SUCTION CUP 131.5X75X74 WITH BASE

BIESSE

Condition: used, machine/vehicle number: 008374, Max. panel width: 1000 mm Max. panel length: 2500 mm Rodpfx Agjyng Ame Nop

Condition: used, Year of construction: 1997, - edge banding unit Rodpfxod Inkte Ag Njp - Cross-cutting unit - Milling unit - Fine trimming unit - scraper - buffing unit

Condition: used, machine/vehicle number: 008437, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 12 m/min Maximum panel thickness: 60 mm Rsdpfx Asyng Agsg Njp Operating Units: 7 nr

Condition: used, machine/vehicle number: 008438, Max. panel width: 4500 mm Max. panel length: 4500 mm Main saw blade projection: 80 mm No of Grippers: 8 Rsdpfsyngy Sjx Ag Nop

Condition: good (used), Year of construction: 2009, functionality: fully functional, Cutting and machining center for PVC frame profiles and mullion profiles. The machine consists of a loading magazine, saw module, G-module for PVC processing, cross table for manual insertion of steel reinforcements, screwing module with an automatic underscrewdriver, drilling module for dowel holes, longitudinal saw for mullion profiles, and outfeed table with hand screwdriver for the strike plates. Rsdpfoxbdnrex Ag Nop Available end of September 2025.

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2009 Single-sided automatic edge banding machine Rodpfxjv R Nk Us Ag Nop with CNC control, 10" touch screen Industrial conveyor chain 1 1/4" Joint milling unit FI-502 Glue application unit VC-710 End trimming unit IN-801 Top and bottom flush trimming unit RS-100 2 motorized multifunction profiling units - contour milling unit CR-202 (FAST system with 4 standard positions) Scraper unit RBK-503, NC 2 positions Flat scraper RCC-701 Workpiece thickness: 10-65 mm Max. workpiece height with contour milling unit (depending on profiles): 35-65 mm Edge thickness from roll: 0.4-3 mm Edge thickness from strip material: 0.4-22 mm (depending on unit) Minimum workpiece length: 140 mm Minimum workpiece width (with length 140 mm): 85 mm Minimum workpiece width (with length 250 mm): 50 mm Feed speeds: 10-14-18-20 Central extraction connection: 200 mm Extraction connection, edge banding: 80 mm Extraction connection, joint milling: 120 mm Glue pot capacity: approx. 3 kg Heat-up time at half fill: approx. 10 min Length: 6000 mm Width: 1780 mm Height: 1770 mm Machine is offered without the workpiece return unit shown in the pictures Availability: short-term Location: Flörsheim

Condition: used, The BIESSE SAND REGAL 1350 is an industrial wide belt sander designed for calibration and fine sanding of flat components in the furniture and panel production industries. The REGAL series represents a robust production solution suitable for medium to high production volumes. The machine features a modular design, allowing for a combination of calibration and finishing operations in a single pass, which significantly increases productivity. Rjdjynb Rfjpfx Ag Nop

Condition: as good as new (ex-display), Carbide end mill Make prototype H 4 1200 17 10 2 10 x 22 / R 2 2 units available Redpfxsdwbklj Ag Nop

Condition: used, machine/vehicle number: 008172, X axis working area: 6200 mm Y axis working area: 1535 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Rsdpfx Agox A Tbqs Nep Number of controlled axes: 5 axes Total number of tool changer positions: 22

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Working area 2,893 x 950 mm 6 traverses with 12 suction cups Milling spindle with ISO 30 tool holder, 3.6 kW, Drilling unit: Redpfxoymmr Eo Ag Nsp 10 vertical drills 6 horizontal drills Grooving saw, 6-position tool changer. Control unit N500 Color display Total connected load: 10 kW 400 V, 50 Hz

Condition: used, Year of construction: 2007, machine/vehicle number: 1782385, functionality: fully functional, Schirmer BAZ 1000, year 2007, in very good condition, fully operational, still installed and in working order. Available for inspection at any time, as it is currently operating in the factory. Rodpfx Asx Ecb Sjg Nsp

Condition: ready for operation (used), Year of construction: 2010, number of axes: 5, This 5-axis BIESSE ROVER C9.5 was manufactured in 2010. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), 25 vertical and 6 horizontal spindles, and a 5-axis electric spindle (11 kW HSK F63). It boasts high travel speeds (X/Y: 100 m/min, Z: 30 m/min) and a total installed power of 35.7 kW. If you are looking to get high-quality woodworking capabilities, consider the BIESSE ROVER C9.5 machine we have for sale. Contact us for more information. • Working Area: X=4600 mm, Y=1935 mm, Z=275 mm Redpfx Asx Tka Ujg Nsp • Travel Speed: X-axis: 100 m/min, Y-axis: 100 m/min, Z-axis: 30 m/min • Vertical Spindles: 25 • Horizontal Spindles: 6 • Tool Changer: Revolver type with 8 positions, Chain changer • 5-axis Electric Spindle: 11 kW HSK F63 • Installed Power: 35.7 kW

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 4,600 mm, travel distance Y-axis: 1,935 mm, travel distance Z-axis: 275 mm, number of axes: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine includes a vacuum system, a conveyor belt for chip removal, and a liquid cooling unit. If you are looking to get high-quality CNC machining capabilities, consider the Biesse Rover C9.50 machine we have for sale. Contact us for more information. Worktable and clamping • 8 ATS plate holders (L = 1525 mm) and 24 slide rails • Automatic positioning of plate holders and slide rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right), with pneumatic system • 4 removable center stops, stroke 140 mm (2 left + 2 right), with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules)Vacuum Rsdjx D H Hcspfx Ag Nep • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for standard vacuum systemMachining units and configuration • Composition C3-A1: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a work unit with 5 interpolating axes (units usable only when the electric spindle is vertical) • Composition C3-P2: • Additional Z slide for rear work units, controlled by an independent Z axis • BH 42 L drilling head • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle)Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional equipment • Conveyor belt for removing chips and scrap pieces (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles, or one electric spindle plus one liquid-cooled drilling head)Note: The technical data and descriptions are taken from the original order confirmation and are for information only; they are not binding.

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Condition: Function tested Equipment and technical data: Milling unit: 4.4 kW Tool holder: HSK 63 F Speed: 1,000 - 18,000 rpm Water-cooled Rjdsw I Ug Hopfx Ag Nep Tool changer: 4-position, lateral Drilling head: 9 vertical drilling spindles on a 32 mm pitch Horizontal drilling spindle: 1+1 Vertical drilling spindle: 1+1 Grooving saw in X-direction Control: Twin CAM 32 Vacuum pump: 40 cbm/h Including vacuum suction cups Travel paths: X-axis: 2,685 mm Y-axis: 1,095 mm Z-axis: 140 mm Weight: approx. 3,500 kg The machine is completely checked for all mechanical, electrical, and electronic components and overhauled where necessary. All guides checked; console guides replaced New PC control system for the TWIN CAM control All axis modules checked and serviced Location: Flörsheim Availability: by arrangement

Condition: like new (used), functionality: fully functional, Ferwood code: RS0003524 - Manufacturer code: 2420A0716 - Condition: As new (showroom item) - Functionality: Fully functional - Compatible machine: - If interested, we offer refurbishment service, please contact us. 1.5KG 36X26X21 Rsdpfxoymfgbo Ag Nsp