Screw compressor GA37FF

Atlas Copco GA37FF

Condition: good (used), Year of construction: 2010, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: API582146, total length: 2,050 mm, total width: 960 mm, total height: 1,800 mm, power: 37 kW (50.31 HP), fuel type: electric, volume flow: 435 m³/h, operating pressure: 13 bar, Equipment: type plate available, Atlas Copco GA 37 VSD FF – used premium screw compressor Variable speed screw compressor, air-cooled, oil-injected, Full-Feature model including integrated refrigerant dryer and heat recovery system Nodpfx Afexpibasqjli Used unit from year 2010, fully functional, approx. 15,000 operating hours, sold as is with no warranty, ex location Balgach / Switzerland Delivery capacity: 6000 l/min. Annual servicing performed.

Condition: used, Year of construction: 2012, grinding diameter max. 320 mm grinding length 1.500 mm centre height 160 mm Nledotqmrpspfx Afqji Control Touch Jones & Shipman between centers max. 100 kg table: Traverse Z-Axis 1.645 mm traversing speed 0,0001 - 12 m/min swivable +5 / -5 ° x-axis: Traverse X-Axis 260 mm traversing speed 0,0001 - 6 m/min grinding head: grinding wheel motor 7,5 kW cutting speed 45 m/s Grinding wheel Ø x width x bore 450 x 50 x 203,2 mm Tailstock: Swivel range -15 / +90 ° turning speed range 0 - 660 U/min Torque 27 Nm tool adaptor MK 3 total power requirement kW weight of the machine ca. 8,5 t dimensions of the machine ca. 5,5 x 2,5 x 2,0 m Cylindrical Grinding Machine JONES & SHIPMAN - Suprema Easy 1500 E - Replacement grinding wheel flange - Multi-grain diamond (for circumferential and lateral dressing, 10mm, 1 carat) - Tailstock with micro adjustment (max. adjustment range +-0.05mm) - Pneumatic quill retraction - Two-jaw bezel (range 8-75 mm)

Condition: excellent (used), ATLAS COPCO GA37FF screw compressor with air dryer, serviced Nodpfxexlppce Afqsli

Condition: excellent (used), Year of construction: 2008, overall weight: 1,195 kg, volume flow: 7.25 m³/h, operating pressure: 13 bar, input voltage: 400 V, ATLAS COPCO GA 37 VSD ff screw compressor Variable speed, (inverter) With refrigerant dryer 37 kW motor Capacity 7.25 m3/min Pressure 13 bar Nsdst Hdh Njpfx Afqoli Mileage 13200 hours The compressor is fully functional.

Condition: used, Year of construction: 2017, turning diameter 550 mm turning length 800 mm control FANUC Series 31i Model B spindle passage 76 mm Nodpow U U Idsfx Afqoli turning speed range - drive spindle 3500 U/min drive capacity - spindle motor 40/25 kW max. torque on the spindle 864 Nm Number of tools 16 St. tool adaptor BMT rapid traverse 30 m/min dimensions 2,9 x 2,1 x 2,25 m weight of the machine ca. 6,5 t Used CNC- lathe with boxway system in very good condition Only 9.100 h power on. - 3- jaw chuck Ø 315 mm - chip conveyor - some tool holders - tailstock programmable - oil dust collector -"Build In" motor

Condition: new, functionality: fully functional, machine/vehicle number: 8153336470, overall weight: 616 kg, volume flow: 399 m³/h, pressure (min.): 4 bar, pressure (max.): 13 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are a company specializing in the compressed air industry for over 20 years. Professional level of service and high quality goods offered by our company - "proven" on the market - guarantee successful cooperation with you. We offer NEW screw compressor Atlas Copco GA37VSDs FF (variable speed with built-in dryer) Machine equipped with frequency converter (inverter), manufactured based on the latest technologies, which translates into greater efficiency and performance: On average 20% lower unit energy consumption (SER) than in previous models of the GA VSD series. Ecological and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models that operate at idle speed. Regardless of energy savings, efficiency (FAD) increases by up to 12%. Efficient fan motor (compliant with the ERP 2015 directive) reduces energy consumption and noise level. Superior Motor Efficiency (iPM) up to 94.5% exceeding IE3 efficiency levels. Built to work hard for your success. The industry-leading GA Series oil-injected rotary screw compressor delivers unmatched efficiency, high productivity and low cost of ownership – even in the harshest conditions. Technical data: capacity at 4 bar: 15.69- 13.75 l/s / 0.94-7.85 m3/min capacity at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m3/min capacity at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m3/min Max pressure 10 bar (13 Bar variant on request) Voltage 400 V Motor 37 kW Noise 67 dB(A) Weight 616 kg Motor with internal permanent magnets (IPM) Compression element Direct drive Innovative fan Separator/oil filter with durable construction Electronic water drain valve that does not cause compressed air losses Controller Elektronikon Nodjwlp Hdspfx Afqjli Inlet valve VSDs module Manufacturer code: 8153336470 If you are not sure whether the device is right for you, you have not found the right compressor, CALL! We will advise you on the right choice of device. We invite you to familiarize yourself with our full offer.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 30,000 h, functionality: fully functional, power: 37 kW (50.31 HP), fuel type: electric, operating pressure: 13 bar, pressure (max.): 12.5 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco GA 37 VSD FF - used premium screw compressor Speed-controlled screw compressor, air-cooled, oil-injected, full feature incl. integrated refrigeration dryer incl. heat recovery system Used device from year of manufacture 2012, functional, approx. 30,000 operating hours, without warranty Technical data: Motor power: 37 kW Refrigeration dryer: integrated Compressed air connection: G 1/2" Dimensions in mm (LxWxH): approx. 1766x970x1800 Weight: approx. 1,130 kg Max. pressure: 12.5 bar Volume flow: at 4 bar up to 7.43 m3/min, at 7 bar up to 7.32 m3/min, Nlodpfx Aevcmwcjfqsi at 9.5 bar up to 6.40 m3/min at 12.5 bar up to 5.24 m3/min

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, spindle bore: 83 mm, turning length: 1,000 mm, turning diameter: 570 mm, turning diameter over top slide: 340 mm, quill diameter: 80 mm, quill travel distance: 200 mm, overall weight: 3,200 kg, chuck outer diameter: 250 mm, Equipment: rotational speed infinitely variable, The machine is in very good condition. Nedpfxowxw S Ie Afqoli Immediately available! Can be tested under power.

Condition: excellent (used), Year of construction: 2009, SCREW COMPRESSOR ATLAS COPCO GA37FF 37Kw DEHUMIDIFIER Screw compressor ATLAS COPCO GA37FF machine with air dryer after service Technical data: capacity: 6.42 m3/min; 37 KW engine; max pressure 7 bar; year;2009 Njdpfx Afotukfusqeli mileage;10290h!!! Compressor fully functional, ready to work, warranty we provide service.

Year of construction: 1990, condition: reconditioned (used), tangential grinding machine Nsdpfx Afeiv S Avoqeli Brand: Jakobsen Model: 1432 Year: 1990 rpm: 1400 Grinding area: 800x400mm Table size: 1000x350mm Maximum load on table: 400kg Maximum piece height: 475mm Grinding wheel size: 350x50x127mm Heidenhain ND 221B height indicator. Magnet table 800x350mm electronic Selter with magnetization regulator. Maximum distance between table and grinding wheel: 650mm MONNET brand filter of the year 2007 Includes sets of wheels (See photos).