Press container

Aventek RM20

Condition: new, Year of construction: 2025, container length: 3.6 ft, color: white, overall weight: 600 kg, maximum load weight: 600 kg, empty load weight: 600 kg, loading space volume: 3.4 m³, loading space width: 1,100 mm, loading space length: 1,200 mm, loading space height: 2,600 mm, machine/vehicle number: Sanitärcontainer WC, Equipment: bathroom, Sanitary container | WC container | Shower container | Toilet container | Double WC container | 110cmx120cm | Model WC | High-quality and flexible solution Gksdpfx Ahevxht Rs Dsf Available products can be viewed in our warehouse and picked up directly. Our office and residential containers offer an excellent solution for a variety of applications. They are characterized by outstanding quality, maximum flexibility and short delivery times. Technical details: Dimensions: • Length: 120 cm • Width: 110 cm • Height: 260 cm • Weight: 400 kg Insulation: • Ceiling/wall: 6 cm PUR (polyurethane) • Optional: 10 cm insulation with PUR, PIR or rock wool available • Floor: 16 mm fiber cement board • PVC covering Equipment: • 1 room • 1 external door • 1 toilet with washbasin • 1 ventilation Colors: • Facade color: RAL 9002 • Frame color: RAL 9002 • Customization: Individual design possible according to customer's wishes High-quality workmanship for long-term use Stock & delivery: • In stock: Same day shipping • Not in stock: Production time 2 to 4 weeks depending on model • Worldwide shipping: We offer professional shipping to all countries to ensure fast and reliable delivery. • Individual dimensions: Products can be manufactured according to the customer's specific requirements. Showroom address: Im Mannenberg 9a, 53557 Bad Hönningen We are happy to assist you with further information or tailor-made adjustments!

Condition: excellent (used), Year of construction: 2010, Material Testing Machine: ZwickRoell GmbH mod.Z005 TN Designed to perform standard tests on materials and components, allowing for precise measurements of strength, flexibility, and other material properties, which are crucial in engineering and material research. With advanced technology and intuitive software, these machines offer efficient and safe operation. The device includes accessories for measuring material tensile strength, compression, and bending. Technical Specifications: • Year of production: 2010 • Maximum load (Fmax): 5 kN • Test dimensions: - Height (without accessories): 1070 mm - Stroke height: 1000 mm • Frame dimensions: - Height: 1340 ... 1345 mm - Width: 770 mm - Depth: 439 mm • Weight: approximately 110 kg Gsdpfxeuna Ius Ah Djkf • Power supply: 230 V, 1Ph/N/PE, power consumption about 800VA The machine allows for the testing of various materials and components, including: • Construction materials: concrete, steel, wood • Plastics: flexibility, tensile strength • Metals: strength, hardness, and fatigue testing • Mechanical components: compression, bending, and tensile tests • Samples in various forms: thin-layered, block-shaped, tubular Thanks to the system's flexibility, tests can be adapted to specific requirements. TAG: Laboratory Equipment, Material Testing, EPS Styrofoam, Polystyrene Production, Mechanical Testing, Thermal Conductivity, Material Properties, Construction Materials, Quality Control, Engineering Research

Condition: used, Year of construction: 1996, Year: 1996 / overhauled in 2008 Technical specifications and equipment: • 8 printing units Material width: 620 mm Printing width: 600 mm Print repeat lengths: 250 – 520 mm Materials processed: • PA: 20 – 60 µm • LDPE: 20 – 150 µm • HDPE, OPP and similar films: 12 – 80 µm, max. 120 µm Gkodpfx Aoxfvrweh Dof • Laminated films • Paper: 25 – 120 g/m² Mechanical machine speed: up to 200 m/min (depending on substrate) Main equipment: • Impression cylinder with new nickel-plasma coating • Impression cylinder temperature control unit • Non-stop unwinder with web tension measurement and control, including splice table, roll diameter 600 mm, core ID 76 mm • Nip roller before 1st printing unit • 8 doctor-blade printing stations • Speed assist system • Drive elements from the printing unit to the bridge • Intercolor dryers • Web guiding before printing • Bridge with bridge dryer • Web video inspection system • Edge guiding before rewinding with 3 slitting discs and suction • Non-stop rewinder with pneumatic slitting and web tension measurement and control, roll diameter 600 mm, core ID 76 mm • 8 chamber doctor blades plus 8 additional coated doctor blades • 8 electric pumps, new • 8 ink vessels (10 L each) with hose connections, new • 8 ink catch trays plus 4 extra trays • 1 service trolley for anilox roll and sleeve handling • 1 service trolley for chamber doctor blade and ink tray handling • 8 printing sleeves, new, print length 320 mm, make: Rotec Conductive Blue Light • 8 format gears, new, print length 280 mm • 8 ceramic anilox sleeves, new. Base bodies ordered from Apex. Company Wareg will obtain required sleeve type directly from Apex; only for UniFlex sleeves will Wareg incur the additional costs. • ATEX-compliant • New Siemens S7 control system

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. Gksdpfxju Thhro Ah Dof The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Bunker conveyor suitable for the feeding of presses, shredding, etc.. Delivery throughout Europe possible. Technical data: POS. 1 feed hopper Gksdodxwlqspfx Ah Dof POS. Task 2, vol. 1, 5kW, conveyor width: 1100 mm, axis dimensions: 3500 mm POS. Platform 3, volume 1, 1kW, conveyor width: 1100 mm, axle size: 4700 mm Standard discharge height: 2800 mm (greater than possible with distance feet as shown on the illustration) Ordering goods Further information and data upon request

Year of construction: 2024, condition: new, The JC 500 jaw crusher is ideal for crushing hard, brittle, hard-tough samples such as ceramics, clinker, coke, building materials, ferroalloys, glass, minerals, ores, precious metals, rocks, silicon, slag and much more. Gkodpfx Aoiamq Hoh Def

Condition: good (used), functionality: fully functional, power: 122 kW (165.87 HP), fuel type: diesel, color: green, Year of construction: 2006, machine/vehicle number: 830.0.354, Machine has received new engine in 07/2022 Deutz BF6M1013ECP .Hydraulik pump is refurbished. Machine is dry , everything works. First hand owner maintained . All service available Gsdpfx Aoufibqsh Dskf

Condition: new, Fully automatic palletizing system HYDRA+ cobot palletizer: 👉 up to 20 kg payload (optionally up to 25 kg) and 👉 up to 2 m palletizing height Depending on customer requirements, we offer different configurations of our palletising system. 💶 For full price details of the Cobot palletiser with 20 kg payload, please refer to the detailed price package (see attached PDF in EN 👉 8136716-2.pdf). The palletizing system includes: → Collaborative robot DOOSAN ROBOTICS Cobot H2017 for up to 20 kg payload; (optionally adaptable up to 25 kg payload with DOOSAN H2515) → Robot base and operating elements → Pallet frame for 2 Euro pallets → FJM suction pad for handling packages, construction as required → innovative palletizer software → individual design according to customer requirements → palletizing system, firmware and software up to date Gkjdpfx Asi Emapsh Djf ❗ For logistical reasons, we only deliver within the DACH regions and countries bordering Austria. HYDRA cobot palletiser by FJ Mayer GmbH Developed and programmed by Franz Josef Mayer GmbH Austria. ©Franz Josef Mayer GmbH 2021

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Gedovwlqqepfx Ah Dekf Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: like new (used), Year of construction: 2014, operating hours: 15,000 h, Atlas Copco compressor stage after refurbishment. Gkedpfx Aemzbdweh Def