Overhead crane ± 13.680 mm x 1.000 kg

Abus ELV

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: 110‑060454, overall weight: 3,500 kg, total height: 4,500 mm, total length: 18,000 mm, total width: 7,735 mm, load capacity: 6,300 kg, power: 6.1 kW (8.29 HP), main lifting speed: 4,000 mm/min, fine lifting speed: 700 mm/s, working height: 3,200 mm, DGUV certified until: 07/2027, carrying capacity per cantilever arm: 6,300 kg, crane manufacturer: ABUS, crane model: Laufkran ELV / Portalkrananlage, Equipment: documentation/manual, For sale is a complete ABUS gantry crane system acquired through an asset deal, consisting of two ABUS overhead travelling cranes, each with a lifting capacity of 6.3 t, including the portal and crane runway steel structure (double-T beam). The system was built in 2023 and was in operation, but only used minimally. According to the FEM remaining service life assessment (2025), both hoists show a consumption-free utilization rate (0.00 full-load hours). This means that almost the entire theoretical service life of approximately 20 years is still available. Current inspections according to DGUV Regulation 52/54 (05/2025) as well as an electrical test have been carried out. The system is in excellent technical condition. Dkjdpfx Adjy Avk Rjrsr Condition • Minimally used (not in continuous or series operation) • FEM remaining service life evaluation 2025: 0.00 used full-load hours • DGUV inspected (05/2025) • Electrical inspection available Complete manufacturer and inspection documentation (drawings, test reports, circuit diagrams) included.

Condition: excellent (used), functionality: fully functional, Year of construction: 1994, machine/vehicle number: SN1744271, Overheadcrane ± 11.550 mm x 5.000 kg Dkjdpfx Adov Ipvxeror

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, machine/vehicle number: KA27 - 14/796736, ABUS overhead crane, crane runway, bridge crane, indoor crane, crane Dksdpowzrtxofx Adrsr Payload / lifting capacity 1.6t – 1600kg Span 9550mm, external dimension approx. 9700mm Year of manufacture 1998 with pendant control Lifting height 6m Hoist GM816 L06 Overall height top of crane to hook approx. 710mm (320mm beam + 390mm hoist) End carriage length without buffers approx. 220cm Optionally, two running rails 2x 40m HEA240 are available. Crane is disassembled and immediately available Very good condition, inspection logbook available Pillar jib cranes and wall-mounted jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please inquire with postal code Collection preferred

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 55,771 h, laser hours: 35,157 h, laser power: 3,200 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 150 mm, positioning speed: 140 m/min, positioning accuracy: 0.02 mm, year of last overhaul: 2024, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 150 mm, Equipment: cooling unit, documentation/manual, safety light barrier, The laser is in operation, can be inspected and tested. Regularly serviced in good technical condition. Mirrors completely replaced in 2024. Dedpfx Adev Hxbbjrokr

Condition: used, Year of construction: 2008, x-travel 2000 mm y-travel 620 mm z-travel 520 mm tool taper 2500 x 600 mm control 2000 kg tool magazin: SK40 rapid traverse HEIDENHAIN table-size 30 - 8000 U/min feed 45 m/min total power requirement 45 m/min workpiece weight max. 20 kW diameter of tools max. 10500 kg tool length - max. 5400 x 3300 x 3000 mm Equipment: - Heidenhain iTNC 530 control system - Tool magazine with 30 spaces - Chip conveyor - Screen filter system with IKZ - Operating instructions Dkjdpfoulnbkox Adrsr Optional (on request): - Radio probe (Heidenhain) - Tool measurement system (Heidenhain TT 160)

Condition: like new (used), Manufacturer: Varian Type: NHS-35 Condition: The pump is in very good condition and can also be supplied with a corner valve if required. Warranty: 3 months Dkjdpfx Aehmba Aodrsr Delivery time: In stock

Condition: used, Year of construction: 2020, machine/vehicle number: 001646U en 001647U, For sale Dkjdpfsya Ag Ssx Adrsr 2x used Demag single girder overhead cranes 13,325mm x 10,000 kg. These two cranes were installed together in one hall and feature tandem control. We can optionally supply the cranes including: * Installation and inspection * Power supply rails * Radio remote control * Master/master controls Jan Reiling B.V. also delivers new cranes fully customized at very competitive prices. * overhead cranes * suspension cranes * jib cranes * KBK rail cranes * boat lifts All our new and used cranes delivered with installation come with warranty! Additionally, we maintain our own stock of approx. 15,000 Demag spare parts. For more information, please visit the website of Jan Reiling B.V. Cranes, crane, overhead crane, workshop crane, warehouse crane, hoist, industrial cranes, universal crane, lifting equipment. Overhead crane, laufkrane, bridge crane. Single girder, einträger, single girder. Chain hoist, kettenzüge, chain hoists.

Year of construction: 2005, condition: ready for operation (used), Tank capacity: 775l, max. batch weight: 100kg, heating capacity: 26kW, max. temperature: 75°C, basket dimensions X/Y/Z: 660mm/480mm/338mm, fine filtration tank 1/2: 100µm/50µm. Machine dimensions X/Y/Z: approx. 1850mm/1400mm/1800mm, weight: approx. 950kg. The machine was overhauled in 2024 and has not been used since. Including basket rotation with swivel drive, automatic water filling and oil separation with coalescence separation unit and oil collection container. Documentation available. On-site inspection is possible. Dodpfx Aowr Dxhodrekr

Year of construction: 1990, condition: used, machine/vehicle number: 9072492, nominal capacity: 100 kVA throat: 500 mm spark plug air gap: 330 - 500 mm Dkodsz H Dyjpfx Adrsr electrical connection: 400 V kW space needed: 700 x 1420 x 2000 mm weight: 750 kg

Condition: new, Technical data: Working length: 1020 mm Max. sheet thickness: 2.5 mm Max. opening width: 48 mm Bending angle: 0 - 135° Dedpfx Adjct Rzbjrjkr Width: 1350 mm Depth: 820 mm Height: 1140 mm Weight approx.: 285 kg Features: - Versatile bending machine for sheet metal workshops and repair shops - Robust construction in a modern design - Easy adjustment of the upper die using a foot pedal, leaving hands free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper die for a wide range of bending options - Optimal price-performance ratio - Quick and easy bending process using a handle - Non-slip rubber coating on the foot pedal for safe operation - Easy adjustment of the lower die to the respective sheet thickness - High upper die for producing profiles with high hems