Reel

OBRU HR

Condition: new, Year of construction: 2025, Manual pan & box brake SM 1270x2 mm is a machine for bending different elements from the metal sheets with maximum length 1270 mm and maximum metal thickness 2mm. Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But manual pan & box brake SM 1270 thanks to special segmented bars can bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisted of parts with different lengths. So you can adjust it to the length you need to bend boxes and cassettes from all four sides. There are models of manual pan & box brakes we produce: Manual pan & box brake SM-1270 x 2mm Manual pan & box brake SM-1550 x 1.8mm Manual pan & box brake SM -2020 x 1.2mm Those manual box & pan brake in standard set have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle up to 135 degrees. The standard set of manual pan & box brake SM includes: Tedpfef Eywwsx Ac Nef - Manual box & pan folder - Angle measuring device - Four position angle limiter - Two segments with side cuts to bend cassettes with inside bends. As an additional option you can get: -Third segmented bar -Segments tempering option (in standard set pan & box brake’s segments go not tempered, but if you work with metal thickness more than 1mm we advise to temper one- so rigidity of segments will be higher and usage time of machine longer); - Change of upper segments height (from 30 to 45mm). So it lets to bend cassettes with height up to 45mm instead of 30mm. - Cross cutting knife. Designed for cutting metal sheets before bending them with folding machine. The maximum metal thickness for cutting is 0.8mm; - Multifunctional acceptance table to adjust different length limiters in different parts of bending machine. So it lets to save your time while same sizes cassettes or elements production. Dimension: 160.00Sm x 82.00Sm x 120.00Sm Weight: 350.00Kg

Condition: new, Year of construction: 2025, CFM-01 MACHINE FOR CUTTING PROFILES The machine has been designed for cutting profiles used for P20 or P30 ventilation ducts and fittings. The cutting quality is very high, it does not leave any burrs after cutting. Cutting that can be made in any length thanks to the ruler adjustable from 0-1500 mm. The diamond blade used is many times longer than band saws. The machine has a system of pneumatic cylinders responsible for the movement of the disc and material pressure. Thanks to the foot pedal, it provides quick and convenient cutting of profiles. Tjdpfxsfwxxns Ac Nsf

Condition: new, Year of construction: 2025, Technical specifications: - max. Thickness of cut sheet 1.2mm, - max. Working width: 3000 mm - in the equipment there is a stop for adjusting the cutting depth and a frame for holding the plate. - the extension table makes it easy to carry large-format metal sheets on the table - measuring table with graduation - robust and compact steel construction - high-quality, durable steel knives - extremely stable and heavy construction of cast iron - ground and hardened plate shear knives - Back gauge system - CE mark - declaration of conformity open design suitable for endless cuts Tedpfx Ajda I Ihoc Nsf large cast work table engine power 2,2 kW oil HL 46 pressure force 4t working pressure 120-150 bar has hydraulic compensators from the cutter bar up Dimensions: Length: 3500 mm Width: 750 mm Height: 1150 mm Weight: approx. 1000 kg

Year of construction: 1996, condition: good (used), machine/vehicle number: 01049, Offer 22461 Technical data: - nominal power at 50% ED 35 kVA - max welding power 75 kVA - throat adjustable 280 to 600 mm - stroke 5 to 50 mm - Welding values sheet steel approx. 4 + 4 mm - electrode force adjustable up to 44,5 daN - cooling water quantity 4 l/min - connection 400 V - Space requirement approx. W 800 x H 1700 x D 1050 mm - weight approx. 220 kg Tsdpjimbmrefx Ac Njf - with: - single-phase control T 90 Mark II - foot switch

Condition: new, Metallkraft FSBM 1020-20 S2 Manual swing bending machine With workpiece clamping by means of foot pedal. DESCRIPTION - Workpiece clamping by foot pedal, leaving both hands free for material feeding - Different tool variants available E, S2, HS2 and HSG - The powerful auxiliary cylinder facilitates bending - Wide clearance between upper and lower beam of up to 25 mm - Self-lubricating slide bearings - Clamping pressure of the upper beam easily adjustable by means of easy-grip knurled screws - Adjustment of material thickness by knurled screw - Adjustable stop for bending angle Equipment details: - With segmented sharp bending tools, segmented bending bar and continuous bed support TECHNICAL DATA General information Working width max.: 1020mm Bending angle max.: 135 Segmentaufteilung: 25-30-35-40-45-50-75-100-150-200-270mm Dimensions and weights Tjdpfekzk Exex Ac Nsf Length (product) approx.: 1350mm width/depth (product) approx.: 800mm Height (product) approx.: 1130mm Weight (net) approx.: 325kg Bending capacity bending capacity 235 N/mm²: 2,0mm Bending capacity 700 N/mm²: 1,2mm Explanation Bending capacity: 700 N/mm²Hardened upper tools are required for bending VA Bending capacity aluminum: 2.4mm Made in China PLEASE ASK FOR OTHER MODELS

Condition: new, Pressure capacity 40 t Folding length 1270 mm Clearance between the uprights 980 mm Projection 200 mm Tsdpfx Acogiud Hs Nsf Installation height 320 mm Stroke 100 mm Working speed 10 mm/s Drive power 4 kW Dimensions L x W x H approx. 1950 x 1450 x 2100 mm Weight approx. 3200 kg Accessories / special features: - Manual operation for the motorized plunge depth and the backgauge o Ball screw spindles o Fine adjustment via handwheel - Top tool PM 1, consisting of 1 x 835 mm and 1 x 435 mm, slightly cranked, R=0.8 mm, pressure load 100 t/m, tip 88° - Universal die 50 x 50 mm with several V-openings - Back gauge with ball screws, length = 600 mm - Only one working speed 10 mm/s for all vertical movements, therefore no light barrier is required! - Front support arms - Suspended control panel - Paint finish: dark gray RAL 7031, light gray RAL 7035, yellow RAL 1033 - Operating instructions - CE-compliant Delivery time: approx. 2-3 months after receipt of order plus pre-freight costs China - Germany Exclusive representation! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Year of construction: 2001, operating hours: 123 h, condition: ready for operation (used), machine/vehicle number: 123, Metal silo for storage of woodchips, etc. Technical description: silo DM: 5m Height: 8 m with outfeeding unit (screw conveyor connection to output) Tjdpfjftdv Usx Ac Nof Cappacity: 42 m3 With outfeeding transport screw conveyor to the top of the silo building. Already dismountled, visit possible by appointment at our warehouse H-2013 Pomáz/Hungary.

Condition: good (used), machine/vehicle number: RTT HAU T3, Used rotary table polishing machine Tedpfxjh Ug Ulj Ac Njf Manufacturer: Hau Rotary table with 6 working spindles and 3 polishing stations with high pressure guns, 5,5 kW motors, control cabinet

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, turning diameter over cross slide: 415 mm, turning length: 850 mm, turning diameter: 390 mm, spindle bore: 105 mm, spindle speed (max.): 2,000 rpm, travel distance X-axis: 225 mm, travel distance Z-axis: 950 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, total height: 1,980 mm, total length: 4,600 mm, total width: 1,900 mm, quill diameter: 100 mm, quill stroke: 120 mm, overall weight: 7,000 kg, bar passage: 90 mm, chuck outer diameter: 300 mm, controller manufacturer: Siemens, controller model: 828D + Shopturn, Equipment: documentation/manual, max. turning diameter 390 mm Z-axis travel: 950 mm max. spindle speed: 2000 rpm AC spindle motor SIEMENS (cont./15min) 25/33 kW bar capacity: 90 mm spindle nose: A2-11 Including accessories a. o: SAUTER 12-station turret VDI-40 Trifix holder for driven tools Todpefk Et Asfx Ac Njf C-axis with spindle clamping and stabilization Wide and stable flat guides 45° inclined bed for optimum chip fall Hinged belt chip conveyor with chip bucket 3-jaw Kitagawa power chuck ø 300 mm Tool measurement can be swiveled in manually Hydraulic tailstock manually adjustable with programmable tailstock quill Coolant unit with powerful pump (4 bar) Rittal filter fan on the control cabinet

Year of construction: 1977, condition: refurbished (used), I sell the double mitre saw Rapid DGS, year 1977. Tilting heads Tedpfx Aed N Rb Dec Njf Drilling front heads on each side included Very good condition. Available immediately.