Compact VFFS System

AMTEC VFFS-MWM H14-S65L

Year of construction: 2015, condition: excellent (used), Syspal Tote Bin Lifter / Tipper Tipping height 1400 Fully stainless steel Mobile on lockable castors Electrohydraulic operation Ltedpfx Aaeim Ivvenja Built-in battery power pack Complete with plug in charger Charge lasts for 1 week, depending on usage In excellent condition

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Ljdpoqt Dmyefx Aansta Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Year of construction: 2024, condition: new, machine/vehicle number: SPIN500, Co-lead Spin Dryer is a small-sized vegetable centrifuge machine that removes excess water from leafy vegetables and other fresh produce. The basket with the product is placed in the machine and once the lid is closed, the engine will start running. A magnet locks the lid during centrifuging. Suitable for dewatering leafy vegetables, fruit, and vegetable material surface after cutting. The body is made of SUS304 stainless steel, which has a delicate appearance. It is equipped with a basket for dehydration, which is more convenient to store. The machine can set the dehydration time and dehydration speed, and the operation is stable. It is suitable for all kinds of fruit and vegetable industries, and large and medium-sized industrial catering enterprises’ demand for vegetable dehydration. * Use frequency conversion centrifugal technology to complete the surface dehydration of the material; Ledpfxjiniz Dj Aanota * Use frequency conversion technology and optical sensing technology to realize the draining time and speed, and turn on and off control. * Full open design, easy to install and take out during Vegetable Processing. * Driving by frequency conversion adjusting speed three or single asynchronous motor, stable running, convenient for speed adjustment

Year of construction: 2025, condition: new, machine/vehicle number: CD1500, CD-1500 VEGETABLE FRUIT DICING MACHINE Lodpjvlwlcjfx Aansta This cutter is designed for slicing, dicing, and cutting fruits and vegetables like potatoes, carrots, and beets into strips, slices, or cubes. Interchangeable cutting tools allow you to select the shape and size of the cut pieces, ensuring uniform results. Additional tool sets are available for smaller or larger cuts if needed. Vegetables and fruits are fed manually into the hopper, and the cut pieces are discharged into a receiving bin.

Year of construction: 2014, condition: like new (used), Kronen S021 vegetable cutting machine Serial: 021-016 2014 Stainless, The vegetable cutting machine S021 is perfectly suited for cutting decorative spirals of vegetables (e.g. carrots, potatoes, pumpkins, radishes, celeriac, beetroots, zucchinis, etc.) very quickly and simply. Lodpfx Aehpqn Soaneta By means of variable tools a multitude of spiral thicknesses (e.g. 2 x 2 mm, 2 x 8 mm, 2 x 10 mm - other versions on request) can be produced with a max. product length of 250 mm."

Year of construction: 2025, condition: new, functionality: fully functional, VFFS Incline Packaging Line for Vegetables, Frozen Products, and Non-Standard Size Items. Conveyor scales designed for weighing individual pieces of irregularly shaped products. Once the operator sets the desired product quantity via the control screen, the required number of products is manually loaded onto the scale. The machine then selects the optimal weight from the 12 integrated scales and automatically transfers the weighed product onto the conveyor, which delivers the finished batch to either the packaging machine or to a container of your choice. This dispenser functions either as a fully independent standalone unit or as part of an integrated packaging system. The equipment is designed for easy disassembly, ensuring convenient and efficient cleaning with minimal downtime. Typical applications include packaging: • Larger irregularly shaped products such as frozen fish, meat, vegetables, etc. • Suitable for dispensing non-food items that do not conform to standard shapes. The system may be offered as a complete line or as individual units, with all modules capable of autonomous standalone operation. Lsdpferqfmljx Aansta

Condition: used, empty load weight: 5,100 kg, maximum load weight: 12,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 12/1998, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 1 mm, total length: 2,550 mm, total width: 1,600 mm, suspension: steel, tire size: 235/75R17.5, wheelbase: 5,400 mm, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, SAF axles, turntable, leaf suspension, ABS (anti-lock braking system), lashing eyes, container lock, U-protection, pneumatic adjustable drawbar, aluminum side wheel guards, twin tyres, storage box, removable drop sides Ltodsi Rpxwjpfx Aansa Wheelbase: 5400 mm Body: Trailer for roll-off containers in lengths 6m-6.75m SAF axles type SKRZ 11030, pneumatic low-tension hook device, 2x pockets for plug-in locking hooks, 4x pockets for plug-in container centering and skip stop. The trailer can also be used as a flatbed! Aluminum side walls 600 mm high are included with the trailer! Drive-on ramps available for an extra charge of 900.00€ net! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, Consisting of: “Ishida” Multihead weigher Type CCW-M-214W-S/50-SS Heads: 14 pieces Performance: up to 2 x 30 weighing’s/min Filling weight (max. weight): 10.000 g Accuracy: Average value 0 to +3.0 g Weighing range: 5 - 10.000 g Max. volume: 12.500 cc (per individual weighing) Minimum division: 1g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1,6 kW In good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14115 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Lodpfxjxlptue Aanjta Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14116 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 34 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 4.0 kg Filling material dimensions: Approx. 240 x 105 x 370 mm Filling weight: 4.0 kg Grouping scheme: 1 x 3 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 5kW Packaging machine: Type: Elematic 3000 LS/335 in good condition

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: Root peeler AE-800, General: The root peeler is an advanced device designed specifically for efficiently cleaning and peeling root vegetables such as potatoes, ginger, and carrots. Additionally, by using a soft brush attachment, it can also clean delicate fruits with thin skins. This machine stands out due to its high efficiency, advanced automation, and excellent peeling results. It significantly enhances production efficiency and reduces labor costs by swiftly and effectively removing skins from vegetables. The root peeler employs various peeling techniques, including steam peeling, scrubbing, and brushing. These methods ensure thorough skin removal while maintaining the quality and integrity of the produce. The machine's versatility allows for adjustments in peeling thickness and methods, accommodating different sizes and varieties of vegetables. Key Features: • Efficient Peeling: Equipped with high-speed rotating brushes and impact mechanisms, it ensures rapid and effective skin removal. • Multifunctional Use: Beyond peeling, the machine can clean, grade, and slice vegetables, catering to various processing needs. • Adaptability: It easily adapts to different vegetable sizes and varieties, with simple adjustments. • User-Friendly Operation: Featuring automated controls, the machine is straightforward to operate, understand, and manage. Ljdpfxjt Av Ige Aanjta • Labor-Saving: The use of this peeler drastically reduces the need for manual labor, boosting overall production efficiency. • Hygienic and Eco-Friendly: Constructed from food-grade 304 stainless steel, the machine meets food hygiene standards, is easy to clean, and environmentally friendly. Regular cleaning and proper handling are necessary to ensure the equipment operates smoothly and safely, minimizing the risk of accidents from improper use. Overall, this root peeler is a robust and versatile solution for the efficient processing of root vegetables and soft-skinned fruits, making it an indispensable tool in any food processing setup.

Year of construction: 2012, condition: excellent (used), functionality: fully functional, Complete Ilapak packing line consisting of Ilapak multihued weigher mod WA 10/50 & Ilapak vertical bagging machine mod VT 2000 GF S whit a pipe diameter of 185 mm. Year of construction 2012 on both of the machines. Including cleaning platform for the scale hoppers. Ltodpfsxl T Ayox Aanea