Machining center

Averex HS-540i GTS 8 APC

Condition: ready for operation (used), Year of construction: 2009, operating hours: 9,192 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 16,000 rpm, number of axes: 3, This 3-axis HERMLE C 1200 vertical machining centre was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and includes 30 tool stations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 1200 machine we have for sale. Contact us for further details. • X – 1200 mm Fodpjylw Stefx Aa Nogb • Y – 900 mm • Z – 500 mm • Machining Center C 1200 V • Heidenhain iTNC 530 contouring control • Spindle 16,000 rpm • SK 40 • 30 Tool Stations • Rigid Clamping Table • Coolant System • Electronic thermal compensation (iTNC) with temperature sensors on the motor spindle and machine base • Portal design with a closed rear wall for significantly better support during torsional loads • Two axes are located in the tool, providing very good mass distribution and ideal conditions for high rapid traverse and feed rates • Feed screw diameter and pitch (X and Z axes): 40 / 20 mm • Feed screw diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Position tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature for maintaining accuracy: 20 °C ± 1 °C • Flushing/wash-down system for rinsing the side work area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent slots: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Chip-to-chip tool change time according to VDI 2852: 6.5 seconds • Manual control unit includes electronic handwheel, axis direction keys, feed control, rapid traverse, emergency stop, and enable switch • Machine on – 11,927 h • Spindle on – 9,192 h Additional equipment • Chip conveyor • Heidenhain touch probe • Electronic Manual Control Module (iTNC) Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2007, Fanuc Robodrill Alpha T21iEL 5-axis machine Year of manufacture: 2007 Control: Fanuc 31i Manual Guide Axis travels: Fgsdpfxoyg Hl Ee Aa Njb -X: 700 mm -Y: 400 mm -Z: 330 mm -C: 360 degrees -B axis 4th and 5th axis: Tsudakoma TN130 rotary table Spindle: max. 24,000 rpm Spindle taper: BT30 Tool magazine: 21 positions -documentation -coolant tank with pump

Condition: good (used), Year of construction: 2007, Parts shown by hand not come. Technical details shown on picture. Fgjdpfx Aaerpn Dve Njb

Condition: ready for operation (used), Year of construction: 2011, operating hours: 35,044 h, spindle speed (max.): 10,000 rpm, total height: 3,000 mm, total width: 2,500 mm, overall weight: 11,000 kg, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle motor power: 16,800 W, product length (max.): 2,500 mm, table load: 500 kg, tool weight: 8,000 g, number of slots in tool magazine: 82, number of axes: 5, This 5-axis HERMLE C40U Dynamic universal machining centre was manufactured in 2011. It features a travel of 850 mm in the X-axis, 700 mm in the Y-axis, and 500 mm in the Z-axis. The machine has a maximum spindle speed of 10,000 rpm and a magazine capacity of 38 positions plus 43 additional. If you are looking to get high-quality machining capabilities, consider the HERMLE C40U Dynamic machine we have for sale. Contact us for further details. • Utilization: 70% • Shifts: 2 Fedpfx Ajy Al Ufja Nogb • Operating hours: 35,044.4 h • Rotary table diameter: 420 mm • Clamping surface diameter: 420 mm • Spindle: • Power at 40%: 1500 rpm = 25 / 16.8 kW; 10,000 rpm = 7 kW • Torque at 40%: 1500 rpm = 159 / 107 Nm; 10,000 rpm = 6.7 Nm • Tooling/magazine: • Number of revolvers/magazines: 2 • Magazine capacity: 38 positions • Additional magazine + 43 positions • Maximum tool length: 300 mm • Maximum tool diameter: 140 mm • Knoll Cooling • Renishaw OMP 40 probe • IKZ (inner cooling through spindle) • Laser beam monitoring • Chip conveyor • SK 40 • Operating voltage 400 V/3~ • Mains frequency 50 Hz • Control voltage 24 V- • Total nominal current 60 A • Total performance 41 kVA Additional equipment • OPTIONAL for an additional charge: Tooling package available: approx. 530 tools • OPTIONAL for an additional charge: Zero-Point Clamping SystemMachine was maintained in 2025 by HERMLE officialIn August 2025, the spindle head was replaced and the geometry was checked and adjusted again by HERMLE official Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2018, operating hours: 5,500 h, functionality: fully functional, Control SIEMENS 840D SL Shopturn Swing diameter over bed 580 mm Swing diameter over slides 320 mm Max. turning diameter 320 mm X travel 242 mm Y travel +/- 40 mm Fedpfx Aaoyr I A Aj Nogb Z travel 540 mm Distance between centers 780 mm Rapid traverse X/Z 30/36 m/min Rapid traverse Y 22.5 m/min Spindle speed 5000 rpm Spindle nose A2-6 Spindle bore D73 mm Through hole 51 mm Drive power 16.5/11 kW Turntable 12-station (with internal coolant supply) Spindle taper VDI30 C-axis programmable Tailstock sleeve Morse 4 Tailstock travel 550 mm Hydraulic action Power consumption 28 kVA Weight approx. 4400 g kg Dimensions (with chip conveyor) 2800 (3680) x 1780 x 1850 mm Accessories, Equipment - D210 mm SMW hydraulic chuck with 65 mm bore (spindle locked) - Chip conveyor (conveyor belt) - Coolant system - C+Y axes - Integrated tool measuring arm - Tailstock - Manuals

Condition: good (used), Year of construction: 2014, operating hours: 8,035 h, functionality: fully functional, machine/vehicle number: MH0017-000100, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: fanuc, controller model: 31i, operating hours of spindle: 6,000 h, New Doosan horizontal machining center type NHP 8000 with Fanuc control unit type 31i Included equipment and options: Fjdpfxewu Rgqj Aa Nsgb Pallet centering system 800*800 Coolant supply with hand gun High-pressure coolant 70 bar, 7.5 kW with cyclonic filtration Automatic tool changer Tool load management Chip conveyor Renishaw RMP60 workpiece probe TS27R tool probe

Condition: new, Year of construction: 2022, functionality: fully functional, turning height: 2,000 mm, workpiece weight (max.): 12,000 kg, turning diameter over cross slide: 2,500 mm, turning diameter: 2,500 mm, faceplate diameter: 2,000 mm, total height: 7,260 mm, total width: 6,280 mm, total length: 4,500 mm, rotational speed (max.): 200 rpm, rotational speed (min.): 1 rpm, torque: 40,400 Nm, spindle speed (min.): 1 rpm, warranty duration: 24 months, overall weight: 45,000 kg, faceplate torque: 40,400 Nm, Equipment: documentation/manual, rotational speed infinitely variable, Vertical turret lathe in flat-guided design with extensive full equipment: WITH MILLING FUNCTION - Milling spindle 2000rpm SK50 22 KW Fgjdpovtytxjfx Aa Nob - C - axis 0.001 degrees - Complete housing - Chip conveyor - Internal coolant supply - Fanuc control - 24 tools - 12 milling tools - Manual Guide I - Tool holder package - Electronic handwheel - Signal light - Manual 3-jaw faceplate 2000mm - Renishaw tool measurement - Renishaw workpiece measurement - Glass scales in X and Z axes - 24 month guarantee

Condition: good (used), Year of construction: 2008, - Max. turning diameter over bed: 700 mm Fjdpjxmirgjfx Aa Negb - Turning length: 1,500 mm Main spindle: - Speed range: 2,800 rpm - Enlarged main spindle: Ø 150 mm, bore: 110 mm - Drive power: 30 kW, 900 Nm - Spindle nose: Size 11 Total power requirement: 59.5 kVA Approx. machine weight: 14.5 t Space requirement approx.: 6.4 x 3.0 x 2.6 m EQUIPMENT: - 3-jaw chuck, SMW KNCS-N 400 K11 - Tailstock - Programmable CNC steady rest slide (cross slide NOT retractable) - SMW-AUTOBLOK SLU-3, self-centering steady rest, clamping range Ø 12 - 152 mm - Full clamping cylinder for partial hollow clamping, draw tube bore max. Ø 100 mm - In-process measuring system Renishaw for X-/Z-/C-axis - Programmable CNC tailstock on W-axis - Drilling/milling spindle and C-axis 0.001° - Tool changer: 80 positions Tool system: HSK-A63 - Y-axis travel +115/-115 = 230 mm - B-axis 225°, positioning in 0.001° increments - ICS / internal coolant supply for driven tools - Synchronized thread cutting with driven tools - Software for use of multifunctional tools, e.g. special tool with radially arranged indexable inserts, which can be positioned in the drilling/milling spindle at 60°, 90°, 120° and 180° positions - Software for gear hobbing for straight and helical gearing with speed synchronization of main and milling spindles - Electrostatic extraction unit - Chip conveyor - Documentation - CE marking

Condition: used, Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 850 mm, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 50,000 m/min, rapid traverse Z-axis: 50,000 m/min, nominal power (apparent): 22 kVA, controller manufacturer: MORI SEIKI, controller model: MSX-711 IV, table load: 500 kg, number of slots in tool magazine: 60, tool length: 500 mm, tool diameter: 140 mm, tool weight: 12 g, MORI SEIKI NH-5000 DCG/40 Horizontal Machining Center The MORI SEIKI NH-5000 DCG/40 is a high-performance horizontal machining center, designed to ensure exceptional precision, reliability, and continuous productivity, even for the most complex machining operations. Main features: Year of manufacture: 2010 CNC Control: Mori Seiki MSX-711 IV Machine weight: 12,700 kg Machine footprint (LxWxH): 4,628 x 4,952 x 3,012 mm Spindle: Spindle taper: ISO-40 Maximum speed: 14,000 rpm Spindle motor power: 18.5 / 22 kW (S1/S6) Working Capacity (axis travels): X axis: 730 mm Y axis: 730 mm Z axis: 850 mm Distance spindle center – pallet surface: 100 – 830 mm Distance spindle nose – pallet center: 100 – 950 mm Max. workpiece dimensions: Ø800 x 1,000 mm Rotary table: Dimensions: 500 x 500 mm Number of stations: 2 (with automatic pallet changer) Pallet load capacity: 500 kg Continuous table rotation: 360,000 positions Feed rates: Rapid traverse (X/Y/Z): 50,000 mm/min Working feed rates (X/Y/Z): 1 – 50,000 mm/min Tool changer: Tool taper: MAS BT-40 Shank: 90° Mori Seiki type Tool magazine capacity: 60 positions Max. tool diameter: Ø140 mm (without adjacent tools: Ø70 mm) Max. tool length: 500 mm Max. tool weight: 12 kg Equipment and accessories: Chip conveyor Coolant collection tank with wash pumps + external tank with paper filter Fedpfx Aaewxygzs Nsgb High-pressure coolant pump through the spindle line Spindle head air conditioner and transformer Retractable tool presetting sensor Full technical documentation (manuals, electrical diagrams, CE declaration) Ideal for advanced machine shops and intensive production, the NH-5000 DCG/40 combines structural rigidity with advanced CNC technology, ensuring high-speed, high-precision machining of complex parts.

Condition: new, Year of construction: 2021, functionality: fully functional, Stock machine "NEW" – available at short notice! (Subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine Table: Table size: 950 x 550 mm Load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 Distance between T-slots: 150 mm Travel axes: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 – 700 mm Linear guides & speeds: Ball linear guides in X/Y axes Roller linear guide in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feedrate during milling: 0 – 10,000 mm/min Smallest increment: 0.001 mm Tool magazine (CAM-Type) / changer: Number of magazine pockets: 30 Fgedpfxjifn N Nj Aa Nob System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with adjacent pockets free: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300 liter tank and pumps External coolant around spindle Chip augers right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operator panel Electronic handwheel (wired) Central lubrication oil/air Full enclosure Work light Heat exchanger at control cabinet Auto power-off function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE declaration of conformity according to European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required installation area: W3,160 x D3,000 x H3,000 mm (incl. chip conveyor ejection to the left) Machine weight: approx. 5,400 kg (net) Available special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Drum-type tool magazine with 30 pockets, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC controls), incl. wiring and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - Through-spindle coolant pump, 20 bar pressure, for direct-driven spindles - Includes cartridge filter - Belt-type chip conveyor including chip cart (chip discharge at front, to the left side of the machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measurement system and tool breakage monitoring in the machine, incl. bracket - Auto-door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown With RoboJob Mill Assist 25kg (Year of construction 2025 – NEW) - Full enclosure - Double gripper Available immediately