Bandsaw - Horizontal

BERG & SCHMID GBS 185 Eco AutoCut

Condition: new, Year of construction: 2026, The CORMAK HBS275 band saw for cutting tubes, profiles and bars is widely used in all locksmith and metalworking workshops where precision, quality and cutting speed matter. The model is equipped with a 0-60° swivel arm; the saw guides are based on sintered carbide. The frame construction ensures accurate and quiet operation. Machine characteristics The horizontal metal band saw with swivel arm enables cutting in a plane perpendicular to the axis of the material being cut and at any angle within the range from 0 to 60°. The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide plates and bearings. This has a major impact on blade guidance, service life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and blade. The machine is equipped with an efficient coolant pump with a closed coolant circuit. The saw arm is made of a single cast-iron casting and, together with the 27 mm wide cutting blade used in this saw, fully enables multi-series cutting of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The blade guides are equipped with hard metal plates – sintered carbide and a rolling bearing system. It is precisely the SINTERED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The arm has been inclined at an angle of 25°, which increases blade durability and improves cutting conditions. A cleaning brush is mounted at the bottom of the arm to achieve excellent cleanliness and blade operation. The machine drive is transmitted via a worm gearbox. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The shape of the upper part of the base forms a tray for draining coolant and collecting chips generated during material cutting. A cast-iron work table with a swivel arm and a control panel on a separate arm is mounted to the base. In the cutting process, the main cutting movement is the movement of the cutting blade, while the feed is the lowering of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic cylinder. The feed speed is adjusted on the saw control panel. Two cutting blade speeds are available: 37.5 and 75m/min. In the lower position of the arm (after cutting the material), the cutting blade drive is switched off automatically. Safety is ensured by cutting blade guards and micro-switches that stop the motor after the cutting cycle is completed or when any guard is opened; additional protection consists of automatic shutdown of the saw in the event of cutting blade breakage. The machine drive is transmitted by a motor with a worm gearbox. The motor with thermal fuse protects against overheating during operation. Technical data TOTAL POWER 1.5kW Codpfxsudi Uno Aizori POWER SUPPLY 400V 50Hz ARM LOWERING ADJUSTMENT hydraulic cylinder BLADE LENGTH 2450 x 27 x 0.9 mm BLADE SPEED 37.5 / 75m/min VICE BASE HEIGHT 900 mm MACHINE DIMENSIONS (WITH ARM RAISED) (L x W x H) 1720 x 800 x 1800 mm WEIGHT 215 kg

Condition: new, Year of construction: 2026, CORMAK Z5020 BF Vario Column Drill Press is a versatile and modern metal drilling machine designed for intensive operation in industrial plants, locksmith workshops, and maintenance departments. The machine provides excellent stability, precision, and high working comfort thanks to stepless spindle speed adjustment and an ergonomic design. Main advantages of the machine Stepless spindle speed adjustment – a range of 190–2700 rpm allows optimal adjustment of parameters to the type of material being processed. Rigid machine body construction – minimizes vibrations and improves drilling accuracy. Height-adjustable worktable – precise rack adjustment and the possibility of tilting within a range of ±45°. Electronic speed indicator – provides real-time control of drilling parameters. Laser pointer and LED lighting – facilitate tool positioning and improve visibility of the working area. 100 mm machine vice included – the machine is ready for operation immediately after setup. Construction and technology Cjdpfevuf Ikex Aizori The CORMAK Z5020 BF Vario column drill press is equipped with a stable 70 mm diameter column and a wide 480 × 290 mm base, ensuring excellent support and rigidity of the entire structure. The standard MK2 spindle features a 120 mm stroke, allowing deep drilling without the need to reposition the workpiece. The worktable design enables rotation and tilting, allowing the operator to precisely adjust the position of the workpiece according to the machining operation. Precision and work efficiency The powerful 750 W motor and maximum drilling capacity of 20 mm enable effective machining of most metal materials. The electronic speed indicator and drilling depth stop provide full control over the process. The long column and large table height adjustment range (660 mm) allow machining of taller workpieces and the use of tools with larger reach. Applications The Z5020 BF Vario model is a metal column drill press recommended for: mechanical and locksmith workshops, maintenance departments, light and medium industry, prototype work and single-piece production. Standard equipment 100 mm machine vice Laser drilling pointer LED work light Electronic speed indicator Three-arm spindle feed lever Drilling depth stop Worktable with rack height adjustment Technical specifications Parameter Value Maximum drilling diameter 20 mm Spindle speed range 190–2700 rpm Power supply 230 V Spindle taper MK2 Maximum spindle stroke 120 mm Spindle-to-column distance 170 mm Spindle-to-base distance 1060 mm Table height adjustment range 660 mm Column diameter 70 mm Table dimensions 280 × 280 mm Base dimensions 480 × 290 mm Motor power 750 W Machine height 1650 mm Weight 75 kg

Condition: used, functionality: fully functional, gearing type: automatic, fuel type: electric, next inspection (TÜV): 10/2025, Year of construction: 2020, operating hours: 900 h, Equipment: UVV, crane, low noise, rubber tracks, tip top condition! Codevriuvepfx Aizori

Condition: used, Year of construction: 2015, front tire size: 540/65R30, rear tire size: 650/65R42, Equipment: compressed air brake, Gearbox NEW !!! / Crodpfor Nwkxsx Aizoi

Condition: new, distance between shaft and table: 470total power requirements: 2,2 kwweight approx.: 1,2messurements (LxWxH): Länge2400 mm Breite/Tiefe2160 mm Höhe2300 mm Gewicht 1200 kgspindle rotation speed: 60 4200 min¯¹ Csdpfjd H Hhzsx Aizsri

Condition: good (used), Trolleys, transport trolleys, wheelchairs, transport dog -Angle frame: 825 x 550 x 230 mm -Frame support height: 200 mm -Angle frame made of: stainless steel (VA) -Rolls: made of polyamide -Diameter: 160 mm -2 swivel casters and 2 fixed casters Credpob A Htiefx Aizoi -Quantity: 24 pieces available Price: per piece -Weight: 13 kg

Condition: used, Year of construction: 2007, grinding length 600 mm Codpoykmqvsfx Aizeri grinding width 400 mm workpiece height 375 mm Gewartet und Längsachse neu eingeschabt Glasmaßstäbe in der Senkrecht- und der Quer-Achse Schleifscheine 300/50/76,2 mm Magnetspannplatte 600x400mm mit Haftkraftregelung Universal-Papaierfilterautomat UPF100 mit 280l Tankinhalt.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, type of input current: three-phase, overall weight: 2,200 kg, coolant pump power: 180 W, saw band length: 4,570 mm, saw band width: 41 mm, AMADA HFA 400 – Automatic Band Saw for Metal Cutting Serial production | AMADA reliability | Industrial use The AMADA HFA 400 is an automatic horizontal band saw for metal, designed for accurate, repeatable cutting in serial production environments. This model combines a compact footprint with a rigid structure and proven AMADA Machine Tools technology. With a solid machine weight of 2200 kg and fully automatic cutting cycles, the HFA 400 is ideal for manufacturing plants, service centers, and tool rooms. ● automatic band saw for metal ● trusted brand AMADA ● rigid construction – 2200 kg ● 5.5 kW saw motor ● industrial hydraulic system ● automatic cutting cycles ● high precision and repeatability ● suitable for solid materials and profiles Technical specifications ● Model: AMADA HFA 400 ● Type: automatic band saw ● Saw motor power: 5.5 kW ● Hydraulic motor: 1.5 kW ● Coolant pump: 0.18 kW ● Blade dimensions: -length: 4570 mm - width: 41 mm - thickness: 1.3 mm ● Power supply: 3-phase ● Connected load: 11 kVA Cjdpfx Aisyc H Ewjzsri ● Machine weight: approx. 2200 kg ● Year of manufacture: 2012 Condition: used, fully functional, ready for operation 📩 Contact us for price and further details.

Condition: good (used), Year of construction: 2014, Cutting range examples: Csdpfszrmk Rjx Aizori at 90° 260mm round 300x260mm rectangle at 45° left or right 200mm round 180x180mm rectangle at 30° left or right 130mm round 120x120mm rectangle Quick miter adjustment from 30° to 150° in stepless increments of 0.5° as indicated on the scale. The miter pivot point is the intersection between the saw blade and the material support, thus preventing any change in the length dimension. End stops at 30° + 45° left and 30° + 45° right Manual material clamping. In every angle position of the saw frame, the material is clamped parallel at 90°. Cutting pressure is reduced by the self-weight of the heavy, torsion-resistant saw frame and fine adjustment depending on the material cross-section via a hydraulic damping cylinder. MEBA Micro-Dosing System complete with spray head. Machine stand with chip collection tray. with the option of hydraulic lifting of the saw frame.

Condition: new, Year of construction: 2026, CORMAK TS250 / 230V Table Saw The CORMAK TS250 / 230V is a professional table saw designed for woodworking shops, craft workshops, and furniture manufacturers looking for a reliable machine for accurate and efficient cutting of wood and wood-based materials. Its compact dimensions, robust construction, and single-phase power supply make it an excellent choice for users with limited workspace who still require high precision and performance. Main advantages of the machine 254 mm saw blade diameter – enables cutting materials up to 80 mm thick at a 90° angle. 2.2 kW (S1) / 3.1 kW (S6) motor – provides stable power even during intensive operation. Blade speed of 4000 rpm – ensures clean and smooth cutting results. Blade angle adjustment from 90° to 45° – allows precise bevel and angled cuts. Efficient sliding table – with up to 1000 mm travel, ideal for formatting larger workpieces. 620 mm cutting width on the right side of the blade – enables processing of wide panels and furniture boards. Compact design and 230V power supply – allows operation in workshops without access to a three-phase electrical system. Design and technology The TS250 / 230V is based on a stable steel frame that provides high rigidity and effective vibration damping, resulting in improved accuracy and operator comfort. The spindle is powered by a 2.2 kW motor (S1), allowing long-term continuous operation, while the increased S6 power rating of 3.1 kW provides additional performance reserves when cutting harder materials. The blade height and angle adjustment system is based on precise guides and trapezoidal screws, ensuring stable settings even during extended operation. The working table height of 890 mm has been ergonomically designed for comfortable operation. The parallel fence and sliding table provide secure and accurate material guidance along the cutting line. Precision and working efficiency The CORMAK TS250 table saw enables precise cross-cutting and rip-cutting operations. The maximum cutting depth of 80 mm at 90° and 56 mm at 45° allows processing of most standard wooden components. The rigid construction and accurate blade guidance at 4000 rpm ensure smooth cutting edges and minimal material waste. Applications The TS250 model is suitable for: Woodworking workshops – for manufacturing furniture, cabinet fronts, frames, and structural components. Service workshops – wherever mobility, compact dimensions, and high precision are required. Craft workshops – for professionals working with various wood species. Individual users – who have access only to single-phase power but require industrial-level cutting quality. Standard equipment Carbide-tipped saw blade 250 × 30 × 2 mm Parallel rip fence Cjdpfx Aijvxhhzjzori Sliding table Blade guard Integrated blade height and angle adjustment system Optional equipment Dust extraction system with 100 mm port Format sliding table for larger workpieces Additional saw blade sets Technical specifications Parameter Specification Maximum blade diameter / bore 254 mm Blade speed 4000 rpm Blade tilt range 90°–45° Maximum cutting depth at 45° 56 mm Maximum cutting depth at 90° 80 mm Sliding table travel 1000 mm Cutting width on the right side of the blade 620 mm Table height 890 mm Motor power 2.2 kW (S1) / 3.1 kW (S6) Power supply 230 V Weight 125 kg Machine dimensions 1090 × 1330 × 910 mm