Switchgear & control

Siemens SGT 600

Condition: reconditioned (used), Year of construction: 1995, RECONDITIONED natural gas turbine SIEMENS model SGT-600 Construction year - 1995. Nsdpfx Aox Ncqwsdwecl Reconditioned in 2022. Please contact us for more details. Thank you!

Condition: excellent (used), Year of construction: 2014, operating hours: 31,347 h, functionality: fully functional, power: 800 kW (1,087.70 HP), Equipment: documentation/manual, MWM CHP plant for decentralized electricity and heat generation in electrically controlled, grid-connected operation Nodpfx Ajxfgxbodwscl Controllability 50-100% Technical specifications: Electrical output in kW (electrical): 800 Efficiency: Electrical: 42.3% Thermal: 45.5% Total: 87.3% Emission values: NOx 500 mg/Nm³

Condition: used, Year of construction: 1994, functionality: fully functional, Equipment: type plate available, For Sale: Complete CHP Plant We offer a complete Combined Heat and Power installation, consisting of: - Two Siemens SGT600 gas turbines (GT5 and GT6) - One steam turbine (ST6) - Generators, HRSG/boilers and auxiliary systems Capacity: - Total electrical output: 55–60 MW - Steam production: 110 t/h Condition and history: - GT5: recently fully overhauled and operational - GT6: high operating hours, suitable as backup or for life extension after overhaul Application: Nsdox Aghkspfx Adwjcl Suitable for industrial steam and power production, with potential to supply surplus electricity to the grid.

Condition: used, Year of construction: 1994, Technical details: production capacity: 2x 4,8 MW number of Generators: 2 Stück fuel tank capacity: 480 m³ type of fuel: Gas + Öl Complete Power Plant 2 combustion engines 12 cyl V -Motor Make Maschinenwerke Halberstadt Type: 12 VDG for oil and gas 2 Generators Make Leo Somer with: - electrical capacity 4,6 MW each - mechanical capacity 4,8 MW each - thermal capacity 4,8 MW each - 2 recovery boiler - Stromeinspeisung: Mittelspannung 10 KV (direkt ins Netz) furthermore: heat exchanger, catalyst, control room, medium high voltage system, oil preparation plant, Ncjdpfx Aeu Nxatjdwel intermediate storage tank + fuel depot tanks 4,8 m³ *

Condition: used, Year of construction: 2008, For sale, we offer an MTU combined heat and power (CHP) plant with 1.2 MW electrical output. Technical details: Manufacturer: MTU Engine: MTU 12V4000L62 Generator: Stamford Year of manufacture: 2008 (completely overhauled in 2015) Ncedjxcwlaspfx Adwel Operating hours: 63,000 Including control cabinets Including dry cooler

Condition: ready for operation (used), Year of construction: 2018, operating hours: 60,000 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, power: 3,028 kW (4,116.93 HP), empty load weight: 10,000 kg, fuel: domestic gas H, control cabinet height: 2,000 mm, control cabinet length: 600 mm, control cabinet width: 800 mm, nominal power: 2,679 kW (3,642.42 HP), rotational speed (min.): 1,500 rpm, type of cooling: water, GE Jenbacher JMS 616 GS-N.L Gas CHP Unit Fuel Type: Natural Gas Electrical Output: 3,065 kW Nedpfswptfrsx Adwecl Thermal Output: 2,420 kW Total Efficiency: 85.6% Electrical Efficiency: 42.9% Thermal Efficiency: 42.7% Voltage: 690 V Frequency: 50 Hz RPM: 1,500 Engine Configuration: V16 (60° angle) Bore x Stroke: 190 mm × 220 mm Displacement: 99.8 L Fuel Consumption: Approx. 597 Nm³/h (at LHV 9.5 kWh/Nm³) Noise Level: 101 dB(A) at 1 metre Dry Engine Weight: approx. 10,000 kg Dimensions (L×W×H): 8,300 × 2,200 × 2,800 mm ⚙️ Included Equipment Turbocharged engine with intercooler STAMFORD LVSI 804 W alternator (rated 3,555 kVA) LEANOX control system Electronic ignition system Full lubrication system (pump +filters) Heat exchangers for coolant and oil Control panel with visual interface Pre-heating system Gas train according to DIN-DVGW standards

Condition: used, Year of construction: 2004, Cast epoxy resin - dry - 3 phase distribution transformer, manufacturer TESAR Italy, year of manufacture 2004, power 2500kVA, voltage ratio 20(2x±2.5%)/0.4kV, AN-AF (forced ventilation, permanent overload 30%), Dyn11, uk=6%, IP00, standard losses, functional, complete documentation and rutine test report. Nedpfxowpb Etj Adwscl

Condition: like new (used), Year of construction: 2023, operating hours: 50 h, functionality: fully functional, machine/vehicle number: Exhaust gas cleaner, Type: Containerized Mobile Exhaust Gas Aftertreatment System Brand: MTU Rolls-Royce Ncsdpsx Nhxtofx Adwel Technical Specifications The system is designed to reduce NOx emissions from diesel and natural gas engines with outputs ranging from 1020 to 3300 kW. NOx reduction rates, depending on engine make and model, range between 90–98%. The exhaust gas cleaning unit is also suitable for an MTU 3.3 MW engine (mtu 20V4000 DS4000), as a lower NOx reduction rate was required in that specific project. Suitability of the containerized system for a particular engine always depends on the combined factors of exhaust mass flow, exhaust gas temperature, and the required NOx reduction rate. These systems were originally branded, designed, and sold by MTU Rolls-Royce and were manufactured according to their specifications by H+H Engineering & Service GmbH. H+H Engineering & Service GmbH has provided the seller with the option to commission the units and/or to supply a one-year warranty. In addition, our partners can also commission and service the systems. Available options can be further discussed in consultation with the seller. We purchased the units from a hyperscale data center developer, who used them to commission its backup diesel generators. The systems have been used.

Condition: good (used), Year of construction: 2018, cooling capacity: 19.7 kW (26.78 HP), type of cooling: air, overall weight: 316 kg, total width: 700 mm, total length: 1,600 mm, total height: 1,400 mm, warranty duration: 6 months, AIRCOOLED CHILLER Galletti MPE 019 C0 AB CAT2 19,7 KW Nodeufr Igspfx Adwecl Cooling capacity: 19,7 kW / 56 tons (12/7 — 35°C) Hydraulic module: 1 pcs. water pump (LOWARA CEAM70/3/A), expansion vessel Refrigerant circuit: 1 pcs. Heat exchanger: Plate Options: Hydraulic module Condenser: Copper-aluminum Type of refrigerant: R410a Compressors: 1 pcs. Copeland ZP91KCE-TFD-522 (scroll) Number of fans: 4 psc. Dimensions: 1.6х0.7х1.4 m. Weight: 316 kg. Condition: Good

Operating hours: 240 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: MSB14, Machine fully disassembled and overhauled with new and original GEA-Westfalia spare parts. During the overhaul, the bevel gear set, among other components, was replaced with new and original parts, and the frame was oven-painted. Nsdjxvrfnspfx Adwecl Hydraulic capacity: Up to 8,000/9,000 l/h Effective capacity: between 500/1,000 l/h, as measured during testing with your processed product; capacity may vary considerably depending on the percentage of solid residues present in the product to be treated. Technical specifications: - 7.5 kW electric motor – 380V/3ph – 50Hz - Drum volume: 6.9 l – sludge chamber: 3.9 l - Drum speed: 7,500 rpm The machine is sold complete with the following accessories: - Set of special wrenches for drum disassembly - New electric panel with 11 kW inverter-controlled power section and PLC-operated discharge control section, inside stainless steel housing The inverter enables smoother operation and significantly reduces power consumption and maintenance\. - New operating water unit with 20 l stainless steel tank, complete with float and stainless steel pump, to ensure consistent flushing - Flow indicator - The machine is mounted on a heavy-duty base with four M20 anti-vibration mounts in square profile steel.