Agfa chiller

Agfa

Condition: used, Year of construction: 2018, only approx.16K plates done Format 830 x 660 mm Apogee Workflow RIP Inlinepunch Azura C95 Clean out unit Itsdpfx Abjyt I Unsced Stacker ST 95EX Available: at short term

Year of construction: 2012, condition: excellent (used), Agfa C95 washout station -good condition Iodpfx Aboirnmcjcstd

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: 3.324287, • Large format printer with solvent ink • Solvent based ink: 6 colors (4CMYK+2CM light) • Printing width: 3.2 M (3200 mm) • 24 high-performance Spectra piezoelectric printheads • 600 dpi (2-sided printing) • Max. roll weight up to 230 KG • Up to 64 m2 / h Itjdpfx Abewh Shcjcod • Jeti software RIP (E9YC4000) Equipment / additional information: • Carrier rewind unit: Jeti 3M Solvent (E9WF2000) • Retro Heater Unit (E9ZZL000) • Jeti Spectra head 24 SL PH 3324 (E91UE000) • Vinyl Loader (E9WKB000) • Vinyl Roller Assy (E9ZUA000) • Spare parts kit for Jeti 3324 (E9V4C000) • Backlit camera (E9Z2P) • Complete set of new filters (12 pieces) • 10 meters of new hoses also included • Three sets of new connectors • Original cleaning device for the ink system of the machine Including EXHAUST HOOD over the whole machine

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: 2525797057901, • CMYK + Lc Lm + 2 x White • White in the pre- and postprint • Speeds up to 45 m²/hr. (500 ft²/hr) • Max. print size 2,54 x 1,54 m • Substrates up to 4,5 cm (1.77 in) thick. • Multiple board printing • Borderless printing • Shuttle safety sensors • For Digital Printers, Poster printers Iodjwh Si Hjpfx Abcjtd and Mid-Size Graphic Screen Printers

Condition: used, Year of construction: 1988, BOBST Printing Machine with 4 bottom colors anilox cilinders 120l/cm and 80l/cm TRANSFER BOBST FLATBED DIE CUTTER BOBST AUTOPLATINE SPO 1600, max format 1100 mm x 1600 mm / 43.3" x 63" Iedov Ifpuepfx Abcotd with 4 Bottom Printing unit and transfer Bobst * Vacuum feeder * Die cutting section * Waste elimination section * Centerline II * High pile delivery with two lifting tables * Max sheet format: 1100 mm x 1600 mm / 43.3" x 63" * Min sheet format: 520mm x 600mm / 20.5" x 23.6" * Cutting force: 400 t * Materials: E, B, C, CB, BE flutes * Max speed: 6,000 sheets/hour Possibility to sell them separately

Condition: used, Year of construction: 2014, functionality: fully functional, color channels: CMYKLcLmW, number of print heads: 6, resolution (max.): 1,440 dpi, paper width (max.): 2,050 mm, Equipment: raster image processor, AGFA Anapurna m2050 – UV Digital Large Format Printer The price listed is net (excluding VAT) Condition: Used, fully functional, currently in continuous operation Manufacturer: AGFA Model: Anapurna M2050 Type: UV digital printer (suitable for various rigid substrates and roll media) Maximum print width: up to 2050 mm Year of manufacture: 2014 Ink type: UV Color configuration: CMYKLcLmW CMYKLcLm in very good condition; W (white) print head has not been used. Media transport: Conveyor belt + vacuum table Control system: PC with Asanti/RIP software Additional equipment included: Set of extension tables The machine works flawlessly, ready for immediate operation, and is in active production. Testing before purchase is possible. Iodpfxox S Rpyj Abcjtd Key features of the Agfa Anapurna M2050: Ihsc R D T Tsx S Rpyeprou - UV ink technology: Ensures fast drying and outstanding print durability. - Performance: Up to 53 m²/h in express mode. - Print quality: High print resolution, capable of reproducing fine details. Ideal for use in packaging production, display graphics, signmaking, photo labs, and all applications requiring high-quality large-format printing.

Condition: used, Year of construction: 1995, machine/vehicle number: 4501, Filmentwicklungsmaschine / Film develope machine AGFA RapiFlex 51     Baujahr / Year 1995 - Serial-No. 4501DD382942 Arbeitsbreite / Size max. width 510mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Itjdsupy S Aepfx Abced Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2009, condition: excellent (used), machine/vehicle number: 104/1656, Size 60 x 75 cm, only for turning (without airing), with fixed control desk Itodpfx Ajhqhcijbcjd Machine nr: 104/1656

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Screen PT-R4600 E/ Avalon N4-30 E S/N 462xxx, 16 Fiber coupled ciodes, Plate count 10.792 Exposure time 1.045h Screen Blackbox Network Interface EP-B101 Ijdpfx Aboxlf Rvocstd RIP on request. All offers subject to prior sale

Condition: ready for operation (used), Year of construction: 2017, An Agfa UV-LED hybrid large format printer including a roll-to-roll unit is available. Printing technology: UN-LED inkjet, max. print width: 2540mm, resolution: 1200dpi, print colors: CMYKLcLm+white+primer, max. print speed: 275m²/h, substrate type: rigid/flexible, max. substrate thickness: 50mm. Documentation available. On-site inspection is possible. Iedoww Iu Repfx Abcstd

Condition: excellent (used), Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25.05.004, total length: 9,500 mm, total width: 2,250 mm, total height: 2,300 mm, input voltage: 380 V, power: 50 kW (67.98 HP), overall weight: 21,000 kg, empty load weight: 18,000 kg, compressed air connection: 7 bar, Equipment: documentation/manual, Paper size: 730 x 1060 mm, printing area: 710 x 1040 mm Paper thickness: 0.05 mm – 0.5 mm Preset maximum speed (due to simulation of the throw-off time for high-speed presses) is 4,000 sheets per hour, but the machine can operate much faster for commercial jobs. Four-fold central impression cylinder that prints all 4 colors in one gripper closure. 1988 FAG Speedproof with operator console for ink duct and cylinder adjustments, enabling extremely accurate register printing. Attached is the original factory brochure. The machine has been fully dry ice cleaned, and the cylinders are in excellent condition. Offered strictly on an 'as is, where is' basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is absolutely fixed, based on the removal of easily separated parts which we could sell separately, such as the Mabeg feeder with vacuum belt delivery, and the four-fold Baldwin stainless steel unit—with each color having its own bath, a mixer, and adjustable temperature control, so all four baths can be set to different temperatures and alcohol concentrations. The machine was dry ice cleaned, and it was intended for prominent use in printing electronic paper. However, due to too many initial losses, the project was discontinued. Isdeuf Sy Ajpfx Abcstd The machine has been with us for 3 years and, due to its size, I want to sell it as quickly as possible. Hence this very low price. It is an excellent machine. If the machine needs to be set up for testing and sampling, this is possible at an additional cost of €10,000, of which €5,000 must be paid in advance as a deposit under agreed conditions. All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lbs) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, number of ink cartridges: 8, color channels: 6 colors, white + primer, number of print heads: 15, resolution (max.): 1,200 dpi, paper width (max.): 2,690 mm, We offer this machine in very good condition: Agfa Jeti Mira MG2732 UV digital printing machine, year of manufacture 2016. For questions or if you require additional information, please send us a message or contact us by phone. Flatbed table: 2.7m x 3.2m Roll-to-roll system, as a mobile module 6 colors, white + primer High quality: 1000x1200 dpi High productivity, up to 206 m2/h Prints with original inks Serviced by AGFA Rigid materials: Maximum width: 2.69 m Maximum length: 3.20 m Material thickness up to 50 mm Ijdsyfrddspfx Abcstd Flexible materials: Maximum width: 2.05 m Thickness up to 3 mm Despite its age, the machine still prints correctly and is in continuous production use. We invite you for tests.

Condition: good (used), Xcalibur 45s Elite with new laser, old laser is also still available. Isdpfxsxcurqe Abcjtd

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, overall weight: 52,000 kg, punching force: 600 t, space requirement height: 3,520 mm, space requirement length: 12,150 mm, space requirement width: 9,340 mm, Machine for punching, embossing, waste stripping and blanking Used machine, overhauled at the QTM Schwalmtal plant System equipped with high-performance sheet feeder for NON-STOP operation ⦁ For fully automatic punching, creasing and embossing with or without gripper edge ⦁ for stripping the inner waste as well as the side and rear sheet edges Itodpfx Abjt E Nthscod ⦁ for stacking the punched and stripped sheets with the attached gripper edges or the attached gripper edges or ⦁ for cutting off the gripper edges and then depositing the remaining sheets in stacks remaining sheets ⦁ with a patented gripper carriage register system for maximum register accuracy ⦁ with a bundle stacking machine that features a fully automatic separating sheet feeder and NON-STOP delivery and does not need to be converted even for the smallest blanks. changeover even the smallest cuts. (Shuttle table with comb structure) ⦁ Cut-off sheet magazine with electrical stock control, during production refillable during production ⦁ with Centerline equipment ⦁ with automatic pallet changing device in the storage area ⦁ Modem ⦁ Standard elevation of the machine 600 mm Specification Sheet format max. 1060 x 1450 mm Sheet format min. 500 x 700 mm Maximum punching force 6.0 MN (600t) Speed 8,000 Bg / h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/ Corrugated cardboard up to 5 mm (max. sheet curvature 4 %) Features: patented QTM rail system manual non-stop feeder stripping station depaneling station Centerline Fully automatic pallet changing device Deposit incl. platform Upgrade of the control system to Siemens S7 Completely overhauled machine drive Quick-clamping frame in all tool stations

Condition: excellent (used), Year of construction: 2019, Agfa plate stacker including: • For 1500 mm plates • Plate trolley Iodpfx Abewbqgkocjtd