Horizontal band saw

BEHRINGER HBE320-523

Condition: excellent (used), Year of construction: 2019, HD-SFVO 412-S HBE 320/523 G- YEAR 2019. Marking-drilling-milling-shearing & sawing line HD-SFVO 412-S DRILLING CAPACITY. Flat bars: 50x10 to 400x30 Angles: 50x50x5 to 250x250x20 IPN-IPE: 80 to 400 HEA-HEB: 100 to 400 UPN-UPE: 80 to 400 Square and rectangular tubes: 50x50 to 300x300x20 HBE 320/523 G SAWING MACHINE. Effective cross-section (mm): 90°: 400x300 Bevel cut, left pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 330x300 30°: 200x300 Bevel cut, right pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 310x300 Power supply: • Three-phase 400V ± 15 V + ground, 50Hz • Installed power: 40 kVA Compressed air: • Minimum pressure: 6 bar • Maximum flow rate: 3 Nm³/h Operating temperatures: • From 10°C to 40°C Milling unit specially designed for machining small square or rectangular tubes (slotted holes, shaped cuts, etc.). With the engraving equipment: ability to engrave letters or numbers for part identification. Allows, among other things, marking of tubes with sufficient depth to ensure legibility after painting or galvanizing Secure holding of the bar during milling: the bar is clamped in the movable vice system to ensure proper machining while minimizing vibrations. Improved positional tolerance of one hole relative to another within a group of holes (within a maximum length of 150 mm) Additional features Cycle for centre punching, countersinking, tapping, deburring, and chip breaking Automatic measurement of tool length (HSS) Side and centre tool cooling Hedpoy R Tk Rjfx Abhep 230-ton shear Feature Mobile hydraulic shear Straight cut Average cutting time: approximately 2 to 2.5 seconds Capacities: HEB 140 IPE 300 IPN 280 Angle bars 150x150x18 L 200x100x14 UPE 300 UPN/UPAF 300 Flat bars 300x20

Condition: used, Year of construction: 2011, total height: 3,000 mm, total length: 5,000 mm, total width: 3,000 mm, overall weight: 12,700 kg, spindle motor power: 18,000 W, DMG DECKEL MAHO DMF 180 travelling column machining center,equipped with Heidenhain iTNC 530 control.Machine equipped with 40 bar through-spindle coolant (IKZ), 60-position tool magazine (chain type with double gripper), chip conveyor, electronic handwheel, air blast through spindle, M&H infrared probe and full enclosure.Table size approx. 2,100 x 700 mm.Operating hours: control ON approx. 63,700 h, machine ON approx. 22,500 h, cutting time approx. 7,750 h Spindle performance: 18 kW Hedpoy Tkdgsfx Abhop Control: Heidenhain iTNC 530 ShopMill Travel Y-axis: 700 - mm Tool Changer: Yes Dimensions (LxWxH) approx.: 5000 x 3000 x 3000 mm Tool holder type: SK 40 Travel Z-axis: 700 - mm Weight approx.: 12,700 kg Travel X-axis: 1800 - mm Grinding spindle speed: 14000 - rpm Year of construction: 2,011 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 10019824, cutting speed: 1,10,000 mm/min, cutting range round steel at 90°: 320 mm, overall weight: 1,600 kg, saw band length: 5,300 mm, TECHNICAL DETAILS Hodpjzdi U Nofx Abhop Cutting capacity for round steel at 90°: 320 mm Cutting capacity for flat steel at 90°: 520 x 320 mm Smallest dimension for cutting (round): 10 mm Smallest dimension for cutting (flat): 10 x 8 mm Cutting speed: 15 - 110 m/min Saw blade dimensions: 5,300 x 34 x 1.1 mm Shortest remaining material length: 40 mm MACHINE DETAILS Drive power: 2.6 kW Total drive power: 3.7 kW Dimensions & Weight Installation dimensions (L x W x H): 3,100 x 1,100 x 2,200 mm Weight: 1,600 kg EQUIPMENT Available manuals Numerous saw blades

Condition: excellent (used), Year of construction: 2010, operating hours: 6,848 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 20 rpm, rotational speed (min.): 3,000 rpm, overall weight: 21,600 kg, power: 28 kW (38.07 HP), CNC Bed Type Milling Machine, LAGUN, GBM 42 with iTNC530; Year of manufacture: 2010 - X axis travel: 4000 mm - Y axis travel: 1200 mm - Z axis travel: 1500 mm - Table size: 4200 x 1000 mm - Spindle speed range: 20 - 3000 rpm, 34.5/28 kW - Spindle taper: SK 50 DIN69871A - Through-spindle coolant (IKZ): 24 bar - Air blast through spindle - Tool changer: 24 stations - Linear scales: on all 3 axes - Control system: Heidenhain TNC530i - Power-on hours: 25,474 h - Program run hours: 6,848 h - Electronic handwheel: Heidenhain HR410 - Chip conveyor - Automatic milling head in 2 planes, 2.5 degrees - Heidenhain digital drives with Siemens motors - Automatic 2-speed ZF gearbox - Heidenhain linear scales on all three axes with overpressure system - Coolant pressure adjustable in 4 stages via M-function, optional compressed air through the spindle - Control cabinet with active cooling unit - Total power: 28 kW - Machine weight: 21,600 kg - Space requirement (W x D x H): 10 x 6 x 3.8 m Hsdpfxoy Iduue Abhop - Single-shift operation - Condition: very good

Condition: excellent (used), Year of construction: 2001, operating hours: 8,155 h, functionality: fully functional, feed length X-axis: 1,800 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,000 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 50 rpm, table width: 850 mm, table length: 2,000 mm, overall weight: 13,500 kg, power: 30 kW (40.79 HP), CME FS-2 bed milling machine with only 8155 hours control Heidenhain 426B Hjdjquqq Ajpfx Abhjp incl measuring probe and complete set of manuals

Condition: used, Year of construction: 2014, machine/vehicle number: 0102-260010, The Behringer HBP413A bandsaw automatic is an economical metal bandsaw for automated 90° cutting operations in industrial production. The HBP413A bandsaw automatic offers a cutting range for round material from 10 mm to 410 mm and for flat material from 10 x 8 mm up to 500 x 400 mm, with a saw blade dimension of 5,800 x 41 x 1.3 mm. The frequency-controlled saw band drive has a motor power of 5.5 kW and offers steplessly adjustable cutting speeds from 20 – 140 m/min (66 – 459 ft/min). The cutting speed can be set and monitored on the control panel. The total drive power is approx. 7.5 kW. Special equipment: chip conveyor, micro-dosing unit, and vertical bundle clamping device at the feed gripper and in the sawing area. Hedpfey D Immsx Abhep

Condition: good (used), Year of construction: 2016, spindle speed (max.): 3,500 rpm, overall weight: 6,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore: 86mm With jacket tube.:78mm Turret head: 12 main positions 12 secondary positions, BMT65 connection, Programmable hydraulic tailstock: MT5 Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw S2max=5000 1/min X movement range: 260mm Hjdpfx Abowtg Inshop Z axis movement range: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed: 30m/min Automatic tool measurement with probe arm Weight: 6000 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, OPPORTUNITY – IMMEDIATELY AVAILABLE HYDRAULIC HIGH PERFORMANCE BAND SAWING LINE Hodpfoxwqm Hsx Abhsp MANUFACTURER: BEHRINGER MODEL: HBM 440 A PC-E YEAR OF MANUFACTURE: 2015 Sawing capacity round: 440 mm Sawing capacity flat (W x H): 440 x 440 mm Minimum round / flat: 30 mm / 20 x 20 mm Saw blade dimension: 6700 x 54 x 1.1 mm Drive power: 11 kW Cutting speed: 20 – 200 m/min Material feed per stroke: 600 mm Material feed, multiple: max. 5400 mm Machine weight: 8,200 kg Dimensions (L x W x H): 6500 x 5000 x 2700 mm Transport height: 2400 mm Specifications subject to change – errors excepted Equipment: - Coolant system 200 l - Full enclosure of the saw - Material infeed support, 1650 mm length - Chip conveyor - BEHRINGER CNC dialogue computer IP 65, BEHRINGER dialogue control IP 65 - Automatic bar change - Sorting unit in portal design: - Usable stroke of gripper: 4660 mm - Depth of storage: 2000 mm - Max. cut-off length: 4000 mm - Max. single workpiece weight: 1500 kg - Infeed magazine KM 45 F-VR / 600-6,200: - Round material: 50 – 440 mm - Flat material: 40 x 20 – 400 x 400 mm or 440 x 430 mm - Bar length: 600 – 6200 mm - Powered roller conveyor: 6100 mm - Usable material storage: 3000 mm - Safety fence PRIOR SALE AND AVAILABILITY RESERVED

Condition: good (used), Year of construction: 2012, travel distance X-axis: 1,800 mm, travel distance Y-axis: 700 mm, Vertical Machining Center Machine type: DMG DMF 180|7 Control system: Siemens 840 D solutionline Year of manufacture: 2012 TECHNICAL DATA: Travel distances: X-axis: 1,800 mm Y-axis: 700 mm Z-axis: 700 mm Feed rate (X/Y/Z): 40 m/min Rapid traverse (X/Y/Z): 40 m/min Spindle speed range: 20 - 14,000 rpm Spindle motor: 18.9 / 14 kW Tool holder: SK 40 Tool positions: 30 Table size: 2,100 x 700 mm Max. workpiece weight: 1,500 kg Workpiece height: 550 mm Connected load: 19 kW Space requirement (LxWxH): 5.533 x 4.231 x 2.693 m Machine weight: 13,000 kg Hjdpfxsy Rk Nwe Abhop Features: Chip conveyor

Condition: used, Year of construction: 2009, machine/vehicle number: 0102-250002, The Behringer HBP310-523GA double mitre bandsaw is a high-quality, robust machine that has been specially designed for professional use in metalworking. It offers an excellent combination of performance, precision and versatility, making it suitable for a wide range of applications in the industry. The HBP310-523GA is sold including roller conveyor in the infeed and outfeed side, feed gripper system and cross feed system in the outfeed area. The machine is in very good condition. Working areas of the HBP310-523GA saw Mitre left 75° round 310 mm, flat W x H = 520 x 310 mm 60° round 310 mm, flat W x H = 450 x 310 mm 45° round 310 mm, flat W x H = 350 x 310 mm 30° round 230 mm, flat W x H = 230 x 310 mm Mitre right 75° round 310 mm, flat W x H = 500 x 310 mm 60° round 310 mm, flat W x H = 420 x 310 mm Hjdpfxoyh Ixaj Abhsp 45° round 270 mm, flat W x H = 270 x 310 mm Minimum round: 20 mm Maximum material length: 10 m