Second-hand machinery for sale (2,359)

Condition: good (used), Year of construction: 2004, Functionality: fully functional, TECHNICAL DETAILS CNC control: FANUC 18i X-axis: 800 mm Y-axis: 700 mm Z-axis: 750 mm B-axis: indexing axis Spindle motor: 25 KW Dolnotuwhne Nrddeut Spindle speed: 8000 rpm Distance from spindle nose to table center: 150 - 900 mm Tool magazine: 60 places Max. Table speed: 20 rpm Tool changer: DIN SK50 EQUIPMENT Chip conveyor Without clamping angle

Condition: ready for operation (used), Year of construction: 2010, operating hours: 14,516 h, Functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 6,000 mm, travel distance Z-axis: 250 mm, pressure: 3,800 bar, Water cutting system has been inspected annually by the manufacturer Bystronic and has been running in 1-shift operation. TECHNICAL DETAILS Control system: Bystronic BySoft Working pressure: 3800 bar Pump: Bypump 52 kW Cutting speed: 50 m/min Number of cutting heads: 2 Working area: 6,000 x 3,000 x 250 mm Workpiece weight: max. 790 kg/m² Workpiece thickness: max. 200 mm Positioning speed X/Y: 60 m/min Simultaneous positioning speed: 84 m/min Duslet Eblpsn Nrddet Positioning accuracy: ± 0.05 mm/min Repeat accuracy: ± 0.025 mm/min Operating hours: 16,991 h Cutting hours: 14,516 h EQUIPMENT - Light barrier concept, which ensures free access from 3 sides. - Cutting carriage with 2 x 2D heads (min. distance 225 mm) - Automatic sludge removal - Automatic level control of the water level - 1000 kg abrasive storage tank

Year of construction: 2022, operating hours: 0 h, Condition: new, Functionality: fully functional, Stockpile conveyor for direct feeding via crushing / screening plant. Machine is unused and new! TECHNICAL DETAILS Doln Nrdepdqr Esdsut stockpile capacity: up to 300 t/h with angle of repose 37°. Bulk density: 1,7kg/dm³ stockpile capacity (rotation 0°): 2500 t stockpile capacity (rotation 90°): 8500 t stockpile capacity (rotation 180°): 15000 t Feed size: 0 / 200mm Conveyor belt length: 18252 mm (AA) conveyor belt width: 900 mm Discharge height: max. 8320 mm Rubber belt: 3 ply smooth including conveyor belt scraper track length: 2500mm plate width: 400mm Perkins diesel engine: 37kW own weight: approx. 8000kg FURTHER - Cable remote control for crawler - head piece hydraulically foldable - central lubrication point

Condition: good (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 511527, turning length: 400 mm, turning diameter: 200 mm, controller manufacturer: Index, controller model: C200-4, number of slots in tool magazine: 28, TECHNICAL DETAILS Turning diameter: 200 mm turning length: 400 mm Control: C 200-4 Index Main spindle: Usable bar diameter: 60 mm Spindle diameter in front bearing: 100 mm Tool turret: Number of turrets: 2 Turret (x-fold): 2 x 14 pos MACHINE DETAILS Weight machine + cabinet: 4280 + 390 kg Dujlot Dm Nqon Nrddst Operating voltage: 400 V, 50 Hz EQUIPMENT High-pressure cooling with conditioning system Various tool holders and accessories (see pictures) WITHOUT TOOL CABINET AND WITHOUT TOOL BENCH.

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 010060, operating hours: 3,902 h, load capacity: 10,000 kg, lifting height: 5,300 mm, load center: 600 mm, mast type: standard, mast height: 3,536 mm, Equipment: sideshift, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Tires: 10.00-20 Dimensions Lifting height: 5,310 mm + forks Mast height: 3,630 mm Forks: 150 x 70 2,500 mm Load capacity and equipment Load capacity: 10,000 kg with load center of gravity 600 mm Mast: Standard Equipment: Standard, sideshift, fork positioner Drive system Engine: Diesel Perkins Operating hours: 3,902 h Transmission: ZF Machine weight Machine weight: 13,500 kg EQUIPMENT Djlnsuzf Nxs Nrddjut Sideshift Fork positioner

Condition: excellent (used), Year of construction: 2022, Functionality: fully functional, travel distance X-axis: 720 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, workpiece height (max.): 520 mm, workpiece diameter (max.): 700 mm, workpiece weight (max.): 500 kg, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, TECHNICAL DETAILS Control system: Siemens 840D X-axis: max. 720 mm Y-axis: max. 600 mm Z-axis: max. 500 mm Distance spindle nose - table: 150 - 650 mm Diameter of the table clamping surface: Ø 600 mm Max. Table load: 500 kg Clamping grooves (number x width x pitch): 5 x 18 H7 x 100 mm Centering bore: Ø 50 H7 x 30 mm Max. Workpiece size: Ø 700 x 520 mm Machine accuracy (VDI / DGQ 3441) Positioning accuracy: ±0.005 mm / 300 mm Repeat accuracy: 0.005 mm Resolution of the axes: 0.001 mm Linear axis position measuring system: Heidenhain rotary encoder Position measuring system rotary axes: Heidenhain direct encoder Main spindle Type: AC motor direct drive Speed range: 20 - 15,000 rpm Torque (25% ED): max. 34 kW / 180 Nm Spindle cone: SK 40 DIN 69871 Spindle probe: Renishaw OMP 40 Tool changer Capacity: 60 tools Max. Tool diameter: 76 mm Max. Tool length: 250 mm Max. Tool weight: 7 kg Tool breakage detection/measurement: Renishaw NC4 "Split Laser" laser Axis drives X, Y, Z axes: Siemens AC motors B, C axes: AC motors Siemens Travel speed Rapid traverse X, Y, Z: max. 36 m/min B-axis speed: max. 25 rpm C-axis speed: max. 25 rpm Acceleration X, Y, Z: 6.5 m/s² Coolant system I (external) Tank capacity: 240 l Operating pressure (external): 0.9 bar Coolant system II (IKZ) Pressure: 42 bar (paper belt filter) MACHINE DETAILS Operating pressure: 6 bar Width with scraper belt chip conveyor: 3,384 mm Width without scraper belt chip conveyor: 2,407 mm Depth: 3,490 mm Max. height: 2,864 mm Control panel swivel radius: 1,380 mm Transport dimensions (L x W x H): 4,685 × 2,588 × 2,864 mm Installation dimensions (L x W x H): 4,963 x 4,665 x 3,005 mm Doln Nrdeu Tq Hqsdsut Weight: 10,500 kg Total connected load: 35 kVA EQUIPMENT - Linear roller guides in all axes - Automatic machine switch-off (M30 Power Off) - Digital axis and spindle drives - Scraper belt chip conveyor (discharge height: 800 mm) - Chip trolley - External coolant supply - Flushing and air gun - Spindle blow-out system - Full protective cladding (without cabin roof) - Data interfaces (USB 1.1 + Fast Ethernet) - Set-up elements, adjustment screws and work area lighting - Operating instructions, circuit diagram and programming software (CD-ROM) - Operating tool - Air cooling inside/outside - Automatic side doors - AOF extraction duct

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 194880707, drilling depth: 1,600 mm, feed length X-axis: 3,000 mm, feed length Y-axis: 1,600 mm, feed length Z-axis: 1,500 mm, spindle speed (max.): 4,500 rpm, drill diameter: 40 mm, swivel angle A-axis (min.): -15 °, swivel angle A-axis (max.): 30 °, swivel angle B-axis (max.): 360 °, TECHNICAL DETAILS Drilling depth in one pass (V-axis): max. 1,600 mm Table transverse movement (X-axis): 3,000 mm Drilling carriage vertical movement (Y-axis): 1,600 mm Milling axis stroke (Z-axis): 1,500 mm Tilting axis (A-axis): +30° / -15° Table rotation (B-axis): 360° Angular resolution A-axis: 0.001° Angular resolution B-axis: 0.001° Feed speed: max. 10,000 mm/min Spindle Spindle type: Deep drilling/milling spindle Dolovbdi Ton Nrddeut Tool holder: SK50 DIN 69871/A Adjustable spindle speed: 1 - 4,500 rpm Motor power of the drilling spindle: 17.08 kW Spindle torque: 324 Nm Optimum drilling diameter in solid material: 5 - 25 mm Max. Drilling diameter: 40 mm (with pilot hole or in short-chipping materials) Standard drilling tool holder: Diameter 25 - 70 mm Max. Oil pressure through the spindle: 120 bar Liquid cooling: available Rotary table Dimensions: 1,600 x 1,800 mm Table rotation (B-axis): 360° Table load (under rotation): 20,000 kg Standard T-slots: 22 mm MACHINE DETAILS Machine dimensions (L x W x H): 7,000 x 7,900 x 4,700 mm Machine weight: 47,000 kg Total power consumption: 74.98 kW

Condition: ready for operation (used), Year of construction: 2014, operating hours: 5,183 h, Functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 460 mm, controller model: OSP-P300M-R, workpiece weight (max.): 900 kg, number of slots in tool magazine: 32, Geometry was measured with a thousandth of a clock. TECHNICAL DETAILS Control unit: OSP-P300M-R X-axis: 1,050 mm Y-axis: 560 mm Z-axis: 460 mm Speed: 12,000 rpm Distance table to spindle nose: 150 - 610 mm Rapid traverse X / Y / Z: 49 / 40 / 32 m/min Table size: 1,300 x 560 mm Table load: 900 kg Tool holder: BT-40 Tool magazine: 32 tool positions Tool diameter: 90 mm Tool diameter with free secondary positions: 120 mm Tool length: 300 mm Tool weight: 8 kg MACHINE DETAILS Machine dimensions: 2,564 / 3,194 / 2,746 mm Weight: 8,300 kg Djln Nrdouhwfcjdout Cutting time: 5,182 h Spindle running time: 5,953 h Switch-on time: 23,718 h EQUIPMENT - High pressure pump, 15 bar - Chip conveyor

Year of construction: 2020, Condition: as good as new (ex-display), Functionality: fully functional, machine/vehicle number: KE-TR6536-C-A-442, Stockpile conveyor for direct feeding via crushing / screening plant. TECHNICAL DETAILS stockpile capacity: up to 300 t/h at an angle of repose of 37°. Bulk density: 1,7kg/dm³ stockpile capacity (rotation 0°): 2500 t stockpile capacity (rotation 90°): 8500 t stockpile capacity (rotation 180°): 15000 t Feed size: 0 / 200mm Conveyor belt length: 18252 mm (AA) conveyor belt width: 900 mm Discharge height: max. 8320 mm Rubber belt: 3 ply smooth including conveyor belt scraper Duolemv E Igsn Nrddet track length: 2500mm plate width: 400mm Perkins diesel engine: 37kW own weight: approx. 8000kg FURTHER - Cable remote control for crawler - head piece hydraulically foldable - central lubrication point

Year of construction: 2004, Condition: good (used), Functionality: fully functional, machine/vehicle number: 28860011684, TECHNICAL DETAILS X axis: 1000 mm Y-axis: 600 mm Z-axis: 600 mm Control: SIEMENS SINUMERIK 810 D POWERLINE rotational speed: 10.000 rpm tool places: 24 tool holder: SK 40 MACHINE DETAILS on request EQUIPMENT IKZ 15 bar, 800L tank Doln Nrepvlbnsddeut Chipping machine Flushing gun X-Y-Z AxBs measuring system

Condition: good (used), Year of construction: 2013, Functionality: fully functional, quill stroke: 200 mm, quill diameter: 125 mm, spindle speed (min.): 2 rpm, spindle speed (max.): 1,600 rpm, Price reduction - now particularly favorable! No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control system: R&D control system MTCK/EuroTurn Maximum feed force X/Z: 10.1 / 20.7 kN Quick-change holder: Multifix size D Tailstock Quill diameter: 125 mm Maximum quill stroke: 200 mm Taper sleeve: MK6 Filling quantities Central lubrication: approx. 6 l Hydraulic unit spindle and gearbox: approx. 35 l Torque and power 1st gear, 40%/100% ED: 9,287 / 6,136 Nm 2nd gear, 40%/100% ED: 3,906 / 2,580 Nm 3rd gear, 40%/100% ED: 2,516 / 1,662 Nm 4th gear, 40%/100% ED: 1,058 / 699 Nm Power 40%/100% ED: 56 / 37 kW Speeds 1st gear: 2 - 137 rpm 2nd gear: 5 - 213 rpm 3rd gear: 17 - 505 rpm 4th gear: 58 - 1,600 rpm Reduction ratio Belt: 1.992 1st gear: 13.079 2nd gear: 5.500 Djlnsu Tquze Nrddjut 3rd gear: 3.543 4th gear: 1.490

Condition: new, Year of construction: 2021, Functionality: fully functional, No minimum price - guaranteed sale at the highest bid! Use: Machine for the production and packaging of moist wipes such as hygiene wipes, cleaning wipes, disinfectant wipes. Production process: Folding and cutting of the wipes, moistening with one or more different liquids, Packaging process: Packaging the wet wipe in a 3- or 4-side sealed bag. TECHNICAL DETAILS Control: SIEMENS PLC and touch monitor Bag sizes: L(50-145) x W(50-110) mm Suitable films: laminated composite films, heat-sealable Suitable cloth material: dry nonwovens (airlaid, spunlaid) Maximum folds: 10 vertical, 4 horizontal Cloth size (unfolded): L(40-220) x W(30-240) mm Wet wipe grammage: 30-80 g/m² Roll diameter of non-woven fabric: max. 1,000 mm Roll diameter film: max. 350 mm Filling range liquid: 0-10 ml Accuracy: ± 0.5 ml Dsln Njuigpyorddsut Machine cycle rate in idle mode: 110 cycles/minute MACHINE DETAILS Power: 5 kW Voltage: 220V, single-phase Machine dimensions: 3,200 x 2,400 x 1,800 mm EQUIPMENT - Perforating tool - Dosing pump - Tear-notch tool - 2 character sets for cold and hot stamping (14 characters each) - Outfeed belt (1.2 m)

Condition: used, Functionality: fully functional, Year of construction: 2016, operating hours: 6,490 h, load capacity: 3,000 kg, lifting height: 4,900 mm, fuel type: gas, mast type: triplex, construction height: 2,350 mm, TECHNICAL DETAILS Load capacity: 3000 kg Load center of gravity: 500 Lifting height: 4900 mm Duoln Njtwpmgerddet Free lift: 1680 mm Length: 2700 mm Overall width: 1200 mm Overall height: 2350 mm Dead weight: 5170 kg Mast type: Triplex Fork length: 2400 mm Front tires type: Superelastic Front tires size: 28x9-15 non-marking Rear tires Type: Superelastic Rear tires Size: 6.50-10 non-marking

Condition: excellent (used), Year of construction: 2012, operating hours: 4,000 h, Functionality: fully functional, machine/vehicle number: 12009, Machine has processed 90 % of aluminum workpieces. A RENISHAW measuring system has been retrofitted and the tool cabinet with BT40 holders and the LISTA drawer cabinet with contents are included in the price. TECHNICAL DETAILS X-axis travel: 900 mm Y-axis travel: 650 mm Z-axis travel: 600 mm Dujljtr A Eren Nrddet Spindle speed: 8,000 rpm, infinitely variable Torque: 285 Nm Control: FANUC Series 18i-MB Table width: 650 mm Table length: 1,100 mm Table load: 900 kg Distance from table center to spindle nose: 725 mm Number of slots in the tool magazine: 32 Tool holder: 40 mm Tool length: 250 mm Tool diameter: 80 mm Rapid traverse X-axis: 24,000 mm/min Rapid traverse Y-axis: 24,000 mm/min Rapid traverse Z-axis: 20,000 mm/min MACHINE DETAILS Total weight: 7,000 kg Spindle operating hours: 4,000 h Coolant supply: 20 bar Input voltage: 400 V EQUIPMENT - Documentation/Manual - Chip conveyor

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: H-V12319, travel distance X-axis: 660 mm, travel distance Y-axis: 356 mm, travel distance Z-axis: 456 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 20, TECHNICAL DETAILS Control system: ULTIMAX 4 X travel: 660 mm Y travel: 356 mm Z travel: 456 mm Spindle speed range: 10 - 10,000 rpm Table dimensions: 762 x 356 mm Tool changer: 20-fold Delouiytxsn Nrddout Spindle holder: SK40 Rapid traverse X/Y/Z: 28 m/min MACHINE DETAILS Drive power: 11 kW Space requirement (L x W x H): 2,000 x 1,800 x 2,600 mm Weight: approx. 2,900 kg

Year of construction: 2007, operating hours: 16,500 h, Condition: good (used), Functionality: fully functional, machine/vehicle number: NH631GF0405, LPP System (Linear Pallet Pool) automation system with 12 pallets only 16,500 spindle hours TECHNICAL DETAILS travel X / Y / Z: 1050 x 900 x 980 mm B-axis: 360 Control: MSX-701 Maps 3 speed: 8000 rpm tool holder: BT 50 number of tool places: 140 number of pallets: 12 table clamping surface: 630 x 630 mm table load: 1500 kg Dujln Nomfrtwjrddet MACHINE DETAILS dimensions: 3,37 x 5,97 x 3,41 m weight: 19 t total power requirement: 64,7 kVA spindle hours: 16.500 Switch-on time: 127.000

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, machine/vehicle number: 2009-0030, bending angle: 180 °, pipe diameter: 51 mm, pipe length: 4,500 mm, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Primary application: Production of titanium tubes (2 inch). Tube properties Dimensions: 2" (50.8 × 0.71 mm) Material: Titanium Ti - P99002 (welded tube, not for hydraulic applications) Bending ratio: 1.5 x D (1.0 x D technically feasible) Tube retraction length: 4500 mm Bending properties Operation: In one plane or as rotary draw bending of tubes and profiles. Bending angle: max. 180° + springback (with overbending of 20-30° due to springback of the titanium). Axes and control Bending axis Dusln Nrou Tqplsddot CNC axis with bending angle: 0 - 180° + springback Accuracy: ±0.1° Bending speed:

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, Punching, nibbling and forming with rotation of all tools HIGHLIGHTS - Improved punching head (compared to the 500R series) - 360° rotation for all tools without tool size restrictions - Setup-friendly linear magazine - TRUMPF punching tools - ideas with a system: TRUMPF Multitool® - Pneumatic disposal flap + chute for small parts TECHNICAL DETAILS Working area: 2500 x 1250 mm Punching force: 220 kN Sheet thickness: 8 mm Workpiece weight: 200 kg Active hold-down device: 4.5 - 20 kN Control: Sinumerik 840 D Stroke sequence: 1200 1/min Marking stroke sequence: 2800 1/min Tool changer: 18 tools with 3 clamping claws Tool change time: 0.7 - 3 s Multitool: 5/10-fold Part size: 500 x 500 mm Positioning speed X / Y / simultaneous: 100 / 60 / 116 m/min Rotation axis: 360°/s through-rotation Rotation speed: 330 rpm Position deviations: ± 0.1 mm Position spread: ± 0.03 mm Acceleration X / Y: 20 / 10 m/s² Acceleration C-axis: 350 1/s² MACHINE DETAILS Space requirement: 13600 x 2,470 x 2,800 mm Weight: 17 tons Total power consumption: 29 kW Machine will be auctioned without tools Dujln Njtwbi Torddot

Condition: used, Functionality: fully functional, Year of construction: 2016, operating hours: 13,890 h, load capacity: 3,000 kg, lifting height: 4,450 mm, fuel type: diesel, mast type: standard, construction height: 3,100 mm, fuel: diesel, TECHNICAL DETAILS Load capacity: 3000kg Load center: 700 Lifting height: 4540mm Free lift: 620mm Length: 4500mm Overall width: 2150mm Overall height: 3100mm Dead weight: 7510kg Mast type: Standard Doljtwn Sbjn Nrddout Fork length: 1370mm Front tires type: Air Front tires size: 27x10-12 Rear tires Type: Air Rear tires size: 27x10-12

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, machine/vehicle number: SI 2624, TECHNICAL DETAILS Construction volume: 250 x 250 x 325 mm (height incl. construction platform) Coating travel distance: 550 mm Travel speed: 40 - 500 mm/s Coating speed: process-dependent Resistance temperature sensor: PT-100 4-wire sensor Deln Nrdetwbctedsut Electronic temperature controller: with error curve linearization, sensor break detection Max. Heating power: 950 W at 230 V Operating temperature: 35 - 200 °C, depending on the type of metal powder Oxygen content in the process chamber during operation: < 0.1 % Max. Argon consumption: 3 m³ at the start of the build process Average argon consumption during build operation: approx. 0.6 m³/h Emission sound pressure level of the machine:

Condition: good (used), Year of construction: 2003, Functionality: fully functional, Punching, nibbling and forming with rotation of all tools Automation with TRUMPF SheetMaster - large format HIGHLIGHTS - Whisper-quiet punching with TRUMPF Softpunch® - 360° rotation for all tools without tool size restrictions - Setup-friendly linear magazine - TRUMPF punching tools - ideas with a system: TRUMPF Multitool® up to 108 tools - Pneumatic disposal flap + chute for small parts Deln Nrstq E Ekjddjut TECHNICAL DETAILS Working area: 3085 x 1650 mm Punching force: 220 kN Sheet thickness: 8 mm Workpiece weight: 230 kg Punching diameter: 76.2 mm Tool changer: 18 tools with 3 clamping claws Tool change time: 1.5 - 5 s Part size: 500 x 500 mm Control: Bosch CC 220 S Positioning speed X / Y / simultaneous: 90 / 60 / 108 m/min Rotation axis: 360°/s through-rotation Stroke sequence 1 / 25 mm step width: 780 / 355 1/min Marking stroke sequence: 1700 1/min Position deviations: ± 0.1 mm Position spread: ± 0.03 mm MACHINE DETAILS Space requirement: 7900 x 6300 x 2200 mm Weight: 13 tons Connected load: 17 kVA Pneumatic connection: 7 bar X/Y/C-axis drive: maintenance-free AC motors Punching head drive: Hydraulic drive Machine will be auctioned without tools

Condition: used, Functionality: fully functional, Year of construction: 2013, operating hours: 20,410 h, load capacity: 5,000 kg, lifting height: 4,050 mm, fuel type: diesel, mast type: standard, construction height: 2,370 mm, fuel: diesel, TECHNICAL DETAILS Doln Nrjtwn Ivoddsut Length: 3050 mm width: 1450 mm Forklift height: 2370 mm Mast height: 2730 mm Lifting height: 4050 mm Fork carriage width: 1350 mm Load capacity: 5000 kg / LSP: 600 mm Mast: Standard; sideshift, Fork positioner: 400 / 1300 mm Tires: SE; front 3.00-15; SE rear 2.50-15 MACHINE DETAILS Engine: Diesel VW Weight: 7250 kg EQUIPMENT Cabin Heating

Condition: ready for operation (used), Year of construction: 2007, operating hours: 14,161 h, Functionality: fully functional, machine/vehicle number: A0110A0036, punching force: 16 t, laser power: 2,000 W, sheet thickness (max.): 4 mm, space requirement length: 6,000 mm, space requirement width: 6,900 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, TECHNICAL DETAILS Combined operation: 2,175 x 1,250 mm Laser operation: 2,500 x 1,250 mm Punching mode: 2,500 x 1,250 mm Outputs Maximum sheet thickness: 4 mm Maximum punching force: 165 kN Maximum workpiece weight: 120 kg Dslnsvgc Apj Nrddsut Laser power: 2000 W Laser speeds X-axis: 90 m/min Y-axis: 60 m/min Simultaneous: 108 m/min C-axis punching: 60 m/min C-axis thread forming: 180 m/min Punching stroke sequence: 600 1/min Stroke sequence marking: 1,300 1/min Tools Tool positions in the linear magazine: 19 (with 2 clamps) MultiTool capacity: 2 to 10-fold Number of tools in MultiTool: 19 to 190 Rotation of all tools: 360 Tool change time: 0.9 - 3.6 s Maximum punching diameter: 76.2 mm Maximum bending height (MultiBend): 25 mm Position accuracy Position deviation: ±0.1 mm Average position spread: ±0.03 mm MACHINE DETAILS Total weight: 12,500 kg Space requirement: 6,000 x 6,900 mm Connected load: 55 kVA Laser cutting time: 14,161 h Laser switch-on time: 63,575 h

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2004, operating hours: 14,911 h, load capacity: 8,000 kg, lifting height: 4,000 mm, fuel type: electric, mast type: standard, construction height: 4,000 mm, fuel: electricity, TECHNICAL DETAILS Lifting height: 4,000 mm Fork carriage width: 2,000 mm Load capacity: 8,000 kg Load center of gravity: 600 mm Fork positioner: 425 / 1 960 mm Forks: 150 x 65 x 1 400 mm Motor: Electric Mast: Standard Battery: 80 V; 1 550 Ah; 2015 MACHINE DETAILS Tires: SE 8.25-15 Dimensions: 4,000 x 2,050 x 2,860 mm Mast height: 3,150 mm Weight: 12,174 kg EQUIPMENT - Sideshift Deln Notwc Hmjrddjut - Cabin - Heater

Condition: good (used), Year of construction: 2008, Functionality: fully functional, laser power: 3,600 W, sheet thickness aluminum (max.): 10 mm, sheet thickness steel (max.): 20 mm, workpiece weight (max.): 500 kg, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 105 mm, No minimum price - guaranteed award to the highest bidder at the end of the auction Deln Nrst H Ncfeddeut TECHNICAL DETAILS Travel X / Y / Z: 2500 / 1250 / 105 mm Weight: 105 mm Workpiece weight: 500 kg Control: Siemens Sinumerik 840D Laser: 2 x TruFlow 3600 Laser power: 2 x 3600 W Wavelength: 10.6 µm Sheet thickness steel / stainless steel / aluminum: 20 / 15 / 10 mm MACHINE DETAILS Dimensions: 10.2 x 8.8 x 2.86 m Weight: 11.6 tons Mains: 400 V / 50 Hz Connected load: 143 kVA Nitrogen connection N2: 30 bar Oxygen connection O2: 16 bar