Deloading Systems

Baumann BA 7

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, Fully overhauled Cedpfxoriui To Afpspu

Year of construction: 2006, condition: good (used), Agfa chiller (cooling system) for Agfa and screen CTP systems. Inspected and tested. Cpodpfedtr A Tjx Afpju

Condition: used, Hi we can offer KBA 142-6-LV year 1994 Codowqz Drspfx Afpopu Varnishing tower after 5th units, Baldwin cooling device Blanket Weko T 77 Spray powder Non-stop feed and delivery Plate bender IR and hot air dryer in delivery CX device for cardboard without compressor Semi-automatic plate change Delta system on Varidamp

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: Cpjdpfxeg Ezare Afpou 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: used, Year of construction: 1988, BOBST Printing Machine with 4 bottom colors anilox cilinders 120l/cm and 80l/cm TRANSFER BOBST FLATBED DIE CUTTER BOBST AUTOPLATINE SPO 1600, max format 1100 mm x 1600 mm / 43.3" x 63" with 4 Bottom Printing unit and transfer Bobst * Vacuum feeder * Die cutting section * Waste elimination section * Centerline II * High pile delivery with two lifting tables * Max sheet format: 1100 mm x 1600 mm / 43.3" x 63" * Min sheet format: 520mm x 600mm / 20.5" x 23.6" * Cutting force: 400 t * Materials: E, B, C, CB, BE flutes * Max speed: 6,000 sheets/hour Csdpev Ifpuofx Afpjpu Possibility to sell them separately

Condition: good (used), Year of construction: 1987, functionality: fully functional, Bobst SP 142 ER Year 1987 Max. Size: 1020x1420 mm Min. size: 700x520 mm Max. Speed: 6000 Sh/h Max. Cutting force: 600 T Centerline Micrometer setting Cpedpfxjvhcgqo Afpsu in production

Condition: excellent (used), Year of construction: 2019, Ref: 10965 . 2019 Horizon HT-1000V Variable Trimmer ONLY 1.7M books trimmed! Inline or offline variable three-knife trimmer capable of zero make-ready on book trim size and thickness changes. Perfect for short run production, and book of one production which can be achieved through barcode driven set-up. Features: Setup automatically on the fly by reading a barcode at the entrance of the trimmer. Also capable of automatic set-up from the operator panel for same size production runs. One-to-one book production with variable sizes can be produced. Both untrimmed and trimmed sizes can be variable, for true variable format production. Can be used solo or placed in-line with Horizon perfect binders. Specification: Untrimmed Book Size: Max. Spine Length 350 x Fore-edge Length 320 mm/ 13.780” x 12.600” Limitation: Maximum length from the center to top or bottom is 175 mm/ 6.889”. Min. Spine Length 148 x Fore-edge Length 105 mm/ 5.825” x 4.130” Limitation: The minimum length from the center to top or bottom is 74 mm/ 2.91”. Trim Width: Fore-edge: Max. 110 mm/ 4.330” Min. 1 mm/ 0.04” Top and bottom: Max. 80 mm/ 3.150” Min. 1 mm/ 0.04” Trim Height: 1 to 65 mm/ 0.04” to 2.560” Cjdpfjwu Sptox Afpjpu Production Speed: 400 to 1,000 cycles per hour (Higher production can be reached with piled books)

Year of construction: 2025, condition: new, The RS-9 shredder has been specially designed for effective processing of various types of papers, taking into account the specifications of the punching machine it will cooperate with. The shredder enables the quick and safe shredding of paper directly received from the die-cutting machine for easy transport via a conveyor system to the baler. Cpedpoiklxbsfx Afpsu Our machine is not only easy to operate but also economical to maintain. It features advanced Siemens control that protects against overload. Additionally, the frequency converter ensures smooth start-up and precise motor control. We also design waste disposal systems from multiple punching machines to one shredder, allowing for fast and maintenance-free material packing into a baler. Feel free to contact us.

Condition: good (used), Wohlenberg 132 TS Paper Cutting Machine Csdpfew D E Saox Afpspu Machine in very good condition, ready for production. Year of manufacture 2008. Available immediately from stock. The guillotine can be used as a stand-alone unit or integrated with cutting systems. Program generation takes place in the menu and includes various cutting tasks, e.g. Single cut, Programming, Multiple cut, Non-cutting pressure, Automatic actual value transfer. Premium class cutting machines from the Wohlenberg brand are manufactured in Germany in Solms. Distinguishing features of the Wohlenberg machine: – Interactive user interface – 18.4” touch screen – MIS integration (optional) – USB interface – Ethernet interface – Windows CE operating system – CIP data module – Positioning via electronic handwheel – Optimized cutting cycle – Programmable hold-down pressure – Automatic adjustment of the hold-down pressure to the cutting width – Automated knife change from the front – Quick knife change – New machine body cast in one piece = higher stability – Maintenance-free electromagnetic clutch Technical data: Cutting length: 1320 mm Maximum stack height: 165 mm Infeed depth: 1325 mm Smallest cut with sheet metal under the pressure beam: 77 mm Smallest cut without sheet metal under the pressure beam: 20 mm Maximum saddle feed speed: 300 mm/s Maximum mechanical efficiency of the knife: 44 cycles/min Saddle guidance: above the work table Main engine power: 4.5kW Net weight: 3410 kg The machine is equipped with a spare knife, sticks, a pressure plate, documentation, tools.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, overall weight: 52,000 kg, punching force: 600 t, space requirement height: 3,520 mm, space requirement length: 12,150 mm, space requirement width: 9,340 mm, Machine for punching, embossing, waste stripping and blanking Used machine, overhauled at the QTM Schwalmtal plant System equipped with high-performance sheet feeder for NON-STOP operation ⦁ For fully automatic punching, creasing and embossing with or without gripper edge ⦁ for stripping the inner waste as well as the side and rear sheet edges Cpjdet E Nthspfx Afpsu ⦁ for stacking the punched and stripped sheets with the attached gripper edges or the attached gripper edges or ⦁ for cutting off the gripper edges and then depositing the remaining sheets in stacks remaining sheets ⦁ with a patented gripper carriage register system for maximum register accuracy ⦁ with a bundle stacking machine that features a fully automatic separating sheet feeder and NON-STOP delivery and does not need to be converted even for the smallest blanks. changeover even the smallest cuts. (Shuttle table with comb structure) ⦁ Cut-off sheet magazine with electrical stock control, during production refillable during production ⦁ with Centerline equipment ⦁ with automatic pallet changing device in the storage area ⦁ Modem ⦁ Standard elevation of the machine 600 mm Specification Sheet format max. 1060 x 1450 mm Sheet format min. 500 x 700 mm Maximum punching force 6.0 MN (600t) Speed 8,000 Bg / h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/ Corrugated cardboard up to 5 mm (max. sheet curvature 4 %) Features: patented QTM rail system manual non-stop feeder stripping station depaneling station Centerline Fully automatic pallet changing device Deposit incl. platform Upgrade of the control system to Siemens S7 Completely overhauled machine drive Quick-clamping frame in all tool stations