Electric motor 4.5 kW 920 rpm

Balkancar KR 2011-6

Condition: used, Year of construction: 1999, The machine is being offered as a spare parts donor, as the printing rollers in one printing unit are defective. Pgedpfxsy Ef Tao Aphjr Otherwise, the machine is complete.

Condition: excellent (used), Year of construction: 2003, Ref:11066 . 2003 Autobond105 THS. B1, single sided, fully automatic thermal laminator. Excellent condition run less than 1.5 million sheets! Equipped with; Heidelberg deep pile suction feeder with back separation 250mm (10) diameter highly polished chrome laminating roller Laminating nip pressure up to 6 metric tonnes Film is mounted on a quick change air shaft Trim slitter and perforating mechanism Pneumatic clutch ensures precise film tension Swiss made temperature control unit Sheeter - Integral bump roller separator with anti-curl bar Pallet delivery table. Accessories: Ioniser Pro static eliminator. Specification: Sheet size Max: 105 cm (40”) x 76 cm (30”) Min: A4 Paper weight 90 gsm (80lb) - 650 gsm (24 PT) Film Range - 8 micron virgin & 24 micron (1 mil) to 75 micron (3 mil) thermal Pgsdpjydnxnjfx Aphor Top speed 45m (150') per minute with rising pile feeder.

Condition: excellent (used), Year of construction: 2013, operating hours: 4,200 h, Xeikon Laser , for BasysPrint -860 /750 -405 nm UV - approx 4200 hours Pjdpfx Apop Nihajhegr -Top condition

Condition: used, Year of construction: 2000, functionality: unexamined, machine/vehicle number: EE425200, paper weight (max.): 400 g/m², paper width (max.): 720 mm, paper height (max.): 520 mm, input voltage: 380 V, Purchased in working condition and transferred to our warehouse. It is currently not in working condition. Ink and water rollers need to be replaced soon. Simultaneous front and back printing is possible. Very suitable for book printing. Podpfx Aey Emmzjphegr

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, working width: 760 mm, Mamy przyjemność zaoferować Państwu profesjonalny laminator termiczny ECOSYSTEM COMPACT 76, idealny do zastosowań przemysłowych w zakresie uszlachetniania druku. Urządzenie zostało zaprojektowane z myślą o wysokiej wydajności, niezawodności i precyzji laminacji różnorodnych materiałów. DANE TECHNICZNE • Maks. format arkusza (szer. x dł.): 760 x 1060 mm • Minimalny format arkusza: 210 x 250 mm • Maks. prędkość mechaniczna: 60 m/min* • Wydajność podajnika: do 10 000 arkuszy/godz.* • Gramatura papieru: 115 – 600 g/m² • Maks. szerokość folii: 750 mm • Średnica rolki z folią (maks.): 350 mm • Średnica wewnętrzna rolki z folią: 3” • Wysokość robocza (z paletą): 900 mm • Maks. waga stosu (z paletą): 750 kg *Wydajność zależna od materiałów i doświadczenia operatora. ZASILANIE I INSTALACJE TECHNICZNE • Zasilanie: 400 V, 3-fazowe + PE, 50 Hz • Moc zainstalowana: 31 kW • Sprężone powietrze: 700–900 nl/min przy 8 bar (Sprężarka nie wchodzi w zakres dostawy.) ZESTAW ZAWIERA • Automatyczny podajnik z elektronicznie sterowanym stołem ssącym (system PIAB) • Odwijak folii z przycinaniem bezpośrednim • Zespół laminujący z chromowanym kalandrem i gumowym wałkiem dociskowym Podpfxsypd Sze Aphegr • Zewnętrzny podgrzewacz wody z armaturą i zaworami • Grupa separacyjna z systemem nacinania folii • Gorący nóż z laserem korekcyjnym Scatec – do cięcia folii metalizowanych PET, nylonowych, tłoczonych i specjalnych. Opis funkcji: System gorącego noża umożliwia precyzyjne i czyste oddzielenie folii od krawędzi arkusza po laminacji, niezależnie od rodzaju materiału. Zintegrowany laser korekcyjny Scatec odpowiada za bieżącą kontrolę położenia arkusza oraz automatyczne dostosowanie pozycji cięcia, co zapewnia idealne wyrównanie folii względem krawędzi druku. To rozwiązanie minimalizuje błędy i zwiększa powtarzalność procesu, nawet przy dużych prędkościach produkcyjnych. • Automatyczna sztaplarka • Panel dotykowy sterowania • System zdalnej pomocy (Ethernet – po stronie klienta) • Instrukcja obsługi zgodna z normami CE • Zapasowa rolka dociskowa z łożyskami i specjalnym wózkiem

Condition: reconditioned (used), Year of construction: 1998, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 067-1045 from 1998 first owner, color channels: 2 kleuren rechtdoor, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 100 mm, paper height (max.): 365 mm, total length: 2,765 mm, total width: 1,523 mm, total height: 1,560 mm, space requirement length: 2,765 mm, space requirement width: 1,523 mm, space requirement height: 1,560 mm, type of input current: three-phase, input current: 20 A, input voltage: 200 V, Equipment: documentation/manual, In contrast to the previous offer, the machine has been thoroughly cleaned and inspected. Several replacements and repairs have been carried out, including new timing chains, a new drive chain for the feeder, replacement of some idler rollers, and all grippers on all drums have been made of stainless steel and are now functioning smoothly, ensuring excellent register. The rollers are rated approximately 7 out of 10; they are slightly glazed and close to their minimum dimensions, but a period of approximately 1500 to 2500 hours should still be manageable without any significant issues, which is what has been promised! 2-color offset press with high-quality construction, featuring hardened and ground gears, cylinders running in class P5 preloaded tapered roller bearings (sets of 2), and lubricated via oil bath and pressure lubrication. Pgjdpfx Ajv Nv Tajpher B3 format (35x50 cm) in a conventional standard configuration (no autoplate or cocking), but with an alcohol dampening system with large rollers based on the SM52 design, producing excellent print quality. From the original owner who did not maintain the machine properly (cosmetically); however, a comprehensive maintenance history is available, performed by the importer. The latest meter reading in the history is 11.6 million impressions from 2003. Due to illness and outsourcing, the previous owner, a printing broker, has hardly used the machine since then. NEXT STEPS: We will check the machine against the current meter reading and ensure correct and reliable operation. C)2 dry ice cleaning is being considered, as is a complete overhaul of the machine, as the mechanical condition is exceptionally good. However, this would increase the cost, so the machine is currently offered in its current condition, "as is", EXW our warehouse in Son, NL (5,500,- EXW, NOW after refurbishment €7,500,- EXW van Rooij). Any type of inspection is, of course, permitted. We guarantee that the machine is free from cracks, cylinder damage and/or repairs, and that the gears are free from damage. The rubber rollers are glazed and need to be replaced. The Royce ECO circulating pump and cooling system for the dampening unit shows signs of corrosion. Some specifications, for all specifications, open the PDF at the bottom of this page. Maximum printing speed 12,000 sheets per hour Maximum paper size 365 x 520 mm Minimum paper size 100 x 148 mm or 148 x 100 mm Maximum printing area 350 x 510 mm Rubber blanket size 500 x 520 x 1.9 mm Plate size 400 - 410 x 510 mm Dampening roller in this case for film dampening is 1 (62mm) Number of ink rollers 4 pieces of 46, 48, 52 and 54 mm Feeder stack height maximum 850 mm Delivery stack height max 360 mm Electrical connection 3 phases 200 VAC 50HZ (primary), but there is a transformer for conversion from 3 x 415/400/380/230 VAC to 200VAC Total power consumption 7kW Primary fuse rating at least 20A Dimensions LxWxH = 2765 x 1523 x 1560 mm Net weight 4000 kg

Condition: ready for operation (used), Year of construction: 2005, The Wohlenberg 76 (2005 model) is a robust, high-precision industrial paper guillotine designed for cutting paper, cardboard, plastic, foil, and leather. Pgodpfx Apozavlbshjr Technical SpecificationsMaximum Cutting Width: 760 mm (29.9 inches)Maximum Feeding Depth: 760 mmMaximum Clamp Opening (Stack Height): 110 mmTable Height: 870 mmBackgauge / Saddle Speed: 30 cm/sTotal Machine Weight: Approximately 1,200 kg to 1,650 kg (depending on specific table configurations)Electrical Requirements: 3-Phase, 380V, 50 HzKey Operational FeaturesControl Interface: Equipped with an LCD color display and an alphanumeric keypad supporting multiple languages.Automation: Features a built-in autoprogrammer capable of storing up to 1,500 custom cutting programs. Data Integration: Table Setup: Chromed central air table complemented by chromed side air tables for easy stock manipulation.Hydraulics: Adjustable hydraulic pressure clamping to match the density of varying materials.Safety EquipmentInfrared Safety Grids: Light beam guarding system protects the operator during the cutting cycle.Two-Hand Control: Requires simultaneous two-handed engagement to activate the knife safety sequence.Mechanical Safety: Includes rear table guarding and a physical pressure bar.

Condition: excellent (used), Year of construction: 2014, load capacity: 400 kg, arm reach: 2,550 mm, IRB 7600 is ideal for heavy applications, regardless of industry. Typical uses include handling heavy fixtures and parts, turning car bodies, lifting engines, in foundries or forges, and loading and unloading machine cells. It can also be used to lift large, heavy pallet layers. Characteristics such as high available torque and inertia capability, rigid design, and powerful acceleration have earned this market leader its “Power Robot” title. Podpfx Aoq Ap Dwjphegr Year: 2014 Payload: 400 kg Reach: 2550 mm Type: Foundry Plus Working hours: 38982 Condition: Used & Tested Cabinet: M2004 Teach Pendant: Included Signalling & Power Cables: Included Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. Please note that the price does not include shipping costs. (Source: ABB's Website)

Condition: used, Manuelle Nut- und Perforationsmaschine / manuall Creasing and Perforation machine Pgsdszbarzjpfx Aphsr Nut- und Perforationsmaschine / Creasing and Perforation machine Pernuma 1470H Serial-No. 3473 Arbeitsbreite / Working width max. 500mm Inklusive Nut- und Perforationswerkzeug / Include Creasing and Perforation tools Handbetrieb - Manuell Operation   Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KR 112, 2/6./S -Power: 2.2kW -Speed: 940 rpm -Shaft: Ø 28 x 60 mm -Protection class: IP44 -Dimensions: 390/230/H255 mm Pedpjibd S Hofx Aphogr -Weight: 41 kg