Clamping plates 5100 x 2250 (2 pcs)

BERTHIEZ

Condition: used, Year of construction: 1962, faceplate diameter 2250 mm swing diameter 4500 mm Lsdpfjuc Aldsx Adwjrg turning height 2000 mm turning diameter 3150 mm workpiece weight max. 25000 kg total power requirement 55 kW weight of the machine ca. ca. 32 t required space / m

Year of construction: 1990, condition: reconditioned (used), tangential grinding machine Brand: Jakobsen Model: 1432 Lredpfxoiv S Avs Adwog Year: 1990 rpm: 1400 Grinding area: 800x400mm Table size: 1000x350mm Maximum load on table: 400kg Maximum piece height: 475mm Grinding wheel size: 350x50x127mm Heidenhain ND 221B height indicator. Magnet table 800x350mm electronic Selter with magnetization regulator. Maximum distance between table and grinding wheel: 650mm MONNET brand filter of the year 2007 Includes sets of wheels (See photos).

Condition: ready for operation (used), X-beweging: 6000 mm Y-beweging: 1500 mm Lrodpfjx Ti Uqjx Adwsg Z-beweging: 2000 mm - 2 hoofden - open kolom! - elektrisch gereviseerd in 2010 - Heidenhain digitale uitlezing - Leroy Somer elektra voor afvoer van tafel - frequentieregeling op alle assen - tafelafmetingen: 6000 x 1800 mm - voldoet aan de huidige (Franse) gezondheids- en veiligheidsvoorschriften - Belasting op de tafel: 18 ton Machine werd gebruikt in de gereedschapswerkplaats van een autofabrikant. Enkele plano freesmachine Korting op een geldbedrag Fresadoras zijn een soort pilaartjes van een kolom

Condition: good (used), Year of construction: 1979, Single column vertical turning lathe BERTHIEZ TM500 SP, as follows: Manufacturer: Berthiez (France) Model: TM500 SP Year of manufacture: 1979 Main technical data: Table diameter: 6300 mm Maximum turning diameter: 15000 mm Maximum usable height: 4000 mm Arm travel: 3600 mm Main motor power: 100 kW Maximum allowable load on faceplate: 80 t Ram size: 360x360 mm Machine weight approx. 230 tons Lsdpfx Ajx A U Raodwerg The machine can perform both turning and milling operations. Do not hesitate to contact us for any additional information.

Condition: new, 1 brand-new universal milling head "HURON" system Make: EMENA Model: V 0, ISO 40, normal Technical data: Mounting ISO 40 Projection 270 mm Rated drive power 5 HP Max. speed 1800 rpm Ljdpfjbpmv Sjx Adworg Weight approx. 32 kg Design: Standard, with adapter plate / mounting flange finished on the head side, unmachined on the machine side, for retrofitting to conventional, NC or CNC milling machines or drilling machines of any kind, "HURON" system Option: - Raised version Delivery time: approx. 3 months, after receipt of order and payment Illustrations are similar! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: ready for operation (used), Year of construction: 1979, VTL BERTHIEZ (France) TM 500 8P Model: TM500 8P Year of manufacture: 1979 Chuck diameter: 6,300 mm Max turning diameter: 15,000 mm Max workpiece height: 4,000 mm Ram travel: 3,600 mm Main motor power: 100 kW Max workpiece weight: 80 t Lrjdpfx Adex Dbydjweg Section of side tool post: 360x360 mm Side tool post travel: 2,500 mm Approx. machine weight: 230 tons Video available Milling and hobbing heads available

Condition: used, Year of construction: 1982, BERTHIEZ 9330 vertical lathe with 2-axis digital readout. Table diameter 1400mm, swing 1700mm, under crossrail 1170mm. Equipped with lateral carriage. Speeds: 160rpm / 37kW. Weight: 15t. Lsdpfx Adjxwx Acsworg

Condition: used, Year of construction: 2019, turning diameter 400 mm turning length 584 mm greates pass round over bed 750 mm control Siemens 828 D Shop Turn spindle passage 81 mm spindle speed: 3500 U/min spindle motor 18,5/22 kW max. torque on the spindle 410 Nm Lsdpfx Aeww Nazedwsrg no. of tools in turret 1 12 BMT 65 driven stations 12 BMT 65 speed of driven tools 5000 U/min drive milling spindle MK 5 kW y-axis +/- 60 mm rapid traverse 30/30/10 m/min tail stock MK 5 range L-W-H 4,6 x 1,9 x 2,1 mm weight of the machine ca. 6,65 t CNC lathe with driven tools, Y- axis and sub spindle - 3 jaw chuck Kitagawa Ø 250 mm - Chip conveyor - partscatcher with box into door - signal lamp - 2 +2 driven toolholder - some fixed toolholder - boxway system - tool measuring - programmable tailstock - coolant 23 bar - bigger coolant tank 225 ltr. - double cartridge filter - coolant gun - two steps coolant pressure

Condition: ready for operation (used), Year of construction: 1978, CNC vertical lathe Manufacturer: BERTHIEZ Model: TFM 200 Year: 1978/1995 CNC: NUM 1062T / SOMAB PL+S3 (Teach-in, ISO and Conversational modes) Specifications: Table diameter: 2,000 mm Maximum swing: 2,300 mm Usable height: 2,000 mm Table load capacity: 20 t Table rotation speeds: 1.6 – 200 rpm Table motor power: 55 kW Ram section: 200 x 200 mm Standard table height from floor: 731 mm Lsdpfx Adjw Adpbowjrg Vertical traverse stroke: 1,300 mm Traverse movement speed: 400 mm/min Vertical ram travel: 1,600 mm Right carriage travel (from table axis): 1,280 mm Left carriage travel (from table axis): 400 mm Continuous feed rate range: 0.05 – 24 mm/rev CNC programmable feed rate: 0.2 – 360 mm/min Rapid traverse: 6,000 mm/min Equipped with: 12-position tool changer Chip conveyor

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 5005 + 5006, turning length: 6,500 mm, turning diameter: 500 mm, spindle motor power: 7,500 W, spindle speed (min.): 5 rpm, spindle speed (max.): 500 rpm, travel distance X-axis: 700 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 6,500 mm, rapid traverse X-axis: 6 m/min, rapid traverse Z-axis: 6 m/min, type of input current: three-phase, torque: 12,500 Nm, workpiece weight (max.): 10,000 kg, total height: 3,800 mm, total length: 16,000 mm, total width: 6,000 mm, quill diameter: 200 mm, quill travel distance: 300 mm, swing diameter over bed slide: 950 mm, center height over cross slide: 900 mm, Equipment: documentation/manual, rotational speed infinitely variable, NC turning and milling center, manufacturer Berthiez Two machines available Serial numbers: 5005 and 5006 Unit price: €20,000 Three-jaw chuck 50-position tool changer for milling tools Tool changer for turning tools Chip conveyor Lodpfx Adswa In Njworg Tool holder SK50 2 steadies Tailstock Control unit: Siemens Sprint 8ME Included in the offer: milling angle head, drilling angle head, grinding attachment EB22 Dismantling and transport are the responsibility of the purchaser.

Year of construction: 2001, condition: used, Cazeneuve Maxica 590 With collet Ledpfx Adjh Aylvewerg Control: SOMAB NUM SP + S 5