Used Ps Thermoforming for sale (17,174)

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of Hfedpfxetndpze Adwsb min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, total width: 17,500 mm, total length: 68,000 mm, total height: 19,000 mm, overall weight: 5,500 kg, Universal and highly successful blister machine in the medium to high-speed category with intermittent platen sealing. Format range: max. forming film width: 300 mm max. web indexing ET: 280 mm max. web indexing MT: 97 mm max. punching width: 284 mm max. drawing depth: 10 mm for PVC / Materials: Forming PVC/PVDC/ACLAR Included in the price are the following configurations of the machine: - Numatic valves - Forming film unwind stand - Forming film buffer - Stock monitoring for forming material - Forming foil unwind - forming station for PVC foil - Splice detection for forming film - Heat monitoring control for heating and sealing stations - Parts for heat fume extraction without exhaust unit - Forming station without plug assist - ET Index station after forming - Fill Section with rotary brush and safety flap - Electrical preparation for SimTap 2i feeding system - Fill control inspection system VisioChrom-CV - Lid foil unwind - Stock monitoring for lidding material - Print registration via elongation (stretching device) of lid material. - Splice detection for lidding material with 2 sensors for inside and outside - Sealing station Hfedpfx Asr Nv Icjdweb - Cooling station after sealing - Index after sealing - Embossing station -MT index station - Punch station - cross blister outfeed Output: max. 600 blisters Index: max.280x284 mm Forming depth: max.10 mm

Condition: new, Year of construction: 2017, operating hours: 25 h, functionality: fully functional, saw band length: 520 mm, saw band width: 580 mm, total height: 1,500 mm, total length: 5,200 mm, total width: 2,350 mm, type of input current: three-phase, overall weight: 2,500 kg, input voltage: 380 V, New machine. Hedpfxjunia He Adwsfb

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: AGH675, Technical Data: 1 Vetter PS pillar jib crane, SWL 500 kg with Vetter chain hoist Hfedpfx Adexdvgxoweb Type: PS5-3.5 Safe working load at full outreach: 500 kg / 0.5 t Height: approx. 3.8 m Underside of jib: approx. 3.5 m Outreach: approx. 3.5 m Hook height: approx. 3 m Total weight: approx. 900 kg including anchor plate 980 mm With Vetter chain hoist SWL 250 kg Slewing range: 270°, connection to 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim Additional cranes available, lifting capacity 80-5000 kg, please inquire See pictures Shipping by freight forwarder or collection by appointment only

Condition: excellent (used), functionality: fully functional, mileage: 3,94,000 km, power: 264.78 kW (360.00 HP), first registration: 01/2020, fuel type: diesel, maximum load weight: 12,800 kg, overall weight: 26,000 kg, tire size: 315/80R19.5, axle configuration: 6x4, wheelbase: 5,100 mm, next inspection (TÜV): 07/2025, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 9,500 mm, loading space width: 243 mm, loading space height: 2,570 mm, Year of construction: 2020, operation weight: 26,000 kg, Equipment: ABS, air conditioning, car registration, compressor, cooling unit, low noise, onboard computer, tail-lift, traction control, IVECO STRALIS AT260SY – Chassis WJME62RP40C414739 – Registration FZ952WP Hedpfx Ajwuydfodwofb Year: 30.01.2020 – EURO 6 – 426,000 km Configuration: 3 Axles – Third Axle Steering with Lifting Device Engine: Cursor 9, 360 HP Transmission: ZF Traxon 12-speed – 12TX 1810 TD Tyres: 315/80 R22.5 STRUCTURE Wheelbase: 6,050 mm – Active Day Cab – Stralis Evo – Payload Capacity: 12,840 kg Rear Air Suspension – Third Axle Steering with Lifting Device TRUCK EQUIPMENT: ABS (Electronic Brake System + Brake Assist System), AEBS (ABS + ASR) + BAS, Iveconnect, Connectivity Box, ESP, Hi Cruise (Predictive GPS), Adaptive Cruise Control, Centralized Locking, Air Conditioning, Independent Air Heater, Lane Departure Warning System (LDWS), Hill Holder, White Color IC 194, Heated Ad Blue Tank (50 L), 290 L Aluminum Tank, Right Side, Expansion Module BODYWORK: INSULATED VAN BODY – ISOTHERMIC – Dimensions: 9.50 x 2.43 x h 2.57 m REFRIGERATION UNIT – CARRIER SUPRA 1250, Serial No. TC927081 – Year 2019 Temperature Recorder DAUTEL TAIL LIFT – Model DS3000VA, Serial No. 731247/008 – Lifting Capacity: 3,000 kg ATP FRC – Expires 11/2025 Roadworthiness Inspection (MCTC) Expiry: 06/2025

Condition: excellent (used), functionality: fully functional, mileage: 12,00,965 km, power: 338.33 kW (460.00 HP), first registration: 07/2013, fuel type: diesel, overall weight: 26,000 kg, tire size: 315/70 R22,5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, brakes: intarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, Year of construction: 2013, Active Time cab, Cursor 10 engine, 460 hp, Euro 5 emission standard. Automatic transmission, 4800 mm wheelbase, retarder, stationary air conditioning, 315/70 R22.5 tyres with alloy rims, double fuel tank, full ADR, tarpaulin body with fold-down sides, equipped a/b, rear doors, lowered towing bell with OMAR trailer, 8.20 m, year 2005, engine overhauled with invoice available, first registration: 07.2013, payload: 14,600 kg, excellent overall condition. Hfsdpfoxyy E Rox Adweb

Condition: used, mileage: 5,18,085 km, power: 353 kW (479.95 HP), first registration: 08/2017, fuel type: diesel, axle configuration: 6x2, wheelbase: 4,800 mm, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: air conditioning, cruise control, parking heater, trailer coupling, Color White, Air leaf spring suspension, Lift axle, Intarder, Digital tachograph, Electronic brake system EBS, Brake assistant, Electronic stability program ESP, Automatic climate control, Stationary air conditioning, Independent heating/automatic pre-selection, Comfortable front seats, Pneumatic front seats, Driver's armrest, Heated driver's seat, Radio/CD, Preparation for Bluetooth mobile phone, Lane keeping warning, Multifunction leather steering wheel, Driver's lumbar support, Fog lights, Electric rear view mirrors and heated, Immobilizer, Central locking with remote control, Anti-underrun bar: Front, Sun visor, Twin tires, Spare wheel, Cool box, Hill start control, LED daytime running lights, 1x15 pin plug connection, Telematics system, Speed limiter, Emergency brake assistant, CAB PNEUMATIC SUSP, FMS DATA INTERFACE, 15P JOINT LEFT SIDE, CAB PNEUMATIC SUSP, FMS DATA INTERFACE, 15P JOINT LEFT SIDE, INDUSTRIAL VEHICLES Iveco Stralis AS260S48Y Three-way tipper body COLOR: WHITE YEAR: 2017-08 KM: 518,085 WHEELBASE: 4,800 GVW: 26,000 DISPLACEMENT: 11,120 Euro 6FUEL: DIESEL Hfodpotcvxcsfx Adwjb

Condition: good (used), Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, plate trolleys, panel transport trolleys -Manufacturer: Räder Gangl, transport trolley with 2 steerable rollers Hodjh Hgl Iopfx Adwefb -Platform: 1800/800/H490 mm -Load capacity: max. 1500 kg -Number: 4 transport trolleys available -Price per piece -Total dimensions: 1800/800/H490 mm -Weight: 95 kg/piece

Condition: new, Year of construction: 2025, functionality: fully functional, The MS+PS coolant separator by GRAFS is a device that combines the functions of both a magnetic separator and a nonwoven fabric separator. This combination allows for an exceptionally high level of coolant purification, which is crucial in machining processes. Hfjdpsvtp Ewefx Adweb The MS+PS separator is an ideal solution for machines requiring extremely clean coolant, where contaminants include both magnetic and non-magnetic particles. By integrating magnetic filtration technology with nonwoven fabric filtration, this device ensures top-quality cleaning with minimal energy consumption. OPERATION OF THE DEVICE: 1. Initial Stage (Magnetic Separator MS): Initially, coolant containing metal chips and other magnetic contaminants passes through the MS magnetic separator. This separator is equipped with a rotating magnetic drum that attracts and retains magnetic contaminants on its surface. The coolant, cleansed of metal particles, flows forward, while the contaminants are removed from the drum surface by a special scraper. 2. Main Stage (Nonwoven Fabric Separator PS): The coolant then flows through the PS nonwoven fabric separator, where it is filtered through a specialized fabric. This fabric captures fine particles, such as grinding dust or other impurities. An additional filtration layer forms on the fabric, enhancing filtration efficiency. When the level of accumulated contaminants reaches the maximum allowable level, a float switch activates the fabric movement, winding the used material onto a reel and replacing it with a new, clean section of fabric. The process operates automatically. The Separator is Ideal for: Lathes Milling Machines Grinding Machines Technical Specifications: Separator Motor Power: 0.09 kW, 900 rpm + i80 gearbox (includes connection cable) Coolant Pump Motor Power: 0.09 kW Filter Efficiency: Up to 100 L/min Coolant Pump Capacity: 60 L/min Tank Capacity: 150 L Separator Drum Diameter: 110 mm Drum Rotational Speed: 3 rpm Set Weight with Pallet: 150 kg Dimensions: 1000 mm x 900 mm x 650 mm MS Separator Material: Stainless steel with a 10 mm base and 5 mm walls Drum: Stainless steel tube with 5 neodymium magnets inside The nonwoven fabric is available in viscose, polyester, and polypropylene options, with a basis weight ranging from 18 to 110 g/m². The separator comes equipped with a robust, mobile tank with baffles, designed to ensure the longest possible coolant flow. It is made from welded, powder-coated steel. GRAFS is a leading Polish manufacturer of industrial knife grinders.

Condition: excellent (used), Year of construction: 2007, I sell the middle cut throughfeed saw HOMAG FPL620/06/15/P S/LQ. Year 2007. Working width 204 - 1304mm Working thickness 12 - 60mm Cutting width 100mm Free end width 300mm Feeding speed 10 - 40 m/min. Configuration: 1 + 1 Stk. cutting aggregates top + bottom 1 Stk. cutting aggregate flexible top/bottom 1 Stk. cutting aggregate flexible top/bottom 1 Stk. grooving aggregate with jump for softforming function Hjdpfx Adjkbx Eaewsfb Material pressure feeding band from top Throughfeed machine. Very good condition. Available immediately.

Year of construction: 2018, condition: ready for operation (used), Various machines for sole assembly, heating, activation, pressing, and cooling of soles for the shoe manufacturing industry are available. 1) Cooling tunnel Elettrotecnica 491 PS, year of manufacture: 2017, temperature range: 0°C-10°C, belt width: 400mm, machine dimensions X/Y/Z: approx. 1150mm/800mm/1600mm, weight: approx. 250kg. 2) 3x sole activation units Elettrotecnica 0133 OP, year of manufacture: 2004, activation temperature range: 50°C-120°C, working area X/Y: 300mm/400mm, machine dimensions X/Y/Z: approx. 600mm/700mm/1300mm, weight: approx. 150kg. 3) 3x sole presses Elettrotecnica 160, years of manufacture: 2013/2014, pressing force: approx. 800kg, pressing time: 30s, machine dimensions X/Y/Z: approx. 1000mm/800mm/1500mm, weight: approx. 320kg. 4) Heat-Setter Mollina & Bianci CS 90 TS, year of manufacture: 2013, temperature range: 50°C-150°C, max. belt speed: 5m/s, machine dimensions X/Y/Z: approx. 1300mm/900mm/1500mm, weight: approx. 350kg. 5) Cooling tunnel Elettrotecnica 488 PS, year of manufacture: 2014, min. temperature: 5°C, machine dimensions X/Y/Z: approx. 1100mm/800mm/1600mm, weight: approx. 250kg. 6) Heat-Setter International 5840, year of manufacture: 2015, temperature range: 60°C-180°C, machine dimensions X/Y/Z: approx. 1350mm/950mm/1550mm, weight: approx. 350kg. An on-site inspection is possible. Hfodpfxsxnp Rxs Adwob

Condition: used, mileage: 4,89,000 km, power: 338 kW (459.55 HP), first registration: 11/2017, fuel type: diesel, maximum load weight: 1,41,370 kg, overall weight: 26,000 kg, tire size: 245/70r19.5, axle configuration: 6x4, wheelbase: 5,100 mm, next inspection (TÜV): 10/2024, brakes: intarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 8,100 mm, loading space width: 2,460 mm, loading space height: 2,650 mm, Year of construction: 2017, Equipment: ABS, car registration, compressor, low noise, navigation system, onboard computer, retarder, spoiler, tail-lift, traction control, trailer coupling, IVECO STRALIS AS260S46Y\PS HI WAY EVO HR - CHASSIS WJME62RT90C373370 Hsdjpr Uplopfx Adwsfb YearEURO 6 Cursor 11 engine - 460 hp - 488,907 approx. Automatic Transmission TRAXON 12 GEAR + HYDRAULIC RETARDER Bodywork: cab color white 194 Worn or to be replaced parts: as per photos sent Tires: size: 315\70r22.5 STRUCTURE: 260 - Payload capacity: 141.37 - Wheelbase 5100 mm Rear air suspension - Steerable and liftable third axle - Active Space cab - Stralis Evo TRUCK EQUIPMENT:Engine Cursor 11 - 460 Hp - Euro 6, Transmission 12tx 2210 Td - 12 Gears With Two Reverse Gears + Hydraulic Retarder, Rear Pneumatic Suspension, Third Axle Steering Co-driven With Lifter, Automatically Adjusting Air Conditioning, Parking Conditioner, Independent Air Heating, Adaptive Cruise Control, Iveconnect With Connectivity Box, Abs (Electronic Brake System + Brake System Assist), Aebs (Abs-Asr) + Bas, Esp, Lane Detection System Ldws Norm Eu, Trailer Version, Engine Brake With Retarder Function, Immobilizer, Hydrodrive, Cabin Bed As - Evo Hr Hi Way, Pneumatic Cabin Suspension, Lower Bed High Comfort, Maxifridge + Thermal Box, Heated Urea Tank 80 Lt, Fuel Tank 710 Lt In Aluminum Right Side, Electric Window Lift, Central Locking, Integrated Fog Lights And Depth, High Comfort Pneumatic Driver's Seat, Pneumatic Passenger Seat, Electric and Heated Rearview Mirrors, Sun Visor, Sun Visor. Heated Mirrors, Sun Visor, Cab Color Plastics. EQUIPMENT: FIXED BOX BODY WITH FIXED FRENCH RIB Interior useful dimensions approx. 8.10 * 2.46 H 2.65, - Sliding side curtains - Roof equipped with opening cover \ discover HINGED TAIL LIFT Brand: PALFINGER - Serial No.: 83571076 - Useful lifting capacity 30 - Foot controls on tailboard plate, Stabilizer feet Documents: Nationalized - Certificate of approval For viewing and road test contact Valerio Roscini at 339/3170008

Condition: excellent (used), functionality: fully functional, mileage: 8,16,107 km, power: 411.88 kW (560.00 HP), first registration: 04/2016, fuel type: diesel, overall weight: 26,000 kg, tire size: 315/80 R22,5, axle configuration: 6x2, wheelbase: 4,200 mm, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2016, operation weight: 26,000 kg, Hi Way cab with air suspension, metallic blue. Cursor 13 engine, 560 hp, Euro 6 emission standard, Eurotronic gearbox, 12 speeds, ZF Intarder, navigation system, refrigerator, stationary air conditioning, wheelbase 4200 mm, year of registration: 04/2016, mileage: 816,107 km, DN Cranes 24000 crane, 5 extensions with radio remote control, fixed flatbed 5,200 mm with TR1H80 aluminum sideboards, towing bell, new superstructure. Hfjdpfx Adoxca T Tswjb

Condition: used, mileage: 1,67,000 km, fuel type: diesel, color: white, emission class: euro6, Year of construction: 2015, Equipment: ABS, air conditioning, differential lock, IVECO Stralis AD 260S36 - 6x2 – km.167,000 - Euro 6: - 1st Registration 2015; - Km 167,000 approx.; - 360 HP engine - Euro 6; - three axles 6x2, wheelbase 4200+1395; - automatic transmission; - rear air suspension; - third intelligent axle (forward/reverse steering); - total mass 260 quintals; - payload 124 quintals approx.; - digital tachograph; Accessories: - differential lock, air conditioning, electric windows, electrically adjustable mirrors, ABS, ASR, pneumatic driver's seat, cruise control, central locking. Hfsdpfx Adera Dmbjwjb Equipment: - mt. 5.60 - Palfinger PK16001-K rear hydraulic crane with hydraulic activations at the tip, radio control and rotor The vehicle is available for viewing and testing at the company: PSL AUTOCARRI SRL Via degli Imprenditori, 45 (Z.ind.) 37067 Valeggio sul Mincio (Verona) Tel. 045-7950955. Please contact us to make an appointment in order to better organize access to the company. For further information, technical clarifications and to find out the selling price of the vehicle, please contact our sales managers directly, at 045-7950955. N.B.: Please note that the description of the vehicle is to be considered indicative and may contain errors or inaccuracies. Interested parties are required to verify the exact correspondence of the characteristics of the vehicle before proceeding with the purchase. Psl Autocarri Srl declines any responsibility for any errors or inconsistencies contained in this descriptive sheet. N.B.: WE ONLY RESPOND TO REQUESTS FOR INFORMATION CONTAINING THE NAME AND TELEPHONE NUMBER OF THE APPLICANT

Year of construction: 1987, condition: like new (used), WELEX PS/PP SHEET LINE Machine Type: Extruder - Blade Line Brand: Welex Hfedpfx Adjh Dw D Hswjb Year: 1987/1988 Power (kg/hr): 350-400 Sheet thickness: 0.35 mm - 1.4 mm Sheet width: 1104 mm

Condition: excellent (used), functionality: fully functional, machine/vehicle number: WJME62RP40C404429, mileage: 3,04,285 km, first registration: 12/2018, fuel type: diesel, empty load weight: 11,781 kg, overall weight: 26,000 kg, tire size: 315/080R22,5, axle configuration: 6x2, wheelbase: 5,790 mm, fuel: diesel, energy efficiency: C, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 8,800 mm, loading space width: 2,500 mm, loading space height: 2,500 mm, Year of construction: 2018, *Financing subject to terms and approval by the finance company. *THERMO KING T-1200R refrigeration unit *4 meat rails *Rear ladder with 5 steps Hedpfx Ajxix Enedwofb

Condition: ready for operation (used), Year of construction: 2001, Four loading units Pavan for lasagna sheets in industrial production lines are available. Capacity: approx. 250 trays/h, format range: 200mm/150mm, machine dimensions X/Y/Z: approx. 1800mm/850mm/1650mm, weight: approx. 325kg. An on-site inspection is possible. Hfedsxl El Hopfx Adwjb

Condition: excellent (used), functionality: fully functional, mileage: 3,79,000 km, power: 264.78 kW (360.00 HP), first registration: 01/2020, fuel type: diesel, maximum load weight: 12,800 kg, overall weight: 26,000 kg, tire size: 315/80R19.5, axle configuration: 6x4, wheelbase: 5,100 mm, next inspection (TÜV): 07/2025, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 9,500 mm, loading space width: 243 mm, loading space height: 2,570 mm, Year of construction: 2020, operation weight: 26,000 kg, Equipment: ABS, air conditioning, car registration, compressor, cooling unit, low noise, onboard computer, tail-lift, traction control, IVECO STRALIS AT260SY – Chassis WJME62RP40C414622 – Plate FZ945WP Year 30/01/2020 – EURO 6 – 426,000 km 3-Axle Configuration – Third Steerable Axle with Lift Axle Cursor 9 Engine, 360 HP ZF Traxon 12-Speed Gearbox – 12tx 1810 Td Tyres: 315/80 R22.5 Hfsdpfx Aowuyczjdwsb BODY Wheelbase: 6050 mm – Cab: Active Day – Stralis Evo – Payload: 12,840 kg Rear Air Suspension – Steerable Third Axle with Lift Axle TRUCK EQUIPMENT: ABS (Electronic Brake System + Brake Assist System), AEBS (ABS + ASR) + BAS, Iveconnect, Connectivity Box, ESP, Hi Cruise (predictive GPS cruise control), Adaptive Cruise Control, Central Locking, Air Conditioning, Independent Air Heater, Lane Departure Warning System (LDWS), Hill Holder, Color: White IC 194, Heated 50 l AdBlue Tank, 290 l Aluminium Right-Side Tank, Expansion Module THE BODYWORK: Isothermal Van Body – Dimensions: 9.50 x 2.43 x h 2.57 m Refrigeration Unit – Carrier Supra 1250, Serial no. TC927081 – Year 2019 Temperature Recorder Tail Lift Dautel – Type DS3000VA – Serial no. 731247/008 – Lifting Capacity 3,000 kg ATP FRC – valid until 11/2025 MOT (MCTC) valid until 06/2025

Condition: good (used), functionality: fully functional, machine/vehicle number: WJME2NNJ60C356865, mileage: 4,72,503 km, first registration: 02/2017, tire size: 315/80R22,5, axle configuration: 6x2, wheelbase: 3,800 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2017, *FINANCING SUBJECT TO CONDITIONS AND APPROVAL BY THE FINANCIAL PROVIDER. Hedpfxsw Sxite Adwsfb *ROS ROCA OLYMPUS 21W GARBAGE COLLECTION EQUIPMENT

Condition: excellent (used), functionality: fully functional, mileage: 3,79,000 km, power: 264.78 kW (360.00 HP), first registration: 01/2020, fuel type: diesel, overall weight: 26,000 kg, tire size: 315/80R19.5, axle configuration: 6x4, wheelbase: 5,100 mm, next inspection (TÜV): 09/2025, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 9,500 mm, loading space width: 243 mm, loading space height: 2,570 mm, Year of construction: 2020, Equipment: ABS, air conditioning, car registration, compressor, cooling unit, low noise, onboard computer, tail-lift, traction control, IVECO STRALIS AT260SY – Chassis WJME62RPX0C414740 – LICENSE PLATE FZ947WP Year 01/30/2020 - EURO 6 - KM 379,000 Configuration 3 Axles - Third Steering Axle With Lift Engine Cursor 9 360 HP Gearbox Zf Traxon 12 Speed – 12tx 1810 Td Tires: 315/80 R22.5 STRUCTURE WHEELBASE6050 mm - Active Day Cab – Stralis Evo – P. Utile 128.40 Q.li Pneumatic Rear Suspension - Third Steering Axle With Lift TRUCK EQUIPMENT: Abs (Electronic Brake System + Brake Assist System), Aebs (Abs + Asr) + Bas, Iveconnect, Connectivity Hodpfx Aswhixfsdwefb Box, Esp, Hi Cruise (Predictive GPS), Adaptive Cruise Control, Central Locking, Climate Control, Independent Air Heating, Ldws Lane Detector, Hill Holder, White Color Ic 194, 50 Lt Heated Blue Ad Tank, 290 Lt Aluminum Tank Right Side, Expansion Module EQUIPMENT: ISOTHERMAL VAN – ISOTHERMIC - Dim. 9.50 * 2.43* h 2.57 REFRIGERATOR UNIT – CARRIER SUPRA 1250 Matr. TC927081 – YEAR 2019 THERMORECORDER DAUTEL TAILGATE – TYPE DS3000VA- Matr. 731247/008 – Lifting P. 30 Q.li ATP FRC – exp. 11/2025 REV. MCTC EXP. 06/2025

Condition: good (used), I SELL FEIN PS 50 MAGNETIC DRILL. IN VERY GOOD CONDITION. Hedsulc Tuspfx Adwjfb

Condition: reconditioned (used), Max. forming area: 960 x 660 mm Min. forming area: 210 x 170 mm Max. sheet size: 1000 x 700 mm Min. sheet size: 310 x 210 mm Max. sheet thickness (manual feeding): 12 mm Max. sheet thickness (automatic feeding): 10 mm Max. tool height: 490 mm Max. draw depth: 300 mm (positive/negative) Total power consumption: approx. 64.0 kW / 115 A Technical features: - Siemens Simatic S7-300 control, OP 37 panel - Air-conditioned control cabinet - Top heater with 5 temperature control circuits via pilot emitters - Bottom heater with 5 temperature control circuits via pilot emitters - Individually switchable top heating elements - Individually switchable bottom heating elements - Parallel clamping frame - Pneumatic motor locking for the upper reduction frame - Cylinder locking for the lower reduction frame - 4 cooling fans - Adjustable vacuum for the lower table via cascade control - Pre-blow and demolding adjustable via cascade control - Large front opening for tool change - Film sag control by photocell with support air - Automatic tool change system Hodpfxewf Dvae Adwefb Lower table: 1. Tool clamping via vacuum 2. Tool change via pneumatically operated ball rollers Upper punch: 1. Motorized remote adjustment for stroke limitation 2. Pneumatic quick-change system for tools Sheet feeding: - Automatic motorized lifting of the film transport chain - With pneumatic quick-clamping system for vacuum plates - Motorized centering of plastic sheets - Separate vacuum pump for grained material Optional preheating retrofit: - Pneumatically moved top heater, complete zone control, each emitter individually switchable via toggle switch - Pneumatically moved bottom heater, complete zone control, each emitter individually switchable via toggle switch - Temperature control of top and bottom heating via separate heating controllers in the BE control cabinet (temperature setting not via UA control panel) Optional retrofit for roll processing: - Cross cutter and feeding rollers in feed area - RO 800 roll stand

Condition: excellent (used), This conveyor belt machine is ideal for shearing the edges of small carpet samples. Diagram of K-50 The key component of the KS 50 edge beveling machine is our SE 50 cutting unit. The machine is designed with angle adjustment from 0° to 60°. The depth of cut is adjustable from 2 mm to 22 mm. The guide plate for carpet samples can be easily adjusted steplessly from 20 mm to 210 mm. Quick and easy adjustments can be made by releasing the locking lever. The conveyor belt is driven by a three-phase motor. The speed of the cutting motor and the conveyor belt is infinitely adjustable by means of frequency converters. Larger pieces of carpets are guided manually as they pass through. The cutting width is 50 mm. Hfodpfx Aeud Dqkodwob

Condition: reconditioned (used), Plate size: 1000 x 1500 mm Forming area: 960 x 1460 mm Drawing depth: 600 mm Hfedpfx Adowf D R Rswsb If you would like further details or a quote, please contact us.

Condition: reconditioned (used), functionality: fully functional, Plate size: 2000 x 1000 mm Hfjdswf Ebwopfx Adweb Forming area: 1960 x 960 mm Drawing depth: 600 mm If you would like further details or a quote, please contact us.