Self-cleaning bag filter, 130,000 m³/h

AIRMACHINERY MION MVT - MC 130000

Condition: used, Year of construction: 1993, Häwa debarking milling machine H249 / 1000 Year of manufacture: 1993 Log diameter: 0.25 m - 1.2 m Log length: 1.8 m - 7 m Milling head: 30 kW Root reducer: 37 kW Consists of: Csdpfex Rv T Iox Agkjpw - Cross infeed conveyor - Debarking - Conveyor belts - Outfeed conveyor

Condition: like new (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain to finger-jointing press (foldable) - Drying paternoster (approx. 7 m, board length up to 6 m) - Cutting and zero-cutting saw - Conveyor belt for waste wood disposal - Stacking machine - Strip magazine not for sale - Package cross conveyor Codswclkyspfx Agkjpw The machine is in very good condition and has had very little use. The machine is still assembled but available immediately.

Condition: new, Technical data: Working width: 970 mm Cpedpfsg A D Ansx Agkjw Grinding width: 950 mm Working height: 3 - 160 mm 1 steel aggregate 2 combination unit with shoe The shoe is pneumatically pressed Sanding belt dimensions: 970 x 2150 mm Common motor power of 2 grinding aggregates: 11 kW The speed of the feeding belt on the converter: 16-18 m / sec. Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roll diameter: 150 mm Sanding pad width: 50 mm Sanding belt speed: 18 m / s 1 unit Compressed air consumption: 20l / min Standard equipment: Mechanical oscillation of the sanding belt without the use of compressed air. ECO GEAR SYSTEM Smooth regulation of the feeding belt on the converter 4-20m / min Automatic star / delta start Steel roller on the first aggregate, rubberized on KOMBI agragata Electronic table height display Automatic reading device for gr. material and table position setting Safety switches Automatic machine switches Main engine brake Rubber pressure rollers 2-roller table at the entrance and exit In stock! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Condition: like new (used), Year of construction: 2012, Profiling parquet machine for longitudinal side 5+5 motors Cpodpfx Agjxwnhbokew Speed up to 60 m/min Min. Working width 70 mm (65 mm without bevel) Diamond tools for T&G profile +infeed belt conveyor

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, * Wemhöner Basic 1000 Plus - Year of manufacture 2008 - Very good condition, rarely used * Type KT-MB-28/15-240 * With automatic pin system and in-line turner * 2 tables with automatic Vario-Pin system * With Teflon coating for pre-glued foil * Foil laying system for pin table (pre-glued foil) * Heating plate size: 2800 x 1500mm * Max. workpiece size: 2,540 x 1,250mm * Membrane: yes Csdpfxsxbcudo Agkspw * Cutting station * Foil carousel storage, 3.2m height with 14 suspension rods * PLC control Siemens S7 * Control unit for PLC SIEMENS TP 270 (Touchscreen) * Automatic membrane tensioning * Installed power supply: 38.5 kW * Max. chamber pressure: 6 bar * Max. press opening: 150mm * 6 cylinders with Ø 125mm * Operating voltage: 400V 50/60Hz * Chamber height: 40/60mm * Max. pressing force: 2400 kN * Hydraulic system operating pressure: 320 bar

Condition: excellent (used), functionality: fully functional, Filter for extraction of dust and sawdust. Codpfjtzld Uox Agkepw

Condition: excellent (used), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, equipped with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed unit Planer/moulder with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed, frequency-controlled, 8–80 m/min • Feed motor 18.5 kW • 1st spindle bottom 11.0 kW • 2nd spindle right 11.0 kW • 3rd spindle left 11.0 kW • 4th spindle right 11.0 kW • 5th spindle left 11.0 kW • 6th spindle top 15.0 kW • 7th spindle bottom 11.0 kW • 8th spindle top 15.0 kW • 9th spindle bottom 15.0 kW • 10th universal spindle 11.0 kW (four-sided) • Spindle speed 6,000 rpm • Spindle diameter ø 50 mm • All spindle motors equipped with NEW motor start/stop brake units • Pneumatically supported top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced spacing between feed rollers • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported side pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Connected load approx. 145 kW / approx. 400 A • Free-standing electrical cabinet Cedpfx Agjwvqkljkspw • Operating instructions, spare parts list and wiring diagram included • Machine sold without cutterheads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal/vertical spindle NEW counter bearings All spindles with HL bearings All motors newly fitted NEW electronic motor soft start/brake devices NEW hard-chromed table plates NEW hard-chromed fences Many other new parts fitted in the machine Condition: see attached photos – technically in excellent condition Infeed mechanization unrefurbished – complete – fully functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Errors and prior sale excepted.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Used BIESSE Rover A - Nesting CNC - Year of manufacture: 2016 Cpsdpfx Aoxhcndsgkow - Available from November 2025 - Additional photos and video available

Condition: used, Manufacturer: REWA Type: Solid body auger, with bearings on both sides, Cjdpork Etuefx Agkspw Other: without cover, WITHOUT motor and gearbox, with solids pusher Length: 8.00 m Ø screw: 300 mm

Year of construction: 1984, condition: excellent (used), Blade diameter: 550 mm Minimum cutting length: 500mm Minimum cutting width: 100mm Maximum cutting height: 160 mm Minimum cutting height: 40mm Cpodslrtntspfx Agkew Pneumatic clamps