Fray DIE Cutter

ABA G100

Condition: new, Year of construction: 2025, BOOK CASE ROUNDING MACHINE Dedpfsfhgzbjx Addecr MAGRAF SK-46

Condition: good (used), Renz DTP 340M perforator Machine in very good condition, ready for production. Renz PBS 340 included, no waste container. Electric perforation device for a closed, screwed or plastic spine spiral by the German company RENZ: • Device for perforating paper, cardboard or PVC with a working width of 340 mm, activated by a foot pedal • Perforation of up to 35 sheets in one cycle (depending on the module) • Quick and easy replacement of strips • possibility of equipping with strips with square, round and oval holes of various sizes • Possibility of using strips with a recess for a hanger • All perforation strips for a closed spiral are standardly equipped with the option of individual needle shut-off without the need to remove the strip from the device • Possibility of connecting the manual WBS 360 clamping module to the device Technical parameters: Dcodpfx Aevkt Ideddjr Max. length of perforated material: 340 mm Max. thickness of perforated material: 3.5 mm (up to 35 sheets) Dimensions: 36 x 49 x 25 cm Power supply: 230 V / 50 Hz Net weight: 40 kg Pitch: 2:1, 3:1 (depending on the type of strip installed) The set includes a tool with a hole Fi= 6mm, 2:1.

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 3392-014, Format (cm): 76 Equipment / Additional information: Dcsdpfx Adewmlc Dsdor Side tables, air table, 1xreserve knife

Year of construction: 2013, condition: good (used), • Max Sheet Size: 1,060 x 760 mm • Min Sheet Size: 400 x 350 mm • Max Cutting Size: 1,060 x 745 mm • Gripper Margin: 10 mm • Max Mechanical Speed: 7,700 sheets/hour • Paper Range: o Paperboard: 90–2,000 g/m² o Corrugated board: up to 4 mm (depending on flute) • Cutting Force: 260 tons • Pile Height (Feeder/Delivery): o Feeder: up to 1,350 mm o Delivery: up to 1,150 mm • Feeder Type: Non-stop • Delivery Type: Non-stop Dcsdpfx Adsw E Iumjdjr • Register System: Optical and mechanical sheet alignment • Die-Cutting Plate Size: 1,080 x 760 mm

Condition: used, Year of construction: 1998, Offset 2 color Shinohara 66-2 Year: 1998 Number of impressions (mio): 79 Machine control - Shinohara console Printing units Dedpfx Aewahvajddjcr - Number of printing unit(s): 2 - Straight machine - SAPC Semi Automatic Plate Change - Cooling system - Dampening system: Shinohara Delivery - Standard delivery - Powder spray: OxyDry Accessories - Plate bender: on delivery Max. output (s/h): 11000 Max. sheet size (mm): 483 x 660 Min. sheet size (mm): 200 x 296 Max. paper thickness (mm): 0,4

Condition: new, Year of construction: 2025, ML750 Inner chase size 750 X 520 mm Max. die cutting size 750 X 520 mm Working speed 28±2 s/min Max. rule length ≤15 m Dcedpfjvv R H Ujx Addor Motor power 2.2 kW Weight 2000 kg Overall machine dimensions 1650 X 1540 X 1650 mm

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Djdpswypp Iefx Addocr Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Condition: excellent (used), Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Dcedpjh Eibaofx Addjr Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Condition: used, Faltschachtelklebemaschine / Folder Gluer Bernhardt FKB 700 Baujahr/ Year 2010 - Serial-No. 300310/86/FKB/700 Produktionsmöglichkeiten Längsnaht, 2 und 3-Punkt Grammatur 200 - 600 g/m2, E-Welle Materialien festes Papier ab 200 g/m2, Karton Plastik / Materials: strong paper from 200 g/m2, cardboard plastic Format offener Zuschnitt 500 x 700mm Luftanschluss benötigt / Air required min. 6bar Maschinengeschwindigkeit / Machine Speed max. 400 m/min. Die FKB 700 ist eine multifunktionale Faltklebemaschine für das Falten und Kleben von: Mappen, CD-Hüllen, DigiPacks und Faltschachteln. The FKB 700 is a multifunctional folding and gluing machine for folding and gluing: Folders, CD cases, DigiPacks and folding boxes. Dedpfx Aov H D Sreddecr Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2003, Brochure production line Horizon VAC 100 A+M (year 2009) with stitching-folding station SPF 20A and trimmer FC 20A Dodpsv Sqr Nofx Addscr