Gear motor 0.37 kW 56 rpm

Bauer DK740/178

Condition: used, Gear motor, electric motor -Speed: 85 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Price: per piece Ltjdpsc U Ty Sjfx Aanoa -Number: 1x available -Dimensions: 410/200/H205 mm -Weight: 17.4 kg

Year of construction: 2016, condition: new, 1 piece reconditioned unused industrial bevel helical gearbox from ASUG. TGL 21815 All parts of the gearbox are renewed, except the housing !!! Ltodpjgwlrdofx Aanea Claw coupling: 800 mm (only one half available) Maximum torque: 27.829 Nm Gear ratio: i= 1:80 max. power: 51 kW oil filling: 170 kg Speed: n1= 1400 Speed: n2= 17,5 weight: 1450 Kg Shaft diameter d1: 65mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Total height h2: 925mm Length from base: 1170 mm !! Gearbox has no oil cooler !

Condition: used, adjustable gear motor, variable speed gear motor, electric motor Ltsdpfec U Rh Rjx Aanea -Motor manufacturer: Bauer -Gear manufacturer: Bauer -Motor power: 0.37 kW -Speed: 46 rpm -Construction: B3 -Drive shaft: Ø 20 mm -Protection class: IP 54 -Dimensions: 385/200/H195 mm -Weight: 18 kg

Condition: good (used), gear motor, electric motor, electric gear motor -Speed: 29.5 rpm -Power: 0.075 kW -Design: B3 -Shaft diameter: 20 mm -Protection class: IP 54 -Price: per piece -Number: 3x available -Dimensions: 380/200/H210 mm Ltodpfxeclnkke Aansa -Weight: 19 kg

Condition: ready for operation (used), Year of construction: 1995, Mostana 1M63 x 3000mm Gap Bed Centre Lathe Max’ distance between centres 3000mm Max’ swing Over Bed 700mm Max; swing over cross silde 350mm Max’ swing in gap 900mm Spindle Bore 105mm Lodpfxewf Sfve Aanota Spindle Speeds 10-1250 rpm Spindle Motor 15kW Cross slide travel 400mm Year 1995 Machine complete with: Sony LH70 2 axis Digital Readout Interlocking chuck guard Taper turning through compound slide 500mm 4 jaw chuck 390mm 3 Point fixed steady Rapid power traverse 4 way tool post Change gears coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78739 Machine Serial Number: 1688 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Gear motor, electric motor, electric gear motor Ltjdpfjc U Hgnox Aanea -Speed: 42 rpm -Power: 0.075 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 380/210/H200 mm -Weight: 18.1 kg

Condition: used, Gear motor, electric motor, electric gear motor -Speed: 315 rpm -Power: 0.075 kW -Construction: B3 Ltsdpfxscncq Re Aansa -Diameter shaft: 20 mm -Protection class: IP 54 -Price: per piece -Number: 3x available -Dimensions: 380/200/H210 mm -Weight: 19 kg

Condition: new, We buy electric motors. Ltodpfeq T Nxfex Aansa Offer us your goods using pictures or lists.

Condition: ready for operation (used), Components to build a very large energy waterwheel. Gearbox: Shaft-mounted gearbox Flender SFO 500 Number of gear stages: 4 Transmission ratio: 185,63 : 1 Transmittable torque: 131.300 Nm Speed n1 max.: 1485 rpm Speed n2: 8 rpm Shaft diameter D1: 80 mm Shaft diameter D2: 220 mm 3500 kg without electric motor Dimensions: Length: 2000mm width: 800 mm height: 1000 mm Ltjdpfx Aoh Rrtnoanja To the shaft / tube Shaft diameter: 560 mm Tube wall thickness: 35 mm Bearing distance: 10000 mm Shaft can be shortened as desired due to the screwed hubs. Welding is possible without problems on the tube because it has a wall thickness of 35 mm.

Condition: used, machine/vehicle number: 12195, Inlet: 600 x 600 mm Ledpohvkdfefx Aaneta Drive: 2 x 37 kW