Used Plainer Thicknesser for sale (152)

Condition: excellent (used), Catalogue number: 7775 TECHNICAL DATA - Cutterblock width: 640 mm Iaedpfxoycihbj Abcep - Number of knives: 4 pcs - Maximum working thickness: 300 mm – From above: - Anti-kickback fingers - Toothed, pulling, swiveling infeed roller - Pressure bar - Planing cutterblock - Pressure bar - 2 smooth, pulling, rubber-coated outfeed rollers - Digital thickness display - Main motor: 5.5 kW - Electric table lift: 0.7 kW - Variable feed speed: 6–20 m/min - Feed motor: 1.1 kW - Dust extraction port diameter: 150 mm - Dimensions (L/W/H): 1000 x 1400 x 1200 mm - Weight: 950 kg ADVANTAGES – Italian manufacture – Electric thickness display – Electric table lifting – Used thickness planer in very good condition, complete with original technical documentation (DTR), CE marking Net price: 31,900 PLN Net price: 7,590 EUR based on 4.2 PLN/EUR (Prices may vary with exchange rates)

Condition: excellent (used), CATALOG NUMBER 7573 Technical data: - Shaft width: 640 mm - Number of knives: 4 pcs - Max thickness of machined element: 270 mm - Top section: - Safety pawls - Toothed infeed shaft, driven - Hold-downs - Planing shaft - Hold-downs - Outfeed smooth shaft, driven - Bottom section: - Adjustable rollers in lower table: 2 pcs - Main motor: 7.5 kW - Electric table lifting – lifting motor: 0.75 kW - 2 feed speeds – feed motor: 1.1 kW - Suction outlet diameter: 160 mm - Dimensions (L/W/H): 1150x1240x1170 mm - Weight: 1073 kg Iedpfeyarbfox Abcoap ADVANTAGES: – Polish manufacture – Electric table height adjustment – Operating documentation (DTR) – Used thickness planer, in very good condition Net price: 26,900 PLN Net price: 6,400 EUR (depending on 4.2 EUR rate) (Prices may vary with higher fluctuations)

Condition: used, functionality: fully functional, CASADEI FS51 combination planer and thicknesser with spiral cutterhead - after technical inspection, ready for operation Specification: • Condition - used, after a comprehensive technical check • Manufacturer - CASADEI • Model - FS-51 • Working width - 500 mm • Thicknessing height - 240 mm • Table length - 220 cm • Noise reduction combs at the cutterhead • Motor power - 4.0 kW • 4-knife cutterhead with spiral shaft • Feed roller in the lower table Iodpfxeytpk Ds Abcsap • 2 feed speeds • Original paintwork • Weight approx. 750 kg • Overall dimensions 220 x 90 x 100 cm (L x W x H) Additional information: • The machine is in good technical condition and ready for immediate use • The photos shown represent the actual item for sale • The machine can be powered up and tested on-site • The listed auction price does not include VAT or transport costs Financing and shipping: • We arrange transport via our own MDD fleet, courier companies, or external carriers • We offer financial support in the form of leasing or leasing loans

Condition: new, functionality: fully functional, input voltage: 400 V, planing width: 310 mm, number of blades: 30, rotational speed (max.): 4,000 rpm, total length of planing tables: 1,300 mm, overall weight: 180 kg, Equipment: CE marking, Application of a helical cutterhead with replaceable carbide knife inserts, which reduces noise levels by approximately 50% and extends sharpness more than 20 times compared to a conventional straight knife cutterhead. The advantage of carbide inserts is that, in case of damage, individual knives can be replaced or rotated, which significantly reduces operating costs. The carbide-tipped blades provide tear-free planing and optimal smoothness with every type of wood. Quick and hassle-free folding tables allow fast conversion to thicknessing mode. Integrated, tiltable chip extraction device - connection diameter 100 mm. Both tables are equipped with precision adjustment systems and noise-reducing covers. The planer table is centrally mounted on the guide column with a support bracket. Stable fence with prismatic guide, tiltable from 90° to 45°. Tables are made of cast iron with polished work surfaces. Cutterhead guard included. Technical Specification Voltage: 400 V Dimensions (W x D x H): 1300 x 900 x 1180 mm Weight approx.: 180 kg Planer Planing width: 310 mm Cutterhead speed: 4000 rpm Working height: 990 mm Number of knives/inserts: 30 pieces Cutterhead diameter: 75 mm Planing fence: 1110 x 130 mm Fence tilting range: 90° - 45° Max. chip removal in planer: 5 mm Planer table length: 1300 mm Thicknesser Thicknesser table length: 600 mm Thicknesser planing width: 305 mm Iaodjyt I H Dopfx Abcsp Minimum workpiece height: 5 mm Maximum workpiece height: 180 mm Max. chip removal in thicknesser: 2.5 mm Feed speed: 8 m/min Dust extraction port diameter: 100 mm Motor power: 3 kW Motor power S1 100%: 2.2 kW

Condition: new, Year of construction: 2025, Working width: 410 mm Planer block: Tersa knives Number of knives: 3 Planer table length: 1800 mm Planer stop angle adjustable: yes, 45° to 90° Maximum thickness throughput of thicknesser: 230 mm Thicknesser table height adjustment: handwheel Planer thickness display: mechanical counter Feed speed: 6 m/min Infeed roller: steel Outfeed roller: steel Table rollers: no Motor power: 4.4 kW Motor brake: yes, automatic Extraction connection: 100 mm Iaedpjgzlnuofx Abcsp Machine length: 2000 mm Machine width: 750 mm Weight: 325 kg

Condition: new, Year of construction: 2025, Working width: 408 mm Planer block: Strip knife Number of knives: 3 Planing table length: 1640 mm Planing stop angle adjustable: yes Folding up the planing tables: manual Maximum thickness throughput of the thicknesser: 225 mm Thicknessing table height adjustment: handwheel Planing thickness display: scale Feed speed: 7 m/min Infeed roller: steel Outfeed roller: rubber Pressure beam: continuous Iaodpjwfcqcjfx Abcep Table rollers: no Motor power: 3 kW Motor brake: yes, automatic Extraction connection: 100 mm Machine length: 1660 mm Machine width: 870 mm Weight: 260 g

Condition: excellent (used), CATALOG NUMBER 7186 TECHNICAL DATA - Max. planing width: 510 mm - Max. planing height, double-sided: 170 mm - Max. planing height, four-sided: 100 mm *Top section: - Infeed roller, toothed - Kickback fingers - Feed roller, toothed - Pressure bar - Planing shaft 510 mm, 4-knife (equipped with 2 knives) 4 kW - Outfeed roller, smooth *Bottom section: - Guide rail - Sliding roller – adjustable table with up/down roller - Planing shaft 510 mm, 2-knife 4 kW - 2 smooth, sliding, adjustable rollers *Rear section: - 2 side spindles + pressure unit - 1) right vertical 100 mm 2.35 kW - 2) left vertical 100 mm 2.35 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Manual thickness adjustment - 4 feed speed options - Feed motor 1.5 kW - Overall dimensions (L/W/H): 1940 x 1320 x 1140 mm - Weight: 1330 kg ADVANTAGES – Ideal for processing beams, flooring, etc. – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change) Iodpfxex Sx S Ns Abcoap

Condition: excellent (used), CATALOG NUMBER 7134 TECHNICAL DATA - Max. planing width: 500 mm - Max. planing height: 190 mm Top section: - Anti-kickback fingers - Pulling feed roller, sequential - 2 rows of pressure rollers - Pull-in feed roller, sequential - 500 mm planing cutterhead, 4-knife, 7.5 kW motor - Pressure rollers - Smooth, pulling outfeed roller - Outfeed pressure roller Bottom section: - Adjustable infeed table + pressure roller - Smooth sliding roller - 500 mm planing cutterhead, 4-knife, 5.5 kW motor - 2 smooth sliding rollers - Side pressure roller Rear section: - Side spindles: 1) Right vertical 140 mm, 4 kW 2) Left vertical 140 mm, 4 kW Iodpfx Aboymfazscoap - Spindle diameter: 40 mm - Spindles adjustable up/down, right/left - Stepless feed speed adjustment: 8–30 m/min - Electric table lifting - Extraction port diameters: 2x145 mm, 2x160 mm - Dimensions (L/W/H): 2050 x 1700 x 1700 mm - Weight: 2100 kg FEATURES – Ideal for flooring production – Electric table lifting – Czech manufacture – Used planer, in very good condition Net price: 37,900 PLN Net price: 9,020 EUR (based on EUR rate 4.2) (Prices may change with significant fluctuations)

Condition: new, - Motorised thickness table adjustment with two speeds - Digital display for working height - Thickness table made of grey cast iron - Thickness table mounted on four large trapezoidal-thread spindles for maximum stability and precision - Four feed speeds - Optional with two rollers in the thickness table - Standard with noise protection and chip guard curtain at infeed and outfeed - Adjustable roller pressure - Front feed roller with helical toothing - Outfeed roller with rubber coating - Powerful industrial motor This item comes with a 3-year Stürmer warranty upon online registration. Warranty only applicable for end customers in Germany and Austria. Manufacturer SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Dimensions and weights: - Length (product) approx.: 1305 mm - Width/depth (product) approx.: 1080 mm - Weight (net) approx.: 750 kg Extraction connection: - Extraction nozzle diameter (thickness): 150 mm Ijdpeu T Hq Esfx Abceap Installation information: - Required space length: 1305 mm - Required space width/depth: 1080 mm - Required space height: 1197 mm - Note on required space: The dimensions take into account maximum travel distances or usable lengths. - Machine body length: 1305 mm - Machine body width/depth: 725 mm - Working area length: 1000 mm - Working area width/depth: 2000 mm - Note on working area: Please add the given dimensions to the required space to determine the recommended free installation area for the machine. Thickness: - Thickness table length: 630 mm - Thickness table width: 1000 mm - Working height thickness min.: 3.5 mm - Working height thickness max.: 300 mm - Working length thickness min.: 210 mm - Max. stock removal thickness: 8 mm Electrical data: - Main motor power: 9 kW - Supply voltage: 400 V - Network frequency: 50 Hz Planer cutterblock: - Cutterblock type: TERSA - Cutterblock diameter: 120 mm - Number of knives: 4 pcs - Cutterblock speed: 4500 rpm - Planing width max.: 630 mm Feed: - Feed speed: 5/8/12/18 m/min

Condition: excellent (used), working width 430mm Iajdpfew Ad N Iex Abcep 4-knives shaft fence with angle regulation tables length 2080mm delta/star start manual regulation of thicknesser table two feeding speed horizontal drill

Condition: excellent (used), Planer-thicknesser KNAPP AD 410 Profi T - used - WIGO cutter block, ground cast iron tables, joint opening tables opening simultaneously, table opening to the rear, infinite feed speed adjustment ----- Technical data ----- Planing width: 410 mm, table length: 1,700 mm, number of knives: 3, tilting range of fence: 45°, clearance height: 230 mm, feed speed: 6-12 m/min, extraction port: 120 mm, motor power: 4 kW, weight: 460 kg Quality info: - Joint tables adjusted - Infeed and outfeed rollers checked and adjusted - Table guides checked/adjusted - Complete basic inspection Iaedpfoymn Eysx Abcep - Complete cleaning - Electrical system checked - Immediately ready for use

Condition: ready for operation (used), Thicknesser SAC RS53 4 knives Specification: • working width - 530 mm • working height - 240 mm • 5.0 kW engine • 4-knife shaft for traditional knives • analog thickness indicator Isdpfx Aowgdghobcjap • 2 feed speeds • full, straight pulling shaft in front of the planing shaft • two steel outgoing rollers behind the planing shaft • sliding roller in the lower table • manual up/down adjustment • table supported by 1 solid piston • original painting • sawdust extraction outlet fi 140 mm • weight approx. 800 kg • dimensions 92 x 100 x 160 cm (length x width x height) Additional information: • the photos show the actual condition of the item for sale • the device can be switched on and checked on site.

Condition: good (used), functionality: fully functional, planing width: 530 mm, total width: 1,000 mm, total height: 1,050 mm, overall weight: 600 kg, total length: 2,740 mm, working width: 530 mm, chip removal: 150 mm, planer shaft diameter: 120 mm, table length: 2,740 mm, Planer, thicknesser STETON PF 530 E Specification: • Condition - used • Manufacturer - STETON • Model - PF 530 E • Working width - 530 mm • Table length - 2740 mm • Adjustable fence (angle adjustable) Isdpfx Aboxtdxbocsap • Motor power - 4.0 kW • Spindle speed - 5000 rpm • Chip thickness indicator • Max cutting depth - 8 mm • Electrically adjustable planing height from control panel • Noise reduction fingers at the shaft • Motor brake • 4-knife shaft, diameter 120 mm, for Tersa knife system • Start - star-delta • Outlet for chip extraction - diameter 150 mm • Weight - approx. 600 kg • Overall dimensions - 274 x 100 x 105 cm (L x W x H) Additional information: • Very good technical condition • The attached photos show the actual state of the item for sale • Possibility to switch on and test the machine on site.

Condition: ready for operation (used), functionality: fully functional, Thickness planer SAC RS53, 4 knives Specification: • Condition – used, after inspection • Working width – 530 mm • Working height – 240 mm • Motor power – 4.0 kW • 4-knife cutterhead for traditional knives • Analog thickness indicator Iaedpfx Ajxdxk Tsbcep • 2 feed speeds • Full, straight infeed roller before the cutterhead • Two steel outfeed rollers after the cutterhead • Slip roller in the lower table • Manual height adjustment (up/down) • Table supported by a single solid piston • Original paintwork • Outlet for chip extraction, diameter 145 mm • Weight approx. 800 kg • Overall dimensions: 95 x 100 x 105 cm (L x W x H) Additional information: • The photos shown reflect the actual condition of the item for sale • Possible to power on and test the machine on site.

Condition: excellent (used), Catalogue number: 7265 TECHNICAL DATA SURFACE PLANER: - Shaft width: 510 mm - Noise-reducing comb - Shaft guard - Original cast iron tilting fence - Table length: 2060 mm - Both infeed and outfeed tables adjustable - Extraction port diameter: 150 mm THICKNESSER: - Maximum workpiece thickness: 200 mm - Thicknesser shaft guard - Electric height adjustment for planing depth From above: - Anti-kickback fingers - Serrated infeed roller - Pressure bar - Planing cutterblock - Pressure bar - Smooth outfeed roller From below: - 2 adjustable rollers on lower table - 2 feed speeds: 7 / 14 m/min - Extraction port diameter: 150 mm - Brake - Main motor: 4 kW - Dimensions (LxWxH): 2200 x 1400 x 1050 mm - Weight: 1055 kg ADVANTAGES – Made in Germany – Brake – Noise-reducing comb – Electric planing height adjustment – Not repainted – Very good condition, used machine Original photos Start-up video: youtube.com/watch?v=7_aygbppcsY Iaedpjx Sq A Hofx Abcep Net price: 16,900 PLN Net price: 4,020 EUR (based on 4.2 PLN/EUR exchange rate) (Prices may change with greater fluctuations)

Condition: excellent (used), Catalogue number 6309 TECHNICAL SPECIFICATIONS SURFACE PLANER: - shaft width: 510 mm - 3-knife cutterblock - adjustable tilting fence Ijdpfxjx Sqz Aj Abcoap - table length: 1910 mm - both tables adjustable THICKNESSER: - max thickness of processed element: 200 mm - thicknesser cutterblock guard from above: - anti-kickback fingers - geared feed roller - planing cutterblock - smooth outfeed roller - stepless feed speed adjustment: 7–14 m/min - main motor approx. 4 kW - cutterblock speed: 3000/6000 rpm - dimensions (LxWxH): 1910x870x970 mm - weight: 780 kg – Italian manufacture – Very good condition, used machine Net price: PLN 14,500 Net price: EUR 3,450 Net price calculated at exchange rate 4.2 PLN/EUR (price may change in case of major exchange rate fluctuations)

Condition: new, Catalogue No. S0336 TECHNICAL SPECIFICATIONS - Surface planer table length: 1800 mm - Working width: 410 mm - Working height: 225 mm - Spindle speed: 4500 RPM - Number of knives: 4 pcs - Spindle diameter: 100 mm - Motor power S1: 4/5.6 kW - Voltage: 400 V - Dimensions (L/W/H): 1900/800/1300 mm - Weight: 495 kg Four-knife cutterblock ensures precise machining, High-grade construction and finish, Foldable planer tables to the rear—do not limit thicknesser functionality, Table made of grey cast iron with ground surface, Adjustable thicknessing rollers for optimal workpiece feed, Sturdy tiltable fence adjustable from 90° to 45°, Precisely mounted reversing knife spindle, Thicknesser table with central column guidance and stabilizer, Space-saving side-mounted profile fence. Scope of delivery: – Knives (installed), – Heavy profile fence, – Two rollers in the lower thicknesser table Optional equipment: – Horizontal borer, – Spare knives 410 x 25 x 3.0 mm Net price: 15,700 PLN Net price: 3,710 EUR (based on exchange rate 4.2 EUR) (Prices may vary due to significant exchange rate fluctuations) Iodsx R Dumspfx Abcsap

Condition: like new (used), Year of construction: 2014, functionality: fully functional, planing width: 630 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,500 rpm, total width: 1,200 mm, total height: 1,100 mm, overall weight: 1,050 kg, working width: 630 mm, spindle diameter: 120 mm, workpiece width (max.): 630 mm, workpiece height (max.): 300 mm, height adjustment type: electric, number of feed rollers: 2, planing height: 300 mm, working height: 300 mm, Equipment: CE marking, documentation/manual, SCM SP2 S63 Thickness Planer | 630 Planer | Planing Height 300mm | LIKE NEW! THICKNESS PLANER FROM ITALIAN BRAND SCM Machine in excellent technical and visual condition, ready for work. The machine operates very quietly. Technical parameters: - cutter block width: 630 mm - maximum planing height: 300 mm - 4-knife TERSA cutter block - spindle speed: 4500 RPM - power: 7.5kW - electric table height adjustment - stepless feed speed adjustment: 5-18 m/min - anti-kickback fingers row - cutter block guard - 2 table rollers Planer dimensions: - length: 1300mm - width: 1200mm - height: 1100mm - weight: ~1050kg Where can you see our machines? JBS WOODWORKING MACHINES WOLICA DRUGA 26 23-310 MODLIBORZYCE LUBELSKIE, POLAND Possibility to test the machine on site Machine financing available via leasing or installments. WE ORGANIZE TRANSPORT jbsmaszyny.pl Iaodpfx Ajxwd R Ssbcop tel: 664 335 465 tel: 530 632 386

Condition: new, Catalogue number: S 0335 - New machine, in stock - CE certificate SURFACE PLANER: - Working table dimensions: 1500 х 320 mm - Max. planing depth: 5 mm - Aluminium guide fence dimensions: 1100 x 155 mm Iaodpfxeyg Iwco Abcsp THICKNESS PLANER: - Working table dimensions: 316 x 600 mm - Max. planing depth: 3 mm - Feed speed: 7 m/min - Material thickness: 4 - 230 mm - Motor power: 3 kW - Cutterhead speed: 5600 min⁻¹ - Dimensions (L/W/H): 1500/600/1050 mm - Weight: 315 kg * Cast iron tables with ground surface * Tables with precise adjustment for longitudinal planing * Stable aluminium fence adjustable from 90° to 45° * Cutterhead guard * Thickness planer table with central guide column and support * Power on/off without stopping the machine * Mortiser with left-hand rotation Net price: 14,500 PLN Net price: 3,440 EUR Price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7695 TECHNICAL DATA - shaft width: 640mm - number of knives: 4 - max thickness of processed workpiece: 200mm *from above: - pawls - feed roller, toothed, sequential (split, segmented) - pressure rollers Iedpfx Asyg Inusbcoap - planing shaft - pressure rollers - outfeed roller, smooth *from below: - slip roller, smooth, at entry - feed roller, smooth, at exit - adjustable rollers in the lower table - electric table elevation - main motor: 7.5kW - stepless feed speed adjustment: 8-24m/min - extraction port diameter: 180mm - dimensions (L/W/H): 1400x1100x1650mm - weight: 1650kg Net price: 17,900 PLN Net price: 4,260 EUR (based on 4.2 EUR rate) (Prices may change with greater fluctuations)

Condition: new, - extra long - one piece - planing tables (2250 mm) from cast iron - simultaneous opening and closing of planer tables with locking system - heavy duty industrial style main motor - fixed suction hood - planer fence dimension 1200 x 150 mm with small parts fence Iaedpocq E Uuefx Abcjp - feeder with 4 feed speeds and separate motor - thicknesser table mounted on 4 solid spindles and linear guides - high quality steel anvil roller - rubber coated outfeed roller - digital display of thicknessing height - autom. star triangle switch techiscal data: total planer table lenght 2250 mm max. working width 520 mm max. chip removal 5 mm dimensions thicknessing table 850 x 520 mm min/max. working height 3/ 240 mm feed speeds 5/ /8 /12/ 18 m/min planer head dimension 120 mm/ incl. 4 pcs HSS cutter knifes planer head speed 5000 1/min main motor 400 V/50 Hz/S6 - 40 % 7,0 kW suction hood dimension 1 x 120 mm weight approx. 650 kg - "Teresa"-cutter block Ø 120 mm, mono block, with 4 knifes - additional fence for small work pieces - motorised height adjustment for thicknesser table with digital read out - thicknesser table with 2 rollers

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Electrical equipment: 400V/50Hz with CE-compliant safety circuit and motor brake Isdpfx Aswzzyuobcjap The jointer tables fold to the rear, allowing for space-saving installation Integrated, foldable chip extraction hood, connection diameter 120 mm The infeed table is adjusted via a parallelogram mechanism Both jointer tables feature noise-reducing table lips Precision bearing cutterhead with reversible knives Thicknessing table with centrally guided column and support Adjustable spirally serrated feed roller for optimum planing results Technical data: Jointer width: 410 mm Table length: 1800 mm Table height: 850 mm Cutterhead speed: 4500 rpm 4-knife cutterhead Cutterhead diameter: 100 mm Jointer fence tiltable: 90 - 45° Max. cutting depth: 5 mm Motor power: 4 kW Thicknessing: Thicknessing table length: 700 mm Planing width: 405 mm Workpiece clearance min./max.: 3 - 225 mm Max. cutting depth: 5 mm Feed speed: 8 m/min Net weight: approx. 420 kg Space required: 1800 x 850 mm Availability: short notice Location: Röllbach

Condition: excellent (used), Year of construction: 2006, Guilliet LKT 630 thicknesser Working width 630mm Working height 300mm Shaft with 4 knives Shaft with conventional knives Shaft diameter 120mm Programmer for height setting Two feed speeds 8-16m/min Total power 8.5kw CE certificate Year of production 2006 Isdencbh Uopfx Abcsap Weight 950kg

Condition: new, Year of construction: 2026, Machine features This planer and thicknesser is a well-designed machine, providing large adjustment and mechanical machining possibilities of hard and soft wood. Adjustment itself is relatively simple and transforming the planer into a thicknesser takes only a couple of seconds. Relatively high weight (148 kg) ensures stability, and work safety, reducing vibrations with additional anti-vibration feet. Advantages of the planer Both tables of the planer are made of high-quality cast iron, with ground and Ra 1.6 polished surface Shaft guard can be freely set, adjusting its height, angle as well as extension Angular guide can be smoothly adjusted in the 90° – 45° range Planer tables involve additional sound dampeners decreasing noise Advantages of the thicknesser Thicknesser table is made of high-quality cast iron, with ground and polished surface Height is adjusted through a large and convenient handwheel, which, after adjustment, can be locked with an additional eccentric Its table is supported in 3 places Thicknessing can be lowered down to 190 mm Machine equipped with rollers (driving and receiving) which are located very close to the shaft, allowing for machining even short elements Roller feed drive is based on a belt, ensuring slip-free work (no "tooth marks" on the workpiece) Technical data Knife shaft diameter 75 mm Knife shaft speed 4800 rpm Extracting connector diameter 100 mm Swinging rule tilt angle 0–45° Number of knives 3 Maximum surface planer width Isdjvxh Nrspfx Abceap 250 mm Maximum thickness planer width 248 mm Maximum surface planing height 180 mm Maximum thickness planer machining depth 3 mm Maximum surface planer machining depth 2.5 mm Thickness planer feed speed 6 m/min Dimensions (L×W) 1080×260 mm Weight 150 kg Motor power 2.0 kW Power supply 3 phase, 400V

Condition: new, Year of construction: 2026, VERSION with the most powerful engine with a total power of S6: 2.6kW. A more powerful engine means stable operation and easy processing of hard materials: Hardwood requires more force for processing. A powerful engine will handle this without a problem. The latest version of the machine with an innovative tabletop opening system: Competitive old-type machines have "butterfly" tabletops. Before each start of work, the feed table and the receiving table should be calibrated with each other. Even small differences between them lead to damage in the material, giving undesirable effects. The new solution of connected tabletops allows for precise adjustment of both tables at the same time! Thanks to this, once set, the tables are permanently calibrated. When changing the planing height, both tables move simultaneously. Such a solution not only saves time, makes work with the machine more convenient, but also increases the precision of planing by 30% compared to the old solution. This is very important, especially when working with thinner materials. Trouble-free change from a planer to a thicknesser. The transition from planer to thicknesser is very quick and easy. It consists of unlocking the eccentrics and lifting the tables and moving the chip extraction cover. Work precision. Smooth height adjustment of the tops with a scale. The thicknesser table mounted centrally on the column has a knob for adjusting the setting up and down Aluminum swinging ruler (700x150 mm) with a scale strip allowing for precise setting at an angle in the range of 90-45 degrees. Technical parameters Knife shaft diameter 75 mm Knife shaft speed 4000 rpm Suction nozzle diameter 100 mm Swing ruler tilt angle 90–45° Number of knives 3 Shaft length 250 mm Knife dimensions 250x30x3 mm Maximum planer width 250 mm Maximum thicknesser width 250 mm Maximum planing height 180 mm Maximum thicknesser cutting depth 3 mm Maximum planer cutting depth 2.5 mm Iaedpfxevxh A Ss Abcjp Thicknesser feed speed 6 m/min Fence size 700 x 150 mm Machine dimensions (length x width) 1080 x 269 mm Weight 175 kg Total engine power S1: 2.2 kW S6: 2.6 kW Power supply 400V