Laminating machine

Bagel DIGIFAV-B2 L530

Condition: good (used), Year of construction: 2004, Used Bullmer 7501 XL cutting machine - useful cutting window width 180 cm. - max cutting thickness 7 cm. - in good condition. Kodjrtnh Ejpfx Af Send

Year of construction: 2012, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER X-AXIS TRAVEL: 4064 mm Y-AXIS TRAVEL: 2032 mm Z-AXIS TRAVEL: 70 mm WORKING AREA: 4000 x 2000 mm ADMITTED LOAD ON TABLE: 1270 Kg SOURCE: FIBER 4000 ; 4000 W CONTROL UNIT: ByVISION WEIGHT: 15000 Kg OVERALL DIMENSIONS: 12900 x 6750 x 2500 mm ACCESSORIES: FUME EXHAUSTER Knsdpevghbqefx Af Sed NOTE: AUTOMATIC NOZZLE CHANGE

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, total length: 2,700 mm, total width: 1,200 mm, working width: 530 mm, Industrial machine lamination for offset and digital, simultaneous front & back laminating. The machine is equipment with Heidelberg vacuum feed. New equipment ! Equipment has not been used for work but only for initial testing/installation. Laminating machine to be perfectly adapted for both offset printing and digital printing with dry toner. Maximum speed: 25 m/min (working speed is variable depending on several factors: paper/cardboard substrate, the type and quality of the laminating foil and the type of printing (offset, ink, laser or digital). It can laminate one side or both sides in one pass, working speed up to 25 m/min can be achieved even in double-sided mode. - Maximum average size 53 X 100 cm; Knsdpfomcw T Tsx Af Ssd - minimum dimensions width 30 cm X length 20 cm; - average thickness between 115 gsm and 600 gsm; Full option equipment: - automatically overlaps and separates plasticised sheets, - allows adjustment of pneumatic pressure between the rolls and can work in heavy duty mode in case of large runs such as packaging. - can laminate even plastic window packaging with non-adhesive rollers (2 non-adhesive rollers); - the way to apply metal foil and achieve selective lacquer effect; - adjustable hydraulic pressure; - Hilderberg vacuum feed from 54 cm high stack and automatic lift and 6 bar 130 l/min external compressor; - jogger for receiving laminated sheets, with 10 cm stack; - equipped with 2 pneumatic axles for fixing the laminating roll; - equipped with 2 pairs of press rollers for front/back lamination; - accepts 3000 m rolls, foil between 24 and 31 microns; - BOPP film accepted between 23 and 42 microns, Nylon maximum 35 microns, PET maximum 35 microns (regardless of film producer); - longitudinal slitting knife; - longitudinal perforating knife; Floor area 120 x 270 cm Power supply: 3-phase, 400V AC, 50-60 Hz Power consumption: 7,500 W The machine is equipped with the following options: 2 non-stick cylinders 2 pneumatic axles for fixing the rolling roll 2 pairs of press rolls for double-sided lamination FOILER - unit for foiling and laminating with UV selective varnishing effect Jogger for receiving laminated sheets Large format module (max.53x100cm) Negociable price EXW - old price 49.000 - new price 30.000 euro + VAT (without VAT in EU).

Condition: like new (used), Year of construction: 2015, operating hours: 3,600 h, functionality: fully functional, machine/vehicle number: 2667, AUTOMATICALLY-FED SOLID FUEL BOILER MOD. EOS 50 INCLUDES SPRING-LOADED ROTARY WOOD CHIP FEED SYSTEM AS PER PHOTO COMPLETE WITH WATER CIRCULATION AND STORAGE SYSTEM AS SHOWN IN THE PHOTOS FULLY FUNCTIONAL SERIAL NO. 2667 YEAR OF MANUFACTURE: 2014 THERMAL OUTPUT AT THE COMBUSTION CHAMBER: 650 KW USEFUL THERMAL OUTPUT: 550 KW OTHER APPLICABLE EU DIRECTIVES: 2004/108/EC; 2006/95/EC Kjdpfx Asw E E Tajf Send APPLICABLE STANDARDS / TECHNICAL SPECIFICATIONS: EN303-5; EN60335-2-102; EN14891-1

Condition: excellent (used), Year of construction: 2001, Wenzel Lh 108 automatic measuring machine Measuring range: 1000x1600x800 Head: Renishaw Ph10M Tactile Sensor: TP20 Probe changer: -- Controller: Pantec Eagle Knjdpfeipq I Iex Af Ssd Software: CMM Manager Lite 2024 Year of construction: 2001 Warranty: in terms to be agreed upon Description: machine fully functional and in excellent cosmetic condition: Pneumatic system completely overhauled;

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 1630, overall weight: 7,800 kg, warranty duration: 6 months, power: 85 kW (115.57 HP), Fully refurbished DI PIU BRIK MB100 briquetting machine (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting, suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory, with all vital components, cables, wiring, and necessary electrical equipment replaced. The machine is restored to 'as new' condition and comes with a 6-month factory warranty from Di Più. The machine can produce briquettes with or without a hole, with diameters from 90 mm up to 110 mm, from softwood or hardwood, round or square. The machine can be inspected at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy The Di Piu BRIK MB100 mechanical briquetting press is an automatic machine for compressing wood, sawdust, and other waste materials into wooden briquettes. Optimal input material moisture: 8%–12%, particle size: 1–12 mm. Technical specifications: - Production capacity: 1,300–2,300 kg/h (with sawdust density 160–200 kg/m³) - Briquette diameter: 90–110 mm Knsdpfx Afewrp Ems Sjd - Main motor power: 75 kW - Total installed power: 98 kW - Compression pressure: 2,000–2,500 kg/cm² - Vertical screw conveyor with gearbox: 5.5 kW - Oil pump: 1.5 kW - Oil pump for extrusion head closure: 1.5 kW - Variable speed screw feeder: 1.5 kW - Lubrication oil system for bronze bearings: 100 liters - Briquette output sensor (auto shutoff when feedstock is empty) - Safety covers for moving parts - Oil pressure sensor - Control cabinet - Feedstock hopper (accumulator) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine comes fully equipped for complete operation and integration into a briquetting line. Additional equipment – MB100: - Dosing silo: Made of heavy-duty steel construction. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW geared motor, mounted on a robust steel frame. Filling is monitored by a level sensor. - 20 m post-extrusion briquette cooling line - Automatic saw for briquette cutting - Saw automatically cuts briquettes to operator-defined lengths - Device for producing briquettes with holes - Head cooling system with chilled water - System produces 50 l/min of ice water for efficient briquetting head cooling - Air-cooled water chiller with hermetic spiral compressors, microprocessor control, and large energy storage tank with submerged water–coolant heat exchanger - High-efficiency “fin-pack” heat exchanger made of copper tubes and aluminum fins - 800-liter water tank - Water feed pump (50 l/min – 20 m head – 0.55 kW) with three-way DN25 valves for regulating briquetting head cooling water temperature - Digital electronic temperature regulator connected to an NTC sensor (probe: diameter 6 × 52 mm, IP68, AISI 316) ADDITIONAL: NOVAPAC packaging machine Optionally available: NOVAPAC packaging machine, fully compatible with Di Più BRIK MB100 and other briquetting machines – the ideal solution for automatic packaging directly after pressing. Year: 2013 Price for Novapac: €19,000 The equipment can be seen in the last 6 pictures.

Condition: ready for operation (used), Year of construction: 2005, spindle bore: 19 mm, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Maximum workpiece length: 200 mm - Spindle speed: 15,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.001° SUB-SPINDLE - Maximum bar diameter: 16 mm Knsdpfxew Rcams Af Sod - Z-axis travel: 80 mm - Spindle speed: 10,000 rpm - Spindle drive power: 1.1 kW - Minimum C-axis resolution: 0.001° TOOL TURRET 1 - Number of stations: 10 - Number of live stations: 4 - Driven tool speed: 6,000 rpm FRONT TOOLING - Number of positions: 4 SUBOPERATION TOOLING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 200 V - Total power consumption: 8 kW WEIGHT AND DIMENSIONS - Required space: 1850 x 1610 mm - Machine height: 1050 mm - Machine weight: 2,050 kg ACCESSORIES - Control unit: Fanuc 31i - Guide bushing - Parts removal - Parts ejector - Coolant tank - Bar feeder: IEMCA BOSS 332r - Electrical transformer

Condition: excellent (used), Year of construction: 2011, Year: 2011 Maximum sheet size: 530 × 740 mm Laminating speed: up to 25 m/min Knjdpfx Afoxtxd Sj Ssd Automatic suction feeder Pneumatic roller pressure Automatic film cutting Compatible with gloss, matt, and soft touch films Short changeover time – ideal for short runs

Condition: good (used), Tecnomac Sprinter 76 Automatic laminating machine The most efficient machine on the market from a legendary manufacturer. It is an advanced machine with high efficiency thanks to an external heating thermostat. Production Italy. Technical data: Max sheet size: 760mm x 1040mm Min sheet size: 210mm x 210mm Min weight: 120 gsm Knjdjxflz Uspfx Af Sod Max grammage: 400gsm Operating temperature: 80-145°C Max working speed: 40m/min Weight: approx. 1800 kg Power supply 380V Additionally, air 8 Bar A steel, chrome-plated cylinder with a large diameter, filled with water for greater operational stability. Pneumatic pressure, separation and automatic feeding. Adjustable pressing force. Feeding from a high stack, Spiess type feeding head Expanding roller for attaching the foil. Sheet straightening module.

Condition: reconditioned (used), Year of construction: 2011, operating hours: 35,612 h, laser power: 3,000 W, Equipment: cooling unit, Rear Beam Loader 6500 mm - Exhaust 6500 mm - Round tube min 12 mm max 140 mm - Square/rectangle tube max 120x120 mm Knsdpfor Iz N Hex Af Sjd