Switchgear & control

ABB + Siemens 70MW

Condition: excellent (used), Year of construction: 2014, operating hours: 31,347 h, functionality: fully functional, power: 800 kW (1,087.70 HP), Equipment: documentation/manual, MWM CHP plant for decentralized electricity and heat generation in electrically controlled, grid-connected operation Controllability 50-100% Technical specifications: Electrical output in kW (electrical): 800 Podsxfgxbjpfx Afhjpl Efficiency: Electrical: 42.3% Thermal: 45.5% Total: 87.3% Emission values: NOx 500 mg/Nm³

Condition: used, Year of construction: 2008, For sale, we offer an MTU combined heat and power (CHP) plant with 1.2 MW electrical output. Pedjxcwlaepfx Afhepl Technical details: Manufacturer: MTU Engine: MTU 12V4000L62 Generator: Stamford Year of manufacture: 2008 (completely overhauled in 2015) Operating hours: 63,000 Including control cabinets Including dry cooler

Condition: used, Year of construction: 1994, Technical details: production capacity: 2x 4,8 MW number of Generators: 2 Stück fuel tank capacity: 480 m³ type of fuel: Gas + Öl Complete Power Plant 2 combustion engines 12 cyl V -Motor Make Maschinenwerke Halberstadt Type: 12 VDG for oil and gas 2 Generators Make Leo Somer with: - electrical capacity 4,6 MW each - mechanical capacity 4,8 MW each - thermal capacity 4,8 MW each - 2 recovery boiler - Stromeinspeisung: Mittelspannung 10 KV (direkt ins Netz) Ppedpfxsu Nxato Afhol furthermore: heat exchanger, catalyst, control room, medium high voltage system, oil preparation plant, intermediate storage tank + fuel depot tanks 4,8 m³ *

Condition: ready for operation (used), Year of construction: 2018, operating hours: 60,000 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, power: 3,028 kW (4,116.93 HP), empty load weight: 10,000 kg, fuel: domestic gas H, control cabinet height: 2,000 mm, control cabinet length: 600 mm, control cabinet width: 800 mm, nominal power: 2,679 kW (3,642.42 HP), rotational speed (min.): 1,500 rpm, type of cooling: water, GE Jenbacher JMS 616 GS-N.L Gas CHP Unit Fuel Type: Natural Gas Electrical Output: 3,065 kW Thermal Output: 2,420 kW Total Efficiency: 85.6% Electrical Efficiency: 42.9% Thermal Efficiency: 42.7% Voltage: 690 V Frequency: 50 Hz RPM: 1,500 Ppodpfewptfrex Afhol Engine Configuration: V16 (60° angle) Bore x Stroke: 190 mm × 220 mm Displacement: 99.8 L Fuel Consumption: Approx. 597 Nm³/h (at LHV 9.5 kWh/Nm³) Noise Level: 101 dB(A) at 1 metre Dry Engine Weight: approx. 10,000 kg Dimensions (L×W×H): 8,300 × 2,200 × 2,800 mm ⚙️ Included Equipment Turbocharged engine with intercooler STAMFORD LVSI 804 W alternator (rated 3,555 kVA) LEANOX control system Electronic ignition system Full lubrication system (pump +filters) Heat exchangers for coolant and oil Control panel with visual interface Pre-heating system Gas train according to DIN-DVGW standards

Condition: like new (used), Year of construction: 2023, operating hours: 50 h, functionality: fully functional, machine/vehicle number: Exhaust gas cleaner, Type: Containerized Mobile Exhaust Gas Aftertreatment System Brand: MTU Rolls-Royce Technical Specifications Pedjx Nhxtopfx Afhspl The system is designed to reduce NOx emissions from diesel and natural gas engines with outputs ranging from 1020 to 3300 kW. NOx reduction rates, depending on engine make and model, range between 90–98%. The exhaust gas cleaning unit is also suitable for an MTU 3.3 MW engine (mtu 20V4000 DS4000), as a lower NOx reduction rate was required in that specific project. Suitability of the containerized system for a particular engine always depends on the combined factors of exhaust mass flow, exhaust gas temperature, and the required NOx reduction rate. These systems were originally branded, designed, and sold by MTU Rolls-Royce and were manufactured according to their specifications by H+H Engineering & Service GmbH. H+H Engineering & Service GmbH has provided the seller with the option to commission the units and/or to supply a one-year warranty. In addition, our partners can also commission and service the systems. Available options can be further discussed in consultation with the seller. We purchased the units from a hyperscale data center developer, who used them to commission its backup diesel generators. The systems have been used.

Condition: used, Year of construction: 1994, functionality: fully functional, Equipment: type plate available, For Sale: Complete CHP Plant We offer a complete Combined Heat and Power installation, consisting of: - Two Siemens SGT600 gas turbines (GT5 and GT6) - One steam turbine (ST6) - Generators, HRSG/boilers and auxiliary systems Capacity: - Total electrical output: 55–60 MW - Steam production: 110 t/h Condition and history: - GT5: recently fully overhauled and operational - GT6: high operating hours, suitable as backup or for life extension after overhaul Ppedex Aghkepfx Afhel Application: Suitable for industrial steam and power production, with potential to supply surplus electricity to the grid.

Condition: reconditioned (used), Year of construction: 1995, RECONDITIONED natural gas turbine SIEMENS model SGT-600 Construction year - 1995. Reconditioned in 2022. Please contact us for more details. Thank you! Ppodpjx Ncqwjfx Afhel

Condition: refurbished (used), Year of construction: 1995, Combined power / steam plant ( 2 x SGT-600 PLUS steam turbine) Main data below.... 1. Combined power/steam plant consist of - 2 units of SGT-600 PLUS 1x steam turbine 2. Frequency - 50 Hz 3. Total power - 50-55 MW Ppsdpfx Afex A U R Tjhel 4. Construction year - 1994. 5. Still installed. Out of production. 6. Location - Europe. IMPORTANT - one natural gas turbine SGT-600 is FULLY REFURBISHED. Please see Refurbishing Report in attach.

Condition: excellent (used), Year of construction: 2010, operating hours: 500 h, Natural gas turbine GE ( General Electric ) Pjdsxni Anjpfx Afhopl Model - Frame 9E YOM - 2010 Frequency - 50 Hz Power - 127 MW This power plant is in excellent condition because it was used only like SUPPORT unit. So, it's coming with only approx. 500 working hours. NOTE - Also, it's important to mention, it's designed in way that with not so big investment you can increase the power up to 180 MW. Please contact us for more details. Thank you!

Condition: like new (used), Year of construction: 2016, General Electric ( GE) power plant with TOTAL power - 1.500 MW NEVER USED! Ppjdpfx Afjx N A Rdohjl NOTE - frequency is 50 Hz 2x 750MW Gas Based CCPP ( 4x gas turbines PLUS 2x steam turbines ) Please contact us for more details. Thank you!