Screw compressor GA45VSD

Atlas Copco GA45VSD

Year of construction: 2020, condition: ready for operation (used), A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range: 2-6 compressors. Oil-water separation system Beko ÖWAMAT 15, throughput range: 6m³-30m³/min, oil outlet: DN40, container volume: 115.5l, filling volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16bar, machine dimensions X/Y/Z: approx. 1100mm/550mm/800mm, weight: approx. 40kg. System operating hours: 8656h, controller hours: 42334h. Documentation available. An on-site inspection is possible. Bwjdpfx Agoxdc Uvo Hen

Condition: good (used), Year of construction: 2010, operating hours: 1,00,000 h, pressure (min.): 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigerant dryer (WorkPlace Air System™). Technical specifications Reference conditions: intake pressure 1 bar Intake temperature 20 °C Relative humidity 0 % Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar 49.4 l/s 2.96 m3/min according to ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4867 min-1 Bjdpfx Aju Rptysg Hewn Shaft power requirement at maximum operating overpressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air volume 0.23 m³/s Oil fill quantity 12.2 l Residual oil content under reference conditions

Condition: good (used), Year of construction: 2007, overall weight: 1,400 kg, volume flow: 522 m³/h, pressure (max.): 12.8 bar, Equipment: refrigerant dryer, PROD. ATLASCOPCO TYPE GA45VSDFF YEAR 2007 CAPACITY (kW) 45 45kw OUTPUT (m3/min) 8.7 Bodpfjvrg R Ujx Ag Hewn CIS (bar) 12.8 INVERTER yes BUILT-IN DRYER yes EXCHANGER no COOLED (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 1/2 NEW/USED USED

Condition: excellent (used), Year of construction: 2013, operating hours: 20,900 h, functionality: fully functional, overall weight: 4,500 kg, power: 45 kW (61.18 HP), fuel tank capacity: 2,000 l, operating pressure: 10 bar, type of cooling: air, Complete compressor room Atlas Copco GA75VSD, built in 2013, 46,100 hours - 75 kW - Max. 10 bar Dimensions: L225 x W110 x H195 cm Atlas Copco GA45+, built in 2007, 21,000 hours - 45 kW - Max. 10 bar Dimensions: L205 x W100 x H180 cm Atlas Copco FD245, built in 2013, refrigeration dryer Dimensions: W120 x D110 x H100 cm Dimensions: 2000L tank, built in 2016, height 2.85 m Incl. oil-water separator System is currently still in operation; operating hours may vary. System is fully functional and regularly maintained. Bwodpfxev Snn Ij Ag Hjn Maintenance kits and oils are included. Very good condition, see pictures. A forklift is available for loading. Pickup by appointment only in 75053 Gondelsheim. Shipping via freight forwarder is possible; please include your postal code in your inquiry.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1993, machine/vehicle number: 1590, Equipment: cabin, hydraulics, Zenith Machinenfabrik GMBH Neunkirchen/Siegerland GERMANY Bwodpfx Aoucruusg Hsn Used for production of concrete vibropressed pavement and borders. The machine is fully functional and it comes togheter with 2 mixers, bunkers for aggregates, skippers, packaging machine and 150 pallets for production. It also has included molds for different pavement models. We also have to sale a Mobil Zenith 941 II A from 1978 which also has the identification plate attached. The machine is beeing sold because it was replaced with newer techonology.

Condition: used, Year of construction: 2019, power: 30 kW (40.79 HP), volume flow: 4.95 m³/h, pressure (max.): 12.75 bar, Atlas Copco AQ30VSD FF Air Compressor Manufacturer: Atlas Copco Model: AQ30VSD FF Year of manufacture: 2019 Country of origin: Belgium Maximum pressure: 12.75 bar Power: 30 kW Free air delivery: 4.95 m³/min Air flow rate: 82.5 l/s, 174.8 cfm, 4.95 m³/min Motor power: 40 HP Bwodpfxexk U Are Ag Hon Motor speed: 8,600 rpm Weight: 702 kg Power supply: 400 V, 50 Hz, 3 phase Design: Oil-free ISO class: 8573-1 Class 0 Control system: Elektronikon Graphic Equipment: SMARTLINK Origin: Made in Belgium No liability is accepted for the accuracy, completeness, or timeliness of the information provided.

Condition: excellent (used), Year of construction: 2008, Working width: 1100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 - 13 m/min Feed motor output: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1705 x 1545 x 1905 mm 1st unit: Steel contact roller, diameter 160 mm Motor output: 15 kW, 400 V, 50 Hz 2nd unit: Combination unit with rubber-coated contact roller (Sh 65), rigid sanding shoe Motor output: 11 kW, 400 V, 50 Hz Abrasive belt cleaning via compressed air 3rd unit: Cleaning brush Multi-function display Multi-function lever (conveyor belt, workpiece thickness adjustment) Electronic belt oscillation Bjdpfx Agjychqzo Hswn Pneumatic conveyor carpet oscillation Motorized workpiece thickness adjustment with LED display in 0.1 mm increments Units with emergency braking system Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 loose rollers Automatic star/delta start Complete documentation Note for used machines: • Specifications and prior sale subject to change. • Stated prices are ex works – loaded free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machine on site. • Special agreements are only possible in written form. (We only respond to inquiries providing your address and telephone number!)

Condition: excellent (used), Year of construction: 2013, operating hours: 1,165 h, ATLAS COPCO COMPRESSOR XAS87 5,00m3 13r !!! Compressor DIESEL ATLAS COPCO XAS87 machine after service Technical data: capacity 5.00 m3/min; Bjdpfetu E Eysx Ag Hjwn working pressure 7 Bar; year of production 2013; engine; KUBOTA mileage 1165h!!! compressor fully operational,ready to work,we give warranty net price: 39800 zł gross price: 48954 zł Below is a link to the video , showing the work of the machine

Condition: new, Ostas Profile Ring Bending Machine OPK 125 Technical Specifications: • Tool holder, shaft: 120 mm • Tool: 390 mm • Working speed: 2-7.5 m/min • Motor: 15 kW • Dimensions (L-W-H): 2000 x 1700 x 1950 mm • Weight: 4850 kg • 3 rollers are driven separately by a hydraulic motor and planetary gearbox Bsdpfx Aoxrd Rnsg Hjwn • Hardened standard rolls • Hardened and ground tool holder, shaft • Mobile control panel • Horizontal and vertical working position • Hydraulic side supports • Digital displays (2 pcs.) • In accordance with CE standard

Condition: new, Year of construction: 2025, drilling capacity: 40 mm, throat depth: 1,220 mm, spindle speed (min.): 110 rpm, spindle speed (max.): 2,900 rpm, overall weight: 1,710 kg, spindle stroke: 200 mm, spindle mount: MK 4, Drilling capacity in St 60 40 mm Drilling capacity in GG 20 40 mm Thread cutting (St 60 / GG 20) M 27 / M 36 Tool holder short spindle MK 4 Projection center spindle / column min. - max. approx. 210 - 1220 mm Clamping surface machine table approx. 1200 x 510 mm T-slots in the machine table: Number x width 3 x 18 mm Distance drill spindle - table min. - max. approx. 375 - 675 mm Distance drill spindle - base plate (= option) min. - max. approx. 1075 - 1375 mm Spindle stroke approx. 200 mm Feed rates approx. (4) 0.08 - 0.1 - 0.2 - 0.3 mm / U Speed range of the main spindle: infinitely variable 110 - 2900 rpm Dimensions (height x width x depth) approx. 2500 x 1200 x 1710 mm Net weight approx. 1710 kg Drive power spindle motor 400 V, 50 Hz approx. 2.2 / 4.0 kW Bedpfxstzkmbs Ag Hown