BEFARD XM 800 MINI TRACKED CRANE

BEFARD XM 800.2

Condition: new, Year of construction: 2026, BEFARD XM800.2 MINI CRANE Rjdsv I Sk Sjpfx Adrjt Max. lifting capacity 990 kg Vertical reach max. 6.85 m - available model with a lifting capacity of 800 kg - lower price Standard equipment: • full remote control - both operation and travel of the device • two hydraulic extensions with a maximum vertical range of over 4.5 m • power supply by a combustion engine + 230 V electric engine (optional lithium-ion batteries) - available version only with a combustion engine - lower price • hydraulic support feet • 50-degree rotating column • two operating modes - fast and slow • non-marking tracks • extendable chassis (in the range of 78 cm to 110 cm) • possibility of simultaneous operation from a 230 V network and battery charging (for the Li-ion version) • anti-overload system • manual JIB arm (manual fly JIB) working in 4 positions - 2 pcs • searching hook working in 6 positions Additional, optional equipment • Hydraulic winch 500 kg • Extension of the loading platform by 500 mm • Platform for the operator to stand on • Ramps • LED work lights • Holder for the XP glass grab mounted on the platform Own weight - approx. 1100 kg Gasoline engine - VANGUARD brand 10 HP / 5.5 KW Available in the selected color.

Year of construction: 2002, condition: good (used), functionality: fully functional, Drum dryer for wood sawdust and chips with capacity up to 15t/h. Rsdpfxsvx S Hnj Adrjt Condition - fully functional.

Condition: new, Straightening press 150 tons with electric motor and additional manual operation by a hand lever pump, especially for fine work. Versions: Rsdjf Sqckepfx Adrjt 30t 60t 100t 150t 200t ᐳ 200 t: on request Special machines: on request New machine! We are also happy to build a customer-specific press for you. High quality hydraulic workshop press with 150 tons maximum pressing force. The press can also be opened and closed in the classic electric mode using a lever. For fine work (e.g. pressing in bearings, straightening, ...) the press also has a hand pump. This allows you to fine-tune the force manually. The printing cylinder is attached to a sliding carriage so that the cylinder can be moved sideways. In this way, you can make optimal use of the maximum stand passage width. Particularities: - 150 tons maximum pressing force - Pressure display with manometer - 2 operating modes: electrical operation or or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - adjustable passage height - Pull chains for easy adjustment of the passage height - massive machine frame - cylinder laterally adjustable (mounted on sliding carriage) The press can be tested under power on site. ----- Numerous other workshop presses in different designs, sizes and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please just contact us, we will be happy to advise you without obligation. The stated price is net plus 19% VAT. All statements without guarantee! Europe-wide delivery possible! ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded.

Condition: good (used), Year of construction: 2007, DRILLING MACHINE Operating range V630/1000M Min. / max. height 10 – 450 mm Min. / max. width 60 – 1.050 mm Max. positioning weight 9.000 kg Number of drilling units 3x Rodovpafyspfx Adrot Automatic tool changer 3x (3x 5 positions) Height measuring Included Width measuring Included Machine weight 12.000 kg Roller feed measuring system Max. speed 42 m/min Min. infeed length 1.500 mm Drilling unit VD40 Feed and positioning servo-motors with servo-invertors Spindle rpm Stepless 100 – 2.500 rpm (servo-motors) Lubrication Internal by mist of air / oil Holder SK 40 Drill diameter oil-tube-drills 8 – 40 mm Drill diameter carbide drills 13 – 32 mm Thread tapping M8 – M24 Centre point marking possibility Yes, 3 sides SAWING MACHINE Sawing machine VB1050 Capacity (h x w) 0° 500 x 1.130 mm Capacity (h x w) +/- 15° 500 x 1.060 mm Capacity (h x w) +/- 30° 500 x 925 mm Capacity (h x w) +/- 45° 500 x 725 mm Capacity (h x w) +/- 60° 500 x 470 mm Saw band speed stepless 40 – 120 m / min Saw drive motor 7,5 kW Saw band dimensions 9.550 x 54 x 1,6 mm Hydraulic band tension 48.000 N Machine weight +/- 8.500 kg

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material Redod Iipmspfx Adrot 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens

Condition: used, Year of construction: 2015, operating hours: 2,485 h, machine/vehicle number: 0300212166, axle configuration: 4x4, fuel type: diesel, Equipment: all wheel drive, Drive: Wheel Empty weight: 10.850 kg Mast: articulated arm Lifting capacity: 230 kg Working height: 2.050 cm Max. horizontal reach: 1210 m Rsdpfx Adetr Itbsrjt Transport dimensions (LxWxH): 8.55x2.45x2.85 Please contact PFEIFER GROUP for more information

Condition: excellent (used), color: white, lifting height: 34,000 mm, first registration: 08/2013, mast type: telescopic, Year of construction: 2013, Drive: Wheel Unladen weight: 3,350 kg Payload: 150 kg Gross weight: 3,500 kg Lifting capacity: 4,000 kg Body manufacturer: BOCKER AHK 34/1800 ASSEMBLY CRANE/CRANE/GRUA/CRANE CE marking: yes Technical condition: very good Rsdpfx Aoyiulxjdrst Optical condition: very good BOCKER AHK34/1800 ASSEMBLY CRANE ALUMINIUM TRAILER, RADIO REMOTE CONTROL ALUMINIUM ASSEMBLY CRANE WORKING HEIGHT: 34 METRES MAX. LIFT: 1,800 KG GERMAN DOCUMENTS THE TRAILER IS IN VERY GOOD CONDITION

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: XZ 10480, rotational speed (max.): 3,500 rpm, Machine in working progress / 400 FCRO 32 mm / Redpjw Iwaijfx Adrot Sawing machine for the foam industry, Type Panda 400, M80, 1.9 kW, Year of manufacture 2014, Saw blade 400 mm, Total dimensions 1155 x 100 x 140 cm (with roller tables), Dimensions without roller tables: 71 x 100 x 140 cm.

Condition: excellent (used), color: green, lifting height: 36,000 mm, first registration: 12/2020, Year of construction: 2020, operating hours: 250 h, Drive: Wheel Gross vehicle weight: 3,500 kg Lifting capacity: 2,400 kg Body brand: BOCKER AHK 36/2400 ASSEMBLY CRANE / CRANE CE marking: yes Technical condition: very good Visual condition: very good Redpfxoywvpvs Adrjt BOCKER AHK36/2400 ALUMINIUM ASSEMBLY CRANE TRAILER WITH RADIO REMOTE CONTROL ALUMINIUM CRANE ASSEMBLY CRANE WORKING HEIGHT 36 METERS MAX. LIFTING CAPACITY 2,400 KG 250 OPERATING HOURS!!!! THE TRAILER IS IN GOOD CONDITION

Condition: good (used), Year of construction: 1994, functionality: fully functional, power: 75 kW (101.97 HP), Low-speed rotor with push floor Rsdjtgqlyjpfx Adrjt Rotor width 2500 mm Rotor diameter approx. 400 mm Motor 75 kw Discharge via conveyor belt with magnetic roller