Band saw

BEHRINGER HBP 530-1104 GA

Condition: used, mileage: 4,10,900 km, fuel type: diesel, color: yellow, emission class: euro3, Year of construction: 2005, MAN TGA 35.430 Year 2005 DIESEL/ Euro 3 Km. 410.900 Automatic transmission/ Displacement 10518/ KW 316 GVW 320 q. Load capacity Kg. 11.900 (without body) Wheelbase mm. 5.300 HOOKING BODY mm 6200 tailgate up to 5000 - H int. 1000 HOOKING MULTILIFT HIAB XR 21 Z 59 Lajdpfx Aaewna Rfjnsk HIAB 422 E-5 HiPro crane + JIB 100X-4 Crane year 2011 4-extension antenna Radio control JIB tip activation for clamshell bucket Air-conditioned truck

Condition: excellent (used), Year of construction: 2001, Vacuum tempering furnace Manufacturer: BMI year of construction 2001 Lasdpovcyf Tofx Aansk Maximum temperature: 750°C Year of construction: 2001 Batch size: L X W X 1200 X 600 X 600mm Heating: Electric Heating capacity 100 KW

Condition: new, Year of construction: 2025, 3D hole table 2000 x 1000 x 200mm, 100mm grid, plate thickness 22mm, hole diameter 28mm, precision-machined, very solid, weight approx. 750 kg. Ljdpfxow H Abkj Aanjak Includes table base suitable for all standard accessories with 28mm. Price is without accessories, accessories as shown special price €250. Plasma nitriding €800 extra (impact-resistant, scratch-resistant, stainless). Shipping within Germany €250.

Condition: excellent (used), Year of construction: 2003, pressure: 13 bar, 1 fired steam boiler ----- Manufacturer : LOOS Gunzenhausen Type : U-HD 1250 Ledpouugi Sjfx Aanjak Heating surface approx. : 20 sqm Boiler capacity max. : 1.250 kg/h Operating overpressure : 13,0 bar increased test overpressure : 24.05 bar Water content at NW approx. : 993 l Water content full approx. : 1,365 l Year of construction : 2003 CE mark : 0036 equipped with Weishaupt gas burner type G7/1-D, ZMD-LN, 250-1,550 kW, 15-500 mbar, gas control system, switch cabinet, feed water pump and the existing coarse and fine fittings. Econmizer: Eco 3, 82 kw, 31 bar, 238°C, 28 ltr.

Year of construction: 1989, condition: excellent (used), Article number: MA1060 Manufacturer: Fasti Laedod Ac D Rjpfx Aanjk Type: 509/40/6 Year of construction: 1989 Machine number: 5888 Control: Omron was renewed in 2012 Length [mm]: 4850 Width [mm]: 2450 Height [mm]: 2100 Weight [kg]: 10900 Power supply: 380V / 16.5 KW Working range [mm]: 4000 Maximum sheet thickness [mm]: 6 Blade length: 4000 Length stop: front 5000 mm / rear gauge 1000 mm Accessories: manuals / schematics

Condition: good (used), Year of construction: 1979, Complete production line for Technical and Commercial Chain Manufacturer - WAFIOS / VITARI / DANIELI / IPSEN Year - 1979/1989 Factory Consists : - Welding machines 14 pieces - Bending machines 10 pieces - Bending + welding machines - 2 pieces ( Wafios KEH3 +KER3 ; Wafios KEH5 + KER5 ) - Wire drawing line 7 blocks - Danieli with spooler - Cementation furnace - Annealing furnace Lots of sapare parts Lsdpfxsqy E I Ue Aanoak

Condition: excellent (used), Year of construction: 2007, Lot of 36 pillar cranes Lifting capacity 500 kg to 2000 Kg Price 89.000 Euro Ljdpfxel R Izbo Aanjak

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min Laodpfxofg E Hpe Aanek total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, Year of construction: 2021, Press brake Bernardo AKPL 1600 x 40 Technical data: Pressure force: 40 to bending length: 1600 mm distance between stand:1200mm stroke length: 100 mm Backgauge: 0 - 500 mm Projection: 200 mm Laodoftuywjpfx Aansk table width: 150 mm table height: 760 mm Forward speed: 60 mm/sec Bending speed: 8 mm/sec Return speed: 60 mm/sec. oil tank: 130 litres Engine power: 4,0 kW width: 2050 mm depth: 1800mm height: 2030mm Weight ca.3030 kg

Condition: ready for operation (used), Year of construction: 2022, A fast-erecting tower crane Liebherr is available. Tower height: 22.8m, max. outreach: 25m, max. load capacity: 2500kg, hook height: 19.1m. Machine dimensions X/Y/Z: approx. 12000mm/2500mm/3500mm, weight: approx. 11300kg, control: radio control, operating hours: 8507h, load hours: 113h, next safety inspection (UVV): 06/2024. Includes bottom-slewing mechanism, 4x setup spindles with base plates, and jib. Documentation available. An on-site inspection is possible. Lsdpjxaphzsfx Aanoak