Injection Moulding Machine

Arburg Allrounder 270C 400/70

Year of construction: 2020, condition: ready for operation (used), Clamping force: 400kN, max. opening force: 130kN, max. opening stroke: 350mm, min. mold height: 200mm, max. platen distance: 550mm, tie bar distance: 270mm/270mm, max. moving mold half: 180kg, ejector stroke: 125mm, ejector force: 30kN, injection unit: Euromap 70, screw diameter: 22mm, injection pressure: 2500bar, weight: approx. 2200kg, operating hours: approx. 12400h. Documentation available. An on site inspection is possible. Fpedox E Acxopfx Adter

Year of construction: 1997, condition: excellent (used), machine/vehicle number: GO 832 833, Demag ELKE crane canopy crane track bridge crane hall crane 2x available!!! Payload / lifting capacity 1.6 to 1600 kg Track 11785 mm, external dimensions approx. 12000 mm Fpjdpsum I Aksfx Adtjr Year of manufacture 1997 with floor control Lifting height 3 m Height from top edge of crane girder to bottom edge of hook approx. 900 mm Head girder length approx. 200 cm Crane is dismantled and immediately available Matching busbars can also be supplied. Please enquire Very good condition, inspection book is available Pillar jib cranes and wall jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please enquire by postcode Pickup preferred

Condition: good (used), machine/vehicle number: 334, Year of construction: 2006, Offer 25428 Height-adjustable aluminum double-girder gantry crane - mobile Technical specifications: - Electric chain hoist by ABUS, type GM 6, year 2018, 1500 kg capacity - Electric chain hoist with two lifting speeds: 4 and 1 m/min - Operation via electric hand remote control - Electric chain hoist equipped with manual lateral travel brake - Min. / max. total height approx. 3100 / 4350 mm - Min. / max. clearance height (lower edge of gantry): 2780 / 4020 mm - Min. / max. hook height approx. 2150 / 3430 mm - Clearance between end frames approx. 4800 mm Fpedpfx Adsxwm A Dotjr - Total width approx. 5000 mm - Total depth approx. 2200 mm - 4 swivel castors - Total weight – crane plus hoist: approx. 300 kg - Power supply: 400 V

Condition: used, Optical dividing head, precision dividing head -Max. Center height: 76 mm -Max. Distance between centers: 200 mm -with collets: 3,4,5,6,7,8,9,10,16 mm Fpedpfxob A Iqbj Adtsr -Wooden box -Total weight per box: 42 kg -Number: 1x available

Condition: ready for operation (used), Year of construction: 2022, General Data Measurements width 3740 mm Measurements depth 1475 mm Measurements height 11920 mm Machine weight 3300 kg Fpsdpfxsx D Sr Dj Adtsr Control Unit Brand ARBURG Model SELOGICA ND Injection Unit Screw diameter 35 mm Shot weight 132 g (PS) Stroke volume 144 cm3 Injection pressure 2000 bar Screw speed 54 m/min Heating capacity 6.4 Clamping Unit Clamping force 600 kN Opening stroke 400 mm Max open daylight 600 mm Distance between bars 370 x 370 mm Mould height min 200 mm Mould height max - Size of mold platens 510 x 510 mm Ejector stroke 125 mm Ejector force for / back 30 kN Media Main electronic connection 23 kW Pump drive power 15 kW Oil tank 135 l This Arburg 370 S 600-290 U Injection moulding machine was manufactured in the year 2022 in Germany. It is new, never used and still in original packaging. With a clamping force of 600 kN, 290 injection unit and screw diameter of 35mm (armored, highly wear-resistant screw) it is a compact, fully hydraulic clamping system - ideal for reliable and precise reproducibility in injection moulding operations. The closing unit can be tilted from horizontal to vertical. To be considered that machine comes without position control. Application Types Injection Moulding

Condition: new, New device MASS International Angle Conveyor Belt NDS L Conveyor belt/assembly line Available at short notice Angle conveyor belt with adjustable angles Incl. paddle separator and side catch plates at the feed section Example as shown: Fjdpfer A D S Eex Adtjpr Feed section: 600 mm Upright section: 1300 mm Discharge section: 800 mm Usable width: 350 mm Outer width: 405 mm (without motor) Height-adjustable, discharge height 700 - 1000 mm Adjustable angles for feed and discharge sections Adjustable inclination PU belt, super grip Belt speed: 3 m/min Mobile on swivel lockable castors Side catch plates at the feed section Paddle separator is individually controllable and height-adjustable

Year of construction: 2016, condition: excellent (used), PIOVAN Dryer DPA20 (2016) Drying capacity: from 0.5 to 25 kg/h. Process (air) airflow for DPA20: 5 ÷ 10 m³/h. Fedpfsxyi Dcsx Adtepr Drying hopper volume for DPA20: 20 dm³ (20 litres). Temperature range: 40-150 °C. Dew point: standard down to -25 °C, with optional desiccant cartridge/tower down to -40 °C. Compressed air supply: oil-free, filtered air, pressure ~ 5-7 bar. Control features: airflow managed in 7 increments/levels, material database of ~50 materials pre-loaded.