Compressor and compressed air treatment

ALUP EKO250D

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 250028, power: 250 kW (339.91 HP), pressure (min.): 4 bar, pressure (max.): 13.5 bar, The pneumatic container is used to provide oil-free, dry compressed air for test equipment. TECHNICAL DETAILS Fsdpjv Rdltofx Abnsgd Maximum air flow: 42.83 m³/min Pressure range: 4 - 13.5 bar Oil-free compressed air capacity: 42 m³/min at max. 7.5 bar Drive Motor power: 250 kW System structure Compressor: EKO 250 D Refrigeration dryer: HHDp 4500 / HF 5-M/5 Activated carbon adsorber: BEKO Clearpoint L 3400 V Post-filter: HF 6-60 Oil-water separator: BEKO Öwamat 16 Electric condensate drain: BEKO 14 MACHINE DETAILS Compressor unit: 4,000 x 2,100 x 2,500 mm Overall dimensions (L x W x H): 13,000 x 2,950 x 2,900mm Total weight: 20,000 kg

Condition: good (used), This machine combines in a unique way mixer, cutter and emulsifier in a closed system. The advantages are obvious: – space-saving by compact design, Fedpfxsm Drylo Abnsgd – complete evacuation of the product in the pre-cutting bowl under vacuum with simultaneous mixing and premincing, – stable end product with reproducible quality by fully automatic process control, – the possibility for direct and indirect heating and cooling, – the possibility to produce fine emulsion and paste-like masses as well as products with fine- up to coarsegrained small pieces. In short: Time and cost saving with improved product quality. Capacity 900 l Voltage Electrical: 400V 50Hz 3N Installed Power 2x106 kW + 132 kW Main material Stainlees Steel Tank with mixer 2000 ltr

Condition: used, Technical details: Fgodpowtctmjfx Abnod welding current: 500 A weight of the machine approx.: 129 kg dimensions L x W x H: 1,1x 0,7 x 1,2 m Control: Display for welding current with 2/4-cycle switchover, pulse, infinitely variable Cooling system: Water-cooled with frost protection Shielding gas: Solenoid valve without pressure reducer 3.0 m hose package Torch head: Gas-cooled Ground clamp with ground cable 2.5 m Wire feed: 4 roller drive with wire Ø 1.0/1.2 mm *

Condition: good (used), Holac AU125 dicer, direct from meat factory. Good condition. Fjdpfx Aboqv Ezksnjgd

Condition: good (used), Heavy duty high pressure washer. Fedsh Rkilspfx Abnjgd Two motors - 90kW + 1,5kW Machine was used for few hours and then stored at the warehouse. Delivery is available.

Condition: excellent (used), Walther NOVA 2000 extraction and dust collection unit Fgodpfx Asivta Nebnjd with 2 extraction arms mobile, on castors 2 units available In very good, ready-to-use condition!!!

Year of construction: 2000, condition: ready for operation (used), There are 3x Kaeser compressors, 2x Atlas Copco compressors and 3x Kaeser refrigeration dryers available. 1) Compressor Kaeser CS 75, year of manufacture: 1992, operating pressure: 10bar, operating hours: 38265h. 2) Compressor Kaeser AS 44, year of manufacture: 1999, operating pressure: 8.5bar, operating hours: 41564h. 3) Compressor Kaeser BS 60, year of manufacture: 1983, operating pressure: 7.5bar, operating hours: 50674h. 4) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 26831h. 5) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 52447h. 6) Refrigeration dryer Kaeser TD 51, year of manufacture: 1997, refrigerant: R22. 7) Refrigeration dryer Kaeser TF 171, year of manufacture: 2000, refrigerant: R134a. 8) Refrigeration dryer Kaeser TE 76, year of manufacture: 1996, refrigerant: R22. Documentation available. On-site inspection is possible. Fgodpfsulkvdsx Abnod

Condition: used, Year of construction: 2017, Rotary stretch blow molding machine for blowing PET bottles from preforms. Preforms are poured from a container into the feed hopper via a tilting device. From there, the preforms are fed out via an ascending belt with electronically controlled speed and are transported to the blow molding machine in a uniform orientation via a chute and loading star wheel. The shape and size of the preforms are checked and defective preforms are ejected before they are fed to the heating boxes via a mechanical star wheel. In the heating boxes, the preforms are preheated with infrared lamps. They are continuously rotated to ensure symmetrical heat distribution. Fans prevent overheating on the outside. Finally, the preform temperatures are checked using an optical pyrometer. Grippers feed the preforms to the blow wheel and remove them from it. The blow molding unit works with “crocodile molds,” in which expansion along the longitudinal axis is supported by a stretching rod. The preforms are then blown into PET bottles. The stretch-blown bottles are removed from the cavities by grippers and conveyed to the ejector. Additional title: rotational molding machine Capacity: 18000 bo/h Number of cavities: 8 pcs. Number of bottles to be ejected per stop: 202 pcs. Blow pressure: 30 bar Power: 58 kW Voltage: 400 V Frequency: 50 Hz Water: 4 bar Compressed air: 360 Nm3/h at 7 bar Weight: 16700 kg Formats: 0.5 l; 1.0 l; 1.5 l PET bottles Features: Preform feed hopper with tilting device for containers, inclined belt conveyor for preforms, preform inspection, heating boxes, blow wheel; bottle ejector; visualization on screen Fgodpfxjxyktls Abnod

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system Fjdpfxsy Ulzio Abnegd -Manufacturer: Esab, PULS MIG/MAG welding machine -Type: AristoMig 500W -Max. welding power: 500 A -Features: Water-cooled -Wire feeder case: 4-roller drive Esab type AristoFeed 48-4 -Quantity: 3x Esab, PULS MIG/MAG welding machine available -Price: per piece -Dimensions: 1200/700/H1730 mm -Weight: 210 kg

Condition: used, Year of construction: 2021, New Filling Monoblock Bertolaso 30/30/4 – PET/Glass up to 6500 bph Notice: Brand NEW Bertolaso monoblock, never used. Zero working hours. Pristine condition. The perfect opportunity to purchase a new monoblock at a used price. This new Bertolaso 30/30/4 monoblock emerges as an advanced technological solution, specifically designed to optimize filling operations for syrups filling system. Manufacturer and Model: Produced by Bertolaso, a benchmark name in the industry, this monoblock stands out for its performance and build quality. The model specification, 30/30/4, combined with its production year, 2021, provides crucial information on its current relevance in the bottling solution landscape. Speed and Capacity: With a speed of 6500 BPH, this filling monoblock Bertolaso can handle both PET and glass containers, ensuring accuracy and consistency in the filling process. Rinser: The rinser is equipped with 30 grippers and offers a single treatment. Filler: With 30 valves and a high vacuum filling system, it guarantees accurate and uniform filling of containers. The mobile nozzle highlights the filling monoblock Bertolaso’s ability to adapt to various operational needs. Capper: The capper of the filling monoblock Bertolaso, with 4 heads, is versatile in handling different types of caps, both aluminum screw and press-on plastic. Its ability to handle caps of various sizes adds further flexibility to the monoblock. Additional Features: Operational safety is ensured by various integrated features. The clockwise rotation direction and the electrical data (V: 380 and Hz: 50) emphasize the attention to technical details. The filling monoblock Bertolaso comes with manuals, which are essential for operators and maintenance technicians. In conclusion, the filling monoblock Bertolaso 30/30/4 monoblock stands as a reference point for industry experts, combining efficiency, safety, and versatility. Its technical specifications speak for themselves, underscoring the importance of choosing technologically advanced solutions in the bottling arena.   TECHNICAL SPECS Product: syrups Bottles: Fgsdpfx Absvgucbsnjd 700 ml glass Alexanderflasche – Ø 70,1/72,1 x 291 H mm – drawing AZ-01.019.01-03 700 ml Flakon PET – Ø 68,5 x 272,5 H mm – drawing 1304-01-002 1000 ml Flakon PET – Ø 76 x 298,5 H mm – drawing 3041-01-006 1000 ml PET – Ø 74 x 277,4 H mm – drawing 1709-01-003 700 ml glass Wodka – Ø 74,6/57,2 x 304,5 H mm – drawing 2807-02W1C 700 ml Vodka STD – Ø 74,6/57,6 x 304,6 H mm – drawing 2597S087  Maximum bottle diameter: 100 mm Minimum bottle diameter: 52±2 mm Maximum bottle height: 360 mm Minimum bottle height: 180 mm Minimum interior neck diameter: 18,5±0,5 mm (Ø 16 mm filling valve) Closures:      a) pilferproof aluminum screw cap – Ø 28 x H 18 mm on bottle n.