Screw Compressor

ATLAS COPCO GA11+ FF

Condition: good (used), Year of construction: 2016, machine/vehicle number: AP I 260800, Offer 26334 Technical data: - Operating hours: 28407 h - Operating pressure: 12.75 bar - Delivery rate: 1.95 m³/min - Drive: 400 V / 11 kW - Motor speed: 3000 rpm - Integrated dryer - Space requirement: approx. W 1500 x H 1600 x D 750 mm - Weight: approx. 420 kg Rcedpfx Ae Agr Eweiroh

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM Redoy Iplfepfx Airech 8.9 CFM / 4.21 lts/s Very little use Ex Pharma Facility

Condition: new, Year of construction: 2026, MANUFACTURER: ATLASCOPCO MODEL: G11FF S/N: ITJ1036821 YEAR: 2026 POWER (kW): 11 CAPACITY (m3/min): 1.51 PRESSURE (bar): 9.75 OPERATING HOURS (DOC/TOTAL): 0 FREQUENCY INVERTER: no Rjdpfxjy Sitke Airech BUILT-IN DRYER: yes, R513a 0.5kg HEAT EXCHANGER: no COOLING (AIR/WATER): air ON RECEIVER TANK: yes, 500 L DOCUMENTATION: yes CONNECTION: 1 NEW/USED: new

Condition: used, functionality: unexamined, Compressed Air System Atlas Copco Consisting of: Rcjdpfovx Nmfsx Airsh Compressor GA18 Plus, year of manufacture 2007 Compressor GA11VSD+FF, year of manufacture 2017 Control unit ES 6 Incl. 1000 l air receiver GA11VSD+FF, year 2017, operating hours: approx. 20,000 GA18 PLUS, year 2007, operating hours: approx. 58,000 Buyer is responsible for professional dismantling. Forklift is provided.

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: R-2000iB/210F R-30iA, load capacity: 210 kg, arm reach: 2,655 mm, controller manufacturer: Fanuc, controller model: R-30iA, teach pendant manufacturer: Fanuc, Equipment: documentation/manual, IRS Robotics®: Refurbished industrial robot. Established in 2002. Reliability as standard. 100% complete and fully functional: robot arm, controller, all cabling, and teach pendant. Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: FANUC Type: R-2000iB/210F Controller: R-30iA General purpose: Heavy-duty, floor-mounted Payload: 210 kg Reach: 2655 mm Robot weight: 1240 kg Delivery time: To be agreed upon Rodpfjp T T Izex Airsch IRS Robotics® refurbishment: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, and painted in your desired RAL colour. Includes Accuracy Status Measurements (repeatability, accuracy, backlash) About: Our core business is the delivery of refurbished A-brand robots: ABB, KUKA, FANUC, and YASKAWA. Established in 2002. We ship worldwide.

Year of construction: 2016, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Rcedpfx Aoiuxv Noireh Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Lightly used Hosokawa Alpine Ventoplex C32V air classifier in very good conditions. Recirculation classifier perfect for fine classification of abrasive products separating a fine fraction from the coarser one to ensure a perfect top cut of the product or dedust it getting rid of undesired ultrafines. It is suited for high yields with low energy consumption. Our classifiers obtain the perfect end product particle design. Our air classifiers allow you to split the product into two fractions, a fine and a coarse one, when a regular sieve can´t achieve this task due to product fineness or other characteristics. This is handy when you need to dedust the product removing the undesired fine dust or ensure a certain top cut separating the oversize coarse material, allowing you to adjust your product´s particle side distribution (PSD) to the required specification. This unit is suitable to process abrasive materials, mainly for the minerals industry. Material of construction: mild steel with wear protection Non pressure shock resistant (NPSR), non ATEX Scope: Hosokawa Alpine Ventoplex C32V with 15 kW motor and frequency converter for classifier wheel, 37 kW motor and frequency converter for ventilator wheel, internal feeding screw 5,5 kW motor with frequency converter, external blower for cooling 3 kW motor

Condition: good (used), Heavy duty high pressure washer. Rcedpfx Aijh Rkilsroh Two motors - 90kW + 1,5kW Machine was used for few hours and then stored at the warehouse. Delivery is available.

Condition: ready for operation (used), Year of construction: 2014, A CNC dual spindle woodworking machining system Homag is available. Travel speed: 35m/80m/25m/min, C-axis: 360°, A-axis: +/-100°, Z stroke: 600mm. Workpiece length range: 2450mm/17400mm, max. workpiece width: 1900mm, max. workpiece thickness (incl. clamping devices): 300mm. Main spindle power: 15kW, speed: 24000rpm, tool holder: HSK-F63, saw blade diameter: 350mm. Second spindle power: 18.5kW, speed: 24000rpm, tool holder: HSK-F63. Tool positions: 18/2x10. Total system dimensions X/Y: approx. 19000mm/6300mm, control: Homag. Including underfloor milling unit Homag, 3xtool changers, pickup position, clamping platforms, vacuum clamps, workpiece lifter, laser and additional units. Documentation available. An on site inspection is possible. Rodpfx Ajytgn Tsirech

Condition: ready for operation (used), * Brand: Gebr. Pfeiffer * Type: ball mill * Length: 4000 mm * Inner diameter: 1700 mm Rcedpfx Aiszakl Nersh * Power: 110 kW e-motor * Includes: grinding balls 30–60 mm * With: rubber inner lining and protective covers * In stock: 2 units

Condition: good (used), Year of construction: 2014, functionality: fully functional, operating pressure: 10 bar, Compressor system consisting of: Screw compressor: Atlas Copco GA11VSD+ Refrigeration dryer: Atlas Copco FD70 Pressure accumulator Öwamat 4 Oil-injected screw compressor with variable speed control Rodpsvu A Hdjfx Airoch Max. operating pressure: 10.0 bar Engine power: 11 kW Volume flow: 25.5-115.2 m³/h Control hours: 61,837 h Operating hours: 21,094 h Engine starts: 267,928 Load cycles: 315,576