Chipper / Shredder

Balduf PZ 63-1

Condition: used, Machine: Screw conveyor, Screw conveyor Dedpfx Adsrn U H Ho Ijup Type: Askania Maschinenbau GmbH, screw conveyor Model: TSF 315, No. 197 Year of construction: 1999 Mass: 350 kg Rated voltage: 230/400 V/ Connected load: 4 KW Length: 9.40 m Ø auger: 250 mm Material: Steel auger/stainless steel trough

Condition: used, Chipping roundwood: 100-150 m3/h Chipping small waste: 50-100 m3/h Weight: 3165 kg Max log diameter: 254 mm Söderhamn Eriksson 670-56 CC chipper with electric motor. Söderhamn Eriksson 670-56 chipper is intended for the production of chips for pulp, fibreboard and chipboard manufacture. Both roundwood and sawmill waste may be used as raw material. Duodpjhclffefx Ad Isp Chipper 670-56 feed is horizontal, at an angle of 37,5 grades to the grain. The chips, of consistent high quality, may be discharged at the bottom or blown straight upwards. Be one of those woodworking companies that wisely manage the resources available to them.

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min Dedpsfg E Hlefx Ad Ioup table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, Fully refurbished pellet press from Italian manufacturer ZEPI. The main engine power is 315kW, which allows the production of up to 6t/h of wood pellets. The delivery set also includes a ZEPI ZC500 paddle mixer and a ZEPI ZFS250 feed unit. Djdpfevpvp Isx Ad Ioup

Condition: excellent (used), Catalog number 6726 Djdpfx Adsignt Us Isup TECHNICAL DATA - Loading hopper inlet 280x300 mm - Discharge outlet for chipped wood Ø 310 mm - Rotor working width 340 mm - Main motor 22 kW - Number of knives 6 pcs - Dimensions (L/W/H) 1300x1150x1680 mm - Weight 720 kg ADVANTAGES – very good condition – used wood chipper Net price: 19,900 PLN Net price: 4,740 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: new, Year of construction: 2026, functionality: fully functional, Pallet Board Stacker PBS M4 – Automatic Pallet Production Line Stacker Automatic pallet board stacker designed for efficient integration into pallet production lines. Ensures precise board alignment, stable stacking and high production capacity with minimal manual handling. Included equipment: -Control program -Stacker with integrated lift -Board unscrambler -2 spacer dispensers with support frame -Discharge conveyor with lift platform Dedpfohhnblox Ad Ioup -Package lift for easy forklift handling -Suitable for continuous industrial pallet board production.

Condition: new, Technical Data: - Hopper opening: 1850 x 1250 mm - Hopper volume: approx. 3.0 m3 - Rotor diameter: 500 mm - Rotor length: 650 mm - Rotor speed: 80 rpm - PLC control - Motor–gearbox: 18.5 kW - Control cabinet (completely wired) incl. 5 m cable Dujdpjwb Sdqefx Ad Isp - Automatic star-delta start - Weight: 3600 kg - Performance depends on material Main applications and processable materials: - Recycling and volume reduction of non-ferrous metals - Recycling and volume reduction of wood waste - Recycling and volume reduction of plastics and foam / Styrofoam - Recycling and volume reduction of electric cables and coils - Recycling and volume reduction of plastic containers and composite materials

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, type of input current: three-phase, power: 160 kW (217.54 HP), input voltage: 380 V, warranty duration: 12 months, year of last overhaul: 2023, Equipment: documentation/manual, 1 pellet press make: Buhler DPAB inner diameter die 660 mm tread die 138 mm Dusdorah Evopfx Ad Isp Press is equipped with 1 motor 160 KW . Press door is made of Stainless steel with overload valve in door. 2 Roll press with 2 rolls on the press overhauled in dimple or racked version Press is complete with die lifting device and tools The press is completely overhauled and equipped with new bearings and wear parts such as front and rear sliders die washer etc. Also new V-belts Also, all safety devices will be observed and appropriate switches on Friction protection , door switch and inspection hatches will be fitted.

Condition: used, Year of construction: 2003, operating hours: 10,120 h, total length: 1,800 mm, total height: 1,700 mm, total width: 1,200 mm, Empty weight: 1.300 kg Price: On request Shredder Untha LR 630 Year of construction 2003 Input opening: 624 x 792 mm Throughput speed: material and sieve dependent Rotor diameter: 248 mm Rotor speed: 86 - 96 rpm Engine power: 15 kW Cutting system: 17 knives Sieve diameter 24mm Transport dimensions 1800*1200*1700mm (L*W*H), Weight 1300kg - Year: 2003 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: LR632318 - Operating hours: 10120 - Transport dimensions: 1800mm x 1200mm x 1700mm (l x w x h) - Transport weight [kg]: 1300kg Financial information VAT: The price shown is exclusive of VAT Dusdpfxjwh Na Nj Ad Iep VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2026, The Mobile Fruit Processing Line is designed to conveniently accommodate all the machines necessary for juice production and a smooth work process. It contains: -Fruit and vegetable washer elevator mill MAXIMILL 3000 -Belt press POWERPRESS 1500 -Transporter for leftover mash -Stainless steel tanks -Diesel pasteurizer -Semi-automatic Bag in Box filler -Juice filters -Sink with a stainless steel table Capacity: 1500 kg/h. Other available capacities: 400 kg/h, 800 kg/h, 1200 kg/h. Features: -The mobile juice line conveniently contains all the machines required for fruit processing & juice production. -Requires only 1 person to operate the whole line. -Mobility is the biggest advantage which eliminates costs for premises and provides the ability to change location. -The juice yield from apples is ~75 % . -All machines are interconnected and controlled automatically. -The mobile juice production unit includes a Bag in Box filler which fills the juice into both Bag in Box and Stand up Pouch packages. -The mobile juice line can be customized on client’s request. -The line is easy to operate and maintain. -The mobile fruit processing line is installed in a specially made trailer which can be easily opened for work and shut when needed. -The biggest advantage of our Mobile Fruit Processing Line is the ability to produce juice anywhere you like. This way the client avoids additional expenses for premises and gets the ability to change work location. Mobility is the key aspect here which provides the client with more possibilities, such as developing a juice pressing service business at various apple farms or different towns. Duedpfx Adoq Nl Afs Isp