 x 380 cm Weights Empty weight: 6,280 kg Payload: 36,720 kg GVW: 43,000 kg Maintenance APK (technical main inspection): checked until 07.2025 Identification License plate: OV-77-KN Further information Contact Bob Beukers for more information.

Condition: used, overall weight: 39,000 kg, empty load weight: 6,560 kg, maximum load weight: 32,440 kg, axle configuration: 3 axles, loading space volume: 54 m³, first registration: 06/2007, suspension: air, tire size: -, Year of construction: 2007, * Volume: 54.7 m3 * Gangway * Side tarpaulin * 2 hatches * Side release Csb Hb Euev Urn Rsajgt * Manual BAE * PVC trunk * Disc brakes * Spare wheel * Interior dimensions 10.60 x 2.45 x 2.10 m Grain tipper Body: Aluminum

Condition: good (used), axle configuration: 3 axles, wheelbase: 6,870 mm, first registration: 06/2016, Year of construction: 2016, Axle Configuration Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Dimensions Dimensions (L x W x H): 956 x 255 x 335 cm Weights Unladen weight: 5,010 kg Payload: 36,990 kg GVW: 42,000 kg Functional Tipper: Rear Condition Technical condition: Good Visual condition: Good Further information Contact John de Koning or Mark de Koning for further information. Csb Hbev Uw H Se Euajgt

Condition: new, overall weight: 36,000 kg, maximum load weight: 30,090 kg, axle configuration: 3 axles, loading space volume: 47 m³, Year of construction: 2024, total width: 2,550 mm, Equipment: ABS, agroSTAR 47.6 m³ Chassis type: V-Chassis National kingpin load (t) 12 National axle load (t) 8 Axle base (mm) 1310-1310 Fifth wheel height (mm) 1175 Chassis width (mm) 1400 Loading width (mm) 2475 Standard chassis: 080 Technical permissible total weight 39=12 9 9 9 Front interior height (mm) (IHF) 2165 Rear interior height (mm) (IHB) 2165 Volume (m³) 47.6 Overall width (mm) 2550 Wheelbase (mm) (WB) 5800 Overall length (mm) 10259.9978 Chassis Chassis material: Aluminum Tire dimensions 385/65R22.5 Loading length (mm) 8880 Axle manufacturer JOST (STAS manufacturer selection) Ceb Hotb Tqpob Euajgt Brake type JOST - DCA-T7 Offset (ET) 120 Optional 1st axle with lifting axle and traction aid Activation of traction aid via button in the truck Optional 3rd axle with lifting axle and Optiturn Activation of the additional lifting axle, controlled via Wabco Smartboard Brake pad wear indicator connected Tire pressure monitoring Wabco Trailerpulse Air suspension ECAS with raising and lowering valve Automatic lowering of the air suspension during tipping, manually lockable via Smartboard and switch on the chassis Wheels Alcoa Dura Bright Tires type Regional spacing Wheel nut caps Chrome with STAS logo Landing gears Weweler: Steel geared landing gears, type Weweler, with leveling feet, single-sided operation, and 2 Speed levels Manual underride guard operation Towing eye: 1 piece, left in the direction of travel Black underride guard mud flaps with STAS logo, mounted across the entire width of the underride guard Fixed underride guard mud flap attachment Underride guard cover with covers Handle on the underride guard EBS control panel: Left in the direction of travel, in front of the axles Toolbox Position of toolbox: Right in the direction of travel, in front of the axles Material of toolbox - right in front of the axles: Plastic Dimensions of toolbox - right in front of the axles: 860x520x500 Type of fender: Domar STAS with white line Number of mud flaps on the fender: 2 pieces Type of mud flaps: Asphalt Manufacturer: Aspöck Type of lighting: EUROPOINT III - LED Work lights (operated via switch): 2 pieces LED reversing lights at the rear, left and right in the direction of travel, mounted on the lamp holder Work lights (operated via switch): 2 pieces LED reversing lights at the front, left and right in the direction of travel Tipping cylinder manufacturer: Hyva Tipping cylinder type: Hydraulic cylinder with small casing Cylinder tilt angle: Normal ±47° Tipping cylinder model: Hyva - FC 169 Tipping cylinder stroke: 6480 Tipping cylinder max. pressure: 250 Surface treatment of cylinder stages: Standard Hydraulic coupling: Swivel coupling Hydraulic coupling - size 1 Hydraulic coupling - gender: Female Hydraulic coupling - hose 2,500 mm Type: Smartboard: Standard Air connection: Left in the direction of travel, on the lamp holder Aluminum leaning ladder, 3 m - right in the direction of travel Leaning ladder attachment for rear entry with hooks Broom and shovel holders with 3 holders each, mounted on the chassis on the left in the direction of travel Two plastic wheel chocks including brackets Chassis safety device - body: Rubber plugs (not for FSS 74 and 86) Air and electrical console, right in the direction of travel assembled Construction End wall inclination (°) 20 Rear wall inclination (°) 90 Rear wall type combi-door A-plate on trough (not foldable) - right side Incline of the bottom chord profile inside (°) 45 Floor 8 mm ALU - 110 Brinell Rubber pads attached below

Condition: new, overall weight: 36,000 kg, maximum load weight: 29,560 kg, axle configuration: 3 axles, loading space volume: 56 m³, Year of construction: 2024, total width: 2,550 mm, total height: 3,691 mm, Equipment: ABS, EU conformity Chassis type Z-chassis Load kingpin national (t) 12 Axle load national (t) 8 Axle distance (mm) 1310-1310 Fifth wheel height (mm) 1150 Chassis width (mm) 1400 Loading width (mm) 2475 Series chassis 100 Technical permissible total weight 39=12+9+9+9 Internal height front (mm) (IHF) 2165 Internal height rear (mm) (IHB) 2165 Volume (m³) 56.1 Total width (mm) 2550 Wheelbase (mm) (WB) 7400 Total length (mm) 11522 Chassis Chassis material steel Tire dimension 385/65R22.5 Loading length (mm) 10464 KC-Value 0650 Axles SAF Axle version Intra Brake version Disc brake Brake type SAF - SBS 2220 (Haldex) Offset (ET) 120 Option 1. Axle with lifting axle and traction aid Activation of traction aid via button in the truck (installation of button is not part of the equipment) and by pressing the brake pedal three times Brake pad wear indicator connected Air bellows protection plate Air suspension ECAS with raising and lowering valve Automatic lowering of the air suspension during tipping, manually lockable via smartboard, as well as switch on the chassis Coupling head pneumatic European Palm coupling Tire brand Manufacturer selection Rims Alcoa Matt Tire type Regional distance Wheel nuts Open Wheel nut caps chrome-plated Landing gear Aluminium drop jacks attached to the front of the chassis, with individual operation on both sides, support force 20t / pair Manual operation of underrun protection Towing eye 1 piece in the direction of travel on the left Mud flap underrun protection black with STAS logo, mounted across the entire width of the underrun protection Fastening of mud flap underrun protection flexible EBS operation control console In the direction of travel on the left, in front of the axles Tool box Position of tool box in the direction of travel on the left, in front of the axles Material of tool box - left in front of the axles plastic Dimensions of tool box - left in front of the axles 830x500x470 Spare wheel holder in the direction of travel on the right, below the chassis Design of spare wheel holder in winch design Type of mud flap Domar STAS with white line Cgebeuya N De Hb Euaet Number of mud flaps on the mudguard 2 pieces Type of mud flap mudguard Clear Pass Manufacturer lighting Aspöck Type of lighting ECOLED II Work lights Position of work lights (operated via switch) 2 pieces LED reversing lights at the rear in Direction of travel left and right, mounted on the lamp holder Make of tilt cylinder Hyva (STAS manufacturer selection) Type of tilt cylinder Hydraulic cylinder with large casing Cylinder tilt angle Normal ±47° Model of tilt cylinder Hyva - FC 169 Lift of tilt cylinder 7630 Tipping cylinder max. pressure 220 Hydraulic coupling Push Pull Hydraulic coupling - size 3/4" Hydraulic coupling - gender Male Hydraulic coupling - hose Without Type of Smartboard Standard Smartboard Aluminum lean-to ladder 2.75 m - mounted on the chassis Position of broom and shovel holder On the side impact protection on the left in the direction of travel Loading pressure gauge Ø 63 mm - mounted on the side of the dashboard Water tank 1 piece Water tank with 30L volume (for washing hands) Position of water tank 30L on the right in the direction of travel, in front of the axles Two plastic chocks including holder with wheel wrench, supplied loose in the Tool box Safety device chassis - construction rubber polyps (not for FSS 74 & 86) Air and electric console mounted on the right in the direction of travel Construction Inclination of front wall (°) 90 Inclinat

Condition: new, overall weight: 36,000 kg, maximum load weight: 30,060 kg, axle configuration: 3 axles, loading space length: 9,665 mm, loading space width: 2,475 mm, loading space height: 9,665 mm, loading space volume: 51 m³, Year of construction: 2024, Equipment: ABS, Kingpin load: National 12 t Axle load: National 8 t Axle spacing: 1310-1310 mm Fifth wheel height: 1150 mm Chassis width: 1400 mm Internal height: Front 2165 mm Internal height: Rear 2165 mm Overall width: 2550 mm Wheelbase: 6800 mm Overall length: 10656 mm Chassis material: Aluminum Tires: 385/65R22.5 Loading length: 9665 mm Axles: SAF Brake type: SAF - SBS 2220 Offset: 120 Option: 1st axle with lift axle and traction aid Activation of traction aid: Via a button in the truck (installation of the button is not included in the scope of delivery) and by pressing the brake pedal three times. Brake pad wear indicator: Not connected Tire pressure monitoring system (Tire Pilot) Without Tire pressure monitoring: Wabco Trailerpulse ECAS air suspension with raising and lowering valve Air suspension lowering: Automatic lowering of the air suspension during tipping, manually lockable via smartboard and switch on the chassis Pneumatic coupling head: European Palm coupling Chrome wheel nut caps with STAS logo Landing gear: Aluminum drop legs mounted at the front of the chassis, with individual controls on both sides, support force 20 t/P Underrun protection control: Manual Towing eye: 1x in the direction of travel Underrun protection mud flaps: Black with STAS logo Underrun protection cover: Handle on the underrun protection EBS control panel: Control panel: In the direction of travel, in front of the axles Toolbox position: On the left in the direction of travel, in front of the axles: Plastic Toolbox dimensions: Left in front of the axles: 860 x 520 x 500 Type of fender: Domar STAS with white line Number of mud flaps on the fender 2x Mudguard type: Clear Pass Lighting manufacturer: Aspöck Lighting type: ECOLED II Work lights (switch operated) Position of work lights (switch operated) 2x LED reversing lights, front, left and right, in the area of the landing gear Tilt cylinder manufacturer: Hyva Tilt cylinder type: Hydraulic cylinder with large casing Tilt cylinder model: Hyva - FC 169 Tilt cylinder stroke: 7130 Tilt cylinder max. pressure: 250 Surface treatment of cylinder stages: Standard surface treatment Hydraulic coupling: Swivel coupling Hydraulic coupling - size 1 Hydraulic coupling - gender: Female Hydraulic coupling - hose 2,500 mm Smartboard Aluminum leaning ladder 3 m Left-hand ladder attachment for rear entry: With hook for hanging Position of broom and shovel holder: With 3 holders each, on the chassis on the left in the direction of travel Loading pressure gauge Ø 100 mm - mounted on the front of the chassis With two Plastic wheel chocks including bracket Chassis safety device - body rubber pads Air and electrical console, centered in the direction of travel, with boom End wall inclination (°) 90 Rear wall inclination (°) 90 Rear wall type combi-door Inner lower chord profile inclination (°) 90 Floor 8 mm aluminum - 110 Brinell Cob Hbjuar Ams Euaegt Position of rubber pads below the floor cross members End wall 4 mm (aluminum) Side wall profile 3 mm - 2 mm, smooth inside and outside, double-walled profiles 600 mm wide - 30 mm thick Rear wall aluminum Combi-door type 1/2 - 1/2 with pivoting door end cross member Door leaf opening: Right door leaf opens first (STAS manufacturer's choice) Door end cross member: Pivoting design Hinge type: With double door hinge (double-joint hinge) Slider: Rectangular design, standard Slider position 2 sliders with operating handles, one each on the left and right in the direction of travel. Securing the open door leaves. The

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 11,744 mm, loading space width: 2,325 mm, loading space height: 2,460 mm, loading space volume: 68 m³, Year of construction: 2024, Equipment: ABS, Tipping semi-trailer, type FSS, ferroSTAR system Weights Total weight of the trailer: 36,000 kg Semi-trailer load approx.: 11,000 kg Axle load 3 x: 9,000 kg Dimensions Loading length: 13127 mm Loading width: 2325 mm Side height: 2,460 mm Volume approx.: 68 cbm Axles: 3 SAF disc brake axles, CD version, with a load capacity of 9 t each, ET 120 BVA sensors: connected Rims: Aluminum rims, type Alcoa Dura Bright, 11.75 x 22.5, press-in depth 120 mm, 26 mm bore, incl. chrome-plated wheel nut caps Tires: 6 tires, 385/65 R 22.5 steep shoulder Axle lift: Installation of an axle lift on the left and right side, on the 1st axle, Electric gearshift (without tractor equipment), load-dependent with starting aid Suspension: Air suspension on all 3 axles, with 350 mm air bellows, all air reservoirs made of aluminum, with automatic lowering when tipping via button in the chassis - lockable, type chassis - lockable, type ECAS Brake system: SAF disc brake type - SBS 2220 (Haldex) EBS: Installation of a WABCO EBS E-brake system with RSS (Road Stability Support), incl. Wabco Smartboard Lift & lowering valve: 1 lift and lowering valve mounted on the side of the dashboard, type ETASC Loading pressure gauge: 1 loading pressure gauge at the front on the chassis Lighting system: complete lighting system in accordance with STVZO with 2x1 LED five-chamber lights ECOLED II (position lights flashing with direction indicator), separate license plate light in the middle, LED marker lights on the right and left at the end of the chassis, console with 2 x 7-pin socket and 1 x 15-pin socket in the direction of travel right Reversing lights: 2 LED reversing lights, switchable via switches on the dashboard, mounted at the rear on the left and right of the lamp holder in the direction of travel. mounted on the lamp carrier Working lights: 2 LED reversing lights, switchable via switches on the dashboard, mounted at the front on the left and right in the direction of travel in the area of the support winches Collision protection: with aluminum profiles, according to STVZO Underride guard: made of steel, hinged to the rear of the chassis, attached to chain fasteners with rear apron, manual version Mudguards: individual plastic mudguards on all 3 axles, fitted with flexible spray absorber (splash guard) on the 3rd axle Support winches: 1 pair of steel geared support winches attached to the front of the chassis, type JOST, lifting capacity 24 tons/pair Body: welded construction using high-quality HARDOX 450 (alternatively HB 450 sheets, same material quality, from other high-quality suppliers) and fine-grained steel sheets, new model model Floor: made from 5 mm HB450 Cgobsuva N Us Hb Euaet Side walls: profiled version made of 4/3 mm HB450 End wall: End wall made of 3 mm HB450 Rear wall: made of 3 mm HB450 Steps: 4 steps, on the left in the direction of travel, attached to the inside of the front wall Tipping system: consisting of a multi-stage tipping jack as front cylinder, low-pressure jack 170 bar Hyva, Alpha version, 1" EDBRO coupling/wing nut incl. hydraulic hose (approx. 2,100 mm), incl. hose protection Air shaker: 2 air shakers underneath the body, 1x front center and 1x center, actuation via push button on the left side of the chassis in the direction of travel Walkway: On the chassis with access ladder and safety bar, aluminum ladder on the left in the direction of travel left in direction of travel, STAS aluminum catwalk version Plane frame: consisting of 3 cent

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,890 mm, loading space width: 2,460 mm, loading space height: 2,100 mm, loading space volume: 51 m³, Year of construction: 2024, Equipment: ABS, Dimensions and Weights Overall length 11,087 mm Interior length at the center of the trough height 9,890 mm Floor length 9,270 mm Overall width 2,550 mm Interior width at the center of the trough height 2,460 mm Interior width at the top frame 2,350 mm Overall height to top frame 3,500-3,550 mm Overall height to tarpaulin tip 3,660-3,710 mm Interior height 2,100 mm Track width 2,040 mm Distance: Kingpin 2nd axle 6,810-6,710 mm Fifth wheel height 1,150-1,200 mm Axle spacing 1,310-1,410 mm Rear overhang 1,362 mm Floor height 1,400-1,450 mm Max. height with tipped trough 9860-9910 mm Total weight 36,000 kg Technical gross weight 42,000 kg Axle load 8,000 kg Technical axle load 9,000 kg Fifth wheel load 12,000 kg Technical fifth wheel load 15,000 kg Load volume 51.1 m3 Manufacturer designation for homologation NW-3 nd Unladen weight 6,273 kg The weight is specified with an accuracy of +/-3% - nd Chassis Axle base 1310 Distance: Kingpin 2nd axle: 6,810 mm Steel underrun protection Foldable underrun protection at the rear Chassis frame with lowered gooseneck frame, longitudinal members with retracted fifth wheel plate area. Welded construction, weight-optimized from high-strength S700 steel. Side impact protection made of aluminum profiles in accordance with ECE 73 2 plastic wheel chocks Axles and Suspension 1 150 mm fifth wheel height unloaded Number of axles: 3 AX00001A Rigid axles SAF disc axles 3x9000 kg 22.5 INTRADISC CD 1st lift axle Support legs SAF Hercules 2-speed transmission supports, full load Fenders Solid PVC fenders - 6 pieces Rubber mud flaps with Wielton logo behind the third axle Wheels 6 aluminum rims 22.5x11.75 ET-120 brushed Tires 6 tires 385-65-22.5 GOODYEAR 385-65-22.5 KMAX G2 T M+S 3PMSF Rolling resistance: B Wet grip: C External rolling noise: 71 dB or Rolling resistance: B Wet grip: B External rolling noise: 70 dB Other chassis equipment Aluminum ladder L=2, 840 mm Shovel and broom on the chassis, above the fender Dust bag (1 pc.) Water tank - 30 L (Mounted on the chassis in the middle (right side)) Dust bag holder on the chassis - 1 pc. Toolbox - 165 L (Mounted on the chassis in the middle (left side)) Extendable ladder at the rear Body Combi door Volume 51 m3 Side walls SL, inner thickness 2.5 mm, fully welded Front wall inclined at 20 degrees Pallet width version 5/7 mm floor Two-wing aluminum combi door, aluminum (1/2 + 1/2) vertical with portal beam 2 grain pushers Internal height 2,100 mm Tension locks at the bottom - 2 pcs. Floor Cross member spacing below the floor: 360 mm Polyp body damper Other body equipment Tensioning chain between the side walls Operating station on the chassis frame, access in FR on the left (driver's side) Cover PVC roll-top tarpaulin 680 g/m² with quick-release fastener and aluminum winding tube (for vertical rear end with front and rear extension triangles, center tube welded into the tarpaulin) Braking system/Pneumatics Aluminum air chamber Spring-loaded pressure gauge Automatic lowering when tipping, can be switched off Wabco braking system 2S/2M Chassis paint finish Chassis paint finish RAL 7021 (black gray) Body paint finish Body paint finish RAL 9006 (white aluminum) Tarpaint finish Tarpaint finish RAL 9006 (White aluminum) Hydraulics HYVA hydraulic cylinder, top eyelet mounting 1" hydraulic connection kit Electrics LED reversing lights - 2 pcs. Full LED lighting 2x7-pin + 1x15-pin with EBS connection, without connecting cables to the tractor unit 2 LED work ligh Cgsbouuv Hgo Hb Euast

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, Year of construction: 2024, Equipment: ABS, Chassis type V-chassis Load kingpin national (t) 12 Axle load national (t) 8 Axle distance (mm) 1310-1310 Fifth wheel height (mm) 1150 Chassis width (mm) 1400 Loading width (mm) 2475 Technical permissible total weight 39=12+9+9+9 Internal height front (mm) (IHF) 2165 Internal height rear (mm) (IHB) 2165 Volume (m³) 56.1 Total width (mm) 2550 Wheelbase (mm) (WB) 7400 Total length (mm) 11455 Chassis Chassis material aluminum Tire dimension 385/65R22.5 Loading length (mm) 10464 Axle manufacturer JOST Brake version disc brake Offset (ET) 120 Option 1st axle with lifting axle and traction aid Option 3rd axle with lifting axle and Optiturn Activation of the additional lifting axle Control via Wabco smartboard Brake pad wear indicator Connected Tire pressure monitoring Wabco Trailerpulse Air suspension ECAS with lifting and lowering valve Lowering of air suspension Automatic lowering of the air suspension during tipping, can be locked manually via smartboard, as well as switch on the chassis Coupling head pneumatic European Palm coupling Rims Alcoa Dura Bright Wheel nut caps chrome with STAS logo Landing gears Weweler As steel geared landing gears, type Weweler, with compensating feet, one-sided operation and 2 speed levels Operation of underrun protection Manual Operating console EBS operation On the left in the direction of travel, in front of the axles Tool box With Position of toolbox In the direction of travel, on the left, in front of the axles Material of toolbox - Left in front of the axles Plastic Dimensions of toolbox - Left in front of the axles 860x520x500 Type of mudguard Domar STAS with white line Number of mud flaps on the mudguard 2 pieces Type of mud flaps on the mudguard Clear Pass Csbouva Nbe Hb Euaegt Manufacturer of lighting Aspöck Type of lighting ECOLED II Work lights (operated via switch) With Position of work lights (operated via switch) 2 LED reversing lights at the rear in the direction of travel, left and right, on the last crossing of the chassis (controlled via reversing signal) Position of work lights (operated via switch) 2 LED reversing lights at the rear in the direction of travel, left and right, mounted on the lamp holder Position of work lights (operated via switch) 2 LED reversing lights at the front in the direction of travel, left and right, mounted in the area of the support winches Manufacture of tipping cylinder Hyva (STAS manufacturer selection) Type of tipping cylinder Hydraulic cylinder with large Cover Cylinder tilt angle Normal ±47° Model tilt cylinder Hyva - FC 169 Lift cylinder stroke 7630 Tipping cylinder max. pressure 220 Surface treatment of cylinder stages Standard surface treatment Hydraulic coupling Rotary coupling Hydraulic coupling - size 1" Hydraulic coupling - gender Female Hydraulic coupling - hose 2,500 mm Type Smartboard Standard Smartboard Air connection Left in direction of travel, on the lamp holder Aluminum leaning ladder 3 m - right in direction of travel Fastening leaning ladder for rear entry With hook for hanging Broom and shovel holder With Position of broom and shovel holder With 3 holders each, mounted on the chassis on the left in direction of travel Plastic chocks With two plastic chocks including holder Safety device Chassis - structure Rubber polyps (not for FSS 74 & 86) Air and electric console Mounted on the right in direction of travel Structure Inclination of front wall (°) 90 Incline of rear wall (°) 90 Rear wall type combi-door A-plate With A-plate on the rear wall (foldable) Incl